Die Grinder Show and tell for the beginner Wood Carver.

No video

Die Grinder Show and tell for the beginner Wood Carver.

Рет қаралды 39,674

Күн бұрын

Showing the Die grinders is got and what's the best out there for the beginner wood carver.Kutzall
carving burs I use link,
👇
Use code: CFUSION to save 5% on burs and disks
kutzall.com/?af...
If u wanted to buy me a coffee here is a link to my pal pal👇
www.paypal.me/...
STARBOND GLUE 👇🏻
Use code : Cfusion to save 10%
www.starbond.c...
Manpa tools👇🏻
www.manpatools.com
All the carving tools i use are in this amazon shop listed below👇
As an Amazon Associate I earn from qualifying purchases.
www.amazon.com...
etsy.me/2Usrss6
/ carving_fusion
#Diegrinder #beginner #beginnerwoodworking #Begimmerwoodcarving
#Beginnerwoodcarving
#Woodcarving #Carvingfusion

Пікірлер: 77

@raypitcher9767 2 жыл бұрын

Thanks again Jordy, I was the guy with the dilemma. Here is the Order No. Makita GD0800C Die grinder collet 6.35mm. 193143-6

@mikE_6-28 2 жыл бұрын

Hello Jordy. You're right, it friggin rips! I got to pull the trigger on this. Thanks for inspiration Jordy! And thanks to D.Grass - It's good to know that are still good/ generous people in the world.

@coop66kc 2 жыл бұрын

Love it Jordy, wish I could do eyes keep trying and still crap. Lovely gift from a very generous friend.

@Andrewgableart Жыл бұрын

I use one of these for my stone carvings. Its my primary die grinder and a Work Horse. I've had it for about 7 years, replaced the brushes once and replaced the collet once. Absolutely amazing tool!

@spikewillow4552 2 жыл бұрын

I've got the black handle one but the metal one is a beast !!! Mr D Grass your a legend dude!

@johncottle4464 12 күн бұрын

Thanks for the info ‘✌🏻😎

@gustavcarlsson6090 2 жыл бұрын

Thanks for the info about the grinders and thank you Mr Grass for giving Jordy that awesome piece of equipment. I'm looking forward to seeing Jordy create with it.

@CarvingFusion 2 жыл бұрын

Thanks gus hope you are well

@AuntIE54WeeZER 2 жыл бұрын

What a great subscriber to send this to you. Love watching you work and your appreciation.

@kendunn7330 2 жыл бұрын

That guy is keeping an open mind. Excellent job Jordy love your videos man. Keep up the good work.

@CarvingFusion 2 жыл бұрын

Thanks ken

@MarkLaurenceDesign Жыл бұрын

Good review thanks. The collet size in metric is 6mm, 1/4" is 6.35mm.

@brianmoore7910 2 жыл бұрын

Magic jordy it’s a ripper great wood spirits 👌👌👌👌

@mikeschmidt5115 7 ай бұрын

I can hear the difference in power, wow.

@brucemanley7593 2 жыл бұрын

Nice Jordy! Like the one with the hole on top...(Robin)

@glenmckelvey5952 2 жыл бұрын

Hey Jordy wicked gift that thing is a beast . Love the spirits .

@alid8646 2 жыл бұрын

I had to change the Collete on my die grinder to fit the cutzall but like you said. Was cheap enough to replace thankfully..but still a pain. Yep I'm from the UK Jordy 😁

@mulletman6318 2 жыл бұрын

I have the black handle makita great tool,what a amazing gift from mr grass 👌 mr pimple head looks mega cool jordy,I'm off to do a bit of carving now 😀

@murraypotts924 Жыл бұрын

Thanks for the video love your enthusiasm, the part number in in Australia is Makita GD0801C 1/4" (6.35mm) SJS HD Paddle Switch 7000 to 24000 rpm. Price A$499.00 from most vendors. They also have a low-speed unit which is good for sanding and buffing, but it is too slow for rapid removal of wood.

