DeWalt Cordless Shop Vac Review (MUST SEE UPDATE)

Рет қаралды 176,074

2 жыл бұрын

DeWalt cordless ship vac review. Here we review the DeWalt 20V Max 2 gal. wet/dry cordless shop vac model DCV580H and the DeWalt cordless/corded shopvac model DCV581H.
Featured Tools:
DeWalt Cordless Only DCV580H - amzn.to/3StUdnZ
DeWalt Cordless/Corded DCV581H - amzn.to/3Od0WjC
My favorite Showa work gloves 12 Pack - amzn.to/4erxhyH
(if you're between sizes, go up)
Read article:
www.toolrev.com/dewalt-20v-co...
Visit our website: toolrev.com
Business Contact: alex@toolrev.com
ToolRev participates in Amazon and other affiliate programs from which we earn commissions on purchases made through our links.

Пікірлер: 107

@toolrev 2 жыл бұрын

I have now heard from a guy who burnt the board on a 581. He said he was pulling on and off a 9 amp Flexvolt battery while the vacuum was plugged in to see the difference. He said the vacuum ramped up when he put on the 9 amp and eventually popped a circuit on the board. So there's that info. See ya!

@brianreinhardt4050 2 жыл бұрын

I was using a 60v battery on mine and it burned out the circuit board. I just deleted the circuit board and wired the battery directly to the switch...that was a year ago and it's worked fine since.

@dezign187 Жыл бұрын

Mine popped something after changing a battery. Ramped half way up and shut down. This is the only dewalt tool ive not been impressed with. Had it less than a year, hardly used it. Never for water. Didnt have good enough suction power.

@FireStalker46 Жыл бұрын

@@brianreinhardt4050 Makes you wonder why it seems that they think EVERYTHING needs a circuit board now. Good work with the simple delete.

@FirstLastOne Жыл бұрын

Your video answered exactly the questions I would have asked if I had known what I should of been asking. THANK YOU!

@1badawg66 2 жыл бұрын

I’ve had the cordless only model for years. It’s not the most suction in the world but it works really well and I’ve had no problems.

@LuminairPrime 4 ай бұрын

Best review of these out there! I just wish DeWalt would sell a version with 2x the motor power for half the battery life!

@violian5 8 ай бұрын

Thanks for the bringing up the issue with the motherboard.

@clam741 2 жыл бұрын

My bearing is shot on my 580 , no other issue of all day 5 days a week of work . I clean window openings and floor around windows after removing and installing new windows .

@Sunnbuzz 4 ай бұрын

Great short review. I do small jobs and have a small workshop set up in my apartment I'm really glad you hooked it up to the Mitre saw because I'm sick of cutting outside on my landing and the cleanup involved. I want to buy this vac for dust collection just for the 5-10 cuts I make once a month

@lightspeedguru 3 ай бұрын

Just be sure to pick up the DWV9000 universal adapter in order to connect it to the mitre saw with the AirLock dust port.

@heinricheugenvonhelmbrecht6905 11 ай бұрын

Great comparison! Thank you!

@brittanythompson1776 2 жыл бұрын

great review and demonstration! and to add a tech oriented repair at the end, thank you! will be subscribing.

@toolrev 2 жыл бұрын

Welcome!

@lordofthestings 2 жыл бұрын

I was going to buy one of these until I watched this video. I have the Dewalt weedeater and blower with the big 60 volt battery. I'm very happy with both of those tools. That vacuum looks very weak. Thanks for the video.

@toolrev 2 жыл бұрын

you bet

@CaptainSwoop Жыл бұрын

Good review. Thanks from Australia

@martinezoscar666 28 күн бұрын

what battery do i need mine keeps shutting off with the small battery i got from my drill

@sivacrom 2 жыл бұрын

Got mine for Christmas 2020 (DCV580H) and it just stopped working a few months back. Dropped it off for warranty repair and they’re telling me DEWALT won’t cover it. Don’t they have a 3 year warranty on those vacs? Has anyone been able to get them to cover this issue?

