DEWALT TOOL ACCESSORY THAT 99% OF PEOPLE DON'T KNOW EXISTS!

Рет қаралды 2,706,481

5 жыл бұрын

DEWALT TOOL ACCESSORY THAT 99% OF PEOPLE DON'T KNOW EXISTS!
Did you know about this DeWALT tool accessory attachment? Well if not, you are a part of the 99% of people that don't know this accessory exists! Now I want to welcome you to the 1% that know about this DeWALT tool attachment! If you already knew what this accessory was for comment down below, if you learned something new leave a comment below! Let us know your thoughts!

Пікірлер: 1 500

@mdsd77 5 жыл бұрын

Gonna need a Bat Belt for all these attachments now - after all the Bat Belt is black and yellow

@VCGConstruction 5 жыл бұрын

🤣🤣 good point!!

@timwilliams1854 4 жыл бұрын

Where is the attachment you use on you're filthy wife?

@JR-zu9hl 4 жыл бұрын

Thought you were gonna loose a digit with that thing

@paedahe4975 3 жыл бұрын

@@JR-zu9hl That’s shear madness. Cut it out. lol

@brendanwood1540 3 жыл бұрын

Inspector Gadget over here....

@InspiredAutosport 4 жыл бұрын

How many of you flinched when he got near his fingers with the cutter?!

@Pofomoco 4 жыл бұрын

holy fook thats insane

@randysermon9777 4 жыл бұрын

thought one was gone for sure

@rgi1998 4 жыл бұрын

I had to move on to another video at that point. Not everyone can watch a train wreck.

@lablount2910 4 жыл бұрын

Thought this dude was legit until that moment

@tylerjohnson2173 4 жыл бұрын

INSPIRED AUTOSPORT i literally just looked threw to find if someone else saw that lol

@larryrivers2752 3 жыл бұрын

Finally something I can use to open the blow mold pack the tool came in!

@jameshendricks8526 3 жыл бұрын

That is great

@newjargon1697 3 жыл бұрын

Yeah good point.

@alexg3176 3 жыл бұрын

Hahaha

@canucanoe2861 3 жыл бұрын

Are you sure it will work? Those suckers are tough!

@17Scumdog 3 жыл бұрын

I was opening a pack of sawzall blades the other day and I sliced my hand open... On the plastic packaging.

@SuperUncleRyan 3 жыл бұрын

I have this and absolutely love it for cutting FRP. Straight and fast. I used to use double cuts but these shears work much faster. I just leave it on an old impact permanently. Definitely worth the money.

@timhobbs1229 3 жыл бұрын

How did you find out about it. A supply house, or fellow worker.

@Atum_Ra 3 жыл бұрын

Man, I used to do custom aluminum gutters, siding & flashing for about 6 years and this would have been an essential accessory to have. Companies are really coming out with some innovative tools and accessories just in the last few years, I would have used this daily.

@TheFlatlander440 5 жыл бұрын

Wow Vince, I never knew that attachment existed. Now I can use my old DeWalt DC826 to cut some sheet metal and replace my Ingersol Rand pneumatic metal shear with it. Thanks for enlightening us with this new DeWalt attachment. You just sold me on this. Cheers!

@Sheetmetalsupreme 5 жыл бұрын

I'm sold! A DEWALT shear?! Thanks for this video!

@duddymeister1215 5 жыл бұрын

Does anyone else think this guy is like the handyman version of unbox therapy, like the way he talks

@mikemetz82 4 жыл бұрын

Lol both Jersey?

@BPMoments 4 жыл бұрын

Unbox is from Toronto...

@kelly00000111111 4 жыл бұрын

I think this channel’s videos are a lot less shill filled vids.

@davidsgarage44 3 жыл бұрын

Great comparison

@chadlogansdad 3 жыл бұрын

He's hard to listen to

@HyperactiveNeuron 5 жыл бұрын

I've been aware of this and similar attachments I've seen in stores and have always been curious about their use. Thanks for showing us. Looks pretty useful.

