Thanks George we appreciate that, and we’re glad the videos are helpful!

It would be real nice if you could add pictures when leaving comments like ummm everywhere with a few exceptions. A way around it is upload a vid to KZfaq my next reply will have the link

This guy is a dip shit.

How can you be new to power tools? Did you just start construction? Or have you always just worked around people that have them but never bothered to try them bcz ur so old fashioned?

Ed Crespo “New” as in the details regarding them. I had an general knowledge as far as what they are but I didn’t know the nuances for instance “hammer drills, brushless motors etc.” I didn’t know anything about that stuff. I recently got promoted at my day job that requires “handyman” work so I’m making myself more familiar with details about them.

"Let me tell ya something"

26:55 and "this video will be brief" :) Still a decent video :)

I agree Leo - "...we're gonna make this one brief - 0:52", could have been summed up with one or two sentences... Even if you didn't want to sum it up like that; at 4:25, he already stated why he wouldn't buy these kit's. And that's the other thing - for the first min. and a half, based on the words he used and the way he presented this, it sounding like he, "was NEVER going to use these kit's EVER again!!" LOL Seriously? Almost 27 min... "for clear lids?" Yeah, no kidding their better, but that's 27 min's I'll never get back again! My impression is Vince likes to ham it up with a lot of fluff and pauses that seemed like he didn't know the end of a few of his thoughts. Good effort Vince, but try to take into consideration that other people's time is valuable to them.

@@TheeSSgtRod haha good on ya my friend, for the detailed analysis !!!

Lol

😂🤣😂🤣😂🤣 Exactly

😂🤣😂🤣😂🤣

😂😂😂😂

is it not the standard to tell everybody your busy?

What a lovely dumb; ass

Dewalt must be the ones giving buck

Haha, I thought the same thing

Haha 😂

Waffles on worse than the wife

Love the vids but do wish they were about 75% shorter. I end up rarely watching the whole thing and jumping through a lot missing so much.

THIS Moe_RON is incapable of getting to the point in ANY sort of reasonable manner.. @ 6:00 we learn, “I haven’t used these bits yet...” Jesus, thought that’s reason we’re here. Prolly more ‘useful’ FYI after that...IDK. 🤷🏻‍♂️ 🤷🏾‍♂️

but at least we know it has a clear lid now.

Chris Jennings Beat me to it

Love his reviews but he is very long winded and takes the short 27 minutes to say just buy the box in which you can see the bits. Personally I have the yellow box, but I know exactly what's in it without having to use a sharpie. I have the one for bits, and I have a red one for drill bits: color coded: KISS (keep it simple stupid) I've been told. I do have a clear one with all specialty bits including a larger sample of torx bits, including the safety ones. I mean just a T20 and T25 doesn't cut it. There are T10 head screws so now you're phucked without one. Just my 2 cents

Wish I could like this but I don’t wanna ruin the count keep on doin da whammy

All of their videos are this way. 45 seconds of useful information dragged out into a twenty plus minute video to keep their watch time metric up and the ad money rolling in. I despise this tactic. Just give us the damn information and scrap all the useless repetitive stuff. Plus his personality is annoyingly high energy

@@AndrewServin he doesn't have mid rolls so the over 10 minute mark means nothing in terms of ad revenue

Hey the guy makes sense is trying to explain what's out there for homebuilders or DIY people I'm a pro for 30 years I like the videos

More time talking about bits is more money for them

Color 'em. Don't have to read then it's even faster

I make superkits myself too brother

The fact they attach to one another is honestly pretty awesome and would be nice I need to get some new kitsch anyways haha🤷‍♂️🤷‍♂️

You can label it, but you are wont keep a running list/inventory of each bit. Missing bits, or a custom kit with different bits would be harder to simply label the contents. A clear lid, gives you all the info you need at a glance. Time saving.

The lazy issue. 😂

It's helpful if you could see the content before you buy them

I mean, I like the fact its clear... but it ain't gonna make my purchase descision!

27 minutes to tell us about a see through case

The box I bought, showed what was inside, and it didn't have a clear cover...🤔

Been using battery screwdrivers since the eighties and the best bits I've found are dewalt ,I buy small clear box of 50 or 25 pz2 ,and I've tried them all including impact bits they all break but the dewalt last longer and are cheaper

Get well soon !

A little masking tape on the bit then force it in the bit holder. Bit will only come out with pliers. Cheaper than buying 2 inch bits and they will be magnetic.

I have the opposite problem, the holder requires a few whacks on something sturdy to release the bit. I keep the same bit in until it breaks or wears out, and just swap the holder out entirely with a 2" bit when changing to different screws, seems counter intuitive but it's faster than fighting with it.

Magnetic!!!!!!! 👍👍👍👍👍👍👍👍👍 Vince Great Video ✌✌✌✌✌✌

Thanks Mike we appreciate it!!

