Рет қаралды 430
How to correctly build and sqaure up a diode laser frame made from aluminium profiles.
Diode laser correct assembly. Eccentric nut adjustment. Flat spots on wheels. Cable installation. Tin foil to square the frame
You will need a set square, or a sheet of paper and some tin foil. We are not roasting a chicken today we are squaring up diode laser frame.
Sorry for the long video, but some useful information is given through out this video. Use the chapters to skip through or rewatch any section we easy
00:00 Intro
02:34 What's covered in this video plus talking about upgrades
03:47 Parts & Unboxing
05:08 Are your profiles straight?
06:45 Lets build it square
08:34 Using the plastic set square to check our build
09:34 Using our tin foil to square up the frame
11:44 Checking the frame for square
13:08 Square wheel issue & marking the eccentric nuts
15:06 Remove the eccentric nuts to mark the least pressure point
18:18 What is a eccentric nut
19:06 Check my bearing run smooth
20:27 Marking the eccentric nut (second nut)
23:11 Adjusting your eccentric nuts
24:20 Beware of back voltage when moving your stepper motors by hand, did it slowly
28:05 Fitting the gantry
30:50 Fitting the legs & control box, GET THE LEVEL with the frame
34:19 Fitting the belts
36:40 How to install the T nuts
41:55 Square the gantry to the frame
45:42 Gantry eccentric nut adjustment
46:10 Square the gantry to the frame, using block, loosen the stepper motor coupler
50:23 Laser head eccentric nut adjustment & stop its wobble
53:28 Fit the laser head and look inside it, remove the smoke protection device
1:00:39 Base board size
1:01:39 Wrap up and look forward to the wiring, another problem to over come
The brass smoke guard is 15.2mm high, 14.2 inside touching the threads and 18mm diameter.
Are you looking to join a Facebook page to learn about the longer ray lasers? Have your questions answered quickly by a great community of like minded people. Here is the site I recommend / 729772195158523
*****************************************************************************************************
If you have found this video useful please consider if you are able to TIP me using the link below. I love my coffee it keeps me going
ko-fi.com/flixmyswitch
*****************************************************************************************************
Check-out my other Playlists
Music by: www.bensound.com
FlixMySwitch all about the stuff I like doing.
Always do you own safety research. This video is made for your enterainment. FlixMyswitch can not be held responsible for any damage to your laser machine, materials, cloths, eye sight, property, your own or others health. Always wear correctly rated eye protection. These laser are not toys, there is a real risk of fire, always have a water spray bottle and Co2 fire extingusher at hand. Never leave your laser unattended.