Diagnosing rear suspension noise 2008 Toyota Camry

Рет қаралды 145,851

7 жыл бұрын

Here are some of the tools that jimthecarguy uses
www.amazon.com/shop/jimthecarguy
Diagnosing rear suspension noise and replace the sway bar links and bushings on a 2008 Toyota Camry.
Disclaimer:
Due to factors beyond the control of jimthecarguy, it cannot guarantee against unauthorized modifications of this information,. jimthecarguy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. jimthecarguy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, chemicals, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of jimthecarguy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not jimthecarguy.

Пікірлер: 175

@rmp608 5 жыл бұрын

All mechanics in training should watch how this honest man conducts his business!!

@jimthecarguy 5 жыл бұрын

Thanks for watching and your feedback

@mrcokez1 5 жыл бұрын

the depressing thing is i actually got fired from a small shop for telling the truth, instead of telling the customer he needed a procedure to be done that costed several hundred dollars i instead suggested something else that costed barely anything and was the root of the problem ($20 if that). i understand people need to make their bread and butter but i also believe people deserve a fair shake and honesty. something my mentor taught me when i went to automotive technician school and i still stand by that rule today. I'm a young tech BTW

@mrcokez1 5 жыл бұрын

Jim reminds me of my mentor and i can appreciate his honesty and integrity. Thanks Jim

@victorzamora9998 5 жыл бұрын

jimthecarguy hello Sr I have a 08 camry and when I drive with my windows open I hear a noise like a lot a big flappy noise on the back tires and the shocks are good tires new please can you give me your advice?

@rondhole 3 жыл бұрын

@@jimthecarguy Thanks for showing us this, I miss this kind of mechanics who really fix the real problems instead of trying different things without proper diagnosis.

@bygonebob Жыл бұрын

New subscriber here, Jim. Just want to let you know that I’m not skippin’ any ads on your videos. This is how we appreciate your honesty and straightforwardness in doing your job. May God bless you and your shop.

@robroy4058 7 жыл бұрын

Keep up the videos Jim. As a apprentice technician I really learn alot from these videos. You are good a explaining things, and your videos are detailed and not over edited with bull crap.

@hawaiianf1504 6 жыл бұрын

Awesome! Thanks Jim !! -- I had some issues with wife's 2007 V6 3.5L Camry with 90K miles. I too needed to replace the end links and sway bar bushings. I used Moog parts and all was right in the world. Was super easy and quick. -- I always try to get the best parts that I can. Go in -- don't rush -- do the needed work right and with the best parts available -- and get out. The world becomes a happy place once more. -- Thanks Jim - You always host up some of the best videos! -- Mahalo's!!

@salemrahim1357 2 жыл бұрын

i wish technicians like you existed in my town.I found your video very rewarding.I was frustrated with that noise.Keep it up with your info.Thanks once again.

@blthetube1 4 жыл бұрын

I am so grateful to all the working stiffs that take the time to enlighten all of us do it yourselfers and those who just don't want to get ripped off...Thanks.

@semco72057 6 жыл бұрын

One thing I noticed about the installation of the new parts was that you made sure the grease fittings was in the correct position so they could be greased, and that is important. I do the same thing when working on my vehicles, and tractors. That will extend the life of all parts on your vehicles.

@Pucho57 5 жыл бұрын

This is a very good video. Clear explanation and very explicit details on how to perform the whole job. Thanks so much for posting and for your recommendations. This is exactly the problem I experienced with my 2005 Camry, and you hit the nail!

@b.thompson9176 4 жыл бұрын

Funny thing is, I remember watching your vid on replacing a strut for a 2008 Camry and in thinking the issue with my 2008 Camry was a worn out rear strut, I purchased two. Thankfully I never installed them and am able to get a refund, as I checked both bushings and links to find out they were very worn out. Saved me roughly $300 in needless repair and I was able to get a set of Moog bushings and links with zerks for around $120. Thanks for posting this vid, much appreciated!!

@jimthecarguy 4 жыл бұрын

Glad I could help!