@witling Жыл бұрын

... very informative, thanks!

@AntonioClaudioMichael 2 жыл бұрын

Good informative video

@TebTengri 9 ай бұрын

was debating on this 2gal or the 0.5gal for my Freightliner

@ljburr6162 Жыл бұрын

Thanks for the great review and update.

@toolrev Жыл бұрын

No problem 👍

@filiperez2169 11 ай бұрын

Great Video!!

@birdmandave 14 күн бұрын

Awesome video. Thank you for the honest review

@toolrev 12 күн бұрын

My pleasure Birdman!

@brydgeo007 8 ай бұрын

Thanks for this video. I am shopping around for a portable vacuum and having collected Dewalt tools, 20V and 20/60V flex batteries I might end up getting this.

@toolrev 8 ай бұрын

🫡

@scottdezieck7056 2 жыл бұрын

Great video

@nateryan7041 2 жыл бұрын

excdllent review mate

@futbol1972 2 жыл бұрын

Iam debating between this one and the rigid VAC4010

@davidcanales14 2 жыл бұрын

Best review ever👌 you just won a subscriber

@toolrev 2 жыл бұрын

Cool, thanks!

@Toolspecs 2 ай бұрын

Great video!

@philipjohn4149 2 жыл бұрын

I love the ergonomics... but doesn't have a lot of suction.

@1stfloorguy59 2 жыл бұрын

I bought the cordless one and returned it the same day because I didn't even know they had corded version a few months ago.

@Grady252 Жыл бұрын

Seems time for Dewalt to update to a newer version with more suction power. They are at the bottom of the list. I was looking to buy one and keep with my current battery system but the dewalt vaccum is less than desirable. Hate to get the Ridgid and be the only tool line in use with the battery investment.

@toolrev Жыл бұрын

I'm going to review RIDGID's new 3 gal that takes a bag to see what mod, if any, it would need to fit my 60V batteries through an adapter. I like this DeWalt for small amounts of construction dust and to remove water from toilets so I won't give it up for anything larger unless it's got beast mode. Will try to get that review together next week or so.

@davido3403 11 ай бұрын

I have all Dewalt tools but at work we use a 6gal Ryobi cordless and I love it especially the wheels. Its just so easy to rollaround. I just pull it around with the hose. Thinking about getting one and a Ryobi to Dewalt battery adaptor.

@plmn93 8 ай бұрын

Yeah even Ryobi is better. This is way overdue for an update, which is why this video caught my eye, I thought maybe there was one. I guess you could argue they are choosing battery life over performance, which may be valid, but a better option would be more power and a switch for "eco" mode.

@joshuatatro4503 Жыл бұрын

5:04 -- Looks very much like that "burnt" spot is a voltage regulator, and the problem appears to be that it got so hot that it melted its own solder connection and then detached from the board... Yikes! That new board is interesting in that it omits the resistors but keeps the same capacitor arrangement. The actual controller chip on the board is clearly different as well, along with plenty of other simplifications over the original design. Hopefully that solves the problem!

@toolrev Жыл бұрын

Great comment J! 👊

@pablodignani7766 Жыл бұрын

Not a VR, a negative-channel MOSFET to feed the negative terminal of the vacuum motor if battery voltage is above 14VDC to keep batteries in the minimun secure recharge voltage. Dewalt batteries use 5 cells (or pairs or triplets) in series (5S), minimum secure voltage for li-ion cells is 2.8VDC. 2.8VDC X 5 cells = 14VDC.

@pablodignani7766 Жыл бұрын

The PCB itself is just a battery protection module that shuts off at 14VDC. Any li-ion BMS board for 5-cell series capable of at least 4 amps will do the same job. 4 AMPS is the current capacity of the inline fuse fitted to the positive terminal going from the battery accross the switch to the motor.

