Diesel-Powered Hydraulic Power Pack i made

Рет қаралды 269,438

Күн бұрын

This is a Diesel powered hydraulic power pack i started to build back in 2017.
Doing some finishing fixes and testing it.
English subtitle available
00:00 Introduction and Overview of the Build
01:42 Pressure Washing the Machine
02:16 Removing the Maneuver Panel
03:27 Starting the Machine
04:33 Constructing a Holder for the Start Panel
11:15 Installing an Hour Meter
15:55 Attaching the Console
17:03 Changing the Stub Axle
20:24 Replacing the Drain Line Coupling
21:30 Performing Service on the Diesel Engine
25:01 Building a Support Leg for the Trailer
31:25 trailing it with a Car
32:21Testing the Power Pack with my Wood Processor
36:20 Fluctuating Diesel Engine
38:05 Removing the Injector Pump
38:42 Detaching the Fuel Hose
39:00 Troubleshooting
40:43 Crimping Tube onto the Fuel Hose
41:29 Replacing the Injector Pump
43:17 Taking the Machine to the Forest for Testing
44:16 Testing the Rock Crusher Vibrator
47:18 Installing a Throttle
50:53 Installing Proper Connector on the Drainage Line
51:19 Summary
51:45 Pictures from the Machine's Construction
53:25 Drone Pan Out (Closing Shot)

Пікірлер: 213

@rickerb7196 8 ай бұрын

You are about the most professionally looking outcome fabricator I've seen in 73 years!! Well done!

@mikeg3893 4 ай бұрын

Except for not wearing safety glasses while using a hole saw and getting his jacket so close to the hole saw!!

@bobsimony9178 8 ай бұрын

For a guy who says he is not much of a planner - it looks like you always have a plan! Enjoy watching you create and I like the countryside.

@DMSparky 10 ай бұрын

Always enjoyable to watch a talented fabricator work.

@chuckjames1943 10 ай бұрын

This is a great looking power pack. Made up of very good components. It will serve you well for years.

@jonnafry 10 ай бұрын

Cool porta-power unit ... especially when towable by the quad. Very enjoyable 53 minutes and 50 seconds ... cheers.

@M.BJOERNSTROEM 10 ай бұрын

Thanks for watching!

@jamesoliver6625 10 ай бұрын

Frame the entire trailer in square tube and then panel the four sides with hinged panels that will fold 270º to lay on the top for maintenance access/weather protection. The side panels may need to hinge in the middle so they both can be opened at once. Just a thought.

@andythorne1261 10 ай бұрын

that's a very useful as there are many types of hydraulic tools and equipment you can run from that

@user-qv7in9fw3j 10 ай бұрын

Nice job as always. From a simple design to a master piece.

@tantalus8991 10 ай бұрын

I was hoping to see an attempt to draw a turtle and hare for the throttle! LOL. Great job as always!

@M.BJOERNSTROEM 10 ай бұрын

Drawing is not my thing, i would probably just confuse myself in the future..

@quietbrianquiet 10 ай бұрын

Thank you for the great camera shot as always. The drone shots are beautiful. You can get diesel algae treatment and add it to the fuel of a unit that is sitting for a long time. That looked like algae to me. Thank You.

@M.BJOERNSTROEM 10 ай бұрын

Thanks, will look into that!

@andrewcooper8980 10 ай бұрын

This another great idea you’ve had. If it saves the pump on your skid steer and any other equipment makes total sense

@wirenut003 10 ай бұрын

Very good use of old, not needed equipment for use as a multi-use machine.

@carlf8291 10 ай бұрын

Love to see the rock crusher working in a video.

@ritchieblackmore5204 10 ай бұрын

Hi loving your videos, I see you changed the oil and fuel filters on my birthday 👍🏴󠁧󠁢󠁥󠁮󠁧󠁿🇬🇧

@mykalmcb 10 ай бұрын

THat engine fire right off after sitting for 5+ years.

@Dust.. 10 ай бұрын

Thats a diesel for ya mate

@wills5482 10 ай бұрын

No carbs to clog and no gasoline to become varnish

@Dust.. 10 ай бұрын

@@wills5482 exactly right

@bolla1369 10 ай бұрын

Avrai dei problemi con il sistema dell'iniezione con quel tipo di motore, motore Lombardini FOX iniettori pompanti, hanno anche problemi sulla cinghia di distribuzione e pompa acqua, non per niente quel motore ha contribuito al 80% a mettere in crisi l'azienda e vendendola alla kohler.

@Ricko65 9 ай бұрын

I just subscribed to your channel - I did this because your workmanship and craftmanship are fantastic!!! Thank you for the AWESOME content.

@SANTANNA007 10 ай бұрын

Brother What a sensational video you doing this job as a MECHANIC and inventing some adaptations, by the way I am a mechanic here in Brazil and I like it a lot too, and this wood cutting machine is too top, the danger and you putting your hand in when it is going to split the wood , be very careful about that ae ....

