Dewalt DWO1DT995 Quick Feed Trimmer Head and Line (for .095 and .080 line): Amazon: amzn.to/3rMjR8z Also see: Echo 99944200907b New Genuine Speed Feed 400 Head fits All SRM Trimmers!: Amazon: amzn.to/2WFaBFn Playlist: Trimmers, Mowers and Blower Reviews by Sparky Channel: kzfaq.info/sun/PLSD43kAzjUIQ2up7c2aoqe82xoXPZiZy9
@mikemorgan5414 Жыл бұрын
Hey you just solved my problem after a half-hour of messing about! I came right here and boom! - you had me going in less than 5 minutes. Would never have worked that spooling action out for myself! Top marks, THANK YOU
@dec0r8or2 күн бұрын
Thanks so much! This saved me from buying a whole new cassette! You saved the day!
@ht8259 Жыл бұрын
Yours is the only video that worked for me!!! I had the head jammed (didn’t need a new one) & then figured out how to load it. THANK YOU!!! This trimmer has sat in my garage for years… till today. Gotta go work now. God bless
@SparkyChannel Жыл бұрын
Excellent!
@thomasjones53072 ай бұрын
Most helpful vid on the internet
@SparkyChannel2 ай бұрын
Thanks so much!
@peacefrog05214 жыл бұрын
Sparky sounds like Scotty Kilmer. 😀 @ 1:06 I expected him to go “Ungh!” when taking off the old head.
@SparkyChannel4 жыл бұрын
LOL!
@OFCbigduke6134 ай бұрын
You just saved my ass. Awesome video. I hope you are still posting. Be well.
@SparkyChannel3 ай бұрын
Great to hear. I'll have more videos later, thanks!
@shadowdog5003 жыл бұрын
If your line is coiled and won’t feed through completely because of deflection, put a coffee stirrer straw through the head and feed the line through that. Remove the straw once the head is threaded and store it with your supply of string.
@SparkyChannel3 жыл бұрын
Love it, thanks!
@bill875 Жыл бұрын
Genius! Just have to tape a few to the container that holds the trimmer line and you're golden!
@cozyhome3073 жыл бұрын
Took a big chunk out of my pinky finger but got it done! 😆 Thank you for the video!!
@SparkyChannel3 жыл бұрын
Ouch!
@gordonmacqueen86943 жыл бұрын
If you have a DeWalt string trimmer and don't love it, change to this head. It's easy and it's like a whole new trimmer. Love it!!
@SparkyChannel3 жыл бұрын
Excellent, thanks!
@Bernadettefull4 жыл бұрын
I have been struggling for weeks trying to figure it out and 3 men also couldn't figure it out.....THANK YOU!!!!!!!!!
@SparkyChannel4 жыл бұрын
LOL! No problem, thanks!
@dcbeerboy762 жыл бұрын
Thanks for this. This was a really easy fix for a really annoying issue. My head would never advance and the cap broke and barely stayed on. I'd have to take the cap off and pull both sides of the string about every 5 mins.
@SparkyChannel2 жыл бұрын
No problem, thanks!
@leonardsmith823 жыл бұрын
That tool is awesome and you're awesome for showing how to load it 😎👍
@SparkyChannel3 жыл бұрын
Thanks!
@pwrmovesa96864 жыл бұрын
Thank you. Took me less than 5 minutes to change it out. Very easy to understand.
@SparkyChannel4 жыл бұрын
Glad it helped! Thanks!
@sifuweber14784 ай бұрын
Well explained. Almost returned mine. Thanks for this!
@SparkyChannel4 ай бұрын
Glad it helped!
@mnbytestube4 жыл бұрын
Thank you for this video. I didn't read the manual but I did follow the instructions on another youtube video. That video showed taking the head apart and he actually threaded it on backward. (though the comments said to do it the other way) That is how I was doing it until I found this awesome video. It is sooooo much easier than taking the thing apart.
@SparkyChannel4 жыл бұрын
You can take it apart if there is a piece of string caught in the head or if you want to clean it. But 95% of the time just reload the string! Thanks!
