OEM HID Headlight Bulbs EXPLAINED

No video

OEM HID Headlight Bulbs EXPLAINED | Diode Dynamics

Рет қаралды 146,122

Diode Dynamics

Күн бұрын

Пікірлер: 144

@111mph5 8 ай бұрын

OUTSTANDING! ⭐⭐⭐⭐⭐ Very good explanation of HID headlight bulbs. This guy is right to the point and knows his products. I now know more then the Dodge techs at the dealership. I know exactly what I need for my 2012 Dodge R/T with projection headlights (low beam D3S). THANK YOU VERY MUCH!A+++ 🏆🥇

@diodedynamics 8 ай бұрын

Thank you for the support!

@gamersroost 2 жыл бұрын

THANK GOD. This was exactly what I was looking for (for weeks). Thanks.

@diodedynamics 2 жыл бұрын

Glad to help!

@samdean8807 Жыл бұрын

It took way too long to find this video! All the other videos are just people kinda throwing wires and ballast and bulbs into the engine bay and then saying "see lookit how bright". This video gave me the INFORMATION I was seeking. Cheers 🍻

@diodedynamics Жыл бұрын

Thank you for the support!

@subbuilder3563 3 жыл бұрын

Very concise and clear explanations. Thanks.

@mark3627 9 ай бұрын

Great video Super Informative, and covers the essentials we need as a DIYS person. TY🙏

@TheRdjohnson14 2 жыл бұрын

You've taught me something today bruda 😁🤙🏾

@951pyros 3 жыл бұрын

This helped me on figuring out what I exactly needed for my 2SS camaro , thank you .

@brunocar2006 3 жыл бұрын

It was a class about HID! Tks

@salsapete2132 3 жыл бұрын

Thank you just ordered d2s and was sent d2c thank you for your explanation

@RAAUUULLLL4268 3 жыл бұрын

VERY NICE VIDEO. GAVE ME ALL THE INFO I NEEDED. THANK YOU SO MUCH.

@Mrdealornodeal618 3 жыл бұрын

Very informative. This should have way more views than it does. Thanks.

@diodedynamics 3 жыл бұрын

Thank you, Will!

@gildardomedina8419 4 жыл бұрын

I have a question: why do factory-installed HID's don't take a while to warm up, they turn on as bright as they're going to be right off the bat, while the aftermarket ones take time to get the arc fully charged and give you light? why do they vary? aren't they supposed to be the same? By the way, thanks for sharing the knowledge. Great source of info, thanks Diode Dynamics.

@diodedynamics 4 жыл бұрын

Hey there - not sure exactly what you are referring to, as all HIDs (OEM or aftermarket) will have a warmup time. LEDs on the other hand do not have a warmup time, perhaps you were referencing that?

@davelowets 8 ай бұрын

Factory HIDs warm up to full brightness MUCH faster than cheap aftermarket HID kits because the ballasts in the aftermarket kits are usually of sub-par quality compared to a factory ballast.

@stanleynunes817 3 ай бұрын

I am having hard time locking D3S into the socket a cracked the insulation on the bulb. Secondly how to see if the ballast is working or comparable?

@dinaroussos2972 2 ай бұрын

Help, I have a 2011 audi a5, my driver's side headlight bulb burned out. I learned I have a d3s xenon headlight- low/high beam bulb. I ordered a pair of DMEX d3s bulbs 6000k, oem replacement bulbs (made in china )and removed the headlight assembly , plugged in the newly purchased d3s bulb- and still headlight isn't coming on. The same warning light is still coming on dashboard-( low/high dipped beam ) out. Now the lights that were on the car were Philips Xen EcoStart D3s bulbs. ..made in Germany . I dont know if they are 4300 k, 6000k or what- I thought that must meant the color of the light. My state requires white, so I chose cool white 6000k. Do I need to replace with original brand bulbs ?- Philips Xen Eco Start? The connectors are the same on the cheaper DMEX...why isnt the light coming on ? Could it be the ballast? I feel like if it was a fuse then my passenger side would be out too. Also - ive read other threads where people say their lights were flickering etc , or became dim...mine did not. It was working, and then it died. That's it. Did I hurt something pulling the old bulb out ? Or hurt the new bulb somehow ? How do I know if it is the ballast ? What is the difference between a fresh working d3s bulb Vs a blown d3s bulb??