Thank you Rob and Sarah! Have a great weekend!

Just said the same thing. Kits suck!

Good tips Tim we all appreciate!!

Kids can easily learn handling the non-magnetic as well.

And this was a brief one...

To much unnecessary BS.....I only watched half of it and got tired... should go straight to the point ....

Your comment is way too long. You should just STFU scrub.

🖕

@@edcrespo1722 excuse me dude I didn't know you were so soft on something that wasn't even direct it at you. "Private attorney"

Boom!!

looks like two peas in the same pod since you have to write a dissertation instead of a comment.

150,000 people disagree with you Red Robb.

I have a hard time understanding how he is wrong. Vince most certainly seems to like to hear himself talk but it could be clouded by the fact that he is a KZfaqr. He probably feels like he is doing everything right but he most certainly drags on and takes a long time. Regardless, constructive criticism is always a good thing and shouldn't be considered being negative.

First-Just write the contents on the boxes. Second- Put a runber band around the boxes. Done in less than four minutes. I think that you like to brag on the job or at the pub what a great KZfaq star you are.

Seems nice enough but imagine him as your boss on the site, nothing gets done but he feels good about telling you over and over.

proven* ahh Christ I sound like MY wife

Thanks Troy, we appreciate it!

Thanks Scott we appreciate it!

Thanks Jason!

I once saw a vid by a guy called Techmoan on YT... he was restoring a record player with a clear plastic top. He used Brasso, wad of material in a can (not the liquid version) to "sand" clear plastic smooth. Its a hidden gem. From England I believe.

What a beautiful tool tip you wonderful human nowhere on KZfaq is a video showing such a simple and awesome solution.

@@ared18t no problem, one of my bosses is 88 ,so he knows tons of tricks, i'm an auto body guy , by the way, so we do a bit of everything, so he teaches me all the usefull engineering tricks

Great tip

Or the rubber band trick

@@KARLOS121 i don't know the rubber band trick,,,,help

Where do you get those?! Never heard of them. Genius!

Yes please offer us the empty box

With most of these boxes you can slide out the inserts and build your own box of bits.

3 minutes of info packed into a 25 min video

@@Stan9106 repeat repeat anoy

Is 1 hour of rambling. Watch a tool comparison video lol

I agree. 30 minutes of shouting with basically zero information value. Waste of time.

because you are dealing with an idiot

Thank you Chris!

Paid by Milwaukee and using Dewalt tools...very funny....lol btw did you watched entire video?? He love new bits kits!! from Dewalt...i won't buy older...

@@KallenSC he's paid by Milwaukee , that's true. you can watch all his videos

@@locdo1706 Then why this man paid by milwukee buying and using Makita tools and Dewalt tools??;)

You should watch all his videos, he always defaming Dewalt , in some videos he use some small Dewalt products or Makita to make people believe in he also use Makita and Dewalt.

Sorry Stephen, visit the states on “business “ !

James Sullivan ---- You sir are absolutely correct. But, you have to be an actual real tradesman who has worked commercial construction or trades for a long time to know that Apex is the best. Hands down. You won't find them at Home Depot or Lowe's or any other fake contractor's supply chain. You could have made a 90 second video saying that and saved hundreds of people 25 minutes of their precious time that none of us has to waste. Check out my other post if you want a chuckle.

Good morning. Yes I'm aware that Apex isn't available at those store's... I worked at a store called AAA Wholesale tool &supply in Northridge, California. They were in business for 40 year's. But, sadly they closed in 2017. Because of home depot..... People didn't want quality.... Just crap instead.

@@jamessullivan9574 ---- I knew that place. I grew up and lived next to LAX until I was 30 yrs old and I spent 16 years as a union journeyman wireman, now I am licensed and have my own business and I live in Woodland Hills. Its hard to find the real construction supply wholesale houses anymore. I worked for Bergelectric as a driver before i was an apprentice and we bought most of our expendables( hacksaw blades, bits, tips, hole saws, arbors etc... ) and hand tools like socket sets and Allen sets, tin snips, etc...) from Martin Supply in downtown off Washington near Long Beach Blvd. . After I was a driver for a year making pickups at that shop daily, I became warehouse foreman and I was making purchases spending a lot of money with them, so a couple years go by and I become an apprentice and was leaving the warehouse job the salesmen at Martin had me come over and they took me to lunch and afterwards one of the managers had me walk with him throughout the warehouse and he pulled every tool an Apprentice electrician needs and some extras, probably close to $700 or more back in '89 all Klein and Lennox and gave me all that to help me out because I had given them millions of dollars with of business over the couple years. I was 22 years old when I ran that warehouse for the biggest union electrical contractor on the West coast. $100 million a year in jobs.

Thanks for leaving an awesome comment Bruce!