@sergelauziere32804 жыл бұрын
Thank you , you give us all the tools to work with our dewalt trimmer.
@SparkyChannel4 жыл бұрын
Glad you like them!
@codymarestein6538Ай бұрын
Awesome video. You have a great voice for explaining things. God bless
@DaveCollette2 жыл бұрын
Thank you for the video. Switched to this head and it's a million times better.
@SparkyChannel2 жыл бұрын
Great to hear! I like it better myself.
@solbishopable2 жыл бұрын
I was just about to return this thing to the Home Depot until I looked at your video. Thank you. 🙂
@SparkyChannel2 жыл бұрын
Glad I could help!
@raydriver73002 жыл бұрын
Very helpful. Thanks from the UK 🌞
@SparkyChannel2 жыл бұрын
You are so welcome!
@kevinhiggins7040 Жыл бұрын
Great video Sparky - helped out a ton!!!!!!!!! Your videos are all awesome and your work is very appreciated.
@SparkyChannel Жыл бұрын
Great to hear, thanks!
@akaredcrossbow4 жыл бұрын
I’m about to string my Dewalt DCST920 20v MAX XR that I bought last year on Amazon and I just noticed it came with the head you installed. I went on Amazon to review my order and the head that was supposed to come with it is the one you originally took off yours. IDK it has worked fine for me for a year, will see how it preforms after I re-string it. 👍🏻👍🏻
@philipjohn41493 жыл бұрын
They did a volume 2 with a new head. Your will work not bad so long as you are carfull if edging. It tends to break off at the hole.
@Alan_Kress2 жыл бұрын
I am do the opposite swap. The quick load head isn't well designed. The two clips that secure the top cover to the spool housing break fairly easily. Thanks for the tutorial!
@jessicaweaver6728 Жыл бұрын
Great for a typical suburban lawn.
@SparkyChannel Жыл бұрын
Yes, I agree.
@Wardmediagroup3 жыл бұрын
Thank you. This video saved me much frustration.
@SparkyChannel3 жыл бұрын
Excellent!
@MrHadrian712 ай бұрын
Awesome, thanks Sparky! Good information and thanks for sharing!
@eugenew6717 Жыл бұрын
Ty for the video,,was told it wouldn't work with 925 model,,your video showed it does,,I bought and followed the video,,ty💥💥👍
@SparkyChannel Жыл бұрын
No problem, thanks!
@garydudgeon4 жыл бұрын
That is a slick way to respool line.
@SparkyChannel4 жыл бұрын
Yes, it's super fast. Thanks Gary!
@Mentaculus4211 ай бұрын
Just installed one, one note is that I had to find a screwdriver that was NOT TOO BIG, as you have to get it to fit into the third inner slot that might not allow a large WIDE screwdriver blade head to be accommodated.
@SparkyChannel11 ай бұрын
Excellent point. Thanks!
@peakproofuk5 ай бұрын
Awesome. Helpful re thread direction.
@SparkyChannel5 ай бұрын
Glad it was helpful!
@fredhughes88573 жыл бұрын
Thankyou from "Ends of the earth" Taumarunui NZ (65yrs)
@SparkyChannel6 ай бұрын
Cheers from San Diego!
@ApproachingDawnAD2 ай бұрын
Worked like a charm, Ty sir.
@DougVandegrift Жыл бұрын
Dewalt should just have this come on their trimmers. The one it comes with is so annoying. I almost took mine back to the store I was so frustrated lol
@SparkyChannel Жыл бұрын
I agree.
@Mentaculus4211 ай бұрын
It seems like the new ones do.
@TheMarkheasman4 жыл бұрын
brilliant video, thanks for showing it so clearly and without lots of "you tube waffle"!!
@SparkyChannel4 жыл бұрын
LOL! No YT waffle! Have a great 4th of July!!!
@jeffbetts67243 жыл бұрын
Awesome. Just ordered one. Thanks for the vid.
@SparkyChannel3 жыл бұрын
Hope you enjoy it! Thanks!
