Didn't know my SAWMILL could do this!!!

No video

Didn't know my SAWMILL could do this!!!

Рет қаралды 29,508

Күн бұрын

Time to put the sawmill to use in a different way than the norm! We will be using it to straighten some dry beams before they go into their final placement! Thanks for watching guys! Like, Comment, and Subscribe for future content!
#sawmill #woodmizer #lumber #sawmillbusiness
Fan Mail: P.O. BOX 318 Caledonia MS 39740
Patreon:
/ wallacefarmandsawmill
🧢 HATS 🧢
www.etsy.com/s...
Merchandise 👕
www.bonfire.co...
farm-and-sawmill&
/ wallacefarmandsawmill
Join this channel to get access to perks:
/ @wallacefarmandsawmill

Пікірлер: 81

@chiplane3976 11 күн бұрын

Nice work turning warped beams into straight ones. Love your channel!

@charleswills7695 23 күн бұрын

Don't stop what you are doing it's a Great Sow

@JamesMPogue 24 күн бұрын

Y'all are super, I liked the straightening of the cypress beams, it was very informative, another use.

@derekhightower1903 5 ай бұрын

First time I noticed all your out buildings and land,can tell it's been years of building a HOME PLACE. YOU GUYS WERE THE ONES TO CONTINUE MAKING IT BIGGER AN BETTER!!!! YA'LL BE CAREFUL , NO ACCIDENTS.

@JOHNHEARN-rp1dg 5 ай бұрын

Interesting way to utilize your woodmizer ! Life Work And Adventures at Wallace Farm and Sawmill .

@clarenceburton9654 5 ай бұрын

Awesome 👏 thank you for sharing !!

@raulduranjr3762 5 ай бұрын

Great job, guys! It's not a bad haircut, after all! 😆 🤣

@daviddill4314 5 ай бұрын

Nice to see great cooperation between customer & operator. Good Job!

@williamhill9432 5 ай бұрын

I know Mr Charlie was very pleased with your skill Tyler. Another great video Brittney and Tyler, please keep them coming.

@wallacefarmandsawmill 5 ай бұрын

Thanks for watching!!

@charleseppard956 5 ай бұрын

Great Video! The Carpenters will be happy with straight beams on the ceiling especially if they have to lay up drywall or tounge and groove next to it.

@wallacefarmandsawmill 5 ай бұрын

Yes indeed! That is why we tried so hard to get them perfect!

@clementlattyak2964 5 ай бұрын

You two are well on your way to 100k subscribers. I watch a lot of sawmill videos and yours are my favorite..

@wallacefarmandsawmill 5 ай бұрын

Wow, thank you! We hope to be there by end of year!

@robertgreen8695 5 ай бұрын

Always something to learn. Keep on keeping on.

@billyshumate853 5 ай бұрын

Nice video and good job. Definitely a weather change in NC. Had sleet this morning and it's still only 36

@sidqcampbell6892 5 ай бұрын

It may have been a nasty day, but Miss Brittany was rocking it with her eye makeup! Tyler love the more stream lined hair and beard trim...

@wallacefarmandsawmill 5 ай бұрын

Thank you!! We felt rough looking in the cold rain lol

@deanross4090 4 ай бұрын

The beams look real straight. Good job.

@rickyb2200 5 ай бұрын

Great job , I've never seen straightened before . Cold and rainy here too.

@wallacefarmandsawmill 5 ай бұрын

Thanks! Yes cold needs to go one and go!

@larrylaird3616 3 ай бұрын

Good job

@NSResponder 5 ай бұрын

Timber framers I know will typically have their timbers sawn a quarter to a half inch oversize depending on the species, let them dry for a year, and then resaw them flat before they cut the joinery.

@joesphhalter4428 5 ай бұрын

And another great video thank you enjoy watching

@wallacefarmandsawmill 5 ай бұрын

Thanks for watching!

@mandmmilling3716 5 ай бұрын

What you did is called resawing. There are lots of reasons to resaw, other than true a board. I like to take old barn wood and resaw it into smaller boards, or to get fresh edges back.

@terrycannon570 5 ай бұрын

Nice Haircut Tyler. Looks Store bought to me. I had my first store bought hair cut in 2 years in January.

@beepbeepbeepgo2122 5 ай бұрын

Justin here watching your vid

@seaniepryor 5 ай бұрын

hey from nova scotia folks,,,,,,,awesome milling videos........did some free hand power saw milling today.... cold, clear and -10 degrees celsius 50 fahrenheit.......many blessings

@wallacefarmandsawmill 5 ай бұрын

50 is pretty good! We were 45 with 20mph winds!

