FREE YANMAR DIESEL ENGINE SAVED FROM THE SCRAP YARD...WILL IT RUN?

Рет қаралды 163,940

4 ай бұрын

IN THIS VIDEO WE SAVE A TWIN CYLINDER YANMAR 2TNV70 DIESEL ENGINE AND A PEERLESS HYDROSTATIC TRANSAXLE FROM A SCRAPYARD THAT WAS GOING TO BE CRUSHED AND MELTED DOWN. THIS ENGINE IS THE SAME ENGINE THAT IS IN MY IHI MINI EXCAVATOR AND THE TRANSAXLE IS THE SAME THAT IS IN MY STIENER 430 MAX TRACTOR!! I GOT BOTH OF THESE FOR BASICALLY FREE, JUST TRADED SOME SCRAP METAL FOR THEM, WHAT A SCORE!!
Buy me a coffee if you enjoyed this video and want to help support the channel 🙂: www.buymeacoffee.com/albericidav
MY EMAIL---- ALBERICI.DARRELL@GMAIL.COM
Link to the fuel line I use- www.ebay.com/itm/132451641452...
AstroAI Car Jump Starter, 2000A
Product Link：Amazon：bit.ly/45TyJ7f Website：bit.ly/3S3UZqe #AstroAI #jumpstarter #astroaijumpstarter

Пікірлер: 346

@TheHomePros6221 4 ай бұрын

Its crazy what people throw away nowadays!! There is a lot of life left in this engine! With A fresh paint job it will be perfect to repower somthing..There was other tractor related stuff in the pile as well maybe I should have went through it all better 🤷. Thanks for watching guys!!

@enduser1982 4 ай бұрын

Are we going to get 4k???

@TheHomePros6221 4 ай бұрын

@@enduser1982 4K video?

@enduser1982 4 ай бұрын

@@TheHomePros6221 yeh as in 2160p?? It's currently 1080p! Quality is quality and you should want your work shown in it's best quality.

@wmweekendwarrior1166 3 ай бұрын

Good stuff

@pieterbezuidenhout2741 3 ай бұрын

@@TheHomePros6221Subscribed as I'm 71 years old and love to 'Pickup ' throne away engines at Scrap yards. Apparently there are a lot of either Rich Dumbasses or plainly STUPID people out there but my thanks goes out to all of them. Picked up similar situation on a Diesel Light Truck engine and spent ZERO but new oil & filters on it , put in the truck and stil driving it.

@Fawteen 4 ай бұрын

You are my hero! My wife hates when I take stuff to the scrap yard because I usually come back with more than I left with...

@TheHomePros6221 4 ай бұрын

Hahah I’m the same way lol esp at this private run scrap yard I just started going to, there’s lots of cool stuff there

@P.Trim69 3 ай бұрын

Ten four every thing nice when ur poor

@rallyscoot 3 ай бұрын

Or its was just a good trade.

@donfoster5576 2 ай бұрын

Going to the dump is like going to the bank ---- make a deposit, make a withdrawal.

@3sparewashers-lg3gf 4 ай бұрын

WOW! And to think they were gonna melt that down. Yanmar makes one helluva motor.

@TheHomePros6221 4 ай бұрын

They sure do!! I think they are the best along with deutz and then prob kubota

@3sparewashers-lg3gf 4 ай бұрын

@@TheHomePros6221 IMO, the toughest engine ever made is a two stroke detroit, followed by Ford's tractor engines and an 855 cummins. Kubota and Yanmar are certainly the best in the sub 30 horse market.

@JohnSmith-yv6eq 3 ай бұрын

Have you ever seen the small (sub 20hp) Lister or Petter diesels? @@3sparewashers-lg3gf

@Kiltylake 4 ай бұрын

Nice! I love getting old engines back up and running!

@TheHomePros6221 4 ай бұрын

Yes sir it’s a great feeling!

@Fritzie73 4 ай бұрын

Just love your little pup too! I had a little guy just like him, he was a rescue and I just adored him. 😢

@TheHomePros6221 4 ай бұрын

Aww thank you!! He’s my best lil pal

@hrc5534 4 ай бұрын

Another treasure from your favorite place, the junkyard. This just shows what a great benefit it is to know how things work and how to fix them. A very nice engine for free. Such fun to watch.

