Diablo Cold Cut Metal Saw Blade Review

Рет қаралды 12,122

3 жыл бұрын

#toolreview #evolutionchopsaw #welder
Today I open and review the Diablo 14-inch Steel Demon 72T Cermet II Carbide Ferrous Metal Saw Blade. I got this blade off Amazon like most consumables I buy. I was buying the Evo brand cold cut blades but these are a better price, so I figured I’d give one a go.
Heres the link to buy the blade:
amzn.to/3th234e

Пікірлер: 37

@elkvis 3 жыл бұрын

I run the 10" version of this blade on my chop saw, and I love it. I haven't tried the evolution blades, so I can't compare the two, but the Diablo blade is great

@randymack1782 2 жыл бұрын

thanks for the review, wondered on the blades, but I am still using abrasive chop saw, but it was Milwaukee, cheap at pawn shop, already had for a bunch of years, and thanks to a store reset, I bought dozens of new 14" abrasive wheels for about $2 each, I bought all 6 local stores had, but when I finally put last blade on, I bet I will look for a new chop saw, like Evolution

@Laura-wc5xt 3 жыл бұрын

keep us informed, I was surprised how few cuts I got on stainless with my evo stainless 14 inch blade, Paul in Orlando

@willishiland6069 3 жыл бұрын

Great video and thanks for sharing! Stay Safe!

@thomasfaucette1660 10 ай бұрын

i got to get one of those blades real soon

@JonDingle 3 жыл бұрын

I have an Evo S355 metal chop saw, l got it new last August and so far its been great. It remains to be seen how good the blade is? I have run an Evo blade on my Makita abrasive chop saw but it was a bit too fast really. I have learned not to cut through welds with the Evo blades, they dull very quickly and become useless.

@downhilldaddy9346 2 жыл бұрын

Waiting on the update

@StephenSwitzer 3 жыл бұрын

I've had lots of diablo products go through my shop and I've been happy with them but never the 14" cold cut blade.

@meocats 2 жыл бұрын

there's a dude that cut 5" solid round bar with the diablo sawzall blade .. incredible!

@loganrench5680 2 жыл бұрын

Diablo carbide sawzall blades are great

@bullwinkle7542 Жыл бұрын

Yeah I have been cutting also with my sawzall Diablo metal cutting until I purchase a metal cutting miter saw like Mikita or evolution

@hubertrobinson8825 3 жыл бұрын

I've heard of them I want to try one where did you buy it home depot around Los Angeles don't carry Diablo blades that size for the skill saw yes but I've never seen one that can fit my evolution saw

@MeltinMetalAnthony 3 жыл бұрын

amazon has them

@jimgam730 2 жыл бұрын

Since its been about 8 months now, how do you like that Diablo blade? Do you still have the same blade on you saw or have you had to swap it out? Just like to get your thoughts on it now.

@MeltinMetalAnthony 2 жыл бұрын

I ended up swapping it after cutting a few stainless tubes like a dummy.

@kaninrod2345 2 жыл бұрын

@@MeltinMetalAnthony isn't the blade made for cutting stainless as well?

@DXT61 2 жыл бұрын

Hows it holding up? I have an Evolution saw and need a new blade. Dont know if i should go back with the Evo or try Diablo. Diablo is 72 teeth compared to 66 tooth on the 14" Evo.

@MeltinMetalAnthony 2 жыл бұрын

I burnt threw it already, but lasted about 2 months

@DXT61 2 жыл бұрын

Thanks, I ordered another Evolution.

@bullwinkle7542 Жыл бұрын

Hope you get the Diablo

@bullwinkle7542 Жыл бұрын

I bought 10 inch Diablo for my radial arm saw just for cross cut steel sheet metal maybe 1/8 or 1/4 inch . Is that ok?

@alvinwilliams1648 Жыл бұрын

If it's competitive with steel demon 14" that cuts railroad track, I'd say your good !...only the radial arm saw base is wood I'm thinking !...sparks may be a problem 🤷🤷🤷🤷