@diodedynamics 2 ай бұрын

Hey there! Since you purchased a replacement D3S HID bulb and installed it correctly it should ignite and start up even if they're from China and not an OEM bulb. If it didn't start up, you can take the bulb and install it on the other headlight and check for function since one side is operating properly. If the replacement D3S HID bulb works on the functioning side of your vehicle, then you most likely have a bad ballast as you assumed not firing up your working replacement D3S bulb. We would advise contacting a reputable HID specialist like our friends at HID Kit Pros for assistance on how to proceed forward if you need assistance. Website: hidkitpros.com/ Email: sales@hidkitpros.com Phone: 425-391-HIDS

@mujjuman 3 жыл бұрын

AMAZING info thank you omg wow

@narendram4278 7 ай бұрын

Awesome video. Thank you it helped so much. Much appreciated..!

@diodedynamics 7 ай бұрын

Glad it helped!

@8thsinner 4 ай бұрын

OKay, this may be a stupid question but, I don't understand one main thing there, the screen shots showed that different input voltages are up and around 42v, but most batteries are 12v still right? Which part exactly provides the step up thingy? Is that the job of the ballast? The ignitor? Or does that use a separate capacitor? Is that how the igniter works, capacitor from 12volt, which sparks the initial start up arc? New to all this on the hobby level so please excuse my ignorance.

@diodedynamics 3 ай бұрын

Hey there! We'd love to help answer all of your questions! Feel free to give us a call at 314-205-3033, Monday-Friday 10 a.m.- 5 p.m. CST, and our in-house US service team would be happy to help you with any more questions you may have!

@dendens8188 4 ай бұрын

I replaced the bulb and Ballast on my 2013 mustang and the bulb stays on with no keys in on position and head lights off what can cause this

@diodedynamics 3 ай бұрын

Hey there! Please go ahead and give us a call at 314-205-3033, Monday-Friday 10 a.m.- 5 p.m. CST, or shoot us an email at contact@diodedynamics.com, and our in-house US service team would be happy to help you with that!

@TheSilentStar 6 ай бұрын

Awesome video! Thank you.

@diodedynamics 6 ай бұрын

Our pleasure!

@elijahrobinson2362 8 ай бұрын

Do the D1 wires also work on the D3 bulb/ballast? Ford only sells one of the wires and I’d like to replace both wires that attach to each ballast since I’m replacing bulbs, ballasts and getting new OEM headlight assemblies that are made for my 2014 F150 with factory projectors. Any help you can provide is appreciated.

@diodedynamics 8 ай бұрын

Feel free to give us a call at 314-205-3033 Monday-Friday 10 a.m.- 5 p.m. CST, or shoot us an email at contact@diodedynamics.com, and our in-house US service team would be happy to help you with that! Hours: Monday-Friday 10 a.m. - 5 p.m. CDT Email: contact@diodedynamics.com Phone: 314-205-3033

@loafamily5380 Жыл бұрын

Hey what's the name of that bulb that has a black rubber in the middle of the wires please

@diodedynamics Жыл бұрын

Hey there! I'm not sure I understand, do you mind clarifying?

@loafamily5380 Жыл бұрын

@@diodedynamics oh I get it now it's rubber gourmet

@user-lo2hu8pn2k Жыл бұрын

How to check the ballast if the are good for Cadillac Escalade 2005

@diodedynamics Жыл бұрын

Please go ahead and give us a call at 314-205-3033 Monday-Friday 10 a.m.- 5 p.m. CST, or shoot us an email at contact@diodedynamics.com, and our in-house US service team would be happy to help you with that.