@littlemilto6563 5 жыл бұрын

Thanks for the heads up, this video has been a great help and it's helped out someone else who does suffer from arthritis.

@duncdunc76 5 жыл бұрын

I've seen this at lowes and always wondered if it would work well. Thanks so much for testing it out for us Vince! VCG Rocks! I often have to deal with trimming metal roofing for gazebos and this is the ticket!

@Roblecop 5 жыл бұрын

I just showed this to a coworker who does stock car racing in his freetime. Hes so happy to not have to sheer panels by hand anymore. Love the video Vince!

@VCGConstruction 5 жыл бұрын

Thank you Joshua!!

@paulsim7589 3 жыл бұрын

Yea, that's cool. Do I need it - No.... am I thinking of getting it? - Yes :)

@t4rbrah899 3 жыл бұрын

Same! You don't need it until you do!

@NicRidic 3 жыл бұрын

Buy malcos model. 10xs better

@WHITETRASHWILL 3 жыл бұрын

I just bought one on Amazon 45$

@1.8millionvolts87 3 жыл бұрын

@@WHITETRASHWILL holy shit, expensive

@ziggy5347 2 жыл бұрын

@@1.8millionvolts87 there 60 plus tax at lowes an depo

@Superdan187211 5 жыл бұрын

I love these things. When I was management for commercial construction company I bought as many as I could find. They were discontinued for a couple years. They're way cheaper than designated power shears. I really only use mine anymore for FRP. They are absolutely worth the $55. I found one more pair for sale during the time they were discontinued. I was so excited I bought them out of pocket and kept them for myself.

@iamnegan1515 3 жыл бұрын

Its a wonder he got all his fingers.

@PatTheRiot 2 жыл бұрын

FR after 2 cringe in the same video I had to stop watching. Did you spot the grabbing the tip with 1 hand while the other is on the trigger, battery in, ? lol

@chrischoat9099 5 жыл бұрын

Very useful tool, saved me a lot of time on a roofing job. Used mine on the dewalt 20v driver.

@pennywisetheclown9090 5 жыл бұрын

That would work just dandy in autobody repair, when you are doing door skins and qaurter splices 😊$60 you say roughly.

@jimk5307 4 жыл бұрын

$43 online. Such a deal!

@austinpatrick2682 5 жыл бұрын

4:47 Yikes! You just introduced DeWalt's latest, 20v Max Finger Nail Clippers.

@pags5zonda623 5 жыл бұрын

Came just to make this comment

@bluemantom77 5 жыл бұрын

You can also buy a dedicated DeWalt shears I use to have the 14.4v version years ago what a time saver that was and fatigue I got carpal tunnel from work my boss has one I might get one of maybe he can get me one on business discounts course I'll have to pay for it but he saves up to $15 if he buys tools in bulk maybe his next order I'll ask him if he could throw it in there explain that it will make my job more productive and I will not need to borrow his I do have had snips

@shareddaros9533 5 жыл бұрын

my toes curled up when i saw it OMG!

@palehorse24681 5 жыл бұрын

Any tool that makes you more productive is a good tool. This thing will let you make adjustments on the spot if you have a dumbass making cuts for you. Just saying lol

@msiftw1 5 жыл бұрын

scrolled down to see if anyone else noticed lol

@ChubbyFunster7 5 жыл бұрын

I’ve been using this tool for about a year now and I must say that if you are in the HVAC industry it is a must have

@castarmax1970 5 жыл бұрын

No way. 99% of people don't know it exist and too many people have already posted they own one :)

@ryanspringer2579 4 жыл бұрын

I’m a metal roofing contractor and the attachment is a must for clean cuts, especially valley end cuts that are visible to the public. Haven’t used the new Dewalt attachment but look forward to trying one out

@ljaysperspective1775 5 жыл бұрын

You Won me over with this attachment! Thx for sharing!

