DEWALT DCW600B 20V Compact Router Review and Four Uncommon Bits that Take it to the Next Level
Рет қаралды 176,090
Күн бұрынI give the new dewalt 20v cordless router 5/5 stars. This video is a REVIEW (from an actual trim subcontractor) of the DEWALT DCW600B 20V Max XR Compact Router and my favorite relatively unknown four Whiteside router bits that take this great router to the next level.
Insider Carpentry Amazon Storefront with Favorite Tool Lists - www.amazon.com/shop/insider_c...
Dewalt 20v Compact Router - geni.us/nxsn8 (Amazon)
Dewalt 20v Router Plunge Base - geni.us/DKKK (Amazon)
1/16 Radius Pilot Bit by Whiteside - geni.us/ZmGpJ (Amazon)
5/32" Radius Round Over Bit by Whiteside - geni.us/w2aSHOo (Amazon)
1/4" Shank Spiral Combination Bit by Whiteside - geni.us/pUiS (Amazon)
1/2 Shank Spiral Combination 7/8" Diameter Bit by Whiteside - geni.us/PdPj (Amazon)
1/2 Shank Spiral Combination 1/2" Diameter Bit by Whiteside - geni.us/6a1hTx (Amazon)
Festool Lipping Planer Setup
Festool OF 1010 Router - geni.us/rBq6AW (Amazon)
Festool Angle Arm - geni.us/7YAvOx (Amazon)
Festool Edging Plate - geni.us/D45S (Amazon)
Festool Chip Deflector - geni.us/OAgOeR (Amazon)
Collins Plywood Prep Bit - www.collinstool.com/tools/ply...
INSTAGRAM - / insider_carpentry
TIP JAR - / insider_carpentry
@InsiderCarpentry 3 жыл бұрын
THANKS FOR SUPPORTING THIS CHANNEL BY VISITING THESE AMAZON AFFILIATE TOOL LINKS!!! Dewalt 20v Compact Router - geni.us/nxsn8 (Amazon) Dewalt 20v Router Plunge Base - geni.us/DKKK (Amazon) 1/16 Radius Pilot Bit by Whiteside - geni.us/ZmGpJ (Amazon) 5/32" Radius Round Over Bit by Whiteside - geni.us/w2aSHOo (Amazon) 1/4" Shank Spiral Combination Bit by Whiteside - geni.us/pUiS (Amazon) 1/2 Shank Spiral Combination 7/8" Diameter Bit by Whiteside - geni.us/PdPj (Amazon) 1/2 Shank Spiral Combination 1/2" Diameter Bit by Whiteside - geni.us/6a1hTx (Amazon) Festool Lipping Planer Setup Festool OF 1010 Router - geni.us/rBq6AW (Amazon) Festool Angle Arm - geni.us/7YAvOx (Amazon) Festool Edging Plate - geni.us/D45S (Amazon) Festool Chip Deflector - geni.us/OAgOeR (Amazon) Collins Plywood Prep Bit - www.collinstool.com/tools/ply-prep-router-bit/
@colsonlandry694 2 жыл бұрын
You all prolly dont care but does any of you know a way to log back into an instagram account?? I was dumb forgot my account password. I would love any assistance you can offer me!
@acederrick8146 2 жыл бұрын
@Colson Landry Instablaster ;)
@colsonlandry694 2 жыл бұрын
@Ace Derrick thanks for your reply. I found the site on google and Im in the hacking process atm. I see it takes a while so I will get back to you later when my account password hopefully is recovered.
@colsonlandry694 2 жыл бұрын
@Ace Derrick it worked and I finally got access to my account again. Im so happy! Thanks so much, you saved my account :D
@acederrick8146 2 жыл бұрын
@Colson Landry happy to help :)
@chriswitz3949 Жыл бұрын
It's crazy how much I learn from your video's...they are true gold and you should feel proud of what you're contributing to the craft
@jimmygthompson 5 жыл бұрын
Great review, practical and given with obvious experience. I especially like the reminder to not judge something for what it's not intended. Keep reviewing.
@Jddlincoln 5 жыл бұрын
Been using the Dewalt cordless router for a little over a month now, love it. It has been able to do everything I Have wanted it to do, and I loved being cordless.