@Leo-ob3it 2 ай бұрын

What does “AD/ACor AF” mean in HID and is an D1S AD and D1S AC compatible

@diodedynamics 2 ай бұрын

In the context of HID lighting, “AD/AC” or "AF" can refer to different types of ballasts or control gear used with the bulbs: 1. **AD (Alternating Direct):** This typically refers to ballasts that are designed to work with alternating current (AC) power but have specific functionality for HID systems. It's less common in terminology. 2. **AC (Alternating Current):** This refers to ballasts that operate on AC power. These are the most common types of ballasts used in HID lighting systems. 3. **AF (Alternating Current Frequency):** This could refer to a specific type of AC ballast that operates at a certain frequency, but it is not a standard term in HID lighting and might be a typographical error or a brand-specific notation. Regarding compatibility between D1S AD and D1S AC ballasts: **D1S:** This is a type of HID bulb with an integrated igniter, which requires a specific type of ballast designed for D1S bulbs. **AD vs. AC Compatibility:** If "AD" refers to a specific feature or type of AC ballast, it could mean they are designed with some additional functionality or difference in design compared to a standard AC ballast. However, typically, the critical factor is that both are designed for AC power. **Compatibility:** If both ballasts (D1S AD and D1S AC) are intended for use with D1S bulbs and are designed to operate on AC power, they should generally be compatible with D1S HID bulbs. Always check the manufacturer's specifications to ensure compatibility, as there can be differences in how the ballasts regulate power or interact with the integrated igniter in the D1S bulb. To summarize, the critical compatibility factor is that both ballasts are designed for D1S bulbs and operate on AC power. If "AD" is a designation for a specific feature or functionality within the AC ballast category, it would still typically be compatible, but verifying with manufacturer specifications is always the best practice. We hope that helps!

@tomasflores1606 Жыл бұрын

Understand that this is the most common. What did it also the most annoying. My 1994 Chevy pickup truck just change a lightbulb I'm done😊

@vigneshr5595 3 жыл бұрын

Hi I am having a D2S bulb Phillips dl 50/740 PX32d can you tell me appropriate method to test it please ....

@diodedynamics 3 жыл бұрын

Hi there Vignesh! We don't quite understand your question- sorry! Would you mind further explaining?

@tiburshok31 Жыл бұрын

what are the cars who use d series

@diodedynamics Жыл бұрын

Feel free to give us a call at 314-205-3033 Monday-Friday 10 a.m.- 5 p.m. CST, or shoot us an email at contact@diodedynamics.com, and our service team would be happy to help you with that.

@MN-eo2pp 9 ай бұрын

I have a question; i have sierra 2016 HID d5s light and i want the best one led and what you recommend

@diodedynamics 9 ай бұрын

Unfortunately, we do not offer conversion kits from HID to LED at this time. Sorry about that! We do offer replacement HID bulbs however! Check them out in the link below: www.diodedynamics.com/products/led-bulbs/oem-hid/d5-d6.html

@CT-vl3iu Жыл бұрын

The biggest issue that we have with these HIDs is their colour shades. I am struggling with Philips D4R 6000K bulbs...its so frustrating...they all have different blue shades when light up. Matching this is so frustrating

@diodedynamics Жыл бұрын

We understand your frustration! If you let them warm up for about 30 minutes to get them to operating temp, it should be much easier to match them up!

@CT-vl3iu Жыл бұрын

@@diodedynamics that won't help...even after 2hours the shade difference is visible...

@davelowets 8 ай бұрын

I haven't had this issue with the Philips bulbs. Yes, the shades might be a touch different for a few minutes, but after that, they've ALWAYS been the same color temp once warmed up... 🤷

@iiWeemann 3 жыл бұрын

What do you recommend on the VLAND projector drl headlights for Dodge Challenger ?