@Justamedic77 6 ай бұрын

I know this video is older but it was a huge help. I replaced the rear struts on my 2007 camry and even though the struts were bad i discovered those bushing were too.

@gordon5682 5 жыл бұрын

Thank you for posting your video and sharing your knowledge. I live in Vancouver Canada and have a 2007 Camry with 175,000 km that has been making a clunking/rattling noise when driving over bumps in the road and couldn’t figure out the source of the problem. Your video has been very helpful.

@jimthecarguy 5 жыл бұрын

I'm happy to help. Thanks for watching. Don't forget to hit the bell for notifications when a new video is posted.

@wes1934 3 жыл бұрын

Hi Jim. Thank you for doing what you do. I've become quite distrusting toward many car mechanics in my locality which has forced me to learn a lot and do things myself in order to maintain a (very) high-mileage car. 450,000+ miles on this engine/transmission currently, but still running strong. '09 2.4 Camry here --- when i replaced the front links, there were no allen-hole slots to stop it from turning. I used a thin vice-grip on the rotating-bolt itself from the inner-side between the sway-link head and the bolt slot. Then I was able to torque it down to spec value from the outer side. I was weary that the vice grip might tear the new rubber head of the sway link, but it did not and worked out okay. I've never replaced the sway bar bushings and now I realize, after many other replacements, that the bushings are probably the cause of the noise I've been hearing so long.

@jimthecarguy 3 жыл бұрын

Wow 450K that is a lot of miles

@fvk32771 6 жыл бұрын

Excellent video. I like the way he points out the bolt sizes and the tools used. Goes through things very clearly, slowly and methodically. Thank you.

@jimthecarguy 6 жыл бұрын

Thank you for watching

@davidwelday3276 2 жыл бұрын

Mother in law's 2002 Camry 175,000 miles has the same issues front and back. Great video! Between you, AMD the Car Care Nut, and Scotty Kilmer I'll have this thing going like its brand new

@bobstark4201 Жыл бұрын

Thank you so much. You eased my mind. Just a DIY mechanic and I installed new OEM strut assembly on my 07 Camry in the rear. Torque to spec. Replaced sway bar links. Have that rattle going on. Was worried I did something horribly wrong.

@sirsweetness8332 4 жыл бұрын

Replaced my rear sway bar bushings today. 2011 Camry. Moog. Took me 1.5 total hours from walking out of the house to walking back in. Old bushings didn’t look bad, they were even still soft. I did see a small oval part but it was hard to see. Go slow on the 12 mm bolts and use plenty of penetrating fluid. Go out and back in to get female threads of nut lubricated. If you sense any difficulty turning bolt, stop and go back in and re-lubricate. End links are 2 months old along with new KYB struts. Use wire brush on bolts before reinstalling. $17 Moog bushings. Noise is gone. Put rear wheels on (2) 2 X 6 boards and kept slight pressure on floor jack on center cross member. Easy job after breaking 12 mm bolts loose. Plenty of prayer before hand. 😃

@jimthecarguy 4 жыл бұрын

Thanks for watching.

@mikeashford9240 4 жыл бұрын

Jim I really enjoyed the explanation and demonstration of this project the demo of the tools that were needed fantastic A-1 video ...

@jtganno2693 6 жыл бұрын

If you don’t have the links with the nut, and your Allen strips you can avoid cutting them off with a saws-all by carefully and firmly grabbing the back with a thin vice grips. Great video, Important to do everything in order like he describes.

@vishwa7071 5 жыл бұрын

Thank you Jim for the video. i have 97 Camry V6 with 390k kms. I had the same clunking noise coming from rear of the car. i took the wheels out and looked everywhere. found that the swaybar had little play around the bushings exactly how you showed and also it was sliding a little bit too. i have to order new bushings and will take time to arrive. i taped a little cloth tape around the bar before putting same bushings on just to check out if the noise is related to the bushing. went for a drive and the clunking noise was gone. i will wait for my new bushings 17mm to arrive so that i can install it. it was easy fix. thanks. Vish

@jimthecarguy 5 жыл бұрын

Great it is hard to believe that the little play in that bushing can make so much noise but it does. I'm happy to help. Watch for the next free tool giveaway coming soon.