@ericjuarez79543 жыл бұрын
How much did it cost u?
@user-jk9rx7ur5w Жыл бұрын
Read everywhere else counter clockwise, this worked perfectly, thank you!
@SparkyChannel Жыл бұрын
No problem, thanks!
@Mentaculus4211 ай бұрын
It is only logical to have a left hand thread or else the head would loosen by itself.
@MarcellaSmithVegan Жыл бұрын
Thank you Sparky!!
@SparkyChannel Жыл бұрын
Very welcome!
@victorneckar77432 жыл бұрын
I’m definitely changing mine, thank you
@SparkyChannel2 жыл бұрын
No problem 👍
@geochi13 Жыл бұрын
Thank you! Saved me from aggravation! The instructions that came with this product are incomplete and horrible.
@victoroats7753 Жыл бұрын
Yes. They break fast. I've went through two of them in two years.
@Mentaculus4211 ай бұрын
LOL, mind didn’t have any instructions, just a little plastic bag with the head inside. Thanks Amazon!
@TheSHANEPRO3 жыл бұрын
Hi. I've bought this dewalt strimmer . Loaded the cutting wire as shown. Like in you video. Got a question.. how do you get additional wire out when it shortens ? Bump the head? Pull it out ? There was no instructions when I bought it to explain . Thanks
@SparkyChannel3 жыл бұрын
Bump the head.
@SonofCarrollaviruss4 жыл бұрын
Hey Sparky, how does that trimmer head dispense the line when out trimming? Do you tap it, or is there a trigger? Thanks.
@SparkyChannel4 жыл бұрын
You tap it. Thanks!
@SonofCarrollaviruss4 жыл бұрын
Sparky Channel ok thanks
@ralphgoldsborough43922 жыл бұрын
Thank You very simple instructions
@SparkyChannel2 жыл бұрын
You're welcome!
@reeanimationgaming10342 жыл бұрын
Thank god for this video.. I broke mine by turning it counter clockwise, which is usually what you do when you want to loosen something up.. So this make no sense to me. Anyways, thank you very much for the video 👌
@SparkyChannel2 жыл бұрын
Glad it helped!
@Mentaculus4211 ай бұрын
Just look at the trimmer’s normal working rotation, if it was like “normal” the head would loosen up by itself!
@mernebaxa97019 ай бұрын
Thank you for this video !!! Such a great help !!!!
@SparkyChannel9 ай бұрын
You are so welcome!
@philipjohn41493 жыл бұрын
I have this head In the new 60v multi head. It's like the string lasts forever now. Compared to my 20v gen 1 vol 1.
@SparkyChannel3 жыл бұрын
Excellent!
@BigBodyPresence3 жыл бұрын
Same just upgraded as well, 60v is much better
@Mentaculus4211 ай бұрын
@@BigBodyPresence Yes it is day and night for cutting power.
@scottadams11193 жыл бұрын
Great and informative job. Thanks very much!
@SparkyChannel3 жыл бұрын
No problem, thanks!
@lovecrystalmagic2 жыл бұрын
Thank you!! This was super helpful👏👏
@SparkyChannel2 жыл бұрын
My pleasure!
@kenfeeler46763 жыл бұрын
Great video. Really learned a lot.
@SparkyChannel3 жыл бұрын
Glad to hear it! Thanks Ken!
@deanclarke28813 жыл бұрын
Brilliant Thanks for the Video. Saved me alot of time
@SparkyChannel3 жыл бұрын
Excellent!
@cascadianone11 ай бұрын
Great video, very helpful, thank you!
@SparkyChannel11 ай бұрын
You're very welcome!
@simonpollitt44102 жыл бұрын
Sparky, when you are loading the string I can’t tell which way you are ratcheting it, you do it toooo fast. I can ratchet it either way. Can you tell me if you are winding clockwise or counterclockwise
@kellyfirebaugh249411 ай бұрын
Did you figure this out?
@sohilronagh2863 жыл бұрын
thank you for the tutorial and help!