@TheHomePros6221 4 ай бұрын

Glad you enjoyed it!!😊

@Spitter-ud8jd 4 ай бұрын

Gotta look at the bright side you might have sprayed oil everywhere but you won't have to worry about the skeeters in the spring.🍻

@TheHomePros6221 4 ай бұрын

Hahaha

@AlwaysBored123 3 ай бұрын

Can't beat that. Love it when you find something useful in a scrapyard.

@TheHomePros6221 3 ай бұрын

You got that right!

@AW-Services 4 ай бұрын

Brilliant video. It's always a great feeling when you find a small engine and you can get it running

@TheHomePros6221 4 ай бұрын

It sure is!😊😊

@Fritzie73 4 ай бұрын

Lol I just LOVE watching your videos!!! You are a Great Mechanic!! So much respect! ❤❤

@TheHomePros6221 4 ай бұрын

Thank you so much 🤗 that means a lot!!

@benwinstanley101 Күн бұрын

I wish I was your friend to pass tools refreshments n jokes would learn so much . Great work chief from Portugal

@jamesadams1064 4 ай бұрын

As always great work. Always look forward to your videos.

@TheHomePros6221 4 ай бұрын

I appreciate that thank you my friend!

@lottiecooper609 4 ай бұрын

Maybe that motor spent a little time upside down? Just a guess. As always, well worth the wait for one of your vids!!! Thanks for sharing bro!!!

@TheHomePros6221 4 ай бұрын

Yes I think so as well. Thank you very much my friend!!

@robertcoulthard2746 4 ай бұрын

Mr Home Pro, really glad you saved that engine from the furnace , where as the scrap metal,not much use is now being recycled into something of use , WIN,WIN outcome. Great work, regards Rob.

@TheHomePros6221 3 ай бұрын

thank you so much rob

@Ants_Pants 4 ай бұрын

good job man. You are a fantastic engineer

@TheHomePros6221 4 ай бұрын

Oh and you are very much as well my friend!!

@Melicoy 4 ай бұрын

SAVED means it will run! I Love how you clean it first most guys are scared. Thanks Also looked like shaft was bent.

@TheHomePros6221 4 ай бұрын

Thanks 👍 the shaft is straight someone welded some goofy pulley contraption to it

@scottmyers226 4 ай бұрын

That was awesome. You have skills my friend.

@TheHomePros6221 4 ай бұрын

Thank you very much!

@tubeDude48 4 ай бұрын

Nice pick! Got a winner. 👍

@TheHomePros6221 4 ай бұрын

I can’t beleive someone threw this thing out!!

@JerryWilliams-lf3hh 4 ай бұрын

💗it. No need to put it back in the scrapyard.

@TheHomePros6221 4 ай бұрын

Why would anyone throw it away in the first place?? 🤷

@jeffwilliams2031 4 ай бұрын

That's really awesome Darrell. Great finds. Also a great video. Thanks for bringing us along. Can't wait to see what is next. I never miss one of your awesome videos.

@TheHomePros6221 4 ай бұрын

That means so much jeff!! I truly appreciate viewers like you!! I wouldn’t be making these videos as they take a ton of work, without support from viewers such as yourself! I have a good buisness (the home pros) fixing up houses but I have pretty much stopped doing that to make this my full time job

@jeffwilliams2031 4 ай бұрын

@@TheHomePros6221 I am so happy to hear you say that because I always thought that you could make a career out of making videos. You are so awesome at fixing things that most people , including me, would just throw away. That's why I love your channel so much. You seam so intelligent for such a young man. I wish all the best for you and hope to see a ton of videos from you. I freaking love them. Keep going my friend.

@billlloyd9142 4 ай бұрын

Good fines Darrell, amazing what people throw away.

@TheHomePros6221 4 ай бұрын

sure is my friend!

@donnydenfeld2394 4 ай бұрын

What a great find.

