Dirt Cheap Blacksmithing - Forging with a hair dryer

Рет қаралды 704,703

8 ай бұрын

Money can be tight for many people making it hard to start blacksmithing. But it can be dirt cheap to get started with some very simple forging. Using a hair dryer for a forge blower, old pallets for fuel and a sledge hammer as an anvil, lets start forging.
Previous $500 shop video - • Affordable Blacksmithi...
Bounce house blower - s.vevor.com/bfQCDL
Starter Anvil - s.vevor.com/bfQn97
Other useful links
Blacksmith Supply: www.blacksmithsupply.com/
Use discount code "bear5"
Main shop Anvil provided by; Fontanini Anvil
www.stevefontaniniblacksmith.com
Precut blanks for forging available from:
www.blacksmithingblanks.com
use coupon code John at checkout.
My blacksmiths apron
www.Forge-Aprons.com use code BBF
Music sourced through Epidemic sound
www.epidemicsound.com/referra...
Become a Patron - / blackbearforge
Donate - www.paypal.me/BlackBearForge
Shop - www.blackbearforge.etsy.com
Web site - www.blackbearforge.com
Instagram - / blackbearfo. .
FaceBook - / john.blackbe. .
John Switzer channel - / johnswitzer
Some of my most used gear*
Canon EOS R6 Mirrorless Camera - adorama.rfvk.net/b3yZ7v
Canon EOS R Mirrorless Camera - adorama.rfvk.net/J50gq
Canon RF 24-70mm f/2.8 L Lens - adorama.rfvk.net/6bb7yV
Canon RF 15-35mm f/2.8 L Lens - adorama.rfvk.net/rneRoG
Sony ZV1 point and shoot camera - adorama.rfvk.net/BXKMkJ
Rode Wireless Go microphone - adorama.rfvk.net/YggLRm
Deity V Mic D3 pro - adorama.rfvk.net/mxO51
Insta360 One X2 - www.insta360.com/sal/one_x2?i...
Insta360 Go2 - www.insta360.com/sal/go_2?ins...
Autel Evo II pro drone - auteldrones.com/?ref=HUB40s11...
Autel Evo Nano+ drone - auteldrones.com/?ref=HUB40s11...
*Links include affiliate links
Mailing address:
Black Bear Forge
P.O. Box 4
Beulah, CO 81023
Below you will find useful links that will help you in your journey as a blacksmith.
To find more information in blacksmithing in the US or to search for your local ABANA affiliate group visit.
www.abana.org/
Blacksmithing tools and supplies
Self contained air hammers - www.saymakhammers.com/
General blacksmithing supplies - www.oleoacresfarriersupply.com/
General blacksmithing supplies - www.piehtoolco.com/
General blacksmithing supplies - www.centaurforge.com/
General blacksmithing supplies - www.blacksmithsdepot.com/
General blacksmithing supplies - www.blacksmithsupply.com/
Square head bolts and lags - www.blacksmithbolt.com/
New anvils - www.oldworldanvils.com/
New anvils - www.nimbaanvils.com/
New anvils -
Industrial supplier - www.mcmaster.com
Tong blanks and tools - kensironstore.com/
Fire brick and refractory - refwest.com
Blacksmithing and related activities can be hazardous. These videos are not a substitute for competent professional instruction. Your safety is your sole responsibility. Always use appropriate safety equipment including eye and ear protection when working in the shop. Follow manufactures safety guidelines for the use of all equipment. In the event something shown in one of these videos seems unsafe, it is up to you to make the appropriate changes to protect yourself.t yourself.

Пікірлер: 677

@elitearbor 8 ай бұрын

In today's technological world, we have access to so many options. The tools might not be immediately obvious, but we're entirely surrounded by potential. Just takes a little bit of thinking to recognize!

@Aaron_Barrett 8 ай бұрын

Just visit local scrap yard! ❤

@MattQrillz 8 ай бұрын

Too right mate, innovation. Teaching the young lad gets him thinking aswell. He actually is the inspiration for my chipping hammer. Cut the tip off* an old picaxe.

