Arron your blessed to have such a happy, positive wife in your life. It is so funny to watch these fun filled episodes of you two. We have a Yorkie also. I laugh every day with her. She is our precious little nuisance. All the best.

I have a soft spot in my head for the LUV pickup trucks. My first truck was a 78 Longbed LUV and a 81 Shortbed a few years later. Sadly I was in a accident with the 81 and totalled it out. I really dig the fact you guys are running a diesel in yours.

Are used to do all my front in alignments the old fashion way, with a string. And I could get it more precise than any Machine. but I am new to your show but let me say that you and Aaron are doing a killer job.

Great show! Luv the tools, luv the 🐕, luv the bloopers, luv the POS old diesel getting love. Just great!

How do you only have 60k subs?! The whole automotive world should be tuning in!

As I have mentioned before (All thanks to you guys), I bought a power probe and it's now one of my favorite tools...Much love from Australia keep the videos coming we miss you guys too much :).

We bought our LUV brand new 1977 . I loved driving my little 4L 4-speed truck . It always ran great. We lived in Northern Missouri and due to salted roads it rusted away in less than 7 years! I searched for a replacement body and couldn't find a good one. No internet existed to find one!

Back in the mid 80s my dad used to own a nursery in Marietta GA just outside of Atlanta and he had a first gen luv single headlights with a stretched frame, a 10' flatbed and a dually setup on the back. It also had that Isuzu diesel and a 5 speed. I used to drive the snot out of it and deliver nursery supplies in the summer when I wasn't in high school. I think it had a straight pipe exhaust because it sounded like a bumblebee in a gord when you wound it up tight. Great memories, luved that little truck.

Finley steals the show... Especially when laying down right in front of the camera ! Those Chevy Luv's all rotted away up here long ago... thanks for the memories !

Videos like these are classic! Enjoy them so much. Nothing like a little Luv.🚘

Early 90s my first truck was a 79 Luv 4x4, 1.8L gas, yellow, Mikado trim level (which meant a few stickers). I had so much fun with it but quickly outgrew it by my late teens, as I have been 6'5" ever since.

I honestly don't know how people dont like you guys. You guys are great and even if its throwing an axle in it's still entertaining to watch you guys. Glow plugs are no big deal but still a great 22 minutes of video learning about a chevy luv with a chevette engine that makes no power 😂

I’am happy to see you Yorky is given a spot to watch you work. My Jack Russell always wanted to see what I was doing under the hood of the car but I never thought of making a spot for him. I did how ever pick him up to show him what I was doing and explain the situation to him! He crossed the Rainbow Bridge a few years ago. I still miss Jack!

I love my PowerProbe too! Definitely one of my favorite diagnostic tools.

Some of my first truck experiences were with one of these little Luv trucks. Awesome little rigs, and to see one with a diesel is cool. Good stuff.

Oh thank you so much. I have missed seeing you two working together.

the plaid on your waist wrapped shirt is Awesome !!

Well, it's about time! Sure did miss you guys!

My Dad had a 1977 gas Chevy Luv, That truck was awesome! Lasted 270,000 miles! Awesome channel!!

I had a butterscotch 76 Luv up in Wichita Falls 35 years ago. Ran off the road and hit a rock and bent the steering . Drove it for another 2 months holding onto the steering wheel so it wouldn't pull to the left. Good times !

That would be a neat lil truck to upgrade. Good to see another vlog. love this couple. Get it.

Great Vid guys, Love them old trucks!

Couple goals! I do have a lot of catching up to do. I let my MTOD subscription lapse because it's just too much of a hassle since I uploaded the app on my phone and I couldn't sync up with my amazon prime on my TV. Anyway, love seeing you guys and I appreciate all your efforts to get the content out there. In all media. Keep up the good work.

10:11 - Nothing says "back on track" more than a moth fleeing the engine bay! XD

I do love my Power Probe. Nice explanation of what your testing for on the glow plug.

Love the show cool to see wife and husband work on cars together

Ole Miss you guys videos and now you probably busy but hopefully fees get more for us to show love to work love the tag team job you do on the vehicles please keep it up and keep them coming look forward to seeing them soon

Love that finely chills with you on the engine while you work. Saw many of those little trucks around with v8 stuffed in them growing up.

