In this video Mark reviews the Dewalt DCS570 brushless circular Saw.
Пікірлер: 43
@Betterworlda2 ай бұрын
Thank you for the demonstration Mark, I was bit apprehensive figuring out on my own, but I am so glad that I came across your vlog and I’m confident now that you showed me. Many thanks.
@idlersdream8262 жыл бұрын
😂 always excited to get new tools, take time opening to savour the moment 🤗. That looks to be a great saw Mark, certainly appeared to cut effortlessly & will be good to see it in action in future videos 👍.
@KAPWoodworkandbuilding2 жыл бұрын
Yes it is. Have already used it. You will see it soon
@David.M.2 жыл бұрын
I have the Ridgid brand of battery tools. The power saw is excellent. I have almost permanently retired my cordless saw since buying it. Thanks Mark.
@KAPWoodworkandbuilding2 жыл бұрын
You can’t go wrong with most of the top brands. I don’t know Ridgid but I’m sure it very good. I can see me doing the same already with my corded saw.
@David.M.2 жыл бұрын
@@KAPWoodworkandbuilding My understanding is that Ridgid is not sold in the UK. It has a lifetime warranty but is less expensive than DeWalt. DeWalts are great tools and I own a Dewalt corded drill. Just too expensive for me.
@stevehedges11582 жыл бұрын
Love the cordless gear I have the equivalent makita cordless saw. Hardly use the corded makita saw any more just keep an old blade in it for rough stuff. Better safety with out a cord as well. You probably flipped though the manual by now but I thought I saw a spanner for changing the blade under the battery. I have relatives in uk and hospitalisation are going up stay safe take care. Steve Australia
@KAPWoodworkandbuilding2 жыл бұрын
The cordless does feel so much safer . I’ve already used it quite a lot. I’m using it with my speed square and it so much quicker. I will stay safe and you also. Mark
@michaelhorn4540 Жыл бұрын
I love my Dewalt 20v and 60v saws, I have the 578 flexvolt and the 566 saw
@scrapwoodandy66002 жыл бұрын
It’s great to get some new toys. I’ve got a corded dealt saw and they are brilliant peace of kit. Just had a new toy myself lumberjack router table. Not got any battery power tools apart from my dealt drill and unpack driver. 👍👍
@KAPWoodworkandbuilding2 жыл бұрын
Great stuff Andy. The router table sounds great.
@davidrooney854610 ай бұрын
Just bought this saw and saw you use a adjustable spanner that will round the corners off It comes with its own spanner at the back
@KAPWoodworkandbuilding10 ай бұрын
Thanks for your comment I do know this now.
@Macm737 ай бұрын
Went for this model instead of the 165mm. I like to rip plywood with a straight edge and the 165mm with the motor on the right hand side feels like it’s designed for left handed people.
@jimrick522 жыл бұрын
Very envious right now Mark. I've just bought the dewalt 18v brushless impact driver but still want the circular saw. Hope to get one soon. 👍
@KAPWoodworkandbuilding2 жыл бұрын
The impact driver is a must have essential tool to have. But I use the combi drill a lot as well. I’m thinking about getting a second Combi drill as they both have very different applications.
@jimrick522 жыл бұрын
Same as you mark, I have two combi drills also but my mitre saw is evolution and I just have a generic circular saw. I want to go with dewalt all the way.
@BlindGuy39Ай бұрын
Hi, after owning it now for some time would you still recommend it? Thanks
@KAPWoodworkandbuildingАй бұрын
It’s still working fine but I’m about to add a more expensive one as well.
@creepycrawlything2 жыл бұрын
I have the smaller Dewalt 18v 165mm. Works really well used with a speed square. Always feels very much safer than with my older 240v corded saws. Great for CLS and cladding work.
@KAPWoodworkandbuilding2 жыл бұрын
I also think it feels so much safer. You don’t realise this until your using it.
@Kvik1231 Жыл бұрын
Nice saw. I have used it a fair bit for making hand held cuts. But I have noticed that the show is not parallel to the blade. In fact it is out by about 1/8". This is not a problem when making freehand cuts but becomes a problem when trying to make cuts relative to the shoe using a guide of some kind. I have checked the dewalt web site for support, but they want all your personal information down to your 5th cousin on your mother's sides birthday. What for? I just want to know if this thing can be straightened or whether it is just a cheap piece of junk? Arrg. Frustrated customer.
@KAPWoodworkandbuilding Жыл бұрын
I agree with you . It is out when using a temporary fence or guide. I’ve run into this problem a couple of times. I now only use it for freehand cuts .
@sandman26512 жыл бұрын
Ya gotta love a new toy in the workshop
@KAPWoodworkandbuilding2 жыл бұрын
Yep. Some more still to come.
@Cr4ZzZy Жыл бұрын
Thank you for this video
@Pouya822 жыл бұрын
Great Review, have had mine for over 2 years and haven't touched it because I've been too scared to operate it. I got mine in a Big Bundle Pack with other tools. Gonna help finish of my backyard deck project.
@KAPWoodworkandbuilding2 жыл бұрын
As long as you give your tools a healthy respect you will be safe.
@Smallbarnworkshop2 жыл бұрын
Nice! Problem with having these KZfaq channels is you cannot just rip into a box, you need to set the camera up first 😀
@KAPWoodworkandbuilding2 жыл бұрын
Definitely 🤣
@garancompany27209 ай бұрын
Greetings. Is it better to buy DeWalt DCS393 or DeWalt DCS570N
@KAPWoodworkandbuilding9 ай бұрын
Out of just those 2 I would go for the 570n as it gives greater cutting capabilities.
@rianmc47602 жыл бұрын
Nice circular saw. Does it not come with an Allen key to tighten the nut?
@KAPWoodworkandbuilding2 жыл бұрын
I’m not sure it does. I do have a full Allen key set if I need it.
@graham2458 Жыл бұрын
It does, it’s just under the handle
@petcatznzАй бұрын
It’s a flat spanner, not an Allen key. This is supplied with the saw and sits in a slot under the battery. It cannot be removed with a battery installed, which is a great passive safety feature.
@steventhun18136 ай бұрын
Use your thumb to disengage the safety button!
@petcatznzАй бұрын
He can’t remember what he paid for this? Must think his wife may watch the video at some point!
@contessa.adella Жыл бұрын
You did not reveal: The front of the sole plate has a guide notch….but it is 2mm out. If you follow a pencil line with it, your workpiece will be 2mm wider than expected. This is poor design for a professional level tool. Otherwise it is very good.
@KAPWoodworkandbuilding Жыл бұрын
This is something I’ve discovered as I’ve used it a lot. Needing to adjust
@steventhun18136 ай бұрын
The 2mm you talking about is the kerf of the blade it designed for!
@contessa.adellaАй бұрын
@@steventhun1813 no it’s not. Specifically the left edge of the kerf is 2 (and a bit) mm to the right of the edge of the alignment notch. Ok for rough framing..sure!
@steventhun1813Ай бұрын
@@contessa.adellaYou must know it better than a person working with it day in , day out! Bloody poser!