@AC.Prince 5 жыл бұрын
Got to get me 1 of the cordless router not 5 just 1 is all I need. Great job on everything you do. Thanks
@texascraftsman7215 5 жыл бұрын
Love the compact routers I’ve had the dewalt electric compact since they came out but all my cordless tools are makita really like their compact cordless router and our router bits look similar can’t spent to much money on quality router bits nothing worse than building custom cabinets and running a flush trim bit and tearing up styles... thanks for sharing your collection looks like your set up for efficiency great job
@davidsherley2652 3 жыл бұрын
Hi Spencer - thank you for another excellent review. Your thought process really stands out. I like the way you’ve selected the profiles of the router bits - truly artisan. I’ll definitely try the 5/32” round over and combination up/down spiral. I also like your philosophy of dedicating the right tool for the job - balancing ease of operation with power to do the job right.
@dsdragoon 5 жыл бұрын
Thank you for the review of these routers and bits.
@MikeyDonna 3 жыл бұрын
Great review, I know your channel is directed toward other professionals but as a home owner who is constantly working on a “Honey Do” build or remodel list I really appreciate your detailed explanations . Time doesn’t enter into my projects but I work toward perfection on the smallest of them. You’re a great example in quality as well as production. As a side note I appreciate your cross emblem . I assume you are a son of the “ Greatest Carpenter” who ever lived on earth. Mike
@willproulx8951 5 жыл бұрын
thanks for this man. you are my go to person for bits and stuff that ive never heard of haha.
@carlmainwaring4349 5 жыл бұрын
Great descriptions of router bits. Thanks!
@markjarman7819 5 жыл бұрын
Fantastic little router. I love mine and worth going over to it. Can’t wait to see the flexvolt router that I’m sure dewalt will release
@abm2958 5 жыл бұрын
Excellent video, I just bought and used one of these routers today, what a game changer!
@benjamingerow5650 2 жыл бұрын
This is truly incredible knowledge! Another one saved to the playlist.
@Crooks103 4 жыл бұрын
Awesome, that is a professional approach, brilliant
@tseringdorjee3775 3 жыл бұрын
I really appreciate your work. Your every vlog inspire me.
@thecarpenterpros9822 4 жыл бұрын
I am getting ready to order some of those bits. I do a lot of built-in cabinets always looking to up my game. Thanks
@jasonbatista8590 5 жыл бұрын
Man I tell ya Spencer your videos are so informative and helpful! Don't stop educating us! I'm running a Bosch trim router (corded) looking into investing in a cordless just haven't made up my mind on which platform to go with. As a DeWalt fan and now this I think the decision is made! Also I appreciate the in depth looks at all the different bits that you've shown, didn't realize the vast difference in them all. Thank you and keep it up!!
@InsiderCarpentry 5 жыл бұрын
You bet. You won't be disappointed in the dewalt. I'm impressed with it.
@jasonkoontz4095 3 жыл бұрын
Great video. Just got the cordless dewalt in a Christmas deal. Deff gonna look into some of those bits. Just a camera tip if you go into your camera settings you will find focus settings. Set the focus to be center weighted so it will focus on whatever's in the center of the shot. So when your showing a bit up close it will automatically focus so long as you have it in yh center of the shot. Super useful for this kind of stuff. Keep the vids coming!
@christofix 5 жыл бұрын
This was very interesting. Thanks for this informative video
@KlausPedersen_gaffa 5 жыл бұрын
Great review and insights. Thanks for sharing.
@ronhau1542 10 ай бұрын
I’m going to start keeping an eye out for your videos, that was very informative.
@liberaltears1714 5 жыл бұрын
This man has 5, what a savage
@BenMarvin 5 жыл бұрын
I have 5 Grex 23ga pin guns. NBD.
@georgedavall9449 3 жыл бұрын
Thanks for this Spencer! Convinced me to add the DeWalt battery starter Kit with the router, into my Home Depot cart. Works out to 99.00 for the router, as a bare tool. I already have the starter kit from a previous deal, so will probably return the battery kit, as Home Depot separates them on the receipt. What am impressive set up! Those flush cutting spiral bits are really unusual and I will be checking those out. Thanks for the Video. A Happy New Year to you and yours! 👍👍👍😁✌🏻🇺🇸
@Conservator. 5 жыл бұрын
Very interesting bits and explanation. Subbed.