@diodedynamics 3 жыл бұрын

Please go ahead and give us a call at 314-205-3033 Monday-Friday 10 a.m.- 5 p.m. CST, or shoot us an email at contact@diodedynamics.com, and our service team would be happy to help make a recommendation!

@theoxygen876 11 ай бұрын

Hey thank you for the information and I think you are doing a good job at explaining, however my brain is just too slow to get it all, so I would love to ask you a question, what would you recommend for a projector headlamp for Toyota Avensis 2013?

@diodedynamics 11 ай бұрын

The 2013 Avensis uses an H11 Bulb. We do offer LED replacement bulbs in that size on our website! Check them out in the link below: www.diodedynamics.com/led-bulbs/foglight-drl/h11-led-bulb.html

@rudydaberry122 3 жыл бұрын

I been thinking about getting some d2s to amp adapters and am curious if they are good quality

@diodedynamics 3 жыл бұрын

We're sure there are good quality adapters out there. As to which brands are, we're not sure.

@TheRdjohnson14 2 жыл бұрын

Thanks

@bumbumcharlie2186 3 жыл бұрын

Hi There See some old mercedes or volvo which has xenon in an open reflector ... why is that ? I Know from retro fitting that a reflector headlamp makes more output than a projector one with same bulb

@diodedynamics 3 жыл бұрын

It definitely could depend on the design of the bulb and the way it spreads light. I wish we could more accurately answer that for you! Typically, HID bulbs perform better in projector housings because HIDs spread light all over, and the projector captures and sends it in one direction!

@garysoden9048 4 жыл бұрын

Can I run a brighter bulb than the OEM D5S HID bulb in my 2019 GMC Sierra Denali 2500? Also, something brighter than the OEM LED Fog light as well?

@diodedynamics 4 жыл бұрын

Hey, Gary! Unfortunately, we do not have a direct replacement for those stock bulbs that will be any brighter. You might consider some of our Stage Series LED Light bars or LED Pods to help with visibility for night time driving. Here is a link to the listing page: www.diodedynamics.com/off-road-auxiliary-led.html

@Xavier1320 3 жыл бұрын

I'm a little lost on what type of Bulb I need.. I have a 2011 Mustang gt premium has factory HID. I can't find a clear answer on the type of bulb it needs, any help is greatly appreciated. Thank you.

@diodedynamics 3 жыл бұрын

Hey there! Your Mustang should use a D3S size HID bulb! www.diodedynamics.com/replacement-oem-hid-bulbs-for-2006-2014-ford-mustang-pair.html

@Kflight2517 2 жыл бұрын

Hi, very informative video. I got a2014 Audi sq5 with factory 35w d3s, can I safely step up to 55w d3s? Will it melt my headlights housings? Thanks

@diodedynamics 2 жыл бұрын

Hey there! Please go ahead and give us a call at 314-205-3033 Monday-Friday 10 a.m.- 5 p.m. CST, or shoot us an email at contact@diodedynamics.com, and our service team can give you more information on the switch!

@davelowets 8 ай бұрын

No, it wont

@mightymoe4635 3 жыл бұрын

I'm replacing HID bulb (D2S) on a 2007 Mercedes GL450. I removed the bulb without issue however trying to get the ignitor back onto the housing is another story. For some reason I can't lock (close) it on the housing. It just won't make that 1/4 turn I need to lock it in place. Please advise. Thanks!

@diodedynamics 3 жыл бұрын

Hey there! Go ahead and give us a call at 314-205-3033 Monday-Wednesday 10 a.m.- 5 p.m. CST (we are closed 12/31 and 1/1), or shoot us an email at contact@diodedynamics.com, and we can try to help you with that!

@davelowets 8 ай бұрын

Push down harder as you turn?? 🤷 You DO need to overcome the "springyness" of the seal, and push it down hard enough so that the seal makes full contact with the housing and well, seals, before it will rotate and lock.