@DRUMSandBUBS Ай бұрын

What's the difference between the GD0801C and the GD0800C models?

@LJRamos111 Жыл бұрын

That grinder is an animal, good to see how you hog with it. WOW. Carry on.

@spikewillow4552 2 жыл бұрын

Link for Makita 1/4 collet is here bro www.partshopdirect.co.uk/makita-collet-cone-14-gd0800c-gd0810c-die-grinder-p193143-6/

@1crazypj 5 ай бұрын

The real advantage of air die grinders is you can control rpm very accurately when you learn to use trigger. You need rear exhaust though as front exhaust can spit oil onto parts, not good if your doing wood. Front exhaust is good for clearing chips and dust though. 6mm collet is smaller than 1/4", your right you need 6.35mm. Should also be able to get 1/8" and 3mm collets

@NorCalSucculentShop 2 жыл бұрын

I still need to get a die grinder. 😎😎😎

@garypaulson5202 2 жыл бұрын

A die grinder is so much more powerful than a Dremel that it is scary. So much more torque. I don't have the model number handy, but Makita makes one with a safety on/off paddle switch that you have to hold down for it to run. A die grinder with a simple slide switch will keep going if you drop it, or you might have to fumble around with the slide switch when you would really rather have it stop right away. Even with the safety switch, once it is turned off it will keep rotating with torque for a lot of turns while it slows down (must be a flywheel inside). It is a great tool, but give it plenty of respect...

@obeydefi6312 2 жыл бұрын

I prefer a paddle switch on my angle grinders for the safety reason. But when I'm working the 8hr shift carving the details, it gets super tiring having to grip the paddle switch down on the fat barrel of the die grinder. Much easier with just the switch all day long. 👍

@talbotcovfefe9032 4 ай бұрын

Thanks bud. Legend

@DavidGrassSr 2 жыл бұрын

We all love to watch you carve , and you have some big jobs coming up ? So , watch out with those tools, they don't know the different between flesh are wood , you deserve it ? See Ya

@CarvingFusion 2 жыл бұрын

Thanks again grass

@dojifly Жыл бұрын

Dayum, you are badass Jordy Thanks

@CarvingFusion Жыл бұрын

Wow, thanks!

@ChosenTripster01 Жыл бұрын

Some die grinders have a dual collet so you can use both 1/8 and 1/4 shanks

@CarvingFusion Жыл бұрын

@dvdknt78 Жыл бұрын

More die grinder carving please. Too scared of chainsaws 😮

@CarvingFusion Жыл бұрын

Thanks Ken and soon yes

@justcarverob9389 2 жыл бұрын

Wicked gift jordy cool spirt lol keep on holding down the fort brother lol I have been busy playing halo master chife remastered hahaha its been super hot an humid here stay strong bro carry-on just carve

@CarvingFusion 2 жыл бұрын

Lol haha just carve rob

@ptrisonic 10 ай бұрын

More like 6.35 mm

@jamesrankin9833 2 жыл бұрын

That’s awesome!! Good stuff!! Hey David Grass from Texas, do you need my address?🤞

@andrewevans3773 2 жыл бұрын

Hello jordy I bought a black handled die grinder which Is great an what I needed but I've somehow had the part you unscrew to change the burrs seize on me an now I can't change the burrs ,have you ever had this happen to you an if so could you please advise me on how to mend this ,thanks jordy thanks for all your videos they've taught me loads

@CarvingFusion 2 жыл бұрын

Sorry I do not understand

@andrewevans3773 2 жыл бұрын

@@CarvingFusion no problem.jordy I confuse myself , I meant the nut has seized that you unscrew to get to the collett . Anyway take care an keep doing what you love

@user-pr8kb8xx9j 10 ай бұрын

Those are Amazing. I can't stop looking at hole in the head.

@jrah8700 7 ай бұрын

So what is the large buffer / sander you used after the Makita? Also the Dremel you used for smaller details

@CarvingFusion 7 ай бұрын

Dremel.4300

@user-zo4cf7ni5r 2 жыл бұрын

👍

@DRUMSandBUBS Ай бұрын

Whats the difference between the GD0801C and the GD0800C models?