@zee3381 5 жыл бұрын

Vince your videos are great at showing us the newest tool accessories that are "Cutting" Edge Technology..! 👊

@bluemantom77 5 жыл бұрын

This attachments been out for a while it's true there's another Brand cost twice as much then this I never owed but seen videos of instead of clamping on the bottom of the battery it goes in the back of the tool like a drill of impact driver dewat version is really simple

@amoscardoza5253 5 жыл бұрын

I had no idea this even existed! Once again, this is why I luv VCG! Thank you brother!

@VCGConstruction 5 жыл бұрын

Thank you famous Amos!!

@270raptor 3 жыл бұрын

I’m a sheet metal mechanic and this is a must have !!! Love it

@RadThad89 3 жыл бұрын

You were correct. I did not know this attachment existed. Thanks!

@rickyfink9891 5 жыл бұрын

I've had that attachment for quite a longtime. I feel silly that I didn't think to use it on my current remodelling project, when I had to shorten an air return in the basement

@joshurmetal420 5 жыл бұрын

I have that for back up incase my Malco craps out. I use it metal roofs and shingles. Nice video!🤙

@Piolin768 4 жыл бұрын

I love when you make these deals of the week videos! Keep it up, Vince!!

@whiskybar 2 жыл бұрын

Bought a cutter from the competition and let me be clear, you need this one. I needed to cut wire fence many times and was slaving away for four hours with just metal shears. Got this beauty and it is a game changer!

@isaacinmon4086 5 жыл бұрын

I havnt seen the dewalt one but saw a friend had a old model and i thought it was awsome.

@shanecateriny4359 4 жыл бұрын

I have a brushless pair of snips that work perfect every time and no batt.

@automatic12ga4 4 жыл бұрын

Good way to get tendonitis.

@el_cucuy8528 Жыл бұрын

awesome tool been using for awhile in hvac commercial applications

@BinleyClan 2 жыл бұрын

I bought this shear attachment to break down old metal roofing. It easily sliced through everything. I will say that it's got a learner's curve for how to manipulate the longer metal pieces and the tool itself, to keep the cut going continuously. For the price and the time saved it was definitely worth it for me. Smart thinking by DeWalt. This will save you a headache and your hands will thank you.

@BluetoothBlades 5 жыл бұрын

Yo! Vince ! I got one of those last year... AND ITS STILL IN THE PACKAGE!!! Cant wait till I use it lol!

@castarmax1970 5 жыл бұрын

No way. 99% of people don't know it exist and too many people have already posted they own one :)

@ryanlefever6796 4 жыл бұрын

It works great. I bought mine back in 2018 when working with sheet metal.

@Redfour5 3 жыл бұрын

Sheet metal is one of those things me as a homeowner only works on every few years when I see something where it might work as a fix or on a roof. Then I go hunt down the hand shears and usually end up slicing my hand somehow in some way and try to remember the last time I had a tetanus shot and then find out my idea didn't work anyway in terms of a sheet metal fix... So, if this ONLY makes it so I don't have to hunt down those old manual shears AND reduces the odds of me cutting my hand/finger every few years, then I'm good to go for 43 bucks. You may feel the same...when you finally bust it open... AND HEY, you get to use a power tool in a new way. Doesn't get much better than that.

@miriamblack1285 3 жыл бұрын

Hi there , I got one question about dewalt dcb500 110v adaptor for flexvolt mitre saw , the question is that can it be used on other flexvolt tools ?

@Redfour5 3 жыл бұрын

@@miriamblack1285 That appears to be and adapter used with the dual energy source (battery or wallpower) flexvolt Miter saw. Apparently it is available in both US and European variants. There are no plugs...yet...on other FlexVolt tools per my understanding...

@markonurmi5479 5 жыл бұрын

That Cerwin Vega! caught my eye...

@cygnus1965 3 жыл бұрын

I’ve had Malco turbo shears for a few years now and I love em. Don’t use them everyday but they are in my handyman box and still work great.

@dimide5180 4 жыл бұрын

That DeWalt impact driver pivot brace!!! That's exactly what I've been looking for. Thanks for the video!