@wyattoneable 7 жыл бұрын

Oh yeah, I can see the play your talking about. Pretty amazing that's all it takes to make a racket. Nice fix and commentary.

@sirsweetness8332 4 жыл бұрын

2011 Camry, had vibration and a knocking sound in rear passenger area. Importance of a visual inspection. Got under and found a locking nut loose on a rear lateral link. 4 threads showing. The other locking nut was barely wrench tight. Had 9 and 3 play on wheel which was unlocked threads knocking. Adjusted alignment and took for ride and feels and sounds 100% better. Stealership would have replaced entire rear suspension. Also importance of knowing how to work on own car. Having 20 years backyard knowledge. 👍

@wallyg.2409 7 жыл бұрын

You're a good guy Jim. To bad he didn't bring it to you in the first place.

@frankv2314 5 жыл бұрын

This guy is the real deal. God Bless you Sir. 🤗

@jimthecarguy 5 жыл бұрын

Thank you for watching.

@TheEagle713 6 жыл бұрын

You can also get vice grips on the old links to hold them if the Allen key strips out.

@bluecast1430 3 жыл бұрын

I literally have this exact problem & KNEW it was My bushings! My teacher taught Me well. S/O to Mr. Cabraro, 🙏🏽... I'm gonna fix this tomorrow MYSELF!

@muzguz7276 4 жыл бұрын

Thanks Jim for taking the effort to do this. I'm ordering parts now. Cheers.

@jimthecarguy 4 жыл бұрын

Hope you enjoy it!

@shawshaw8178 2 жыл бұрын

very clear instructions, and more importantly, an honest and great man! thanks and subscribed.

@samrugtiv5563 7 жыл бұрын

Good job him, and good parts w grease fiting.very well done and you explained it well .thanks for the video. sam

@mohke42 5 жыл бұрын

Hi Jim, just wanted to comment to your video as a return to your efforts sharing your knowledge. your approach is as fully informative as simple easy to understand. liked the way you disputed other mechanic who replaced struts ending up same noise still exist, un rationalized waste of money, aside of alignment cost as well. Thumbs up 👍and of course a subscribe..

@comingundone27 7 жыл бұрын

Glad I am not the only one who talks with my hands while on the phone with a customer haha.

@brianshanahan3878 6 жыл бұрын

Great video. Great camera positioning and lighting. I also like the way you explain things! I will subscribe!

@jimthecarguy 6 жыл бұрын

I'm happy to help. Live stream Sunday night at 7:00 PM on jimthecarguy.I hope you can stop by.

@mannypeligroso 7 жыл бұрын

I have the same car, another common source of clunk is the very top of the rear strut hitting up against the metal frame on car where it's positioned and secured in the three holes, basically the top strut mount hitting the metal part on car and no cushioning in between. I removed both rear struts and added a thick of layer felt on top of the strut mount and that fixed it. There is already toyota oem felt there, but it wears down after time to the point where it's just metal hitting metal and clunks each time you go over bumps.

@SuperDuper0805 6 жыл бұрын

mannypeligroso i think i have the same issue as your car. It sounds like a clunk noise coming out of my trunk. How did you fix that? What kind of felt did you use?

@roncyr2496 5 жыл бұрын

Great channel. Very helpful tips and instructions.

@TheDisgruntledMechanic 7 жыл бұрын

Good job Jim. I would have replaced the links also while I was in there.

@jimmyjohn2293 6 ай бұрын

U have been a great help, thanks for ur content sir

@Mr2pint 3 жыл бұрын

Trailing arm bushes are prone to noise on these as well, good video...

@jimthecarguy 3 жыл бұрын

Thanks for watching

@LivingWithTheGuzmans 6 жыл бұрын

Thank you for the info

@Alex35c 5 жыл бұрын

A little tip for the links, you can cut the rubber boot off and use a good pair of vice grips to grip the stud on the inside then remove the nut if the allen hole is rusty or stripped.

@jimthecarguy 5 жыл бұрын

I'm happy to help. Thank you for watching.