@keylitho Жыл бұрын

@@pablodignani7766 I figured it was just a protection module... I am going to try and put a 6s pack on it and see if it holds.. Will most likley make a large 6s pack with BMS just for my vac.. MORE POWER..!!

@kaseymaibes8800 2 жыл бұрын

bought this for my husband who has many dewalt cordless tools, but it did not come with a brush or crevice tool. Do you know where I can get an attachment set?

@toolrev 2 жыл бұрын

Not offhand. After I got my first DeWalt I thought I lost the crevice tool only to find it a few weeks later in the handle. If it's not there you should be able to find it here - www.toolservicenet.com

@uncomn 7 ай бұрын

My corded one went dead while using on flexvolt battery.

@edwinvasquezp 2 жыл бұрын

Had the same problem with the vacuum, switch didn’t turn it on. Take it to service for warranty. As soon as I get it back is for sale. Got the packout Milwaukee definitely a lot better.

@bdogjr7779 Жыл бұрын

I'm looking at the Dewalt 581 but the performance of the Milwaukee sounds better. I hear Milwaukee tools will work with Dewalt batteries. I was interested in the option of wall plug but idk if Milwaukee has a model with both options🖖😎☮

@lukesb3025 Жыл бұрын

Can you use the new lithium powerstack battery 1.7ah. Of course im expecting would be short run time.

@toolrev Жыл бұрын

yes

@dylanrobertson68 Жыл бұрын

Hi thanks for the review. I’m wondering how powerful this tool pushed air out / inflates? I’m Looking for a portable tool to inflate a raft and I need it to be powerful enough to overcome the back pressure from the raft. Would really love to see a video showing that feature of the tool

@michaelkies4224 Жыл бұрын

You should check out their inflator (Dewalt DCC020IB 20V MAX Air Inflator). I have one and it is very handy. Has both high pressure and low pressure sides.

@dylanrobertson68 Жыл бұрын

@@michaelkies4224 thanks for the recommendation. I tried one battery powered air inflator already and it didn’t have enough juice but perhaps the dewalt one will. also, I currently only have the old style dewalt Batteries so I found this shop vac tool appealing bc it can work on the old and new

@michaelkies4224 Жыл бұрын

@@dylanrobertson68 Ok, got you. I have all 20v max tools.

@dylanrobertson68 Жыл бұрын

@@michaelkies4224 ya I might have to make the switch but I don’t use my tools often so trying to hold off

@dezign187 Жыл бұрын

@@dylanrobertson68 It depends on the pressure you set it at. If you are airing atv tires at 7psi it fills kinda slow. If you push it to 30psi and shut it off at 7 psi it works fast. Probably a safety reason? It isn't super fast at 35psi, but it is so nice and compact, and in a carry case can be stashed easily.

@hed420 2 жыл бұрын

Where did you get the replacement circuit board from ?

@toolrev 2 жыл бұрын

Either DeWalt's parts portal, which is my usual go-to, e--replacementparts.

@MattieK09 2 жыл бұрын

I like dewalt but the suction and design sucks. It needs to be a box like Milwaukee and have more cfms maybe a 60v

@jon3862 2 жыл бұрын

Tanks 🤝 👍👍👍👍

@toolrev 2 жыл бұрын

👍

@Sheamus1212 Жыл бұрын

If you have a battery in the vacuum and plug it in. Does the battery charge

@toolrev Жыл бұрын

Unfortunately no, but great idea.

@calzone986 6 ай бұрын

thx

@Creature_NL 6 ай бұрын

After 1 year it only worked with the cord. As i had 3 years warranty, they've send me a brand new one with another 3 years warranty. If the filter gets wet, it doesn't suck anymore, so it's better to take the filter out.

@toolrev 6 ай бұрын

Good that it happened within the warranty.

