No video

Diagnosing equipment that loses power after running a few minutes

  Рет қаралды 294

Guys playing with tools

Guys playing with tools

Күн бұрын

It's not always something big, always look for the little things before spending a bunch of money replacing parts. I was sure this was going to be an ignition problem, probably a bad coil. Here we go over the steps we took to determine what was really happening.
I realized later I didn't mention that bigger motors need more fuel flow and there are different filters for different types of motors.
Thanks for watching! If this helped, SUBSCRIBE! It's free and it helps us make more (and better) videos. I do my best to respond to all comments. Thanks

Пікірлер: 26
@jameshumphrey7454
@jameshumphrey7454 2 ай бұрын
That dip in rpm has a distinctive sound, I've heard that before it's always been fuel flow so far. Great diagnosis and repair video bill
@GuysPlayingWithTools
@GuysPlayingWithTools 2 ай бұрын
Hopefully it will make people slow down and think rather than run out for parts. 🙂
@rogermcdonald1607
@rogermcdonald1607 2 ай бұрын
You got the mic issue fixed! Nice diagnosis Bill. I was not thinking the fuel filter. 👍😎🥇
@GuysPlayingWithTools
@GuysPlayingWithTools 2 ай бұрын
I kinda like the new mic, it was letting me idle the blower and talk at the same time. I sound funny doing it but that's a bonus LOL I was expecting the coil to be the problem but I went in thinking it would be a diagnostics style video and I suppose got what I wanted 👍
@rogermcdonald1607
@rogermcdonald1607 2 ай бұрын
@@GuysPlayingWithTools I think you did good as throwing a new coil at would be alot more than a $2 fuel filter and still woulded have fixed the issue! 👍
@EverydayProjects
@EverydayProjects 2 ай бұрын
I was thinking fuel filter right away but I like the process of elimination you showed us. Coils can be difficult to diagnose sometimes too... quit when hot or run irregular. But You nailed it Bill! well done!!
@GuysPlayingWithTools
@GuysPlayingWithTools 2 ай бұрын
It's fun to show the process sometimes. I see too many people throwing parts at machines nowadays. Closing the spark gap to check the coil is a trick I was taught back when I worked in an engine shop.
@DIYVariety
@DIYVariety 2 ай бұрын
I was thinking coil , great job bill
@GuysPlayingWithTools
@GuysPlayingWithTools 2 ай бұрын
I was thinking coil too. I had to stop and think when the plug trick said it was OK
@garyalensr
@garyalensr 2 ай бұрын
My backpack blower was doing that exact same thing. I replaced the carb and i no longer have this issue. Its been running fantastic for well over a year now. I do only run red Armor and ethanol free fuel. Great job diagnosing this blower.
@GuysPlayingWithTools
@GuysPlayingWithTools 2 ай бұрын
I didn't say anything in the video but I was sure I was replacing the fuel diaphragm in the carb next. I was thinking "well, the filter looks bad, let's try it before going deeper." I am prepping a couple videos on fuel right now.
@garyalensr
@garyalensr 2 ай бұрын
@@GuysPlayingWithTools yeah it was weird, at the time my blower was only a couple months old and developed that issue. It was so frustrating. I tried a new filter, plug, and it still was having the problem. So I finally bought an OEM carb and problem solved. The weird thing is the carb didn't look that dirty. I even ran it through a cycle in the ultrasonic and that didn't help. I don't know maybe it was a defective carb?
@GuysPlayingWithTools
@GuysPlayingWithTools 2 ай бұрын
@@garyalensr I think you are 100% right on this one. I see this now and then where a machine isn't that old, and the fuel gasket has a bubble in it that shouldn't be there. I don't know if they are re-using parts or trying to save money buying cheaper gaskets. OEM doesn't mean what it used to, sigh.
@lewiemcneely9143
@lewiemcneely9143 2 ай бұрын
@@GuysPlayingWithTools Sounded like a carb issue to me right off but I'd had to give it the old run around just to see.
@lewiemcneely9143
@lewiemcneely9143 2 ай бұрын
@@garyalensr HI Gary and hope your hopping high! I paid $140 for a jetted carb from Ebay for the opposed twin Vanguard on my Craftsmen to get rid of that stock surging carb. That did it. Remain calm and stay after it!
@lewiemcneely9143
@lewiemcneely9143 2 ай бұрын
Good deal, Bill. The old loggter/sawyer here used coat hangers to braze with. Scarfed up every one he coud find. All mine are wood/metal or plastic. Progress? Not really, just like everything else. Stay cool, Pal!
@GuysPlayingWithTools
@GuysPlayingWithTools 2 ай бұрын
I have used that hanger for a hundred different things, they will bury me with it. Lol
@lewiemcneely9143
@lewiemcneely9143 2 ай бұрын
@@GuysPlayingWithTools Get it chromed before that, Palley!
@robertmailhos8159
@robertmailhos8159 2 ай бұрын
That was a odd sound for the back pack blower is falling on her face i have a auto lite spark plug in my Husqvarna BT 165 back pack blower nice that you got it running again Bill 💸💵
@GuysPlayingWithTools
@GuysPlayingWithTools 2 ай бұрын
I weas sure it was going to be the coil or the plug. It was unusual so I thought it would be a good video diagnosing it.
@robertmailhos8159
@robertmailhos8159 2 ай бұрын
@@GuysPlayingWithTools well at least you got it running again and made a video on the possibility of the thingy that you thought might be causing it to run great then bog down 👇👎
@themowerman
@themowerman 2 ай бұрын
It's always the fuel filter..
@GuysPlayingWithTools
@GuysPlayingWithTools 2 ай бұрын
Ooohh... You are good. 🤣
@haneyoakie14
@haneyoakie14 2 ай бұрын
I was thinking coil also
@GuysPlayingWithTools
@GuysPlayingWithTools 2 ай бұрын
Right? I checked the fuel filter first only because it wasn't stalling.
Poulan Pro saw - Complete fuel system rebuild
23:11
Guys playing with tools
Рет қаралды 204
WORLD'S SHORTEST WOMAN
00:58
Stokes Twins
Рет қаралды 206 МЛН
UNO!
00:18
БРУНО
Рет қаралды 5 МЛН
The Giant sleep in the town 👹🛏️🏡
00:24
Construction Site
Рет қаралды 20 МЛН
Honda HRA214 Won't Start
29:16
Bruce's Shop
Рет қаралды 57 М.
Splitting ash and pine for tonight‘s fire 
8:50
Living Wisconsin
Рет қаралды 264
Craftsman Lawn Mower runs weak then Dies
17:27
Small Engine DIY
Рет қаралды 259 М.
The most dangerous sound a mower can make!
9:42
Guys playing with tools
Рет қаралды 890
McLane edger carb rebuild - Old Gas strikes again
10:48
Guys playing with tools
Рет қаралды 541
Only 5% of people know about this glue application! Great DIY idea!
14:46
ECHO GT-200R Sat around for a LONG time. Getting it running
8:10
Guys playing with tools
Рет қаралды 194
Ancient Honda powered Snapper with a MEDIEVAL drive system
11:38
Guys playing with tools
Рет қаралды 425