@stevenchow5874 3 жыл бұрын

Thanks for video explain, may I know what is that rubber part call of

@unebonnevie Жыл бұрын

$175 for links AND bushings with quality parts and labor!!! I'll take the deal from Jim! The bushings are easy to do, just making sure to take out the very tight 12mm bolts. The links are a bit harder to do! The stablizer links do not come with grease inside already? One would need pump in the grease? If so, what kind of grease?

@Pastaben 4 жыл бұрын

jimthecarguy, thanks for your videos. I'm looking for how to replace the evap canister on my 2011 Camry. It is located above the rear suspension crossmember. I have not found any videos on how to replace the canister. This came close, but the rear suspension crossmember looks different from my 2011. Do you have any tips, or a video I can't find? Whatever little information I can find almost seems to say I have to remove the fuel tank and a bunch of other stuff. If you have tips, I'd appreciate it much.

@jindo333333 4 жыл бұрын

wonderful job jim! 👍

@titusfive 6 жыл бұрын

Great video man. Thanks. I recently bought bushings for my girlfriend's 2005 Solara and I noticed they are much harder than the originals. They feel almost like polyurethane instead of rubber, though I didn't specifically buy performance type bushings. Should I return these and look for softer rubber ones? They are USA made "Import Direct" brand (O'Reilly's house brand I guess.) Thanks

@alisastukes1199 5 жыл бұрын

I'm having front end knocking and clicking noise any suggestions. They telling me it's my transmission but I'm not having any stalling of my gears or no symptoms of a bad transmission. Help please!!

@TheGivebackmyworld 2 жыл бұрын

Thanks for great video! Just question, is it necessary to remove the stabilizer link for changing the sway bushing? What could happen if changing the bushing without removing the link?

@Beloved20223 2 жыл бұрын

Hello! Thank you! Thank you 🙏 my 2004 Camry is making same noise in the left side. I’ll start by paying to change the sway bar bushings. Is it for front and back? Also why should they change the links also?

@gjergjidano5478 Жыл бұрын

Thanks that was a great video I have the same issue with my 2011 camry

@jimthecarguy Жыл бұрын

Thanks for watching!

@noelinesimon5370 6 жыл бұрын

Thank you excellent explanation.

@wideangle07 5 жыл бұрын

Have the same issue in my 03 Toyota Avensis,my mechanic could not find the issue,been knocking for two and a half year's.Going to get a friend to help me fix it soon.

@jimthecarguy 5 жыл бұрын

Make sure to check the links as well as the bushings.Thank for watching.

@wideangle07 5 жыл бұрын

@@jimthecarguy We did the bushings,noise is from rear left shock top,getting it replaced tomorrow.Fingers crossed noise will be gone have N.C.T. (Irish road safety test) on Saturday.

@seeingbothperspectives6020 3 жыл бұрын

Great video . . Wish i had or could find such a through and honest mechanic as "Sir Jim" ! Where u located ?

@martingreenwell2972 3 жыл бұрын

Do I need both back tires off the ground or one at a time?

@dc5723 7 жыл бұрын

Thanks very much Jim.

@steveragusa3289 7 жыл бұрын

good job Jim

@jennybonilla321 5 жыл бұрын

I have a 2005 lexus rx330, replace the rear struts, links and bushing like on this video and I still have the noise. Can you tell me what else can make the clunk noise, can it be deffective struts.

@watiu9lei 5 жыл бұрын

What could be a possibility for squeaking sound even on a flat road? I hear it intermittently when the car is moving. Is it suspension issue? Because it happened even on a flat road, I've doubt that it's my rear absorber

@axilkanful 6 жыл бұрын

I need to change the rear crossmember cradle subframe in my Toyota camry 1997 XLE because is badly rusted, any suggestions Jim? I've the basics tools.

@Zezims 7 жыл бұрын

I like your style Jim

@fieldsofomagh 7 жыл бұрын

What does loaded struts mean and why realignment ?

@georgesierra9038 6 жыл бұрын

Nice job, buddy.

@edwardmartinez580 6 жыл бұрын

Good job jimmy.