@Thorgal320 4 жыл бұрын
Really good review. Usually i don’t leave comments, maybe this is my first one in fact.
@chancebeasley6536 5 жыл бұрын
Another great video Spencer!
@enyaw1948 4 жыл бұрын
Good Video, covers a lot of info ! NICE SHOP!
@rickculpepper709 5 жыл бұрын
Just wondering were you got your knowledge . You are always spot on,down here in southeast Georgia we love you .
@InsiderCarpentry 5 жыл бұрын
Lots and lots of internet surfing for many years and rubbing shoulders with some of the best online, then taking that info to the jobsite and applying and refining for myself.
@vyaterminaciones 5 жыл бұрын
Nice video buddy!!! Thank you for teaching us!!!!!
@makingitright4503 3 жыл бұрын
I have several of these and am very happy with them. I added a custom base plate from Dave’s Signs.
@AJ-od7mv 5 жыл бұрын
Great honest review 👍
@geeros41 4 жыл бұрын
Great review mate, nice one.
@stevendemarcus1321 Жыл бұрын
Spencer, Have learned a great deal from you brother. From trimming my remodels and entire houses to building tons of cabinets/ built-ins. You are a master my friend. Question, please do a video of the plyprep bit including setup method as I’ve struggled to utilize it myself on the 1617. Or do you have any tips? Thanks so much.
@pronkstar 4 жыл бұрын
Holy moly this guy is my doppelganger. It's me with a different voice. Lol. Just thought everyone should know that.
@ssaragoza7406 4 жыл бұрын
Stayed with makita bc of tilt base. But loved intro statement of these being 1/4" trim router and purpose. Awesome festool, extra handle knob for horizontal handling. But I'd still use a 1/8 R.O. bit and light sand for that 5/32. Lol
@chriswebb810 5 жыл бұрын
Great review, great video
@ChuckDaubenspeck 3 жыл бұрын
Great review! And wow you REALLY push a router to it's limits!
@philwort1873 5 жыл бұрын
Great video, thank you very much. As a purely mobile onsite carpenter I would not have the space for more than one router and the thought never came to me. Very interested in the router bits, it is quite hard to find that quality variety of bits here in Australia. Keep the videos coming 😁👌👌👌
@chrissmith2921 5 жыл бұрын
I know. I wasn't aware of such a great selection of bits either.
@InsiderCarpentry 5 жыл бұрын
FYI ***This Router Is Not Brushless*** (I think I said it was brushless in the video) Who else is going to have a pile of corded routers collecting dust in their shop??? Cordless is here and its here to stay. Great job Dewalt on this tool. Keep the cordless tools coming. (I really want to see a cordless biscuit joiner come to the market next. After that I'll take a pin nailer.)
@shaunlowe5108 5 жыл бұрын
I think I've seen the cordless biscuit joiner.
@keemosabi05 5 жыл бұрын
I'll second the cordless pin nailer!
@DEisnor24 5 жыл бұрын
I just checked on Amazon and in the question-and-answer sections it says they are not brushless technology. Do you have actual brushless ones and where to get them
@InsiderCarpentry 5 жыл бұрын
You are correct. I realized after I had already rendered and in the process of uploading that I said brushless. I didn't feel like going through the whole process again to edit it. But honestly with my experience using the router I'm getting impressive run times as is.
@InsiderCarpentry 5 жыл бұрын
I'm holding out for dewalt. I don't own anything cordless from makita, so I don't want to go down the road of another battery platform.
@timbria3698 5 жыл бұрын
Cordless trim routers are huge especially for me and all the lock sets and mill work on site I have the makita with four separate bases. I can't wait for the day for a larger cordless router Thanks for your videos
@zackfishle1009 5 жыл бұрын
Flexvolt router? I bet Makita would build a badass large router. Start a petition.
@InsiderCarpentry 5 жыл бұрын
They have to be in the R&D phase. I can't wait for a larger cordless router to use with my jambmaster.
@johnasp9630 5 жыл бұрын
Just used my cordless Dewalt router today for the first time to route out door hardware on 2 doors. This tool is a dream...no cord...well balanced...multi speeds. Really enjoyed your video,great content.
@InsiderCarpentry 5 жыл бұрын
I was super impressed with the balance of the router with the plunge base. Feels great in the hands.