@SparkyChannel3 жыл бұрын
You're welcome!
@michaeldover8219Ай бұрын
I am missing those parts at 1:23. The nut parts. Do you know where I can buy that?
@danjohnston42902 ай бұрын
How to remove the quick load spool head
@SoleEpiphany3 жыл бұрын
Awesome content, I just ordered the flexvolt trimmer(DCST972X1). Having trouble getting the edger and blower attachments though. How do you find the dewalt line? Do you have a preference in brand or style line?
@SparkyChannel3 жыл бұрын
I love the Flexvolt trimmer but prefer the EGO blower.
@Mentaculus4211 ай бұрын
You have to be specific about WHICH Dewalt blower, some are barely adequate, the 60 v I have is great, but you better have a $1000 worth of 60 v batteries if you have a big job as it takes a lot of power.
@jamesfair97512 жыл бұрын
Is there one that works with the dewalt 925 the older 20v 13 inch trimmer ?
@zhinargallegos9566 Жыл бұрын
X2
@chrisruhnke57343 жыл бұрын
Your video was helpful. Thank you
@SparkyChannel3 жыл бұрын
My pleasure, thanks!
@anthonymacneil22794 жыл бұрын
Great video, but holy moly that head is pricey $145 on Amazon Canada. This is the only place its available I checked everywhere. Its $27 at Home Depot in US site but they don't ship to Canada
@SparkyChannel4 жыл бұрын
Good grief, that's expensive!
@tompringle30723 жыл бұрын
@@SparkyChannel just paid $20 for one at a tool shop near London Ontario.
@sinnedam Жыл бұрын
Do you still bump it on ground to feed?
@SparkyChannel Жыл бұрын
Yes.
@dtnjnq3 жыл бұрын
Hi. What size speed feed head is suitable fir the Dewalt 60v trimmer?
@daleedwards50282 жыл бұрын
Great video! Thank you.
@SparkyChannel2 жыл бұрын
No problem, thanks!
@joevaldivia67333 ай бұрын
Thanks, your introductions were helpful 👍🏽
@Resist42 жыл бұрын
Does anyone know if DeWalt sells just the cap for this head? I hate to have to keep spending around $30 to replace the whole spool head when all I need is the cap. That's the part that gets beat up.
@558vulcanxh Жыл бұрын
Hello, I don't like bumping the head to feed the line, it leaves marks on the lawn too so I've found, same as my 128ld Husqvarna, is to squeeze the cap with one or two thumbs and pull the required line through with my folded finger, same other side .Works a treat and dead easy .Good luck Folks 😊
@Resist4 Жыл бұрын
@@558vulcanxh It's called bump feed for a reason. Having to turn it off and flip it around just to squeeze the cap to feed out line wastes too much time. I'll keep bump feeding it, thank you.
@Justiceair Жыл бұрын
I have had to replace three head caps because they disintegrate after just a couple of hits on the ground. DeWalt doesn’t sell just the cap I’ve had to purchase the whole assembly which cost $45.00 each time. I only need the cap. Where can I meet just the cap.
@SparkyChannel Жыл бұрын
I'm not sure. You might call DeWalt on that one.
@robalan573 жыл бұрын
What do you like about the 0.095 line instead of 0.080 line?
@SparkyChannel3 жыл бұрын
It lasts longer because it doesn't break as easily.
@Selkian10 ай бұрын
If the line disappears inside, how do you get it out again? I have a new trimmer and cannot get the head off to fit the guard?
@SparkyChannel3 ай бұрын
Here you go: DeWalt Quickload™ Stuck String Fix for DeWalt String Trimmers: kzfaq.info/get/bejne/hNqme6-gyMXDYmg.html
@Jdawg1117553 жыл бұрын
For some reason the holes do not line up with the arrows, any tips on that, scared to for it and break something?
@SparkyChannel3 жыл бұрын
Yes, sight through the holes until you see daylight, then put the string through.
@MatthewFant3 жыл бұрын
Here’s a fun question. Are these supposed to have electric brakes? Mine doesn’t. Didn’t know if that was by design, or a defect.