@ErikSkov-um2jv 10 ай бұрын

You never see a problem, only solutions, nice job

@b.malnit8983 10 ай бұрын

I like how you overbuild everything..

@everestyeti 10 ай бұрын

Another brilliant idea, have you thought about adding a generator output so that if needed you have a power source aswell? Obviously I don't have a clue how to do it myself but am sure it's something you can do. 👍🤗

@M.BJOERNSTROEM 10 ай бұрын

Been thinking about putting a generator and a air compressor, so i can use it as a service wagon.

@DanKoning777 8 ай бұрын

I sure it's not easy, but I wish you created more videos. I just found your channel and immediately subscribed, but I'm already getting close to having watched everything. It's also not easy finding great videos like this-those w/o a cuss word every 2 mins. or head banging metal music. God bless.

@Thisguyisthelimit 10 ай бұрын

This is realy enjoyable to see. The way you get everything to work and function the right way. It feels bad (in some way) to call you for beeing a backyardengineer thus because your very professional way to get everything together. I like your way of thinking. Things you do seem to work better than just good. A little development process in some areas will be needed maybe but some stuff has to be seen working before that happens. My favourite machine of yours is the firewoodplant. Many functions in one machine. Tack för fina videos.

@kellygb9278 5 ай бұрын

To say that I am impressed would be an understatement! - Well done on all fronts

@Timothy-lb2vr 10 ай бұрын

That is a mighty big vise you have there!!!

@Larry-325 10 ай бұрын

Nice video. Great portable unit to have. Nice job!👍👍👍

@M.BJOERNSTROEM 10 ай бұрын

Thanks!

@ShaneCDixon 10 ай бұрын

Very cool project with a multitude of uses!

@pieter-van-loon 6 ай бұрын

This guy is (becoming) a legend! Fantastic youtube channel

@BarnStangz 6 ай бұрын

Always enjoy your content! I can't believe that I forgot to watch this one! I like how meticulous you are with things. Never any shortcuts, it's nice to see. Like the music too.

@dennisal1481 10 ай бұрын

Hi, i want to give a tip about the engine. Let it heat up before you ref it up. Otherwise it will have a short live. And i would place a valve under the diesel tank. So you can close it. Nice video though thanks.

@M.BJOERNSTROEM 10 ай бұрын

Hi, it is heated up before revving, i just edit that out. Thanks!

@newzealandfromadjimini2cor452 9 ай бұрын

Your videos are very enjoyable to watch. Thanks 😊

@raytalbot5890 9 ай бұрын

Stripping the two machines down would have been a good video 👍👍🇬🇧🇬🇧

@hollandduck79 10 ай бұрын

Hello from the Netherlands . a nice pomp trailer project 👍 . maybe also make a special trailer for the wood splitter to put it on if you don't work with it on the skid steer loader . thanks for the video M . Sincerely Hollandduck

@TheVitorgoncalves 10 ай бұрын

Comgratulations .....you are the NEW MacGyver of the Millennium ....good job...

@bobfugazy4916 6 ай бұрын

Nice work. Beautiful aerial photography of Norway, Sweden, Finland? Keep up the good work.

@leonvdm 9 ай бұрын

for that fuel line: inside that crimp fitting is a tailpiece, a new (or shortened) hose with a regular hoseclamps can be clamped onto that. next time ;)

@jondavidmcnabb 10 ай бұрын

Love watching you work. Maybe make a cover out of cheap aluminum channel and corrugated plastic sheet??

@andrewrobinson2869 10 ай бұрын

Great video, keep them coming , thank you .

@keithsilva6330 7 ай бұрын

Nice show with awesome content... Film-maker, Truck-driver, Shop-Tech,, Equipt Design Engineer, Land owner, Powder monkey, Contractor to name a few.. Thats alot of hats. All presented by a guy who comes across 😎and Low-key... 👍🙌

@greatstomp 10 ай бұрын

Yay! Finally some rockcrushing video comming up 🥳

@niklasadams30 10 ай бұрын

Thank you for your Videos,keep going !

@M.BJOERNSTROEM 10 ай бұрын

Thank you, will do!

@InquisitiveBaldMan 10 ай бұрын

Get an old leather sofa and make a cover from the leather. Its light to take off when in use then.

@SM-98 10 ай бұрын

Very nice video, thanks for sharing!