@rickyperkins232 7 ай бұрын
@@InsiderCarpentrynow that you have the DeWalt trim router for a while do you still recommend it? What do you think about the FLEX trim router, is it a DeWalt rebadged? Is there any Pros and Cons on the Milwaukee 1/2" since you got? Lastly what do you think about the Mafell router?
@ironmantooltime 4 жыл бұрын
Great review 👍
@willproulx8951 5 жыл бұрын
by the way you should try to take footage whenever you have a modification you're doing or a jig you're making for a tool. From what I've learned so far from a really great carpenter i work for is that there's quite a few tools that have so much more potential if the user understands how to get results they want from a homemade jig.
@zackfishle1009 5 жыл бұрын
Hmm. . . Should I trust this review? "I bought five of these." Sounds legit. Keep up the great work. I'd hire you.
@pajomaximus 5 жыл бұрын
If I had the money there I would buy 5. Pays to be quick . Not wasting time looking for bits and changing them. And I've seen his work. Its like a one man production line.....of top quality......so yeah I would say you could trust this review. 😀😀
@chrissmith2921 5 жыл бұрын
He did mention he bought them without seeing them first.
@zackfishle1009 5 жыл бұрын
True. . . He did buy five of them@@chrissmith2921
@brad4908 4 жыл бұрын
Michael Perez do you think maybe he meant how a customer hires a carpenter to build something? Dude.
@kennethlemke9826 4 жыл бұрын
Excellent info
@Intoxacajun 4 жыл бұрын
Thanx! Great Info!
@rdmclark Жыл бұрын
I love my 20v router, i mainly use it for door hinges
@ramaroodle 3 жыл бұрын
Nice job. Thanks.
@timg6518 3 жыл бұрын
Great video, can't wait to see more. By the way what type of a bit would you use for formica on a kitchen countertop.
@jonnymandoonthemove157 4 жыл бұрын
I found this very helpful. I have 7 DeWalt cordless screwdrivers with dedicated bits at work on my bench. Totally get multiple tools. Just ordered the router shown. Good bit info as I’m starting an endless cabinet project.
@dokmanian 5 жыл бұрын
i got 2 of those routers for door hinges and strike plates because i don't like to change bits great video
@chrissmith2921 5 жыл бұрын
What brand of jigs do you use?
@dokmanian 5 жыл бұрын
@@chrissmith2921 i use Trend and Porter Cable
@MichaelJordan-hn4zd 3 жыл бұрын
Thanks for the review.. I didn’t know the bits cost as much as the tool itself
@InsiderCarpentry 3 жыл бұрын
Yep, but when tear out will ruin an expensive work piece you need those expensive bits. They can be money well spent.
@carterscustomrods 2 жыл бұрын
Well, you can get decent bits for $20-$40 that do a good job, they're just don't last long. And where you might normally sharpen it a bit, doing it to an up/down/compression bit is just not an option. You can get very good bits for $50 up to $150... but a $200 cordless router isn't where I'm risking using those. Smaller routers will occasionally "jump" no matter how skilled you are. And with a ¼" shank, the bit is ruined. I had a good amount more jump with the Dewalt, and a compression style. I'm usually working with wood, occasionallyaluminum. The Dewalt did great on aluminum, but wood was a bit of a nightmare. I use the makita 18v coupled with the plunge base it's amazing. (And I admit that I've never tried the plunge base for the Dewalt, but it's had some harsh reviews.) But even then, I'm putting more costly bits into better routers. Oh Dewalt... was ELU all for nothing? Lol
@jameslund221 3 жыл бұрын
Dude doesn’t change bits, he just grabs a whole router. lol
@ryancduff 3 жыл бұрын
One tool I haven't added to my collection yet is a router, but I've been looking into it recently. This came up in my recommended feed and now I'm wondering if 1 router is enough. 😂
@InsiderCarpentry 3 жыл бұрын
Nope. Lol. Can’t have enough routers.
@acemany1126 3 жыл бұрын
That's the same shit I was thinking 😂. This guy is the router man!!!
@julianparsons4124 3 жыл бұрын
Cause he can Dude !!!
@nickpersenaire4443 5 ай бұрын
Because time is Money Spencer is the most efficient finish carpenter I know.