@TheHomePros6221 4 ай бұрын

Thank you! I think so as well

@danw1955 4 ай бұрын

Wow! I'm impressed how easily that little diesel started after you got fuel to it.😄 I didn't realize how tiny it is, until I saw your hands around the intake and such, yet they're rated at 14.1 hp.?! That would be nice to repurpose into an old riding mower or a boat of some sort!😉 I don't imagine the fuel shut off solenoid would be terribly expensive?

@TheHomePros6221 4 ай бұрын

You and me both!! It started rite up!! It’s only two cylinders but this thing has a ton of torque and it is very heavy I hurt my back trying to lift it with another guy I’m guessing it’s around 250-300 pounds?

@hillbilly4christ638 3 ай бұрын

This would be nice for a generator. You could change the ratio on the pulleys so the motor runs at low speed. Diesels make lots of torque at low rpm, so 1200 rpm would be good as long as your generator is making the appropriate voltage. These little diesels just sip the fuel. Nice motor.

@dans_Learning_Curve 4 ай бұрын

Nice presentation! As a new video creator, I understand the amount of effort these videos require!

@TheHomePros6221 4 ай бұрын

Thank you very much! it sure does!!

@Ants_Pants 4 ай бұрын

my hero

@TheHomePros6221 4 ай бұрын

Hahahahaha😂

@3sparewashers-lg3gf 4 ай бұрын

Another famous face showing up! Love both your channels

@freedommowers420 4 ай бұрын

Always look forward to your uploads brother. Looks like you have an excellent transplant for other projects. What a smooth runner with a little cleaning up. It was spotless under the valve cover. Hope things are good your way!!!

@TheHomePros6221 4 ай бұрын

Thank you very much Alex!! I always like watching your videos as well I hope you do a video or a short opening up that kawasaki engine to see the carnage 😁 thanks for watching brother!!

@freedommowers420 4 ай бұрын

@@TheHomePros6221 thank you. I’ll be doing a full video on the tear down and hopefully rebuild.

@craigdreisbach5956 4 ай бұрын

When I saw your Silverado, I did a double take...yours looks mint....mine is rusty and crusty. Kind Regards. Craig

@TheHomePros6221 4 ай бұрын

It’s been a very good truck!! No rust at all😊

@Farrich9 2 ай бұрын

ในประเทศไทย เรานิยมใช้กันมาก โดยเฉพาะทางภาคใต้ เกาะภูเก็ต หลีเป๊ะ กระบี่ ใช้เครื่องยันมาร์3 สูบ เพราะดูแลรักษาง่าย ไม่จุกจิก แถมทนอีกต่างหาก😊

@carloskawasaki656 4 ай бұрын

Thank you for sharing, I learn a lot 👍👍👍👍

@TheHomePros6221 4 ай бұрын

Glad to hear that

@JohnSmith-yv6eq 3 ай бұрын

Tie the engine down onto some 4x2 or larger timber beams........ Always secure fuel line before starting engines. Always turn over "new" engines by hand before applying an electric starter...

@TheHomePros6221 3 ай бұрын

gotcha I pretty much did all that 😊

@billbly1691 4 ай бұрын

Love your channel

@TheHomePros6221 4 ай бұрын

Love my viewers! ❤️

@a.dudeman7715 3 ай бұрын

Yanmar put these engines in EVERYTHING. Seriously. My family owns a John Deere 650, bought in the 80's, that has one of these. Not the most powerful, but has survived for many, many years cutting multiple acres of land at full throttle. Just can't kill these things.

@TheHomePros6221 3 ай бұрын

u got that Roy they are tough lil buggers

@jakejones9502 4 ай бұрын

Great find.

@TheHomePros6221 3 ай бұрын

😊👍

@skip7243 3 ай бұрын

Nothing better than free stuff to make work again! You made a great haul alos with the transaxle,

@TheHomePros6221 3 ай бұрын

You got that right! thank you!

@kendalwilliam3980 3 ай бұрын

Man!! You can’t beat that brother!! That’s PHENOMENAL!! I bet to replace that engine it would run you at the very least a couple or 2 to $ 3000 wouldn’t you think so? Also you possess some very competent/skillful and or valuable content! I among others greatly appreciate you!!