@happychildhood8806 3 жыл бұрын

Good video. Does it get hot during operation? I am afraid it can destroy my headlights. the original Osram bulb has a temperature of 4100k. an I replaced the aftermarket 10000K. thank you.

@diodedynamics 3 жыл бұрын

No, they shouldn't get hot enough to damage your headlight lenses.

@happychildhood8806 3 жыл бұрын

@@diodedynamics Perfect. Thanks a lot!

@davelowets 8 ай бұрын

@@happychildhood8806 How the HELL can you see at night with those?? 🤷

@akaitv6606 3 жыл бұрын

Hi mate I've got factory chrysler voyager 2013 D1s headlight projector Rh doesn't work they both blew together after going through a high pressure car wash . Changed both lights LH works ok now however RH doesn't. It's not a bulb issue , have tried a few what's likely to be the problem ?..

@diodedynamics 3 жыл бұрын

Hi there! Please go ahead and give us a call at 314-205-3033 Monday-Friday 10 a.m.- 5 p.m. CST, or shoot us an email at contact@diodedynamics.com, and our service team would be happy to help you troubleshoot!

@davelowets 8 ай бұрын

Check your fuses....

@meshal0hd893 3 жыл бұрын

I just buy a headlight for my car but the ballast is Hella D1SD1R and the bulb is D3S, is that OK ?

@diodedynamics 3 жыл бұрын

Your current is a D1S, and you ordered a D3S?

@joelatmllc4550 4 жыл бұрын

I just buy a new headlight and it didn’t have bulbs and the old one don’t work on it h7 to new D2s what adapter I need

@diodedynamics 4 жыл бұрын

Hi there! You will need to source an H7 to D2S adapter to plug the new bulb into your factory harness. Unfortunately, we don't offer this adapter. Sorry!

@rindershow212 2 жыл бұрын

Hi, I have a 2011 chrysler 300 5.7 hemi with self leveling hid headlights. Now the drivers side illuminates a purplish color which I think is going bad. What do you recommend I do or buy . Switch to led or replace? Help pls thanks. I also noticed my hids in general are not bright.

@diodedynamics 2 жыл бұрын

We would replace them with OEM HID Replacements! www.diodedynamics.com/replacement-oem-hid-bulbs-for-2011-2018-chrysler-300-pair.html

@rindershow212 2 жыл бұрын

@@diodedynamics I appreciate the prompt reply. I will be ordering asap. Can you explain which color temp best matches the oem color. I see 4300,5000k,6000k,8000k. Which do you recommend that will be slightly brighter than stock without looking to blueish if that makes sense.

@Mamako0 4 жыл бұрын

My Alfa Romeo 159SW comes with D1S 12V 35W, may you please recommend a replacement for city drive. Thank you!

@diodedynamics 4 жыл бұрын

Hi there! We offer direct OEM replacement D1S HID bulbs! www.diodedynamics.com/replacement-d1s-hid-bulbs-pair.html

@ihsanaura2073 4 жыл бұрын

Hello, i have d8s bulb on suzuki baleno projectors. Is it the same with d2s, d3s, or the other?

@diodedynamics 4 жыл бұрын

Hi there! Unfortunately, we no longer offer headlight replacement bulbs. Sorry about that!

@geneesswein9469 3 жыл бұрын

My 2010 Buick Lacrosse has HID headlamps. The driver's side is noticealy dimmer, almost a yellow color versus the passenger side which is a bright white color. There is no condensation in the headlight assembly and no corrosion anywhere on th

@diodedynamics 3 жыл бұрын

HID head lamps loose power over time. When this happens they will dim like you are referring to. It may just be time to replace them!