@anggaros1 3 жыл бұрын

I have clunking noise from the rear. It happens after I replace the struts, mount and insulator. Logically it must be one of the new parts that's causing it. I made sure top nut is torqued as well as the mount nuts. I even disassembled and add rubber insulators between strut and the mount but the noise is still there. Only happens at slow speed around 0-20 mph. I checked the end links and sway bar and they are not lose. Running out of ideas now.

@lexusfan100 4 жыл бұрын

do u have to jack the car or even remove tires. if one can get access to those bushing then is that ok?

@marcsmith3881 6 жыл бұрын

Great Video!

@sharoondanny718 3 жыл бұрын

It's really helpfull Thank a lot

@BILNOK1 3 жыл бұрын

Thank you for the video and for the advice!

@jimthecarguy 3 жыл бұрын

Glad it was helpful!

@cbsctomh 7 жыл бұрын

My '98 camry had the back noise but it was rear control arm bushings...

@chevalsauer 4 жыл бұрын

Hello, you've described exactly how I would describe the rear clunking sound, exactly same scenario....01 camry wagon, 380 thou ks, rear shocks replaced today with munroes and the worst clunking sound hitting small bumps from rear, way worse than before with old ones, took back they hoisted up wheels off to show me small play in bushes causing clunking over bumps, they telling me that the shocks working better now so the bushes and rear sway bar working more and bushes need replace esp at 380 thou ks, 19 yr old probably right but... it still just don't add up to me , the slack so minor and such big noise, especially when bushes rubber, honestly, it sounds like metal on metal. Just wish you had his noise recorded on drive test too..... the height also don't look any or much higher than before. Scared to take on open road it sounds so so bad. I tried spraying them all with silicon, it didnt work. How come clunking so loud and sounds like metal on metal?

@c172215s 4 жыл бұрын

You would be surprised how you can have barely any play and it will make quite a racket. Any play at all....replace them. They're cheap and easy to replace most of the time. Still amazes me sometimes and I've been doing this for 40yrs

@bluesdirt5889 4 жыл бұрын

When I go over a bump the rear end seems to twist ?

@TheColeyzzz 3 жыл бұрын

You are amazing!!! Thank you nso much for this video....saved me a ton of $$$

@jimthecarguy 3 жыл бұрын

Glad it helped!

@stevenw2866 2 жыл бұрын

Thanks for being clear and precise. Would this repair be very similar in a Lexus ES 330?

@jimthecarguy 2 жыл бұрын

I believe so

@rkgsd 4 жыл бұрын

Sankei 555 is a direct supplier to Toyota, Honda, and others. Plus, they're sealed like the OEM.

@jimthecarguy 4 жыл бұрын

Thanks for watching.

@jdspunkd Жыл бұрын

Jim, I have replaced my rear bushings, end links and strut assemblies in my 2004 Camry only to find the clunk is still there and it seems to be on the left side. I completely emptied the trunk of the spare tire and all tools to eliminate that possibility but still, the noise persists. What else could it be?

@khoalam9321 Жыл бұрын

Hi Jim, what is torque value for the brushing bracket bolts? Thank You Sir.

@geecrawdad 4 жыл бұрын

Banging from the back of the car? In New Jersey, the first place we check is the trunk!

@rubbensoria7785 4 жыл бұрын

De favor un vídeo de cómo cambiar un buje , trasero para Toyota Sienna XLE modeló 2000

@petemiller5813 7 жыл бұрын

How many miles are on the '08 Camry?

@Jay_Dahl 2 жыл бұрын

How long do those original shocks typically last on a Camry?

@joebriggs9599 7 жыл бұрын

Nice Jim how many miles on this vehicle?

@ozzstars_cars 7 жыл бұрын

Thumbs up from me Jim

@franciscogranados7213 Жыл бұрын

Thanks

@0729billy1 6 жыл бұрын

Nice job!! Do we need to put some grease inside the bushing before installing?

@jimthecarguy 6 жыл бұрын

任峰 Billy CHENG 鄭 no grease is needed

@maychieus 6 жыл бұрын

Great video you the man!