@TheHomePros6221 3 ай бұрын

Thank you so much brother I truly appreciate that.. means a lot 🙂

@danamace6540 4 ай бұрын

runs clean no smoke :)

@TheHomePros6221 3 ай бұрын

yes sir

@calebcollier6957 4 ай бұрын

i enjoy watching you videos glad you got the old diesel engine running and i like you little puppy too glad you was able to put that on youtube job will done

@TheHomePros6221 4 ай бұрын

aw thank you! he’s my lil pal he goes pretty much everywere I go 😊

@coryboyd7958 4 ай бұрын

Love watching you work on stuff!

@TheHomePros6221 4 ай бұрын

I appreciate that!

@user-ni7tg5fg9k 4 ай бұрын

good runaway vid cannidate

@TheHomePros6221 4 ай бұрын

it almost ran on the oil that was in the cylinder but it hydrolocked instead but it did puff out some smoke, however it’s kinda hard for a non turbo engine to run away

@bartspeggys 4 ай бұрын

Nice content again 👌👍

@TheHomePros6221 4 ай бұрын

Glad you think so! Thank you very much!

@DelticEngine 3 ай бұрын

What a fascinating little engine! I'm thinking one that small would be interesting in a motorcycle.

@TheHomePros6221 3 ай бұрын

Sure would but would need a transmission

@frios011 3 ай бұрын

Boy, you’ve got a way with engines! Very impressive!

@TheHomePros6221 3 ай бұрын

thank you!!

@theradioweyr 3 ай бұрын

Subscribed. This engine seems to have been scraped possibly due to an operator error that trashed the donating machine as the core of this engine seems to be almost pristine. What an awesome find. I am converting everything to diesel and collect them whenever I can.

@TheHomePros6221 3 ай бұрын

Thank you so much!! Considering all the other stuff that was in the same pile it looked like someone Mayr have cleaned out a old shed maybe cause they bought some property and all this stuff was left in it

@jeffreycalabro6495 4 ай бұрын

So good to see you back making videos like what you do

@TheHomePros6221 4 ай бұрын

I appreciate that! I try it just takes along time to make some of these videos I have like 3 projects I’m recording now just finished one but the editing takes forever

@kevincollins7911 3 ай бұрын

Love your videos i have an old yazoo 76” and can’t find blades and a ransoms 60” 3 wheeler both with old kohler 25 hp both still run wanting to recon them. I will keep watching you until you work on one like those😂👍

@TheHomePros6221 3 ай бұрын

Did you see the ransomes videos I put out?

@CathyInBlue 3 ай бұрын

Get a hydraulic pump to match between those two, with a proportioning valve, and then you're just a go-cart chassis away from a yard run-about.

@TheHomePros6221 3 ай бұрын

Yes that would be sweet!

@Castleknight 4 ай бұрын

Way cool, seeing you save that motor!

@TheHomePros6221 4 ай бұрын

thank you brother

@barrypurves4524 3 ай бұрын

when suspecting a flooded cylinder (oil or coolant),I remove valve cover and over tighten intake and exhaust valve valve adjusters by .010-.120 them crank the liqud can now escape. Reset to proper clearance prior to start attempt.

@TheHomePros6221 3 ай бұрын

Great tip!

@markduncan6690 3 ай бұрын

Well Done Sir! So Interesting to watch!

@TheHomePros6221 3 ай бұрын

Glad you enjoyed it!

@nigelbeaumont1109 3 ай бұрын

One of thee best motors…. Wish they’d come up with a 6 cylinder or a V-8 for a Truck.