@thekingflea2199 8 ай бұрын

Not just that a black smith back in the day had that fire burning constantly to be hotter and hotter if they had to do it this way a couple days worth of coals she will be rolling heat

@oceanbytez847 8 ай бұрын

Thinking and experience. Someone who knows little about smithing or tools would never reach this conclusion, but someone who knows a thing or two stands a fair shake at striking genius every now and again.

@nyetloki 8 ай бұрын

Too many options lead to selection paralysis

@Joe_for_real 8 ай бұрын

John is going from the most advanced blacksmithing shop with presses and powerhammers to a forge on the ground, becoming more primitive. At the same time, John Plant of Primitive Technology is working on his smelting and working his way into the iron age. At this rate they are going to meet right in the middle.

@horehoundbasedcandy8736 8 ай бұрын

😂😂😂

@PatrickKQ4HBD 8 ай бұрын

👌

@watzdefuque5378 8 ай бұрын

This would be an amazing crossover.

@JavierChiappa 8 ай бұрын

I gues they will eventually join their homemade rails and drive a homemade vapor locomotive to visit.

@DungeonMetal 7 ай бұрын

🏆 winning comment ha ha ha

@jackcampbell3016 8 ай бұрын

I started out with a similar setup about 4 years ago spurred on by your videos. I had £20 im my account and had just moved back to the UK. I used plaster of Paris and a baking tray with charcoal and a sledge as an anvil. Today I have a forge and am slowly starting to make it pay the bills. Thank you so much for continuing to make this craft accessible.

@BlackBearForge 8 ай бұрын

That is awesome!

@daveoseas 8 күн бұрын

Love your help for beginners

@rickardhansson1861 8 ай бұрын

When I started blacksmithing 18 years ago, my first forge was a rusty old charcoal grill connected to a hair dryer. A piece of railroad track was my first anvil. It worked fine and allowed me to try enough blacksmithing before deciding if I wanted to get more invested. Also, looking back at my first setup today really makes me appreciate having a proper forge and anvil.

@Mr_man69 8 ай бұрын

Same, I've been forging for 2 years and I've still got a railroad anvil cause I am not spending £900 on an anvil

@SamsungShawty 8 ай бұрын

I'm also a railroad anvil guy. I've got a leafblower and blackpipe for my air

@DeepFleeceheart 8 ай бұрын

I made my forge out of a break drum i got from the salvage yard and an old bathroom fan i frankensteined together (with a dimmer switch!) And i got a 100 anvil from the hardware store that was about the sixe of a football. It was fun, but ATE through the charcoal....

@No.Good.Nickname 7 ай бұрын

Just startest forging this year, with poor quality steel, a piece of traintrack and a Hammer. Even without fire it can Work.

@MrPablosek 7 ай бұрын

Damn. How common is using a piece of railroads for an anvil? Haha. I've been thinking of doing it myself if I ever start blacksmithing. Had this small piece for years sitting at home.

@IAmEddie 8 ай бұрын

This legitimately gives every standard household blacksmithing capabilities. You have literally increased productive potential of humanity a percentage point and I'm favoriting and downloading this video.

@edgarburlyman738 8 ай бұрын

C'mon man, show some enthusiasm

@thecoolbyzantine24 7 ай бұрын

it saddens me to think that some people wont even use this absolutely world changing technique

@IAmEddie 7 ай бұрын

@@thecoolbyzantine24 be that *one* who entices a neighbor 🤘⚒️

@karara5532 7 ай бұрын

Every standard household has an area to do this? Doubtful

@edgarburlyman738 7 ай бұрын

@@karara5532 apartments you need to use a blowtorch and ideally when everyone's at a festival or something.

@dereksstuff8395 8 ай бұрын

Many years ago I asked my grandfather if i could buy an anvil from him because I was interested in smithing. Instead He gave me a piece of RR track. I went to our abandoned RR tracks and found some hard coal. A brake rotor, some pipe, a hairdryer was my forge. Made some of my most beautiful wall hooks on that rig. Thank you John.