@BenMarvin 5 жыл бұрын
Good stuff. I have the corded version of the DeWalt compact router and over the years I find myself reaching for it more often than a full size router. Love the content on your channel, as a one man contractor, I'd love to see some business related content from you as well. Quoting/pricing, invoicing, finding jobs, contracts, or maybe just some funny or interesting jobsite stories.
@InsiderCarpentry 5 жыл бұрын
Thanks for the feedback. I'd definitely like to do more business related videos also.
@irishRocker1 Жыл бұрын
Moving to a new house and was hoping to set up a shed with some tools and for a router had been looking at the DW618 but its prob over kill for me. This looks very handy and hopefully cheaper
@williambutler3695 5 жыл бұрын
People underestimate the value of having multiple routers. I think when I counted, between full size routers, compact routers, and jigs, I think I have about 20 routers. I build things similar to you. I have a special lipping planer. Don’t remember who makes it but it was several hundred to a thousand dollars. Really good though. Great for big countertops and shelves. I used to just glue and nail a 1x2 front edge to my shelves and tops. Now though, I run a 3/4x1/2” rabbet (using a bearing guided router bit) in the 1x2. This makes it easier to apply the trim, and now I only have to flush trim a 1/4” of material. It also automatically makes it nearly flush. You just have to take off about 1/32” since plywood is slightly under 3/4”. I highly recommend it. I also you that joint on my live ends where an end panel meets the faceframe.
@loganpatterson4674 5 жыл бұрын
Thanks for sharing that, makes great sense
@112wade 5 жыл бұрын
Hoffman made (makes?) a good, but expensive, lipping planer.
@coachschenk 5 жыл бұрын
I always knew I was a hack but when I watch your videos I REALLY KNOW that I'm a true hack. Great video, keep them coming.
@shaunlowe5108 5 жыл бұрын
I feel the same way. Did you see the finished angled beams he put in by himself? Made them in the shop. Took them to the job. Bought a wench that hooked to his cordless dewalt drill. Got em in place marked them, cut them, then hung em by himself. Dude's got skills.
@coachschenk 5 жыл бұрын
@@shaunlowe5108 Not yet, I will have to check that out, apparently I need to be humbled even more.
@markaguirre4753 4 жыл бұрын
5 cordless routers, 3 girlfriends. My hero. Great video. Sold me on the router.
@danhale3259 5 жыл бұрын
Could you describe the custom fence set up for the Collins plywood bit? I would like to make one of those. How is your's different from the one shown on Collins web page?
@gnusndn6089 5 жыл бұрын
Yeah I like those compression bits they really do a good job. I'm old and retired now but my routers are all corded sorry for the lag in technology. Who would have guessed the direction Battery Technology has gone? Miter saws and table saws with battery?? Wow what a country!!
@InsiderCarpentry 5 жыл бұрын
It is crazy. And its only going to keep getting better. Another decade and we will probably only have cords on our battery chargers.
@Jddlincoln 5 жыл бұрын
I have gone almost completely cordless. If I am on a job for an extended period of time my corded miter and table saw come out. But if I am only on a short day or two job all my saws are cordless. Really cuts down on setup and clean up time, plus don’t have to worry about searching for enough electric to run my job.,
@anthonyd.5140 3 жыл бұрын
Great review ! I know you stated you haven’t experienced any change in adjustment as far as depth , I saw another reviewer saying when you grab it too high on the adjustment ring it can change depth?
@mariocarreiro6946 Жыл бұрын
Hey Spencer question: I also love the whiteside bits. Can you recommend what bits are a must have set for my 1/4 & 1/2 router setup?
@crownmoldingbyspectaculart941 5 жыл бұрын
Been waiting for the new brushless dewalt routers. I plan to use them dedicated for door installation (hinge mortising and latch plate mortising).
@InsiderCarpentry 5 жыл бұрын
They are worth the wait. I'm satisfied. Glad they got it right. FYI they aren't actually brushless.
@crownmoldingbyspectaculart941 5 жыл бұрын
Insider Carpentry damn, shouldn’t have watched this video. Those two Ryobi corded ones for doors I got a few months ago will need to find a place in my workshop and the dewalts will eventually find a place for on site work where cords are a pain.
@markgross3256 5 жыл бұрын
I need to get 1 so bad!
@joshuakemblebluegrass838 3 жыл бұрын
I got the router recently and I was amazed at the power, went through 1/2” OSB like nothing
@InsiderCarpentry 3 жыл бұрын
I didn't expect it to be as powerful as it is. Its impressive.