@horstszibulski19 9 ай бұрын

Sounds like the diesel is running into the rev limiter, maybe some small adjustments on the injection pump could help with that. For the cover I would try ro get a canyas/tarp like one on the small trailers, doesn't weigh too much and keeps the power pack nice and dry, as long as it's standing on the job site... Thx for showing, great to watch! 👍👍👍

@kitecattestecke2303 10 ай бұрын

Maybe add some cheap fenders and lights? Much safer if ever used in the road and not slinging stones 360° 😅 Gold project ❤

@ranchorelaxo2287 10 ай бұрын

Good job buddy. Might I suggest laying down a piece of cardboard for your next oil change? It is much easier to slide the catch pan and cleaning up is generally easier also. I spill less oil this way. Be well.

@DMSparky 10 ай бұрын

You should get a cover for the area at the front of the trailer. Cover the valves and dashboard thing.

@jimDseries 10 ай бұрын

Thanks for this latest video. Can you please show us when you start crushing those rocks.

@M.BJOERNSTROEM 10 ай бұрын

I will do that

@mickyfitzko6024 8 ай бұрын

Just found your channel and im watching your videos and now im subscribed. cant wait to see more videos!

@loczek1990 10 ай бұрын

Great Job!

@micharoman9188 10 ай бұрын

U R clever and Smart guy. I admire.

@dickdavidson3616 10 ай бұрын

One handy dude!❤

@gingerinventor110 10 ай бұрын

If the big pump has 'pressure compensated control' you could add the smaller pump on the same circuit to increase the flow. You may need a check valve on the big pump pressure line.

@TheGazmurphy 10 ай бұрын

Very handy

@WiggglezMr 10 ай бұрын

A touch of CA glue really helps keep electrical tape from unraveling later.

@lebotnov66 10 ай бұрын

actually, if he used "Solder Sticks" he wouldn't need the tape and the joint is more secure.

@WiggglezMr 10 ай бұрын

@@lebotnov66 i also like those solder heat shrink combos, those things are great.

@Boise30 5 ай бұрын

Yeah, I was surprised he didn’t use a weather pack connector honestly. Electrical tapes is a temporary tool like zip ties.

@barttraynor1220 10 ай бұрын

Very nice 👌

@user-un2ni8dl7y 8 ай бұрын

Good work 👍

@teapot_ 10 ай бұрын

Well, although the top for it you made is heavy, it will be good protection from rocks when loading the crusher, and general elements. Perhaps try it and see.i know it takes time to film everything but its obviously worthwhile and there are a great deal of people like me that really appreciate what you do...thanks.

@EuroWarsOrg 10 ай бұрын

Great work back in 2017! You should have done a voice over of the pics from then, in the start of the video.

@marriagepartnersministry5942 3 ай бұрын

When I think of all the money spent on machinery, fuel, wear and tear, then I think of all the time spent to cut wood, build machines, service machines, process into firewood, haul the wood, load fireburner constantly, it makes me wonder if there was any savings on the fuel bill in comparison. It might be kind of mildly enjoyable to work on stuff but I would rather get the house heated with no effort and spend my free time doing something GREATLY enjoyable like fishing, hunting, snowmobiling, and the like. I'm not disparaging this guy at all, what he does is very impressive.

@Jonas.mf399 10 ай бұрын

Nice vid❤

@trashanken 10 ай бұрын

The rock crushing part will be very interesting! Will you be sweden's Andrew Camarata now? ;-)

@eby6114 8 ай бұрын

Our diesel over here is yellow. Yours is clear.

@BigEightiesNewWave Ай бұрын

Love watching Swedes do Swede things. PS, I am a hockey player : )

@sydneymcconnaughhay5947 8 ай бұрын

Wow great vid...😊

@talalalnajdawi Ай бұрын

good work go on

@JH-lo9ut 8 ай бұрын

Look for one of those fiberglass hoods that go on covered trailers. Maybe you can get one of those to fit. Seeing your wood cutter/splitter it struck me that the lengt of push/ pull is twice the length of the log stumps. This could be improved. Maybe just let one stump push the next stump onto the wedge.

@gliOrtidiMauro 10 ай бұрын

è bello vedere come lavori, per conto mio i video li puoi fare anche di due ore... senza le parti accelerate, sei bravo e attrezzato. complimenti. ciao

@joroyle8108 8 ай бұрын

Lovely old job

@TBizzell68 9 ай бұрын

Nice! That’s a handy rig. It sounds like the engine is bouncing off of the governor.

@boothienz8021 9 ай бұрын

Might need a stronger spring, there are differences between car engines and stationery ones

@arjanvogel6444 10 ай бұрын

Thanks for your vid 😇💟💟💟 Love and bless you, you forget to look at the air filter. To bad you never show you read the comments maybe leave some hearts here and there.

@adiifyr1adii615 10 ай бұрын

Kjempegod video du har laga glede meg til neste video

@Bjorn1976 9 ай бұрын

Du lager jo ting akkurat og bedre enn fabrikk 👍 Konge

@mrentremattor5772 10 ай бұрын

Nice.

@william6526 6 ай бұрын

Next you need to build an adjustable stand for the conveyor on your crusher and move that car.