@davelowets 8 ай бұрын

Wrong color temp bulb in that side, a ballast going out, or bulb starting to fail. One of these 3 scenarios

@beast_hunter_1933 3 жыл бұрын

Do you guys have something for a ford mustang 2015? Something brighter for headlights

@diodedynamics 3 жыл бұрын

Hi there! We do offer OEM-HID replacements for your Mustang. However, it will not be brighter than your factory bulbs. HIDs loose brightness overtime, so they will be as bright as your HIDs were when the car was new. www.diodedynamics.com/replacement-oem-hid-bulbs-for-2015-2017-ford-mustang-pair.html

@edsonemanuel5535 2 жыл бұрын

Is there an led replacement bulb for d2r bulbs?

@diodedynamics 2 жыл бұрын

Unfortunately, we do not offer this. Sorry!

@otto99able16 3 жыл бұрын

Hi 2013 srx caddy hid's...is that a D2s..projection light?

@diodedynamics 3 жыл бұрын

The 13 SRX is a D2S HID in a projector. And we offer them! www.diodedynamics.com/replacement-oem-hid-bulbs-for-2011-2016-cadillac-srx-pair.html

@seangowan7441 3 жыл бұрын

Do you have an install video like for example for a 9005 hid kit?

@diodedynamics 3 жыл бұрын

Unfortunately, we do not. Sorry!

@davelowets 8 ай бұрын

Don't do it.... Your halogen lenses and reflectors are NOT designed for a HID bulb, and you can end up with a crappy beam and blinding other drivers. Sometimes it works out OK with certain headlight designs, and sometimes it does NOT.. Not to mention, it's illegal to do so also.

@AS-pj1vb 3 жыл бұрын

Hi Can I use D4 on D2s headlight? And which is better?

@diodedynamics 3 жыл бұрын

Hi there! With our OEM replacement HID bulbs, the output will be exactly the same on both sizes. We recommend using D2S bulbs!

@hamzatahir5964 4 жыл бұрын

What do u recommend me for my 2006 daihatsu be-go...projector headlight

@diodedynamics 4 жыл бұрын

Hi there! Is it the single or twin headlight option?

@eddieflorean3221 4 жыл бұрын

I got a 2015 Chevy Malibu with OEM hid bulbs and one already burn out..can you please send me a link where can I buy the bulb cuz the factory bulbs are too expensive..thank you

@diodedynamics 4 жыл бұрын

Hi there! Unfortunately, we don't offer OEM Replacements for your 2015 Malibu. However, we do offer plug-and-play HID Conversion Kits for them. You can check them out below! www.diodedynamics.com/low-beam-hid-conversion-kit-for-2004-2016-chevrolet-malibu.html

@eddieflorean3221 4 жыл бұрын

@@diodedynamics the HID conversion kits you guys sell brighter then the OEM light bulbs?

@diodedynamics 4 жыл бұрын

@@eddieflorean3221 Yes they are!

@monishpolad3920 3 жыл бұрын

Can i use h7 hid bulb in d1s headlight assembly

@diodedynamics 3 жыл бұрын

Unfortunately, only a D1S size bulb will fit in a D1S assembly.

@dannyschmidt9058 4 жыл бұрын

I have a 2012 eclipse factory hid the problem is the headlight assembly is sh*t and Mitsubishi wants $650 per headlight assembly not happening can you tell me if I buy aftermarket headlight assembly can I just splice the 3 wires ? Or do they make a jumper wire harness that you can plug factory harness in one end and H13 stock or aftermarket hid in other please help ?

@diodedynamics 4 жыл бұрын

Hmm - we do make a size H13 HID Conversion kit for your 2012 Eclipse. We don't offer an adapter wire for this purpose, but if you can find an aftermarket OE replacement housing made for an H13 bulb, this kit may still work.

@dannyschmidt9058 4 жыл бұрын

Diode Dynamics - I bought the aftermarket headlights they came w h13 bulb autozone sold a 3 wire adapter to splice will that work ?

@diodedynamics 4 жыл бұрын

@@dannyschmidt9058 Hmmm- we're not sure. You could always reach out to our service team at contact@diodedynamics.com with some pics, and they can help you look!