@jeffgoode9865 11 күн бұрын

I like my hobbies, and learning cheap methods, because...I don't have much leftover monthly income. I've learned sewing and leathercraft to make my own clothes and shoes, woodwork to make little useful things for myself and my wife, but I've never been able to break into smithing. This video, and other videos and channels like this are really life savers. Having hobbies makes life worth living.

@paulregner5335 8 ай бұрын

This video brought to mind a couple of your previous videos about historical Viking anvils. They certainly weren't using 150-pound anvils at their forges, and they managed to make everything they could ever need. An excellent video. Thank you!

@ronnie2115 8 ай бұрын

That's how I started, hammer, charcoal grill, coal, hairdryer, metal block

@Vikingwerk 8 ай бұрын

Mine was the top of a pressure tank, a shop vac, charcoal, a hammer, and an old anvil my uncle left at our house, that was welded to a stand with 1” rod for legs, so it would sink into the ground and tip over.

@ForTheGoldenOak 8 ай бұрын

I'm so amazed that people just have metal blocks. I just can't find any good Anvil. Currently using a normal small hammer

@ronnie2115 8 ай бұрын

@@ForTheGoldenOak used to work at a metal fab shop. Check around for one of those, they always have scrap lying around

@JamesWhite-tg4kw 7 ай бұрын

Scrap yard

@BlooCollaGal 15 күн бұрын

@@ronnie2115 Best part of working at a fab shop is all the free scrap

@markmoreno7295 8 ай бұрын

The notion that anyone would consider using such a setup makes me realize 2 things, 1st that some people are that interested in learning blacksmithing, and 2nd that I am lucky to have such a nice anvil and a good assortment of hammers. It certainly encourages me to use what I’ve got.

@WYO_Cowboy_Joe 8 ай бұрын

The notion that anyone would consider making such a comment makes me realize that there are people out there who should refrain from commenting lest they appear to look like they're bragadocious.

@markmoreno7295 8 ай бұрын

@@WYO_Cowboy_Joe sorry, my intent was not to be thoughtless, please feel free to delete my comment.

@mgeller854 Ай бұрын

Welcome to the unnecessary comment section.

@kurtispalmer1351 11 күн бұрын

Could be worse I tried anthracite melted a hair dryer have a anvil and hammers and metals then tried propane and that didn't work now I just paid for 100 pound furnace I tried bricks I didn't have anything soil wise and working on these got me kicked out now I live in a flat what a world

@kurtispalmer1351 11 күн бұрын

It's not melding very fast you need a higher heat but it works at least

@buttonvalley 8 ай бұрын

I think the success of this setup is due more to the skill of the man wielding the hammer than any other factor.

@chewyakarieckenicholas6049 8 ай бұрын

I started in the same way with a $10 grill from Dollar General and some old fire wood and a large rock so basically I truly appreciate this video and I appreciate that you showed how to get started extremely cheap

@robphone4895 8 ай бұрын

Haha, this is more or less how I started years ago. My son asked daddy can we do some forging. I don't know let's try. I`m hooked ever since.

@welshhomestead Ай бұрын

I play guitar and I remember someone once saying "The great guitarists don't get amazing tone from their equipment, they get it from their fingers" - it's so true. If you know what you're doing you can do anything, with almost anything. Great video thank you

@JohnnyAllan-vj7sj 12 күн бұрын

It's mostly from the equipment though

@Typical.Anomaly Күн бұрын

90% of tone comes from the speaker in the cabinet and the microphone you record it with.

@timberanvil3788 8 ай бұрын

Ah yes...the good ol hair dryer days... I burned up a couple Goodwill hair dryers as they're apparently not made for a 3-4hr 100% duty cycle. What I didn't like was that the hair dryer was way too much air for the small stock I was playing with so I upgraded to a bathroom exhaust fan from the hardware store and a makeshift damper... but that was 8-9yrs ago....I've come a long way since 😂 great video sir!

@ralfbear 8 ай бұрын

I've made a few knives with this sort of setup in the past... definitely functional. One thing I did end up doing is chisel out a hole in an old wooden log and set the sledgehammer in that, as you suggested. Worked far better...