@joshuareed3999 3 жыл бұрын
If I had a tenth of your tool setup I could afford to burn every tool I own and could still make 6 times the money while only working 5 days a week part time. Thats a lot of math, but what it amounts to is..... I have tool envy! Your videos have been really helpful. Thank you!
@lionspirit98 5 жыл бұрын
Finish Carpentry TV brought me here 😁
@InsiderCarpentry 5 жыл бұрын
Good dude. Glad to have you. 👍
@abm2958 5 жыл бұрын
I as well, great channel!
@user-ox7bu4xr3j 6 ай бұрын
Great video! Where can I find the dust shroud you have on the Bosch router with ply prep bit. Currently using the bit in router table with power feeder but I like the versatility of a handheld router option. Thanks.
@InsiderCarpentry 6 ай бұрын
Honestly I can't remember where I got it from. It's been a long time since I made that setup.
@lgbfjbsupporter5566 5 жыл бұрын
Dewalt needs to make a right angle/lipping/edge banding base for this. It would be a perfect combo versatile and cordless and make a great mfk 700 killer.
@ginoasci2876 4 жыл бұрын
that collins ply-prep bit is interesting. does it leave points on the edge of the plywood or does it leave at least a 1/8” flat so you can put clamping pressure on it so the points don’t collapse? a five minute video wood bee great if you have the time. i find this bit interesting because i’ve never heard the glue moisture to pop the ply and cause that line you’re talking about. i’d love to know more. great video.
@InsiderCarpentry 4 жыл бұрын
It leaves a little bit flat. It has some adjustment as to how much. Depends on how you set it up. It really helps get invisible seems.
@ReX-jo6hb 4 жыл бұрын
Would you recommend it to round the edges (3 mm radius) of MDF understairs drawers without disassembling them? I think a corded 1/2 router could be too heavy to move against vertical boards.
@carpenterone3 5 жыл бұрын
You just need a SBE (Pakeplate)😜 As always, great video dude
@InsiderCarpentry 5 жыл бұрын
Haha. You're to busy as it is frank. Someday if I get ambitious maybe I'll try and make one myself and copy you. 👍
@jesseyates6725 5 жыл бұрын
Great video very informative, new subscriber, finish carpentry TV sent me!
@InsiderCarpentry 5 жыл бұрын
Good dude. Glad to have you.
@victorboyd9881 4 жыл бұрын
Jesse Yates Me too
@Biggsy37 3 жыл бұрын
Bought one today :-)
@iamlosthere 4 жыл бұрын
How this guy doesn't have more than 1 million subscribers is beyond me.
@InsiderCarpentry 4 жыл бұрын
KZfaq is a marathon. Gotta put in the time making valuable content. Definitely doesn't grow overnight. Thanks for the compliment though.
@iamlosthere 4 жыл бұрын
Insider Carpentry I wish I started carpentry when I was few years younger. Anyway all your videos have been informative and have taken your knowledge as my own. As you can tell I sort of have a man crush on you but seriously thanks for sharing your knowledge.
@waysaunut 4 жыл бұрын
I have the new cordless Milwaukee, and the Dewalt, I love both, Great routers, Thanks for the nice review. I was wondering what size your shop is, Mines 32x25, Yours seems so much bigger
@InsiderCarpentry 4 жыл бұрын
30x36. Its an attached garage to my house. I feel like I could utilize the space much better if I didn't have doors taking up all the space on two walls. But it works for now.
@waysaunut 4 жыл бұрын
@@InsiderCarpentry Looks like a great size, Wish I had just a little bit more, I have a panel saw and a panel router that takes up a lot of my wall space, Thanks for the info
@jamesmartin5277 4 жыл бұрын
Just bought one today. Great video. However I'd really liked to have seeen close ups on the actual pieces you routed as your verbal explanation didnt completely make sense (to me I stress!)
@Everythingisgoingtobealright 5 жыл бұрын
New subscriber, DFW Crown (Finish Carpentry TV) sent me.
@roostermcghee9506 5 жыл бұрын
Same
@ironmarlin8 4 жыл бұрын
Ditto. Had seen some Insider before hearing about him from Richard, but now it sinks in - especially since IC is a fellow Hoosier. Great review - insures I'm making the right cordless decision for compact routers.