@SparkyChannel3 жыл бұрын
No electric brake on this trimmer.
@tammylucas6185 Жыл бұрын
What's wrong when it just feeds all the line thur immediately as your operating it
@RobPendley Жыл бұрын
I had the same problem, took me over a year to figure out the the washer that goes over the bolt, last thing before the trimmer head goes on, was upside down. The smooth side should not be visible when you install the washer.
@richardvacanti9428 Жыл бұрын
Really get a ego way better
@_-nexus-_62572 жыл бұрын
How can I release the string in the weed eater? We own a gas powered one that you slam against the ground to get more line to release. However, with our Dewalt it has alot of line on it but it won't let anymore out.
@SparkyChannel2 жыл бұрын
It sounds like you have some tangled line in the head. If so, pull most of it out and reload the line.
@bradleykornele4 жыл бұрын
Would you have link for dewalt quick feed head replacement cap so don't have to pay for whole new replacement every time
@SparkyChannel4 жыл бұрын
Hi Bradley! No, you have to buy the whole Quickload trimmer head.
@briancook30814 ай бұрын
read the manual people. The lines rub off, thats what markers are for!!!
@SparkyChannel3 ай бұрын
Yep!
@IMOO18962 жыл бұрын
Many thanks!
@SparkyChannel2 жыл бұрын
You're welcome!
@jamesgroce31253 жыл бұрын
I have the 40 V DeWalt trimmer (****940, IIRC) and bought this head without realizing it doesn't list the 940 as one of the ones it can be mounted on. I haven't opened the blister pack yet. Will it fit my 940 trimmer? Anyone?
@annacraft Жыл бұрын
Ok, did not know that these fit on the 60V trimmer. Guess I will get it as the one it comes with is extremely annoying. 🙋🏻♀️
@SparkyChannel Жыл бұрын
Sounds good! Also, check out this video: Are DeWalt Quickload™ and ECHO Speedfeed™ Trimmer Heads Interchangable?: kzfaq.info/get/bejne/fMqigrmJ2aycqI0.html
@tonibrown9362 Жыл бұрын
Thank you!
@SparkyChannel Жыл бұрын
You're welcome!
@akaredcrossbow4 жыл бұрын
Just looked on Amazon and it’s currently unavailable. I’m wondering if it’s been discontinued?
@SparkyChannel3 жыл бұрын
Here you go: Dewalt DWO1DT995 Quick Feed Trimmer Head and Line amzn.to/3rMjR8z
@myoneblackfriend31519 ай бұрын
Thank you.
@SparkyChannel9 ай бұрын
Welcome!
@sylvainmerlin69118 ай бұрын
Thanks
@SparkyChannel4 ай бұрын
No problem, thanks!
@dougsweldingfabrication953 Жыл бұрын
Thank you
@SparkyChannel Жыл бұрын
Welcome!
@khanos73 Жыл бұрын
Very helpful video
@SparkyChannel Жыл бұрын
Glad to hear that!
@JamesZ1025 Жыл бұрын
Will the 60 volt trimmer operate on a 20 volt battery?
@SparkyChannel Жыл бұрын
If it says "Flex Volt" it will. Otherwise, no.
@annacraft Жыл бұрын
No, it will not. You can use the Flexvolt 60V batteries in 20V tools but of course not vice versa. 🙋🏻♀️
@Mentaculus4211 ай бұрын
Absolutely not, that is the combination that does not work! Most 20v tools/devices will work on the 60v batteries except for some exceptions usually due to size constraints. Some newer 20 volt tool might sense if a 60 volt battery is installed and are marketed and sold with a 60 volt battery (sometimes). Just checked and the 20 v battery is not “keyed” to fit into the 60 v trimmer!
@hvyduty1220 Жыл бұрын
Like and easy to do.........very good video
@SparkyChannel Жыл бұрын
Thank you! Cheers!
@retix112 жыл бұрын
Does this work for the 20v?