@KG-xt4oq 5 ай бұрын

What part of Nova Scotia? When I was 9 (1980), I spent the summer in Halifax; many, many fond memories of that summer and hope one day to make another visit before I'm no longer around.

@tibetfruit2324 5 ай бұрын

Perfection!!

@jonviol Ай бұрын

Not even a hint of a bit of leg on this one . Oh Britney - the summer vids are just around the corner .

@bcoolson 5 ай бұрын

70 up here in Nebraska, be safe!

@Guywithcrazyideas 5 ай бұрын

Add to your merch a fridge magnet of both of you smiling. - no hats or glasses - it will sell

@nicholssawmillandmore 5 ай бұрын

Nice video. Jason

@MySORRELL 5 ай бұрын

THANKS!

@wallacefarmandsawmill 5 ай бұрын

You're welcome!

@philmccumbee6938 5 ай бұрын

Nice video.

@karlscaife6970 5 ай бұрын

I use double hards on my LX25 because they lsst longer than silver tips,pine and oak

@jamescallahan1058 5 ай бұрын

Right front tire on the tractor is a little low. Great video.

@johnleonard5323 5 ай бұрын

All of the tires are somewhat low on air pressure. Having them a little on the low side helps maintain a little extra traction without spinning a tire.

@jamescallahan1058 5 ай бұрын

I know that, but when he took on the whole load off the trailer the right tire went way down. Recheck the video.@@johnleonard5323

@iramatheny4367 5 ай бұрын

good video

@jbbrown7907 5 ай бұрын

Are you going to be able to saw without any hair?

@Scott-vh8qc 5 ай бұрын

Nice hair cut.

@sportsmanblack 5 ай бұрын

Your front tire, right, seems to be low on air when loaded. Great video

@lyleharkness-rv5vf 5 ай бұрын

Nice job trueing up those beams 👍 Nice looking wood, we don't have cypress where I live so I don't know much about it and what it is used for.

@wallacefarmandsawmill 5 ай бұрын

Little bit of everything! It’s basically our fur.

@jamesbrussels5776 5 ай бұрын

Hi. That is one of the reasons why you always cut over size then dry it and true it up later on the woodmizer

@natangell8470 5 ай бұрын

put some air in that back tractor tire lol

@rogerstepp3240 5 ай бұрын

Been there with tulip popular. But you had better luck.

@evquietcornerct3210 5 ай бұрын

bow, crook, kink, cup, and twist. you made your sawmill a jointer for a little bit.

@wallacefarmandsawmill 5 ай бұрын

Ha ha indeed!

@peterstevens6555 5 ай бұрын

Kia Ora & Good Afternoon from Auckland, New Zealand …great video bro …

@jbbrown7907 5 ай бұрын

You end up with several chicken house clipboards.

@davidmuise388 Ай бұрын

Hey Tyler they’re either real heavy or your tires need some air???? Yes no. Maybe??? I noticed in one other video explain ????? Please thank you

@Bobby-Love 5 ай бұрын

Are you guys under attack? I hear airplanes in lots of the video. Great video as always. Thanks!

@wallacefarmandsawmill 5 ай бұрын

Planes are always here lol!

@ddolde 11 күн бұрын

You could explain what you’re doing !

@karlscaife6970 5 ай бұрын

Called resawing

@1lilfarm 5 ай бұрын

Tyler wishing he put off that haircut for a little while??? 🥶🥶🥶

@wallacefarmandsawmill 5 ай бұрын

ABSOLUTELY! My head was COLD!

@jbbrown7907 5 ай бұрын

Miss Brittany had something she would rather do than handling timbers today?

@wallacefarmandsawmill 5 ай бұрын

Ran the camera.

@rickymurphy9173 5 ай бұрын

I cut my hair twice a year myself 😂

@user-zq4qh9bk9m 3 ай бұрын

What is happening with your second circle sawmill

@dirtycurty1202 5 ай бұрын

Is'nt about time y'all get Aiden involed with the the business a little bit? He should be able to run the tractor for y'all

@clarkwheeler8764 5 ай бұрын

You have your tractor tires loaded with fluid or just air?

@wallacefarmandsawmill 5 ай бұрын

Fluid

@clarkwheeler8764 5 ай бұрын

@@wallacefarmandsawmill Thanks for that info. You talk a whole lot about your sawmill but not so much about your other equipment. I'm more of a tractor person.