@blayneerwin9276 5 жыл бұрын

I seen one of them the other day and I thought it was the coolest thing I was on the job with my old man and we both were like amazed the amish were using it

@chrisprice2200 3 жыл бұрын

Weird. I have two metal stud garages to build this summer. Talked a lot about them today. Came home, to find this at the top of my KZfaq feed. 5 minutes in, I’m on Amazon, and ordered this.

@Jay-mundo 3 жыл бұрын

Did you have your phone on you when you were talking about it? Bit worrying

@27management 4 жыл бұрын

OMG!! So buying this. Thanks for showing this. Love this attachment. Plus everything I own is dewalt

@VCGConstruction 4 жыл бұрын

Nice Keith!!

@mattallen1660 4 жыл бұрын

Glad I can go back and watch these older ones while waiting for the next new one😀

@yogibeer9319 5 жыл бұрын

I was having a real depressing morning until I saw you say “DWASHRIR” 🤣🤣 You cracked me up! Thanks for a great channel!

@VCGConstruction 5 жыл бұрын

Yo cuz glad the video helped, always remember you’re not the average beer!

@unholydane8990 5 жыл бұрын

Grinder wheel does work, but dang does this tool work wonders!! Turns a metal roofing job into a quick and easier job

@dh66 4 жыл бұрын

Standard air shears are faster and more durable, plus you can sharpen the blades, better tool for that

@wohldog7502 3 жыл бұрын

I was going to be hanging some pro rib steel. Do you think this would work good on that?

@lyndonmoore6286 3 жыл бұрын

@@dh66 they both have their pros and cons, but this thing was a life saver when I was installing all the metal roofing and wall sheeting on a three story shop. I could cut pieces to size while I was in the scissor lift, and not have to worry about air lines or anything.

@chadharter1003 3 жыл бұрын

They are extremely useful for metal roofs. Before the attachment I used an air powered pair that does the same thing.

@coralillomx1867 3 жыл бұрын

Gracias compadre por hasermas facil el trabajo.

@jdreynolds29 5 жыл бұрын

Thanks for the video Vince. I don't have that DeWalt attachment however I do have two different Malco drill attachments when is the Malco ts1 the other is the Malco tscm. The ts1 is Turbo shear first edition this is for your run-of-the-mill sheet metal and the tscm is Turbo Shear corrugated metal. Both are top-notch high quality tools. I have been running both of them for years ,and when I say years yeah I'm talking since I first started air conditioning back in 1999 is when I first got the ts1.. I got the tscm some years later. I highly recommend both malco products. although just the ts1 by itself is highly versatile and can also do the corrugated metal , just not as effectively meaning it is little more difficult than the dedicated tool but for Sheet Metal work it is top-notch. Malco makes a version of the ts1 that is very similar almost identical to that DeWalt that you have. I don't know the model because I don't have it but I've seen it and I have used it and to tell you the truth I don't like it as much as the ts1. I find it somewhat limiting in usefulness and efficiency because of the fact that it does not swivel independently of the drill or impact that is attached to.

@akai69cam 5 жыл бұрын

Noice an toit. Toiten as needed.

@Jserafin914 5 жыл бұрын

Akai nunyabiznes lmfao

@jasonphillips3865 5 жыл бұрын

Tiot as a tiger 😂😂

@chrishorst6993 5 жыл бұрын

I though of the Austin Powers Bad Guy “Goldmember”

@bassSupply 4 жыл бұрын

No shmelting accident here, and it IS tout, toit like a toiler, SCOTTY Lol

@austindill7879 3 жыл бұрын

@@jasonphillips3865 toigah**

@BLohr707 4 жыл бұрын

Thank you for the video! Especially the breakdown for what drills it will work with. There is a bunch of mixed reviews on Amazon. Needing to customize your drill for it to fit

@MattersNot 3 жыл бұрын

Awesome video and attachment gotta get one thanks!

@Laddwagner 5 жыл бұрын

I've had one for a few months. Didn't realize how often I'd use it. Accidently found out it will cut two sheets of tin roofing at a time.