@thomasmitchell8385 2 жыл бұрын
Brilliant
@B.A.Bassangler 4 ай бұрын
Yes LIMITATIONS, but still love it. I used a pattern bit to trim 3/4 mdf and was using 1 hand to hold the tool, and the other to hold the dust hose...NFG, either the cut got too heavy, or I went the wrong direction, either way the bit caught and climbed right out of my hand...over my head, and onto the floor. Definitely a 2 handed operation, getting the plunge base next!
@jaredwaters4633 3 жыл бұрын
I love mine.
@ryanwiehl4172 4 жыл бұрын
in your opinion, would this router with plunge base, be sufficient for making the ron paulk style bench top jig?
@peterkiernan1668 5 жыл бұрын
Great review,now the tool list just got longer.
@Happychappy555 5 жыл бұрын
Will the dewalt router out an aperture in 40mm worktop ? Will it work in multiple passes as in a butt and scribe joint with a worktop jig
@hubshooter 5 жыл бұрын
I picked one of these up a month or so ago and I'm glad I did. The run time is crazy on them. With that plywood prep bit, how deep of a cove does it make? It seems like there could be a risk of damaging the top veneers if you're clamping the hell out of nosing.
@InsiderCarpentry 5 жыл бұрын
Its not very deep at all. And you can adjust it if needed so you're not taking out maximum depth. I don't think you's have any issues.
@hubshooter 5 жыл бұрын
@@InsiderCarpentry that makes sense! Did I see a festool female cord in your other router?
@tattoobillstattooremoval8822 4 жыл бұрын
What would you recommend for use on melamine? I have the new compact dewalt.
@jesterraj 2 жыл бұрын
I have a ridgid 2401...from router...was looking at the 611 dewalt thou
@billjones8771 4 жыл бұрын
I see in your video you have 2 empty bases on the table, where can those be located? Looking to see if the cordless base would fit on the DWP611. Thanks
@InsiderCarpentry 4 жыл бұрын
The plunge bases can be easily switch out with the fixed bases.
@mu99ins 3 жыл бұрын
What router would you use to drill 3/4" holes for bench dogs and holdfasts?
@teacher5376 3 жыл бұрын
Smart's design. Smart's ideals. Useful
@crownmoldingbyspectaculart941 5 жыл бұрын
Hey Spencer just wondering where you are buying those white side combination bits. I want to try a half-inch one
@InsiderCarpentry 5 жыл бұрын
Crown Molding by Spectacular Trim Link is in the video notes to the bits. 👍
@BlueBloodCstm 4 жыл бұрын
Is the collins bit in the Bosch router a 1/4" shank? The 1/2" shank is out of stock but i feel like 1/4" would work fine for the amount of stock you're taking off. Also, where did you get the dust port? Thanks.
@InsiderCarpentry 4 жыл бұрын
yes, the 1/4 would work fine for the ply prep bit.
@yitc6102 3 жыл бұрын
How do you keep the clear plastic so clean
@tedolsen2187 4 жыл бұрын
What foam are you using for router bit storage?
@alienproductions9948 4 жыл бұрын
What kind of a case do you recommend for the compact cordless router for job site work? Thank you in advance
@InsiderCarpentry 4 жыл бұрын
I don't have a case for them per se. I throw the one I always use in with a jobsite kit that I have in a milwaukee packout.
@ThisTall 4 жыл бұрын
Somewhere at Dewalt is a guy trying to convince the brass to use his new 1 second bit swapping collet with the argument that nobody wants to buy 5 routers...
@shaunlowe5108 5 жыл бұрын
Dude the jigs and shit you come up with. Man
@letterphase Жыл бұрын
Can the DCW600 be used to cut out shapes out of plywood. I’m looking for a tool to cut out Christmas tree and reindeer shapes
@yermoffroad 4 жыл бұрын
I was going to give you shit about owning 5 routers but then I realized I run 4 grinders because I too hate changing bits/disks
Mason Woodshop
Рет қаралды 97 М.
Insider Carpentry - Spencer Lewis
Рет қаралды 1,3 МЛН
The WoodShed
Рет қаралды 26 М.
Insider Carpentry - Spencer Lewis
Рет қаралды 193 М.
Jenny from the Shop
Рет қаралды 3,4 М.