@7eis 10 ай бұрын

At the regular fuel station pumps in Sweden you get 30% biodiesel. If you have access to a buying 'real' diesel that'll probably save you a headache or two in the long run

@kwinterburn 10 ай бұрын

Just watched the video , and thought your only cost is diesel , but you have tons and tons of wood waste , it may be worth for a static application like this , making a wood gasifier and running a gas engine on wood gas , you would need to scrub the gas through woodchips to clean the creosote , then a standard petrol engine, either that or a steam engine ideal if you have a use for waste heat is drying wood or heating a house

@gerhardii 15 күн бұрын

I would add a safety pin lock for the front stand to ensure it does not slip down onto the road while pulling it,!!!!

@raytalbot5890 9 ай бұрын

To stop wiggle you could put rubber between black key unit & red bar ?? 👍👍🇬🇧🇬🇧

@user-iy1xq4jw6o 10 ай бұрын

太棒了

@PaulHigginbothamSr 6 ай бұрын

Your diesel seems very watery compared to ours. Looks like Rudolf came to visit.

@Boise30 5 ай бұрын

Love your videos mate. I see you using the double flex head sockets a lot, I’m realizing they must be quite handy, easier than grabbing a socket and wrench. I worked on the clipboard side of diesel truck repair and never saw techs use those- kinda curious why not after seeing you use them. What brand are you using and have they held up well?

@Max_Marz 10 ай бұрын

Have you been happy with that Can-AM ATV? I was gonna get that same model until I saw how much of a nightmare basic services are on it. You gotta take a bunch of plastics off to change the oil right?

@chrissycastro9476 2 ай бұрын

You should make the spliter into a quad.

@giorgiogiovannini6308 7 ай бұрын

grande!!!

@Farm_fab 9 ай бұрын

The broken trailer hub could be used along with the spindle to hold your spare tire. It wouldn't need all the bolts to hold the spare.

@mateuszcelmer6180 10 ай бұрын

at 8:58, who makes that wrench you’re using? never seen one quite like that!

@molitovv 9 ай бұрын

OEM Oil filter... OOOOhhhh yeah

@PaulHigginbothamSr 6 ай бұрын

So Hanna pulled the car away frozen to the ground? Living in the Arctic circle makes life so easy. How is your car used for a belt support doing? I see you put a steel backstop for it but the rear window seemed broken. Then pulled it out with a strap through the wheel. Easy to move things with a big excavator. My neighbor got stuck in a snowbank down off Parkhill street. He could have used your excavator but he diddled around with it and got it out. 21:50.

@Spawn303 10 ай бұрын

Weld two perpendicular blades so it cuts into 4?

@jennyschlabber7306 8 ай бұрын

I would simply clean the rusted hood, paint it with rust converter, paint the surface and the hood is ready for use

@chrisbubar6604 9 ай бұрын

You have a lot of equipment. I really enjoy your videos. How can you afford it all? What is your secret ha ha.

@KEYSTONELIGHT69 4 ай бұрын

REALLY LIKE YOUR VIDEOS. WHAT KIND OF VISE IS THE ONE YOU USED TO MAKE YOUR BATTERY BRACKET FOR YOUR COMPRESSOR??

@TyFreeborn 9 ай бұрын

I'm wondering, were you running your wood splitter before off the Takauchi's high-flow (124.9 Lpm) secondary auxiliary circuit hydraulics instead of the slower primary circuit ( only 69.5 Lpm)? If so, maybe you could add a high-flow pump to your new service trailer to boost wood production. Thanks for the awesome content! I've subscribed.

@M.BJOERNSTROEM 9 ай бұрын

I did use it on high flow with the skid steer, and for the trailer i could connect the 2 gear pumps to reach a higher flow if using this for that. Thanks!

@carrerobert8976 6 ай бұрын

👍 super boulo mec

@patrikpersson9446 10 ай бұрын

Perhaps it is a built in constant rpm regulator inside the dieselpump thats mocking ??? It sounds like it has taken in a smidge of air in the dieselsystem when you start it up??? A bit ruff at first..

@M.BJOERNSTROEM 10 ай бұрын

Could be!

@barthanes1 10 ай бұрын

Mount a manual/powered hydraulic lift for the cover. It's a really nice cover. It would be a shame for it to go to waste.

@kristerolsson1795 10 ай бұрын

Vad har du gjort med takstegen? Tack för en bra film.

@M.BJOERNSTROEM 10 ай бұрын

Inte den blekaste

@robertmintz63 7 ай бұрын

The amount of crude in that old pump was terrible, Horrible fuel, I would suggest you run a purge treatment of inj cleaner then continue with maintenance level . If you ever have any starting problem , instead of either starting fluid use WD 40 sprayed directly into the intake manifold after the air cleaner . Overall good machine you have built great idea , keep up the good work