Doepfer A-143-1 Complex Envelope Generator / LFO

No video

Doepfer A-143-1 Complex Envelope Generator / LFO

Рет қаралды 4,174

2 жыл бұрын

In this series I will be shedding some light on a few very underrated modules from Doepfer.
Doepfer A-143-1 Complex Envelope Generator / LFO:
thmn.to/thoprod/114727?offid=...
Become a PATREON and access the patch notes:
/ detroit_berlin
____________________________________________________
Here's a link to my Modular grid page:
www.modulargrid.net/e/racks/v...
www.detroit-berlin.com/modula...
#modular #doepfer #tutorial

Пікірлер: 43

@Detroit-Berlin Жыл бұрын

What Doepfer module tutorial next? (see description for list)

@thomas854 Жыл бұрын

If your are into Techno, the A-143-1 is the perfect module to get your sequences "off the grid"

@Detroit-Berlin Жыл бұрын

that’s true and I use this module for this purpose most of the time

@heliumsoundzzz 2 жыл бұрын

It's really puzzling what's possible to obtain as quirky groove from this module that I've never been interested in before. At times I feel I'm back in old Black Dice vibes. Great thanks for the discovery and great review, I really appreciate 😉

@Detroit-Berlin 2 жыл бұрын

Thanks 🙏

@1heUndertaker 2 жыл бұрын

Your opinions and thoughts are very interesting, thank you for sharing your experiences! Looking forward to the other modules which you have. I'm just starting on the modular journey and your videos help much !

@Detroit-Berlin 2 жыл бұрын

thank you 🙏 glad you are inspired by my videos

@gunnarwaage4343 2 жыл бұрын

Thanks for this video, I have this module and I was actually working with it today, its very inspirering, Brings about quite unexpected results. A very underrated module.

@Detroit-Berlin 2 жыл бұрын

Absolutely true 😊

@richarquis 4 күн бұрын

Hey, great demo, I'm gonna look deeper into this one. I hate nano modules, I don't like anything less than 4hp. As my rack grows, I just add cases, and go with larger modules most of the time. So, 28hp is no problem for me, I have space for it. In fact, its the exact fit for replacing my drum module (Erica LXR) from the front row of my controller case, so I can put LXR back in the drum case and stick a whole bunch of utilities between controller/drums and synth cases. My controller row, at front and bottom, is only modules with jacks at the top. Rule #1 - No spaghetti in the front row. Jacks on the sides though? Between Metropolix/Gx, and Scales... It can work. Just a handy hint though... When using English "add/subtract" (+/-) you used add correctly, but one time you said "distract" (ablenken) and the other time you used detract (beeinträchtigen). When talking in math terms, in our case voltage, it's always add/subtract. Distract and detract both have an idea of taking something away, but not something physical. You take away ideas/concepts, not things. Like "I distracted the baby with a squeaky toy" or "Stop arguing about (A), you're detracting from the importance of (B.)" Sorry, I'm an English teacher, I can't help myself. Have a great day, I've come to really enjoy your videos.

@Detroit-Berlin 4 күн бұрын

@@richarquis Thanks, in case you’ll be putting it in a skiff, the module (although not extremely deep) is not skiff friendly. Yes my english has some hiccups from time to time, thanks for pointing it out I’ll try to think about it the next time 🙂 Always welcome to use my affiliate links should you buy one, it really supports the channel 👍

@assistantassistant5516 9 ай бұрын

That was really great and helpful - thank you! Gruss von LA.

@Detroit-Berlin 9 ай бұрын

thanks 👍

@briesmodular 2 жыл бұрын

I feel, and this might sound contradictory, the more modules you have the more you appreciate the ones that are a little bit bigger. In a dense patch they are much easier to navigate. In the end it's the power-supplies that are the most expensive, not the wood or even the rails, so there's no reason to cram 100 modules in 84HP as a big module doesn't necessarily drain more power.

@Detroit-Berlin 2 жыл бұрын

I totally agree 👍 I’ve always liked bigger modules and modules where the jacks are all on the top or bottom as this makes ergonomics so much better. Even 8hp modules with the jacks all over the front-plate are hard to navigate when there’s a lot of patching going on. I would say blanking panels are your best friend in that situation, I might do an episode on those 😅

@thebobbybabbitt7703 Жыл бұрын

Totally agree. As I grow my system to its size now, I don't mind adding in a 28 hp module. As long as it earns its space

@Bagfuld 6 ай бұрын

+ Very good video. I almost sold this module but now I will give it another try :-)

@Detroit-Berlin 6 ай бұрын

It’s also great when in audio range 👍 The magic happens when you get good in adjusting the 3rd and 4th knob of each row

@Bagfuld 6 ай бұрын

I look forward to try that too, thanks.

@Detroit-Berlin 6 ай бұрын

@@Bagfuld you’re welcome 😊

@rasmusnordholt-frieling8427 Жыл бұрын

Love your doepfer Videos!

@Detroit-Berlin Жыл бұрын

thank you 🙏

@marcomeyer7895 4 ай бұрын

thank you!!!

@Detroit-Berlin 4 ай бұрын

You're welcome 🙂

@danieleden1856 7 ай бұрын

Great video ! It's definitely a daunting module until you break it down like you've done

@Detroit-Berlin 7 ай бұрын

thanks 😊

@jeffehrenberg1650 Жыл бұрын

Thank you!

@Detroit-Berlin Жыл бұрын

you’re welcome 😊

@forwardmemory5940 Жыл бұрын

Thank you for this video. I’ve been into modular for 12 years and have had lots of Doepfer modules. Due to its size and not understanding it’s possibilities it’s been under my radar. Until now that is - I just picked it up after watching your video a few weeks ago. What is the filter that you use at the start of the video?

@Detroit-Berlin Жыл бұрын

thanks 🙏 I believe I was using the arp 2500 filter

@forwardmemory5940 Жыл бұрын

Thank you for replying so quickly! Do you mean the Behringer Multi Filter/Resonator 1047?

@Detroit-Berlin Жыл бұрын

@@forwardmemory5940 yes the B one 🙂

@forwardmemory5940 Жыл бұрын

@@Detroit-Berlin Thanks, I’ll order it through your link :)

@Detroit-Berlin Жыл бұрын

@@forwardmemory5940 🙏 that would be awesome

@raskolnikov1242 3 ай бұрын

Is it what the poly envelope from Verbos kinda mimics?

@Detroit-Berlin 3 ай бұрын

Sorry I’m not familiar with that module.

@66Gollum 4 ай бұрын

Maybe I missed it, but I can not make it work as simple independent 4 ADSR

@Detroit-Berlin 4 ай бұрын

make sure the switches are in AD mode, trigger each channel individually, use each output individually and it should work. It’s not an ADSR but only Attack and Decay

@Detroit-Berlin 4 ай бұрын

also note that when nothing is inserted in the trig inputs then the trig output of previous envelope is normalised to the trig input of that channel