For more tips, visit our website, www.edgetekhvac.com.
Пікірлер: 41
@boywhohadatiger2 жыл бұрын
Y’all have made me a better technician with these videos
@techfive72026 жыл бұрын
I can't even pay attention. I can't get over how much room you have to work there lol. Great vid.
@stanleyonishi33143 жыл бұрын
Great video. I'm a new tech so I'll surely use this tips. Thanks
@mikeyangel10676 жыл бұрын
highly appreciate this approach to test Locked Compressor. I recently had to test one it took me a long time to arrive at this conclusion. God Bless you.
@ritzbibit87804 жыл бұрын
Why compressor A max locked
@NoorRefrigerationsystem4 жыл бұрын
I love this channel ❤❤❤❤❤❤
@ryanlujan86135 жыл бұрын
Great video thanks brother!
@alisaleh65935 жыл бұрын
Very informative 👍
@MsFishingdog10 ай бұрын
Great video.
@denyslopez75602 жыл бұрын
Great video!!! 🔥
@mobilecommunicationsnetwor52682 жыл бұрын
A tech tip on hard start and your experience on that would be also helpful.
@rickbraden42725 жыл бұрын
Very good. Thanks.
@jamalbadhafari26346 жыл бұрын
thanks pro 👍
@Froggability4 жыл бұрын
If theres a fail in amps, next check is under the compressor terminal cover, look for a burned or loose terminal, OR occasionally thermal overload bimetal has died. Check everything, before replacing the compressor
@fridgydownunder67344 жыл бұрын
I came across to this job where I found out initially the start and run capacitor are gone, when when I came back to put new capacitors, upon start up the system compressor drawing high amps (something like struggle to start) what do you think does the compressor already gone?
@ACREPAIRINORLANDO6 жыл бұрын
GOOD INFO
@jtra11225 жыл бұрын
Thnx Greg for an informational video. My AC compressor will not start & I get a really low amp draw < 2 amps during test. Is that possibly sign of bad compressor? The compressor is not shorted. Trying to determine if the compressor can be revived.
@actechformallyyomama7465 жыл бұрын
J TRA it could be a bad run capacitor. If you draw amps on all 3 legs then install a hard start kit. A 521 rated for the size of the unit. Also check the wiring for the compressor. I’ve seen wire broken in half inside the insulation.
@flynnfranklin21874 жыл бұрын
Thank
@Gabriel-vz7ml5 ай бұрын
Thank you
@jamesmungal25593 жыл бұрын
What does it mean by those statements made at the end there: 1.Make sure pressures are equal.? 2. Or You'll be starting under a load.? Plz explaind ty
@jollyscaria1922 Жыл бұрын
Contact protacting capaciter using engizing contacting lline l1 l2 and engzing satring unit ..
@vaibhavgarg29343 жыл бұрын
My compressor won't start easily(with realy) and is drawing too much current and I can smell windings buring after running it for 2mins. I already brought 2 new compressor and it won't could there be any other issue? Any bodies help is appreciated.
@EdgeTekHVAC3 жыл бұрын
Please contact Tech Services for assistance 1.800.422.4328
@kabalbasisla18713 жыл бұрын
Red and yellow joint the connection
@Lilmiket10005 жыл бұрын
Any Idea of how to find a reputable honest HVAC company? I got shitted out of 10k from the first one. and the second one was fine until a year later and the compressor has gone out and they want another 1k to fix it. and they said that after they fix it that it could still be something that caused it to happen that ill have to cover as well. I'm starting to feel like they are trying to shit me again. after 14 thousand dollars In less than 3yrs, I should have a working ac by now! Though I know the compressor issue is possible I'm suspecting the system they put in wasn't new or was installed incorrectly by their tech which means they should cover it not me. And the system should have been new like what they charged me for.
@johnnys36024 жыл бұрын
The company you bought your system through, should have offered sometime of warranty besides just the manufacturers warranty. Covering all of that and then some. We offer 5yrs on all our retail along with a 10yr manufacturer warranty which we submit all the paperwork to make sure you're registered. Good Luck!
@skully37686 жыл бұрын
Hi I check my compressor and its read 6amps on all terminals what could be wronf
@EdgeTekHVAC6 жыл бұрын
Hi Herman, our team would need a bit more information to help you troubleshoot. Please call the technical support line M-F from 8:00-4:30 CST at 1-800-422-4328
@skully37686 жыл бұрын
Hi sorry but it was 6 ohms on each terminal on the compressor, its not grounded I check. Getting same continuity resistance value
@EdgeTekHVAC6 жыл бұрын
Hi Herman, for assistance please call the technical support line M-F from 8:00-4:30 CST at 1-800-422-4328
@diegosti4 жыл бұрын
This unit trips the breaker as soon as the contactor calls for cooling. If I disconnect the compressor the cond fan runs no problem. Compressor is not grounded and has proper ohms. Wires are not shorted at all.
@EdgeTekHVAC4 жыл бұрын
Please contact Technical Services if you need assistance.
@diegosti4 жыл бұрын
Locked compressor! It was a question for you:)
@misterkool55563 жыл бұрын
diego what does he mean un even presssures before starting? Mine has this and won't start. I'm a plumber so I know just enough to be dangerous but have never come across this problem.
@misterkool55563 жыл бұрын
How do I equal the pressures before start
@EdgeTekHVAC3 жыл бұрын
Please contact Nortek Tech Services for assistance 1.800.422.4328
@thembones122 жыл бұрын
Turn off compressor for several minutes and watch the suction and discharge pressure...it will equal...
@actechformallyyomama7465 жыл бұрын
You said +- 10% the cap said 5% its not normally more than 6%.
@clamper75 жыл бұрын
Wrong mamma, he is right, what is written on the capacitor from the manufacturer guaranteeing that the cap is within +/- 5 when purchased