@SparkyChannel2 жыл бұрын
Yes, if it's a Quickload head.
@kevinbradley66993 ай бұрын
It helped
@SparkyChannel3 ай бұрын
Great to hear!
@rashiden2 жыл бұрын
Can anybody tell why strings goes inside after i trim the grass for 3 or 4 minutes? Help will be appreciated. Thank you
@SparkyChannel2 жыл бұрын
Bump the head to keep the string coming out every couple of minutes or so.
@ericheffler4972 жыл бұрын
@@SparkyChannel but what do you do if the string went inside of both eyelets. Nothing's outside. Happened suddenly.
@ZAPATTUBE2 жыл бұрын
@@ericheffler497 That will happen if you hit something hard like Concrete Block, or a Metal Fence, that cuts thru the like and rips it off inside the holes. Always keep feeding line & don't hit hard things, designed for soft GRASS.
@Mentaculus4211 ай бұрын
Also it should be noted that line gets BRITTLE as it ages, have heard it drys out. I have noticed this happening.
@pescaunica6204 Жыл бұрын
Good help 👍😃👌
@SparkyChannel Жыл бұрын
Thanks!
@OTG17762 жыл бұрын
Anyone else having a problem with the feed of the string?
@krehbein2 жыл бұрын
I am, just got the Dewalt trimmer and the string doesn’t come out when bumping it while spinning. When I take the cover off the string is tightened up and not free to let out. Reloaded it and same problem.
@OTG17762 жыл бұрын
@@krehbein I believe it’s a manufacturer issue I swapped it out at the Home Depot and haven’t had the same problem.
@mrbigtank064 жыл бұрын
How long of line can you feed it
@SparkyChannel4 жыл бұрын
20' Max.
@peacefrog05214 жыл бұрын
Oscar Rosales that’s a rather personal question, isn’t it? 😄
@mrbigtank064 жыл бұрын
@@peacefrog0521 🤣🤣🤣🤣
@Thomas-fj8olАй бұрын
thanks Sparky!
@ronniemartin83913 ай бұрын
Where to purchase this head?
@claudiamiller77302 ай бұрын
Got mine at Ace….$40 (yikes!) but had a 25% off coupon, so……yeah!💕
@goneviral88142 жыл бұрын
How can I put simple slim head, I hate the DeWalt automatic loading head it's too big and doesn't feel right, anybody??????
@SparkyChannel2 жыл бұрын
Check out my video: Are DeWalt Quickload™ and ECHO Speedfeed™ Trimmer Heads Interchangable?: kzfaq.info/get/bejne/fMqigrmJ2aycqI0.html
@richardlowe80623 жыл бұрын
Excellent video thanks.
@SparkyChannel3 жыл бұрын
Glad it was helpful!
@scottwilkins3 жыл бұрын
The dewalt instructions are terrible, thanks for the informative video.
@SparkyChannel3 жыл бұрын
Glad it was helpful! Thanks Scott!
@LouHemi4 жыл бұрын
My dewalt quickload trimmer head is stuck like how do you loosen the string or how to adjust the string
@chriskoch98294 жыл бұрын
holden killa you have something built up under it. Take it off and clean under it. I just had the same problem.
@LouHemi4 жыл бұрын
Chris Koch I already clean under it and check the all the head it’s already clean idk why. I think I just need to change this head
@MrIrishalley4 жыл бұрын
when you say "cleaned" did you remove the head or just get what you could see? if you didnt remove the head there can/will be grass all wrapped around the shaft between the head and the "spacer" for lack of a better term. this will prevent the head from depressing. like in his video, you need to put a screw driver in the guards hole and the locking hole on the shaft. then turn the head clockwise. once its off the spacer and head will separate and you can remove the grass. this is the only way to remove the grass. and as far as i know you cant take the head apart like you would a typical weed wacker
@bird71811 ай бұрын
to bad that don't work with my dewalt 925..
@LCCJ824 жыл бұрын
I just replace my Dewalt with an Echo speed Feed 400. This video helped me. Thanks @sparkychannel