Did I Find THE Epoxy Game Changer?

Рет қаралды 13,710

9 ай бұрын

The struggle is real when it comes to bubbles in epoxy or resin! Join me along in my journey of experimentation and testing of what could possibly be the answer to all your bubble problems!...maybe.
Disclaimer the epooxy I used in the video may very well be old thus cause the issues I had. Either that, or the chemical make-up of epoxy is different than that of resin - I dunno.
*ALSO - I bet you didn't even notice I spelled Anniversary wrong in the video?
🔥If you want to try Resiners AirLess Bubble Removal Machine for yourself, check it out HERE: amzn.to/46CdV55
🔥Get my NEW Portable Airbrush System HERE: duncancustomairbrush.com/prod...
🔥DISCOUNT LINKS and CODES:
▪️▪️▪️▪️▪️▪️▪️▪️▪️▪️▪️▪️▪️▪️▪️▪️▪️▪️
💦My Amazon Store
www.amazon.com/shop/duncancus...
💦 Join Creative Fabrica for ONLY $1!
www.creativefabrica.com/promo...
💦 Alumilite Epoxy Discount: Duncan10
www.alumilite.com/?oid=3&affi...
💦 TheGlitterGuy Discount: DUNCAN
www.theglitterguy.com/?ref=3-...
💦 Black Bear Alcohol Inks Discount: DUNCAN
www.blackbearglitters.com/col...
💦 Chalkola Art Supplies Discount: Duncan10
www.chalkola.com/?rfsn=487713...
Get Social With ME!
▪️▪️▪️▪️▪️▪️▪️▪️
📷 Instagram - / duncancustomairbrush
⏰ Tiktok - / duncancustomairbrush
📘 Facebook - / duncancustomairbrush
📌 Pinterest - / duncan_custom_airbrush
*By using my Affiliate links - it is no extra cost to you, but it gives me a small commission to help support my channel 😉👍 THANKS!
#diy #airbrush #epoxy

Пікірлер: 74

@RazorRivetRiot 2 ай бұрын

This dude turns the quirk meter up to 11.58274 and throws down some awesome info, I friggin love this channel! Thank you for your time, it means a lot to us that you spend it teaching us things!

@DuncanCustomAirbrush 2 ай бұрын

Thanks! Glad you enjoy it!

@Minkymamaboutique3947 6 ай бұрын

Love your personality 😂, first time I found your videos and love your humor 😂. Keep them videos coming

@abbydrake 9 ай бұрын

Taylor I have this same machine. I mix Tumbler (small) batches in mine all the time. First thing I did after my test runs was to add an old silicone coaster mold to the bottom. It keeps my cup from bouncing around so much and seemed to lessen the bubbles. Plus it protects the bottom of the machine in case of overflow. When the cycle is complete, I just spritz the top of the cup a couple times with alcohol and the bubbles are gone. Now I use Mr. Nolas glass coat. As others have pointed out, I'm not sure if resin brand makes a difference. Personally I think this machine is great. I'm a mad mixer so I always fought bubble. Now I have maybe a couple bubbles after using the machine. It's been a huge time saver for me. I know not everyone's experience will be the same though. Just my two cents.

@DuncanCustomAirbrush 9 ай бұрын

Oh cool that is fantastic to hear and grest tips I will try!

@tammygrantlandgrantland4685 7 ай бұрын

You are a hoot!!! Your family must be fantastic people!!😂

@breedlofam 8 ай бұрын

Get a small misting bottle and fill with Isopropyl Alcohol (99.9% is best). After vacuuming, spritz the top once with the alcohol and repeat the process once more.

@DuncanCustomAirbrush 8 ай бұрын

ooh nice tip!

@MileyonDisney 9 ай бұрын

That machine is a TOY. For the price of that, you can get a REAL vacuum chamber. Besides, vacuum chambers are more for silicone - for resin you want to use a pressure pot. The vacuum chamber takes too long, and the resin will run out of working time. Plus, you can only do a very small amount of resin in the thing.

@DuncanCustomAirbrush 9 ай бұрын

I couldn't get it to do what it was supposed to do. I have since watched a guy's video where he used resin in it for moulds and it worked great for him.

@Nelswifi 9 ай бұрын

Thank you for the video. I knew I wasn’t really sold on this thing. Bubbles are easy to pop with a torch and after you let it sit once mixed the gasses will pop bubbles and the torch does the rest. Can always count on you for humor that’s always a good time

@DuncanCustomAirbrush 9 ай бұрын

lol thanks!

@Altitude_Tumblers 9 ай бұрын

I appreciate you showing us this magical bubble machine…still think I will mix manually, at least I have control..thank you again! Great video!