@twoweeledsoto6072 2 жыл бұрын

knowing what I understand now from your review. I'd just avoid this vacuum altogether and not worry about what board it has. Dewalt has been good to me, but there are a few tools that just are not up to proper standard. The 20v chainsaw is another one, with their problem switch.

@dezign187 Жыл бұрын

My chainsaw works fine and 2 other friends' also. Our issue with all 3 is that they leak oil out of the bottom... Even if sat flat. Makes a fun mess in your toolbox.

@theotheo2879 7 ай бұрын

@@dezign187 I had the same issue with my dewalt 20v chainsaw. Local dewalt authorized repair shop told me it's gravity fed so that's expected unless you drain the oil after each use. I didn't want to drain, but storing on it's side with the oil fill cap facing up prevents mine from leaking.

@beckirae100 2 жыл бұрын

So even though it looks like they updated the board as of at least 2019, you'd still go for the 581h model?

@toolrev 2 жыл бұрын

I would to avoid getting one with the old board.

@tdcjonm 2 жыл бұрын

Just bought the cordless only model at Lowe's for $30.... last one in the store, manager came up to me, thought he was a dewalt rep because he's like ya want a deal ? See this vacuum, it's yours for $30 if you want it. Guess dewalt is discontinuing the 850 model so 81% discount for me I guess!

@theopasanduka4065 2 жыл бұрын

Hi guys when you use it for water do you still need the filter on

@toolrev 2 жыл бұрын

I believe DeWalt recommends it stay on but I usually take it off. Check the manual.

@lil_brucey Жыл бұрын

Does the cordless one come with the accessories

@toolrev Жыл бұрын

Yes, both come with the same accessories.

@fordpower19 2 жыл бұрын

Do you know if these are available in the UK?

@toolrev 2 жыл бұрын

I don’t, you can check their UK site. You can’t even find many In the US right now with the supply chain issues.

@fordpower19 2 жыл бұрын

@@toolrev thanks

@Cookie.x.monsterr 2 жыл бұрын

Amazon

@fordpower19 2 жыл бұрын

Thanks

@Cookie.x.monsterr 2 жыл бұрын

@@fordpower19 you may not care lol but I’m not going to buy one. I wanted to as I have dewalt stuff but I will just stick with my Henry hoover. corded. Henry’s are great I use for work all the time

@platoscavealum902 Жыл бұрын

👍

@futbol1972 2 жыл бұрын

Is there a longer hose to clean the car?

@toolrev 2 жыл бұрын

Not specifically that I know of and doubt this unit has the suction to support a longer hose.

@christopheranderson4345 2 жыл бұрын

I had the same problem with mine

@brianreinhardt4050 2 жыл бұрын

If you're using the 18/20v model the only reason the circuit board is there is for the different battery types. If you don't need to use an 18v battery, just delete the board altogether and wire the switch accordingly.

@toolrev 2 жыл бұрын

I think it's just the pins on the terminal to battery connection that determine the voltage. But the board has DeWalt's electronic protection system that prevents "overload, overheating, and deep discharge of the battery." Similar to Star and Redlink only they don't promote it like Mil and Mak. But they do discuss it in every lithium tool manual. So if you remove the board keep an eye on your power bars. Otherwise, you risk recharge lifespan. Same risk you may run using a battery adapter, which I do everyday. :)

@dontblameme6328 Жыл бұрын

I can smell that board burning in my 581. Still works but expect it to die soon.

@woojea4870 2 жыл бұрын

Man you got exactly same set up even that dewalt table..

@hardkore360 Жыл бұрын

Just on the surface it looks like a melted off voltage regulator. Manufacturers are using Lead-Free solder, so what probably happened was that the voltage regulator got too hot from extended use, and the solder just simply melted off and possibly created a short circuit. The voltage regulator should have had a heat sink on with a bolt/nut to secure the piece on to avoid this from happening. Crappy design and crappy lead-free solder = Sell more.

@toolrev Жыл бұрын

Interesting, thanks for the comment.