Dewalt DCG405N 18 volt 125mm cordless Angle Grinder Review

No video

Dewalt DCG405N 18 volt 125mm cordless Angle Grinder Review

Рет қаралды 35,901

3 жыл бұрын

This page does contain affiliate links - Hi All just a note to let everyone know that my descriptions do have affiliate links, meaning that should you click a link in the following text my channel will receive a commission should you go on and buy anything from that website.
Get yours here from FFX - rover.ebay.com/rover/1/710-53...
It's taken some time to get to a place where the battery revolution can offer a grinder that really is a decent replacement for the classic 3 pin plug. Dewalt have finally come up with a tool that is elegant in design and offers the power efficiency to last on cells. The DCG405N might not be the best out there hands down but, given that most of us probably own one to two of their 18V gadgets, its well worth considering adding it to the kit. Lets test it out!

Пікірлер: 26

@davedaniels8211 2 жыл бұрын

Purchased today for £100 on a deal from FFX - 15% off . Thanks for review.

@Matipolandscaping 3 жыл бұрын

Great video! Great bit of kit! We have the same one 👌⚒💯

@contessa.adella 2 жыл бұрын

Bought the 405FN…Flathead £145 body only, no case (Dec21). The Dewalt ‘suitcase’ from my old corded version will take the 405FN plus one 5ah batt and a few discs saving the purchase of a new TStak case. I have yet to use the Flathead in earnest, but my early impression concurs with the video…low noise and vibe are a bonus. 114 seems to be the goto grinder size for most, but honestly the extra diameter of a 125 is a game changer since the useable disc radius beyond the grinder body on a 114 disc is only about 38mm..the 125 ups that to 44mm or an extra 15% cutting depth….can make all the difference on many jobs, not to mention more “meat” on the disc to boot (You pay for it in more disc cost ‘natch!).

@michaelc7283 3 жыл бұрын

Hi, I really wish DeWalt can release this exact model in the USA. We only have the paddle style on our cordless models for some weird safety issue. Yet, we still have the corded style that have the switch on the side. Come on DeWalt even Makita has the switch on the top on their cordless model in the USA. Thanks for the video

@zylent8251 3 жыл бұрын

Paddle swith without lock button always.I hate those alide lock switches.If something happens, paddle is far better choise.

@aresmarkus6085 3 жыл бұрын

instaBlaster...

@jshorto 3 жыл бұрын

I paid £125 for mine just the shell though no battery or charger as I already have a charger and 2 batts with my jigsaw so just use them for it, my only problem is I can't get the t-stack case that this fits into as you can only get a t-stack empty case and buy foam separately and cut the foam to shape like I did for my jigsaw.

@sandyonassis5774 Жыл бұрын

I’m not surprised that your other angle grinder broke, you’re slapdash and throw your new angle grinder around. And when you’re doing a video, turn it off so we can hear you.

@man0grc 2 жыл бұрын

So do you still recommend it? I recently got into the dewalt battery tool line up with the 996 and next up is a grinder and a jigsaw.

@danreviewsitall 2 жыл бұрын

Yes I would still recommend their hand tools for sure. Have had problems with the mower and strimmer.

@man0grc 2 жыл бұрын

@@danreviewsitall I'll do some research then on a stimmer cause I definitely need one. Thanks for the reply.

@annamalainarayanan 9 ай бұрын

got this for 75$ , have not used it yet.

@kimbijkerk4304 3 жыл бұрын

Hi Can i ask what the battery life is on the job

@danreviewsitall 3 жыл бұрын

With a 5ah you are lucky to get 15mins with load. With a 9ah flex volt you get a good 25 to 30 mins.

@kimbijkerk4304 3 жыл бұрын

@@danreviewsitall damn that means that in mine line of work this is useles but thanks for the info

@contessa.adella 2 жыл бұрын

Yep. 10-15 mins will cut through plenty of bar stock and sheet steel, but is probably too short for serious steel grinding and stonework. This is why we can have several batt packs and a one hour (‘ish) charger Lol.

@8thsinner 3 жыл бұрын

Had a stupid question about this that you already answered inside 100 seconds

@danreviewsitall 3 жыл бұрын

The F has a flat head which is better at getting into tighter spaces.

@JorgeGonzalez-ei6ft 3 жыл бұрын

Any owners of this type of dewalt grinder haveing real issues undoing the locknut to replace blades?

@danreviewsitall 3 жыл бұрын

Not heard of anything. It does come with a key but so far I haven't had to use it often.

@BigLeBowski4456 3 жыл бұрын

Most of the times I've had trouble with the locknut is when the blad took a sudden big impact on the material I was cutting, causing the blade or diamond drill bit to turn slightly and then tightening the locknut. Can happen with any grinder in my experience.