@johnwellings3225 5 жыл бұрын

Vince enjoyed the video and the attachment I would use, thanks

@saxmafia 3 жыл бұрын

Bought mine to cut wire mesh. Cheap, and works perfect.

@artaguilar7338 4 жыл бұрын

Did not know about this tool!! Pretty cool. Thanks for the presentation!!

@shadowbanned5164 5 жыл бұрын

Thanks for the video heading over to Amazon to grab one right now lol.

@shenandoahcyclist4955 4 жыл бұрын

I work in HVAC and cut ductwork everyday. I have about 3 different versions from different brands with my favorite being from malco. Has a separate handle for you to hold on to so you can guide it better, get more leverage and most importantly can twist the drill around while keeping the cutters in the same orientation to get into tight places. That dewalt version looks to me like its more for occasional or just straight cuts due it design. Seems great for the small cuts you did but anything more and I would get one with a handle.

@FlSHDlCKS 2 жыл бұрын

What's the product name of the one off Malco

@zicck710 2 жыл бұрын

@@FlSHDlCKS malco ts1ls turbo shears, they work with impacts

@nelsonbrum8496 2 жыл бұрын

I believe I've seen the Malco at the big orange home store. Near the plumbing tools.

@VashtheReapr 2 жыл бұрын

I love the Malcos, the handle is great for making circular cuts and right angles. And replaceable blades

@BAnk-my2my 4 жыл бұрын

That attachment looks like it would work great for metal roofing & siding thanks for sharing. I'm curious how good it would cut diamond plate

@Thedoug369 4 жыл бұрын

I've been using these for years to cute frp ( fiberglass reinforced plastic ) and absolutely love the things. I would definitely recommend using a screw gun instead of a drill, because drills generally don't have the rpms of screw guns. Awesome tool!

@paulmelville11 2 жыл бұрын

Nice. Does the blade stay sharp? Any need to sharpen etc?

@tarvokallaste8327 5 жыл бұрын

Cool stuff but for very, very rough work, I'm a tinsmith and snips do just fine. Nice video buddy.

@jamesdowney854 5 жыл бұрын

As a retired tin knocker that could save me time building stuff for my grandchildren.

@jamesdowney854 4 жыл бұрын

@@macbook802 I'm a master Mac of my trade not some Yahoo even retired because of health and survived Cancer and Heart attack open heart surgery and 4 stokes and dying 3 times on surgery table and uncounted other health problems I still have enough brain cells not to allow children with sharp edges or hot things though my autistic grandson has turned 8 it will still be a couple of years before I teach him to weld as at 8 he is still better than his dad my dumbass son in law with tools and reminds me to clean up and take care of the tools I still own since I gave half to my son 39 because he has told my family he is going to get all of pop pops tools when he dies in 30 years which I'm happy he gave me 30 years to give him the tools an says I should have enough time to teach him everything I know before I go. I'm still laughing at this my youngest granddaughter will be fighting him for some of the tools at 3 she is very good with her hands and mechanical things always walking around with a screwdriver tightening screws that might be loose..and my grandson what's me to teach teach him to sharpen his mom's kitchen knifes as he see me do it every month with a flat stone and tell him everything I'm doing an why. Teach children when their young and you won't have problems when the grow older..Jvd local 28 tinknocker

@Lee.Davis_onesandzeros 3 жыл бұрын

@@jamesdowney854 ok boomer

@jamesdowney854 3 жыл бұрын

@@Lee.Davis_onesandzeros did we work together yes I was a Boomer following the jobs and money have union card an tools will travel..get married have kids bad thing is their always hungry and need clothing so you go where the work is..

@the74rrhotline 3 жыл бұрын

Lee davis you’re a troll or just a low grade tool?

@reddevil_r32 3 жыл бұрын

@@the74rrhotline stop crying snowflake.

@Guardducks 3 жыл бұрын

Gotta give you props Vince this was a cool attachment. I remember cutting lath with a grinder all the sparks hitting me in the face, not cool burns and stings and this will take all the sting cutting lath.