@DuncanCustomAirbrush 9 ай бұрын

I think i know why i was having so much trouble, someone commented that this is for RESIN and that epoxy has different chemicals thus causing a different result than desired

@amberbusta633 9 ай бұрын

When mixing in the bigger cups youll have an easier time using a silicone version of the big tongue depressors opposed to that skinny metal stick youre using, it will create less bubbles for you. And for your question on the most resin people have mixed. My largest batch for 2 cups.

@DuncanCustomAirbrush 9 ай бұрын

WOW!

@tammygrantlandgrantland4685 7 ай бұрын

You make me laugh so much!! Love you videos and the fact you are so funny!!😂

@DuncanCustomAirbrush 7 ай бұрын

😉👍thank you!

@lechatbotte. 8 ай бұрын

Many resin workers use vacuum machines. I bought this one on sale just because I wanted it for small pours and didn’t want to buy a huge vacuum pot or a pressure pot. Your only removing bubbles to cure it you use a pressure pot cures under pressure

@denisehaas7250 9 ай бұрын

Thanks for another entertaining video! I have found that it works great with a 2:1 epoxy for deeper pours. It hasn't helped at all with 1:1 epoxy for tumblers.

@DuncanCustomAirbrush 9 ай бұрын

ahh that would be helpful info for those looking at using one of these

@glendawente7317 9 ай бұрын

For your molds, just spritz with alcohol to pop the bubbles. You'll have to do it a couple times as the bubbles rise. Shouldn't you be wearing your respirator when mixing epoxy?

@amberbusta633 9 ай бұрын

I have also used amazing clear cast many many times. I know you said your warmer isn't working right, but you can set your bottles in warm water to warm them up before pouring. ACC is very particular about being exact ratios or it doesnt like to set up right. And you'll probably have better luck just letting your cup sit on the counter for 5 minutes after mixing to release bubbles and then hit the top with a spritz of 99% alcohol to pop the bubbles. Your big batch flash cured because you let it sit too long in that cup, too much in a small space, the more there is the faster it warms up.

@DuncanCustomAirbrush 9 ай бұрын

Oh wow thanks! That was a lot of great info! *(I screenshot it😉👍)

@alexiarosecreates 8 ай бұрын

Same. It's the only epoxy I use. I've used all varieties from ACC. The UV resistent, the fast cure and the regular. The best method is to stir slow and then allow to sit for a few minutes and let the bubbles rise. Especially with the fast set, stir until it looks clear and bubbles disappear by the time you're adding the epoxy to the cup.

@joycepugh5347 9 ай бұрын

Hmm gonna have to check this out- to see if they sell there own epoxy- maybe you need to use with their machine - TYVM for doing this for us all

@marychilders801 8 ай бұрын

Hello! Mr. Duncan, I have a problem and a question. I have been having issues with my cups . Once I have the epoxy on, I add my first color, but when I add my second color. When I put a few drops on, it starts getting fish eye very fast, and this happens without heat. I changed to a different epoxy but didn't work. I changed cups and different alcohol inks, but it still does the same thing. Could you please give me some suggestions of what it could be. I would really appreciate it. Thank you. From Mary ann

@DuncanCustomAirbrush 8 ай бұрын

I assume you are talking about alcohol inks when you mention adding your first and second colors: the inks can tend to repel the epoxy but it is nothing to worry about, just keep going and you can smooth it out with the next coast of epoxy.

@shigatsuningen 4 күн бұрын

A friends son made a slight mistake once and spilled a barrel over a floor. So I'd say, the most I've seen used is just barely under 65 gallons 😆

@joannanicholas2566 9 ай бұрын

Watching you makes me laugh. You are a nut😂

@DuncanCustomAirbrush 8 ай бұрын

Lol, thanks! They make me laugh too!

@joshm8661 9 ай бұрын

I've only mixed small amounts of jb weld epoxy. Not the same but that's all I've done lol.

@saunjaharris9370 8 ай бұрын

The most I've mixed at one time is 8oz but I was doing a river pour charcuterie board

@PiscesCustomCreations 9 ай бұрын

Let it sit for about 20 minutes before you let the vacuum out. Kinda like an Instapot. 😉😁 Works best with your long time working epoxy. Hope that helps. BTW unfortunately your daughter will be disappointed, a magnet will not stick.😫 Just a pain in the rear end at metal detectors. 😳

@DuncanCustomAirbrush 9 ай бұрын

😆😂🤣

@gailmcginnis1431 9 ай бұрын

Great video

@DuncanCustomAirbrush 9 ай бұрын

Thanks!

@SteveM45 3 ай бұрын

13:40 I think you must gave the silicon form in the machine.

@Sirama05 8 ай бұрын

I’ve mixed 6 oz together so I can work on tumblers and business cards 🥰

@SteveM45 3 ай бұрын

Using heatgun when bubbling after.

@ItsArtByDonna 8 ай бұрын

I sent it back to Amazon! Just didn’t work! Tried a few different resins !