@TheHomePros6221 3 ай бұрын

me too

@billjunking_fool5549 4 ай бұрын

Nice find😊

@TheHomePros6221 4 ай бұрын

Thanks 👍

@user-ni7tg5fg9k 4 ай бұрын

I'd like to see a video with one of these engines with a nos kit or on a go cart

@TheHomePros6221 4 ай бұрын

Hahah now wouldn’t that be cool! These Diesels aren’t that fast though so we would need a turbo and a good transmission

@RobHereAKATrev2323 3 ай бұрын

Awesome find and save

@TheHomePros6221 3 ай бұрын

😊

@robertrabhudsonhornet5869 4 ай бұрын

If you plan on storing that engine take the injectors out and put some oil into the cylinders and plug all open spots on the engine so you don't get mouse 🐁 getting in and peeing in it that will destroy that good engine the oil in the cylinders will keep it from locking up if your in the cold climate you will need to drain out the block there should be drain plugs. That's cool you found a good engine and a rear end in the strap yard 👍 for even trade you can't go wrong with that 👍. I would put gear lube or even oil in that rear end so it doesn't rust the inside and all the gears that's so cool that both are in good shape.

@TheHomePros6221 4 ай бұрын

Me and you think very much alike 👍😊

@toddshell4525 3 ай бұрын

What lucky finds!

@TheHomePros6221 3 ай бұрын

sure was

@wademizelle3433 4 ай бұрын

Great video, waiting on the next one, thanks and keep them comin.

@TheHomePros6221 4 ай бұрын

Thanks, will do!

@malcolm.703 4 ай бұрын

What a great find and fix well done. 👍👏👏🚜👏👏👍

@TheHomePros6221 4 ай бұрын

Thanks 👍

@AE-lk3uc 3 ай бұрын

Generator head making full power just above idle. Running on 50/50 veg preheated fuel with a glow in the line on a pop switch oh yeah.

@TheHomePros6221 3 ай бұрын

Sounds good

@eric_seguin 4 ай бұрын

I really like your videos. Problem is, you gotta post them. You post them, I'll watch them. Thanks for sharing with us.

@TheHomePros6221 4 ай бұрын

thank you my friend, I’m trying some of these vids take a long time to make

@nathanhale3006 3 ай бұрын

Tygon is the best line I have found also. Made in Ohio near me.

@TheHomePros6221 3 ай бұрын

I think so as well cause ethanol destroys other hoses

@moalleboanne 3 ай бұрын

What a great Engine you have found, its run's realy good . Thanks for your video ... Regards from Holland 🇳🇱.

@TheHomePros6221 3 ай бұрын

Thank you very much!

@kevincris2589 3 ай бұрын

Man i love your videos. Wish i had to the time and space to have cool projects like you so for now i live through your videos. Wish you would post more and more lol

@TheHomePros6221 3 ай бұрын

I appreciate that! I want to put more vids out as well but it takes a ton of work and time to make these videos 😩

@ilovegoatsecks 3 ай бұрын

it dont need no muffler! run it as is!

@599miata 3 ай бұрын

Great job and find there mate.

@TheHomePros6221 3 ай бұрын

Thank u

@somerandomguy3868 4 ай бұрын

Excellent save

@TheHomePros6221 4 ай бұрын

Glad you like it

@diggingdave3868 4 ай бұрын

Great find, Darrell..😊👍 But I hope you never have to change the engine in that excavator....they have certainly shoe horned the engine in there, and have left zero room for manoeuvre...man, it looksa tight fit! Great video as always, buddy....looking forward to the next one...😊👍

@TheHomePros6221 4 ай бұрын

thank you Dave! it sure is tight but if you remove the counter weight it shouldn’t be that bad 🤷 thanks for watching

@Roger-hq1yt 3 ай бұрын

Nice, i just stumbled across this video, thought for a moment it was a Mustie1 video, what a great save, thats a really handy little Engine

@TheHomePros6221 3 ай бұрын

hahaha thank you very much my friend!!😊😊

@Des-kh-41 3 ай бұрын

I had a Yanmar 2gm in one of my sailboats - reliable and bullet proof….

@TheHomePros6221 3 ай бұрын

they are awesome

@rudyrivera7426 3 ай бұрын

Good buy! 👌👍

@TheHomePros6221 3 ай бұрын

good free buy 😊

@christophermarshall5765 3 ай бұрын

That runs great!!