@zamboner 4 жыл бұрын

Does is leave the cut edge more waivy? Vs a regular 3 point shear ??

@tekjoey 3 жыл бұрын

Honestly, one of the best outros I've ever seen

@duanneyates955 3 жыл бұрын

🤣🤣🤦‍♂️

@Don-xs5tk 3 жыл бұрын

Question is can it be operated with one hand after he cuts the other one off?

@slippedwrenches 4 жыл бұрын

I love that thing. Works great 👍🏻

@mexdude528 4 жыл бұрын

Stumbled upon this by pure chance, you title caught my eye. Awesome video, love your personal style and enthusiasm! Keep up the great work!

@VCGConstruction 4 жыл бұрын

Thanks dude, we appreciate it!

@bobbycraig309 5 жыл бұрын

Vince....Dewalt also makes a Right angle drill attachment similar to those shears

@duncdunc76 5 жыл бұрын

The right angle drill attachment is Awesome!! Saves me so much time and frustration all the time!!

@Fee.1 4 жыл бұрын

I thought you said the model was “the wash River” 😭

@rshutterbug47 2 жыл бұрын

You Had Me Befor Bou That Cutter Has Got to Be ONE OF THE BEST TOOLS EVER & I Told 6 people Before I Finished The Video THANK YOU THANK YOU THANK YOU 👍👍👍👍👍

@ATthemusician 2 жыл бұрын

I do gutter installation and most jobs we have tear off and we have to cut the scrap gutter so it'll fit in the truck bed. This looks like an absolute godsend especially since I'll just be cutting aluminum with it.

@JettyBuilder 3 жыл бұрын

“Arthwoitiss!”

@andrewbendle7084 5 жыл бұрын

I think any duct worker would love that.

@tophan6931 3 жыл бұрын

I've used the Malco version but this one seems to cut a little smoother.

@Eckerd84 3 жыл бұрын

We do.

@michaelcivitano7418 3 жыл бұрын

I use these at work to cut metal roofing panels. Work pretty good.

@rodneyferguson446 3 жыл бұрын

I bought one of these a year or so ago and they work well.

@darvaish4552 4 жыл бұрын

your personality is like that elder brother in family, that go to him when any one is stuck. and you be cool man no worries. :)

@CraigularjJoeWoodworks 3 жыл бұрын

Weird

@davidmyers5417 5 жыл бұрын

they sell power shears for metal roofs and sheet metal. I've used many times Hitachi shears

@davidjohoson8397 4 жыл бұрын

I'm a union carpenter and I do metal studs and we use metal shears for heavy gauge flat metal all the time but there's definitely a difference between shears and this attachment.... This attachment design seems to be more like tin snips which is a good thing for cutting metal studs... I think I'll buy me one and try it out

@newgeneration3496 2 жыл бұрын

This thing rocks, used it 2x’s on duct work and it’s paid for it self, especially shines on doing circle cuts for take offs

@jwessonsr7503 3 жыл бұрын

Like it. Good attachment for the bag...

@meagaindave2049 5 жыл бұрын

After ALL those years of struggling with snipping the flange off of pieces of track!!! Pretty cool DeWalt. Thanks Vince and God bless!! 😁👍✌️

@VCGConstruction 5 жыл бұрын

Thank you David!

@madeinusa1576 5 жыл бұрын

It definitely nice addition to the arsenal but I love my Malcos!

@proverbs2life 5 жыл бұрын

Midwest are better

@madeinusa1576 5 жыл бұрын

Didn’t know Midwest’ had a shear attachment for drills? Midwest is go to for snips but the malco shear attachment is vicious

@proverbs2life 5 жыл бұрын

I'm sorry I have no idea why I thought you meant manual snips lol yea malco are very good however, I just got these Dewalt shears and they seem to be well made and I do like the versatile design

@madeinusa1576 5 жыл бұрын

Their definitely a great design and very versatile!