@CarvingFusion Ай бұрын

Speed

@ericwoodward5102 2 жыл бұрын

Share the kindness and give me your old one .

@CarvingFusion 2 жыл бұрын

Lol

@user-sz6ip1zq5y Жыл бұрын

I need burrs and bit and the die grinder I am in Botswana wood sculptor

@kjirstenboucher9682 7 ай бұрын

Hey, Jordy. Hope all is well with you. I was watching this video because I have been searching pawnshops looking for a straight die grinder. All I have found so far is the pneumatic type. So I was wondering if you could help me know what kind of air compressor is needed? I have an air compressor fom my dad, but I really don't know much about compessors either. Any good info you have on compressors and/ or pneumatic die grinders would help. Pretty sure I want one of the Makita types eventually, but I was looking at getting something cheaper to start with.

@CarvingFusion 7 ай бұрын

U need a really big air compressor to use air tools, of I was u just start off witg a cheep Harbour freight die grinder

@kjirstenboucher9682 7 ай бұрын

@@CarvingFusion thank you😊

@GaryNolanFIOC Жыл бұрын

I contacted Makita and they supply A 1/4” collet

@mastereamonkells8506 Жыл бұрын

Another great Video Jordy, and Fantastic wood spirits as always 😁👍quick question have you used the 1/8 collet and Burrs in your GD0800C as I would like to try it but would rather check if anyone has done this who has far more experience with die grinder carving, do you know if Ryan Cook has done it and was it successful, or know of anyone who has done it. I have just got a GD0800C but I now unfortunately have to get the 8mm collet as the 6mm collet comes with it here in the UK.

@CarvingFusion Жыл бұрын

Hi there no I have not used the 1/8 bits in that die grinder I do think it has to much power, I know u can turn the speed down but ..

@mastereamonkells8506 Жыл бұрын

@@CarvingFusion thanks Jordy much appreciated as always 👍

@woodenheart3494 2 ай бұрын

hi it's me again. I noticed that my compressor isn't powerful enough to use the 1/4 kutzall bits, and I was thinking about alternatives.. mainly bench work, can the dremel 9100 take the 1/4 bits? I'm having a hard time finding information on this. If they aren't compatible, I was thinking of the Makita GD0603 straight grinder, it looks like a dremel due to its small size, but it only has 240W. are quite? otherwise there are the larger classic ones, but they start to weigh a little too much to use them precisely on a workbench. Can you give me some advice please?

@CarvingFusion 2 ай бұрын

Hi there, a foredom is like a bigger dremel and has a flex shaft as well, I would look into the foredom SR SERIES with a industrial flex shaft and hand piece, be carefully of u do but a foredom it is not a fake, really do your research, If u look in my playlists u can see some foredom videos,

@CarvingFusion 2 ай бұрын

It is like the dremel 9100 but alot better, I have tried the dremel 9100 and did not like it myself

@woodenheart3494 2 ай бұрын

@@CarvingFusion Hi, thanks for replying, but it's a bit out of my budget... I just checked on the Foredom website, the total price, including shipping, is €430, the Dremel 9100 is certainly less since it costs half as much , but can you tell me if I can use the 1/4 kutzall tips? and if a small 240w straight grinder can be enough for these bits? Thank you

@CarvingFusion 2 ай бұрын

I don't think the dremel 9100 flex shaft tales the 1/4 bits, a die grinder is a very good tool to use and well like I show in this video :)

@woodenheart3494 2 ай бұрын

true, but I'm afraid of getting one that isn't powerful enough, I was disappointed by the compressor cutter I got. Can I ask you if you can check it if it's ok? it's the model of the makita GD603, it's very small that it doesn't look like a straight grinder, and it has less power (240w), it looks like a dremel, but if it's powerful enough to use for wood I'll take it :)@@CarvingFusion