@TheHomePros6221 3 ай бұрын

sure does

@jimmungai1938 3 ай бұрын

Far as I’m concerned you made a couple thousand bucks that day. Good job man I have a three cylinder Janmar in my little John Deere. It was made in 1986 and it has over $4500 on it. I use Amsoil and I use a superior filtration system also anyway, I can go out there 1520° weather just hit the key and it pops right off

@TheHomePros6221 3 ай бұрын

Oh wow! They are made to last👍

@jimmungai1938 3 ай бұрын

I meant to say 4500 hours on my little engine and anyway believe it or not I do between 901,000 hour oil changes but I change my oil filters bought every 200 hours 250 maybe the first filter is be like the frame PHA only it’s a Donaldson filterand my second filter is bigger than that and it filters down to 2 µm. It’s a bypass filter I can go out there in a dead winter time and that thing don’t roll over three or four times and it starts no ether hit the key and go.

@Chefchen21 3 ай бұрын

i live in a smaller city,but direct on the Coastline.So,i have found 2 old Boats,with working Engines.LATER,you found me far out on the Ocean if all Hell breaks out. my Suvival Empire.With Wood and a Woodgasgenerator can i drive both Engines(so i need Diesel,or WOOD ;-) lots of fish arround me make the living much easyer.

@TheHomePros6221 3 ай бұрын

That’s the life 😊

@Chefchen21 3 ай бұрын

right,thats life. here is it relativly easy to pick up old Boats. and there are somany right along the Coastline,som have sunk over the last years,but no one cares.ALL FOR FREE. The Coastguards here have a Card som mark all known sunken small Boats and there are happy to give it to me. And lift them is not the bi g Problem at all,solong you can put Airballons in and lift them little bit,can your drag them to a better place and work on it. alone her are over 200 know small Boats with Dieselengine or Outboard Engine. it,s a hidden Goldmine down there. @@TheHomePros6221

@Urmomsboyfriend01 3 ай бұрын

I think it’d be really cool if you made a turbo diesel go kart with that engine

@TheHomePros6221 3 ай бұрын

Oh yeaaa

@araspel2007 4 ай бұрын

thanks for video

@TheHomePros6221 4 ай бұрын

Most welcome

@frankp215 3 ай бұрын

Nice score!

@TheHomePros6221 3 ай бұрын

Thanks!

@williamwhite9321 4 ай бұрын

Awesome job bro

@TheHomePros6221 4 ай бұрын

Thanks for the visit😊

@geraldhawkins2643 3 ай бұрын

Man!! What a find

@TheHomePros6221 3 ай бұрын

I kno rite!

@blue68chevelle 3 ай бұрын

If I had to guess I would say someone collected all these parts for a project or various projects. Then for whatever reason someone else scrapped them. I would love to have both of those items, especially the yanmar to re-power my simplicity 4040 tractor. We can’t get things out of the piles at our local scrapyard like we used to years ago. They got real pissy the last time I even picked up a couple of Honda engines. Deducted 100 pounds off my scrap for them. But within 45 minutes, I had both of them running, and sold that day.

@TheHomePros6221 3 ай бұрын

Dang yea a lot of yards are like that, I got these from a more privately owned yard and I’ve done buisness in the part with them, I really wish I had gotten it on video there is soo much cool stuff out there like old tractors,engines, forklifts boomlift that has sitting out there for years, a lot is really far gone but a lot is fixable

@blue68chevelle 3 ай бұрын

@@TheHomePros6221 there used to be an old-school scrapyard down by the Missouri Arkansas line. On one side was the scrapyard and on the other side was 20 acres of stuff. The owner thought was too good/old to scrap. I always wanted to go down there with an empty trailer and a pocket full of cash. Never made it though and if I remember right it all got “cleaned out”.

@09FLTRMM77 4 ай бұрын

MM77 Approved 👍🏻👍🏻………………………………………🤔hummmmm………… can he fix a scrapped Yanmar engine……….. YEP!!!!!! LOL

@TheHomePros6221 4 ай бұрын

hahah 😊😊 thanks again for watching my friend!!

@mickwolf1077 3 ай бұрын

Great score

@TheHomePros6221 3 ай бұрын

thank you!