@lgux700 4 жыл бұрын

Malco all the way! In hvac and use for every furnace cabinet cutout.

@johnnyweymer7622 4 жыл бұрын

These knibblers work great use them on vinyl siding and metal roofing

@James-fr9sq 3 жыл бұрын

Awesome! Just what I need! 👍

@jdreynolds29 5 жыл бұрын

Another high-quality Malco sheet metal drill attachment that I absolutely love actually I have two of them there two different sizes it is the Malco hc1 and hc2 basically the hc1 goes up to a 12 inch circle can THC to will cut a hole up to 20 in

@xenonram 5 жыл бұрын

I doubt it's made by Malco.

@jdreynolds29 5 жыл бұрын

@@xenonram you doubt what is made by Malco the hc1 and hc2 are definitely made by Malco , so is the other two tools that are mentioned the ts1 and the tscm

@briandjordjevic9969 5 жыл бұрын

🤣 great video subscribed and happy I did

@MarkIzaguirre 4 жыл бұрын

Seen and used this thing. It’s nuts 👏🏽

@wing_nut_1018 4 жыл бұрын

I've got one of these, but it's used for cutting FC, stuff like soffit. Malco makes it, it beats using a saw or a grinder. It makes it so much faster, highly recommend.

@dantheman9395 5 жыл бұрын

Looks like it does better than dedicated electric shears. Congratulations on 75k cuz

@VCGConstruction 5 жыл бұрын

Thanks Dan the man!!

@spasticpanda8933 2 жыл бұрын

When you snip metal all day, you never realize how strong your grip gets until you shake someones hand and they proceed to try and squeeze harder themselves haha. Tinner life

@carcrazy171 2 жыл бұрын

I use these daily for metal roofing great product

@rogerbernal3066 3 жыл бұрын

Already bought this it’s awesome for my job

@shannonshay1638 5 жыл бұрын

It's a turbo shear . Malco tools make something similar to this without all the attachments. They are around $60/80 . Most HVAC supply houses sell them .

@jakejohnson4915 5 жыл бұрын

And there not all plastic either

@towdoctor670 3 жыл бұрын

4:48 convinced he left that in to get me to comment but I don't care. I was like wonder how that does on fingers...

@t-rex4211 2 жыл бұрын

This is perfect for places like lofts doing fireproofing where you can’t use abrasive wheels with sparks etc. I’m getting one 👍

@7s29 3 жыл бұрын

I just purchased one of these. They're universal, and fit competitor impact drivers as well.

@jlo6388 5 жыл бұрын

I have zero need for this attachment. But I am going to buy it the next time I’m at the store.

@moobcars6490 5 жыл бұрын

Because what if you need it and you don't have it?

@ericstyles3724 5 жыл бұрын

atta guy!! indulge that curiousity to the level of need, even if it's only a want to see. or Buy it at Wal-Mart w a credit card, use it till the curiousity is fufilled & return it the next day for a full refund. 😉

@rj7826 3 жыл бұрын

Amazing that he got through this video without needing a band-aid at a minimum.

@optimumperformance 3 жыл бұрын

Picked one up yesterday thanks to this video

@dimitardimitrov9781 4 жыл бұрын

Safety first! Gloves are an absolute must in this kind of work

@h8ncars 5 жыл бұрын

You know what’s a beast....? Them CV’s in the background.

@cslimfu336 5 жыл бұрын

When the bass kicks in and the vegas are pumping.

@konamanstudio2447 5 жыл бұрын

It is one cool tool I just wish I had a use for it so I had to excuse the buy it keep up the great work guys and take care

@VCGConstruction 5 жыл бұрын

Thank you Kona!!

@konamanstudio2447 5 жыл бұрын

@@carsongoodman5581 they also make another one for granite tile for roof cutter like that but I I'm not buying that one either but if you want to buy them for me I'll thank you very much if you want to buy me any tools to review we're just cuz you're so generous I say thank you🤣😆😂😁😄😉😅😃😆😂😁😃😂😅😆😆🤣😉