@kyokisaru 7 ай бұрын

Bubbleizer sounds like it adds bubbles. Lol

@user-zc8mk7mm7w 3 ай бұрын

So this is what a new vacuum chamber looks like.. oooowww... I have an old, ancient more like, version that looks like a dirty white box mini fridge that hooks to my shop vac hose. Oh! It's also windowless. Soo..yah. good times with that learning curve. (And still learning) but the most I've made was I don't know amount. 2nd mortgage range amount..? Ish. I cut 2 inch wood slabs and floored them mosaic style. Beautiful when done.

@user-zc8mk7mm7w 3 ай бұрын

14:44 I hope your daughter wasn't too disappointed by magnets not sticking to her. Because if the did, oops. Here's a side of lock jaw . If it sticks, it'll rust. Inside of her flesh. But you could find some humor with nicknames! Like Rusty. Not to be confused with any national lampoons vacations. Or do. Because "Dads going to flip out" if something like that happens to his girl! 😂

@maverhart5227 8 ай бұрын

I boil water in a bowl in the microwave and sit the epoxy in the hot water. You’ll see the bubbles popping when to bubbles stop popping you can use it, it won’t be to hot to spread over the tumbler. If you heat the epoxy to much when it starts to cools it’s gonna be gooey and you won’t be able to use it. I find this method to work well.

@DuncanCustomAirbrush 8 ай бұрын

ooh I shall try that! Thanks!

@VickyShawcooksalot 8 ай бұрын

I have a half dozen vacuum sealers. They have adapters for sealing canning jars. The same adapter is used for the storage containers. Going to sacrifice a container and make myself a vacuum chamber for my resin.😂

@DuncanCustomAirbrush 8 ай бұрын

Good luck!🤞

@VickyShawcooksalot 8 ай бұрын

@@DuncanCustomAirbrush thanks

@Aangel452 8 ай бұрын

😅after you take the cup out of the de gas chamber just use a heat gun or torch to pop any remaining top bubbles in the cup then it should be good to go!

@DuncanCustomAirbrush 7 ай бұрын

Ahh I'll have to try that! Thanks!

@krystalstarrarts3 8 ай бұрын

Most iv mixed at one time for a project was 8cups

@DuncanCustomAirbrush 8 ай бұрын

holy moley!

@virginiasimer4171 9 ай бұрын

I put water in all of my molds before using them. I have molds that require 1 1/2 cups of epoxy. It’s a lot

@DuncanCustomAirbrush 9 ай бұрын

ah good idea of how to measure!

@xpump876 5 ай бұрын

E-POOX-EE lol

@AnnetteCook 9 ай бұрын

I didn’t find a link to the BUBBLEIZER.

@DuncanCustomAirbrush 9 ай бұрын

ooh, sorry about that! Here it is: amzn.to/46CdV55

@user-zc8mk7mm7w 3 ай бұрын

Quick! Say.."but".. .. but! Like your apooxie..!

@tammygrantlandgrantland4685 7 ай бұрын

Your wife must the most amazing woman!!🎉

@ThatsNotSmoke 8 ай бұрын

I have a more professional vacuum and it does the same thing. What good are they really? I wasted my money frankly.

@teamredwaltz6249 6 ай бұрын

Have you ever thought of doing a video on "How to make your own alcohol ink".....I have a video somewhere, if I can find it.....I'll show ya

@chrissmith6862 9 ай бұрын

Welcome to the world of flash cure

@virginiasimer4171 9 ай бұрын

Bailey will be disappointed because that hardware is titanium which is not magnetic. Now she is bionic.

@DuncanCustomAirbrush 9 ай бұрын

oh well, at least she will have a stronger, ir as you said bionic, arm now, lol💪

@jeffreyhull6821 9 ай бұрын

You do not want to use vacuum on epoxy. The chemicals in there cannot work properly in a vacuum environment. The chemicals needed to cure the epoxy start to boil and evaporate under a vacuum, ruining the curing of the epoxy. Having your 2 parts of epoxy warmed up to 100 deg F before mixing is your best path along with a small lighter or heat gun to pop surface bubbles.

@DuncanCustomAirbrush 9 ай бұрын

Man thanks, that is great information - No wonder I couldn't get it to work!

@electricjoshaloo 9 ай бұрын

So no vacuum pot even for a short time could be useful to get rid of some of the bubbles? Thanks in advance

@krystalstarrarts3 8 ай бұрын

No fully true. I use a vacuum pot on every project to pull bubbles for about 5-10 min before I pour to clear up my epoxy before I pour.

@mymimiscreativity 8 ай бұрын

Lol 😂 128 oz is the most I have mixed … glitter table top

@ThatsNotSmoke 8 ай бұрын

Um, I've used mine many times and have never experienced problems with curing in my epoxy.