@n.b.p.davenport7066 3 ай бұрын

Great motor for a generator

@TheHomePros6221 3 ай бұрын

Yes sir

@Castleknight 4 ай бұрын

You need a concrete pad to work on, so you can wash stuff, without making mud and have a cleaner place to work on. Is that concrete @ 4:58?

@TheHomePros6221 4 ай бұрын

Oh how I would love that!! I have plans on building a nice shop with concrete and all

@JoshKilen 3 ай бұрын

nice find.

@TheHomePros6221 3 ай бұрын

thanks

@brianbloom1799 3 ай бұрын

You Haft to Put a small Turbo on that., double the Output Power, Make a little dozer.

@TheHomePros6221 3 ай бұрын

I have been seriously considering this!! I actually should have added one in this video!

@MegaDirtyberty 3 ай бұрын

That engine would make an awesome motorbike engine.

@TheHomePros6221 3 ай бұрын

Sure would!

@AZVIDS 4 ай бұрын

That engine looked like it ate some bad Taco Bell😉

@TheHomePros6221 4 ай бұрын

hahaha

@sebas5688654 3 ай бұрын

20:47 -- ох, то самое чувство, когда техника запускается, словно оживает!

@hl8256 3 ай бұрын

An old John Wayne movie "Chisum" Pat Garrett tells William Bonney, he has the Patients of an oyster, I believe the same could be said about you

@TheHomePros6221 3 ай бұрын

😊

@kevinroberts9394 3 ай бұрын

I worked at a scrap yard for a while. If you needed something it was just a matter of time and it would show up. I think a lot of it is because grandpa past away and some of it was just 2 "sticky" but 99% was some 16-25 year old trying not to have a job

@TheHomePros6221 3 ай бұрын

Lol

@P.Trim69 3 ай бұрын

That's nice it crazy what gets tossed. I'm looking for something to put in Suzuki samurai.

@TheHomePros6221 3 ай бұрын

I love those things!

@bbrut3332 3 ай бұрын

You might want to make sure both injectors are functioning properly. When you accelerated the engine it sounded like at one point your engine ran different. You could use a infrared meter to make sure both are running the same temp.

@TheHomePros6221 3 ай бұрын

I really really need an infrared thermometer!! but it seems like the engine runs perfect

@wildbenny11 4 ай бұрын

Ok iam ready for the next video

@TheHomePros6221 4 ай бұрын

Have a bunch coming soon and man one of the projects I just got is gonna be a absolute treat! But it’s still going to be a bit before I get to it

@wildbenny11 4 ай бұрын

@@TheHomePros6221 ok nice

@AsitShouldBe 3 ай бұрын

Bro, you should try the gloves i use, the blue ones maxidex , they are very useful on wet and oily mechanics, if you can find them, you should try😉

@TheHomePros6221 3 ай бұрын

Thank you I’ll def check em out!!🙂

@metalworks2765 4 ай бұрын

nice use it in a boat

@TheHomePros6221 4 ай бұрын

It would be perfect for that

@charlesmurphy1510 4 ай бұрын

Hard to believe your good luck find a good running engine in the scrap yard.

@TheHomePros6221 4 ай бұрын

I know rite!

@harryburford6629 3 ай бұрын

good one

@williamhill9432 3 ай бұрын

Great video Darrell, I am always amazed at your ingenuity and the manner in which you continuously get things working. I know that you have your business to run but I honestly wish that you would post more videos. Thanks so much.

@TheHomePros6221 3 ай бұрын

Thank you so much William!! Very much appreciated!! I’m trying to put more vids out it just takes a lot of time and money but I’m trying to do KZfaq full time I just need a bigger shop with a concrete floor 😊

@AsitShouldBe 3 ай бұрын

Can you use that engine to modify a gas motorbike?😂 a big hug bro

@TheHomePros6221 3 ай бұрын

haha probably 🤷

@AsitShouldBe 3 ай бұрын

@@TheHomePros6221 let's do it!😅👍

@dougwhite2897 2 ай бұрын

That's probably like at least a $1500 engine. I think you did alright. I'm sure it was probably worth more than the scrap you had, that you traded it for.