Hey guys, enjoy the video's. The glow plug warming system is abit different than on my 1980 Kubota ,but still similar. Nice to see the little rascal running well. Long live the little diesel that could!

Cool ride man,love the little pickups.It is a beast,😁🤗Finnley wants to learn too.

You guys are great. Thanks for the info on the tools.

your dog is just too cute to be true. and the way he loves you is also amazing.

Thanks she always brings back a lot of good memories from when I was young and add one from California Stepside same front end I miss that little truck thanks again

luvin the luv project

Dude you hit the jackpot. Knows whats shes doing working on cars. And smoking hott. 😍😍😍 life goals achievied. 👌

Great video Emily I've missed your videos thanks for sharing have a great day

I had a '72 Luv gasser way back in high school, around '82 or '83. Fell out of it on a hard right turn one day cab and all. Made a great trailer from the rest though!

A Chevy Luv haven’t seen one of these here in Australia for years! Slow yes but hey loads of fun Really enjoying your videos

It's great to see on KZfaq again, but please do something with the volume on your videos. I could barely hear you

loll @ 2 minutes of black screen at the end??? great videos! I have ran my little Mitsubishi/Ram 50 diesel truck on used vegetable/fryer oil. Not good for winter (gels) but perfect for summer. Just have to filter it well before adding to the tank! seems to add a little power as well. Free fuel is always cool as long as no harm done to vehicle. I have not had any problems at all. Also exhaust smoke is white when there is any and it smells like whatever was fried in the grease! I am working on 3 more diesel swaps, a Kia Sportage/Mazda turbodiesel, the Mitsubishi swapped into an 84 Bronco II and Isuzu (NPR Truck) Turbodiesel into Dodge 4x4 truck! Love those diesels!

OMG I love the Chevy Luves and wish no I pray I will get to own one myself some day before their all gone. I prefer the gas type more than diesel. My dad has a little dog like yall and her name is Precious and no one can mess with her but dad. I am now a new sub for yall to because of the Luv and hope to see more of it and your other builds.

It's amazing that you two have that connection. You my friend are a lucky, lucky man. My wife loves my projects but I cant get her to help for nothin!!

Looking forward to the new turbo install video, seems like the oil seal in that turbo could be done.

You can also put a ground to the glow plug housing and a hot with the same gauge wire used in the vehicle to glow them up...if they don't obviously they are bad.

Awesome little truck

Been a while Emily and Araon. Nice to see you wearing you wedding rings. At the start. Nice touch. Back at it wrenching again. The happy couple. Good luck with sema. Hope it goes well.😉🤓🤓💑👍👍👌👏

The Luv confirmed it, y’all are a cool couple!

First time watching yalls videos. Liked and subscribed. Great video and content. Y’all seem so genuine and nice. Looking forward to more vids on this luv pickup. Our old neighbor had and 80’s Isuzu diesel truck like this. Mike from Richmond, Va

Awesome!! Love it. Those old Chevy luvs are so awesome!!

COOL! Love the LUV!

You showed the Luv some Love. Way cool. Hope you can show some video from Sema. I'm very happy when you put up new content. Another KZfaqr is building a BMW powered Z. for Sema.👍👍 "B IS FOR BUILD"

That girl is running nitrous. Has to be. Nobody can be that cheery and upbeat.

I remember and I want one. Diesel luv

Emily I love how affectionate you are it’s so cute!! 😭💕

Sound wasn't great..but I muted it and just enjoyed watching you guys having fun. Chevrolet LUV....what a cool name for a rebadged Isuzu KB.

I used to have a Luv just like that....well gas, but same color and style, great truck

Awesome work

Aaron, you are my hero!

Keep up the good work love you guys

Wow, you shot some of this just yesterday - did you get any sleep after editing?! 😉 Great video as always - I actually geeked out on the Quick Trick alignment tool. You’ve convinced me that I need this in my garage. 👍🏻

Do I see a white XJ in your back yard? Edit: Oops. It's the Wagoneer. Silly me. Love how Findley sits with you all the time. Had a Luv in the late 80s. Definately one of the top 3 cars I want back. Keep up the great work.🤙

55 HP?!!...my Luv Mikado (same color!) made around 375 HP. 'Course that was because one of the guys at the city garage hoisted the cab and box off and replaced the 1.8 L Isuzu with the entire 455 Ponch Super Duty drivetrain out of a Gran Safari wagon with a towing package. It was nasty rusty, but ran like a scalded cat til it got scary and I'd lift to live! Bought it for $250, dug it out of a huge snowdrift, aired up the tires and drove it home. It left "dualie" tracks due to the fact that the wagon's rear end had better than a foot wider track than the stock front. Kept it for a year and parted it out for $600. Lived to type the tale!