@jimthecarguy 6 жыл бұрын

maychieus LOL, thanks for the comments.

@rkgsd 4 жыл бұрын

I've always wondered about the end links. They never looked that important to me. Good to know. What's your opinion on sealed vs grease fitted?

@jimthecarguy 4 жыл бұрын

Thanks for watching.

@rockhavengamefarm3190 6 жыл бұрын

Does it making a clunking noise over bumps too? Coz mine does, after I replaced the rear struts assembly still does making clunk noise!

@jimthecarguy 6 жыл бұрын

Did you check the sway bar bushings that is a very common problem

@cassynguyen5558 4 жыл бұрын

Yeah I have a Toyota Camry 2003 and it sound like my problem like that situation that guy was having when driving, in my Car I could hear a noise every time I would go on a bump or even driving on a flat road what would you recommend?

@jimthecarguy 4 жыл бұрын

It is very common on this car I would check and replace as needed. Thanks for watching.

@peaman2424 5 жыл бұрын

Jim the Honest car guy!!

@jimthecarguy 5 жыл бұрын

I'm happy to help. Thanks for watching

@wes1934 3 жыл бұрын

are the torque specs for the 10mm bolts [holding sway bushings to frame] the same for the front and rear? I'm guessing ~30-40 ft/lbs?

@-MrRichBiker1967 5 жыл бұрын

Damn JIm ....for 175$, you could do my car anytime!!!!! No honest mechanic, would ever think of shooting so low.....where is your shop? I'm bringing it you. great video, great detailed info. ty so much.

@jimthecarguy 5 жыл бұрын

Thank you. This is a very easy job and very a common problem

@jorgetrejos9912 7 жыл бұрын

Hi Mr Jim I have a question for you I need to check my suspension So I really like your job So I want to know if you're living or working in Toronto Or where can I go to see you my friend. Thanks

@Vanessa_Martinez 4 жыл бұрын

I have the same problem with my car can I drive 12 hours out of town with this problem only thing my car isn't making no really it's just swaying. When I which lanes and going 70 miles a hour switching to different texture on the road.

@economist_roderick6377 7 ай бұрын

may I have the link to the sway bar links and bushings please? thanks.

@shakeemdashiquergomes6961 3 жыл бұрын

I have a loud noise coming from left rear, it’s a clanging while driving slow or at a steady pace. It’s loud. When I speed up it disappears.

@harryloibl5183 8 ай бұрын

Thanks buddy

@virgilhorning9295 6 жыл бұрын

I have an 08 camry and has a strange clicking noise when making sharp turns,any suggestions?

@jtganno2693 6 жыл бұрын

Cv boots/joints

@ryambo8713 6 жыл бұрын

Can I remove the rear sway link bottom nut without a lift?

@jimthecarguy 6 жыл бұрын

i do a live stream on Sunday night at 7:)) PM (EST).I will talk about this .I hope you can stop by

@tommyhf.l7880 4 жыл бұрын

I love this man. Thanks boss man

@jimthecarguy 4 жыл бұрын

Glad to help

@sagradagaming4884 3 жыл бұрын

sir i am from the phillipines i have problem with my honda crv 2003 rear sagging issues when hitting over bumps.. although my crv was no rear stabalizer link. hope that you can answer my problems.. thank you god bless.

@anggaros1 3 жыл бұрын

Struts

@hollymusselman4149 2 жыл бұрын

I have a 2006 Camry - have a terrible sway in the rear end when there is any weight in the trunk. It feels very loose / sloppy on the highway & especially when lane changing at 70 mph or above. . The rear shocks/struts have been replaced. Have had 4 wheel alignment. There is no noise from the back. it is very scary feeling ...the feeling like not good control when on the highway and changing lanes. Any thoughts on what this could be?

@ThorsDecree Жыл бұрын

could be wheel bearings. is there any wiggle / play in the wheels when it's jacked up? like side to side play, perpendicular to the axis of wheel rotation. A worn out bearing can create that sway / instability if it's bad enough, but if it's not making a sound then that might not be your issue.