@suavez.productions9354 4 жыл бұрын

How important is the ground wire for the bi xenon kit

@diodedynamics 4 жыл бұрын

You must establish a ground.

@davelowets 8 ай бұрын

Won't work without it

@jedd1004 5 жыл бұрын

Great video, what would you recommend for a '19 Silverado (with crappy reflector housing H-11) as an upgrade?

@diodedynamics 5 жыл бұрын

Hey Jedd! Our H11 SL1 should be a great option for your Silverado, as long as you have a removable H11 halogen style bulb! www.diodedynamics.com/h11-sl1-led-headlight-bulbs.html

@darrentoews3151 4 жыл бұрын

jedd baker put halogens in it ..they don’t scatter

@diodedynamics 4 жыл бұрын

@@darrentoews3151, either do our SL1 LED bulb, which provides a great increase in brightness over stock! :)

@PeterFeltersnatch852 Жыл бұрын

@@darrentoews3151Halogens😂😂😂 It's 2023 your two decades behind buddy

@polayuthsuwanumpa4082 4 жыл бұрын

The D5s bulb doesn't need ballasts, right?

@diodedynamics 4 жыл бұрын

That's correct!

@josheverette2999 4 жыл бұрын

soo if headlights take d1.. Can i swap it out for D3?

@diodedynamics 4 жыл бұрын

We only recommend replacing a D1 bulb with a D1, since D3 bulbs have different voltage requirements. www.diodedynamics.com/replacement-d1s-hid-bulbs-pair.html

@subham161 4 жыл бұрын

Which is the replacement for d5s i can buy??

@diodedynamics 4 жыл бұрын

Unfortunately we don't have a D5S HID replacement option at this time. Sorry about that!

@amauryjay4 4 жыл бұрын

Are D1S and D1R interchangeable?

@diodedynamics 4 жыл бұрын

Hi there! They typically have the same size ballast and bulb, however, they are designed for different applications. Although, they do offer offer D1S/D1R bulbs where both fit, most D1S are designed for projector housings, while most D1R are designed for reflector housings. We offer size D1S!

@A12.- 5 жыл бұрын

I currently have a single d3s hid bulb that works for both high and low beam. If i replace it with an h11 led bulb will it work fine?

@diodedynamics 5 жыл бұрын

Hello! If you have an OEM D3S bulb, you will not be able to convert over to H11 - sorry!

@davelowets 8 ай бұрын

Will not fit in housing

@backlineguy Жыл бұрын

Guess I misunderstood...bought D3S lamps thinking they were interchangeable with D1S lamps...THEY ARE NOT...the connector is not the same...shame on me

@GoMango_Scat_392 3 жыл бұрын

I have a 2014 Hyundai Santa Fe with OEM HID D3S bulbs. I would be able to run your 8k replacement bulbs without any issue correct?

@diodedynamics 3 жыл бұрын

Yep! They will be a direct replacement!

@GoMango_Scat_392 3 жыл бұрын

@@diodedynamics perfect, thank you for the fast response.

@diodedynamics 3 жыл бұрын

@@GoMango_Scat_392 you're welcome!

@BigThumpr1 4 жыл бұрын

Best upgrade for the HID, ditch them and go with a LED conversion.

@reeisessit 4 жыл бұрын

No, definetely no.

@mcplutt Жыл бұрын

I am not convinced.

@mrman8856 Жыл бұрын

HID is outdated these days. And this video explained why! IT'S JUST TOO MUCH, especially when you can get an LED and just plug and play.

@davelowets 8 ай бұрын

I still like HIDs MUCH better than LEDs. They're not "outdated", HID technology is STILL used all OVER the place today. Not EVERYONE likes the very narrow color spectrum of an LED.

@Mr.Thermistor7228 8 ай бұрын

Lol theres really not much to it... led can easily become problematic... HID is the better option for many reasons

@ixfxi 8 ай бұрын

HID is definitely superior in many ways. LED has some unique advantages though. As does halogen. Every technology has its pros and cons.