That luv ROCKS..

Power probes rock! Also, what in the world happened to that F-bomb shirt? Fight a lawn mower? That is a collectors item!

Little truck sounds good

Funny you wired you glow plugs that way, I did the exact same thing to my 6.2 NA diesel in my 86' K5 Blazer after my glow plug controller board went out. It has the advantage of removing the one and only circuit board in the entire vehicle. Oh and a tip on the glow plugs, put antisieze on the threads when u put the new ones in bc a broken one is a SERIOUS PITA to get out.

I have to say it, again, LUCKY MAN!!!

Problem with doing this sort of align is you need turntables. Two sheets of 1/8 plate with plenty of grease between will suffice. Though still need s to bounced or at least rocked back and forth.

Rare Truck and a Thumbs up liked.

This was definitely a cool one guys! What years did the Luv get diesel? Grandpa had a gasser and it was awesome. Would Luv to find one if I could.

Best vids and fab little dog ever .xx

always fun to watch, but i just love (luv?) the dog bed when you are working on the engine... :P

Cool! Fun!

1.8L you say? Used to get a chunk more than 55bhp out of the 1.5 isuzu td lumps over here in the UK, when they were popular in Vauxhall/Opel Nova's, Corsa's, ran happily at 75-80bhp. Oh, voice volume seemed quite low, had to keep turning it up as the video went on, weird as the setting at the start was a little loud on the video I watched just before.

i think your videos are cool wish i had the work area you all do instead of a carport with gravel floor to work on my 53 ford two door mild custom very hard to raise the car so it is safe

While watching y’all work on Luv I was wondering how many times y’all head butted Zen’s tires. Then you nearly walked into it!

Love the Luv 🔥🔥🔥🔥

Cool thank you

Keep it up guys love the vids.... side note: audio is very quiet... maybe double it if you have that option

You two are Awesome!! So glad I found your channel! ;-)

Nice video, question tho why is the truck named LUV??

**I LOVE these TWO**

Killer truck, where did you find the motor, can't wait to see it with the right turbo setup

Nice F-Bomb shirt, Em!

If anything needed an LS swap, it would be this. Now that would be real LUV.

I have a 86 S10 4x4 standard been a project for a awihle has 2.8 v6 not a lote of hp but torky . Like to do a engine swap 4.3 v6 maybe but with trans and transfer case. Hard to get anything to adapt

sounds like the glow plugs had power left on and caused them to fail....maybe a timer isn't such a bad idea Aaron.

My first thought was fresh gas would clear up the smoke, then I thought again. lol Can't beat the MPG's

I have a 1982 s10 that we put a imark diesel in, when I was in high school. I’m getting ready to get it back out. Was the turbo worth it?

Hi, just keep on making videos...thanks

I thought Johnny had a beer in his hand until you pointed it out.

I have the same front on my 76. But I have a sport bed. If you have a connection to someone who can recreate them I will volunteer mine as molds. In exchange fer a set or 2.

I just got off the fone (phone) with quicktrick . I have a new to me motorcoach (FMC 2900R) #458 out of 1000 made. I called the front end alignment guy here (spokane) got a quote. Then called your guy (quicktrick) to buy their tool. WOW are they proud of the of their stuff........ I take my FMC motorcoach in wed. and save a lot of $$$$. Keep up the blogs, Ive enjoyed them all. Jim Fortymile

the toe-in setting is meant to provide stable straight line driving. Dead straight and even worse, toe-out will make the car steer twitchy and nervous.

Sadly, Power Probe went out of business. I do love my Power Probe II, though...

Luv those old environmental friendly cars, don’t make them like they used to... or... something... 😬

I put 200,000 miles on my 79 LUV but it finally rusted away, sad.

I am wondering how you avoid being bruised all to hell from working and banging around in and under the car. I would be a mess and would not be able to do the modeling. Of course, I am old and fat so it really is a non-issue for me. love the show.

Love a Chick that knows to work on Cars

Another great dorky episode.