@BlooCollaGal 15 күн бұрын

That's about the level of effort where I'd just spend $100 on a real anvil.

@ralfbear 15 күн бұрын

@@BlooCollaGal maybe in the States... In some other countries, anvils run far more expensive than that... but yes, buying an anvil would be nicer and more versatile. 👍🏻

@Bangalangs 8 ай бұрын

Takes me back to when I started. Didn’t quite have a hole in the ground, but I did have a junk brake drum with a hair dryer +pipe. Wasted a lot of hardwood charcoal that was given to me. Had a harbor freight anvil though. That anvil is still a useful piece of equipment, I prop the shop door open with it when it’s hot. A tip for people wanting to use bricks or stones* if you use bricks, make sure they’ve been fired, not poured cement bricks. With stone, make sure your stones haven’t been sourced from near a source of water. Both stone and concrete can absorb moisture that can make the material burst in a forge. Don’t use cinder blocks. Wear your safety glasses for sure. Another excellent video sir.

@mikeredrugger 8 ай бұрын

For my coal forge I run a bouncy house blower, a 30gal drum, an old lawn mower deck, a brake drum. I have made many knives using this setup and done a TON of forge welding and such. Been a lot of fun just recently bought a propane forge for the first time in my 7 years of smithing.

@benjhind 8 ай бұрын

Well done John. My back hurts just watching this video. Wishing you health and happiness.

@BlackBearForge 8 ай бұрын

Its not something I would do often, my knees start to complain

@scottyuhrich 8 ай бұрын

I love this video as it shows just how easy it is to start forging. I wanted to for years, and even though I had a number of tools to do the work, I struggled to find a forge. Of course, once I found one, several others just seemed to fall into my lap. There must be some sort of weird inverse proportion rule about how badly you want or need something and its availability to you.

@honthirty_ 8 ай бұрын

" Once I found one, several others just seemed to fall into my lap", Is true for girlfriends too.

@parkinbs2222 8 ай бұрын

@@honthirty_I must be missing something then...😂

@Br0ns0n 8 ай бұрын

This is fantastic. I hope it inspires those wanting to try but don't have a few grand to get started. This video says "you can do it!"

@robsonsantosOSO 8 ай бұрын

Here in Brazil there are very few blacksmiths but several bladesmiths and many of them started forging blades exactly like this, adapting forges and anvils with scrap and available material. Great video!👍

@everycoLor_312 8 ай бұрын

😊

@anonimoqualquer5503 11 күн бұрын

sempre tem um brasileiro

@robsonsantosOSO 11 күн бұрын

@@anonimoqualquer5503 Ou dois...

@mjm5899 4 күн бұрын

Três, até

@laytonmiller5865 8 ай бұрын

This video is why Black Bear is the cornerstone of the community. No judgement, all practicality. Good stuff.

@BlackBearForge 8 ай бұрын

Thank you. I appreciate that

@ga5743 8 ай бұрын

Whatever works works, now to find an easy way to get up off the ground 😀. Thanks John for making videos for us. Enjoy your day.

@trailblazerforgeco 8 ай бұрын

John, had to sell all my good and heavy forge and anvil due to military move but this keeps my boys and I in the game. Thank you!

@colvinwellborn 8 ай бұрын

I've seen a lot of takes on a makeshift anvil around on the internet, and honestly none of them seem as simple, cheap, and effective as a sledge hammer. That's genius.

@CausticPuffin 8 ай бұрын

I started with a hair dryer, a box with clay and the end cap of an air tank for a forge. Dropped a 20lb piece of tool steel in a stump. Definitely suitable for a beginner to make hooks and small edc knives.

@pocketchange3543 8 ай бұрын

Been there done that. My #1 tip is getting your "anvil" up at a good working height makes a huge difference. It really sucks forging off your knees and hunched over.

@BlooCollaGal 15 күн бұрын

I accidently made the table my anvil is on _just a little_ too tall... Now I have to use a step stool lmao

@fredschmidt6802 8 ай бұрын

I used a propane grill some fire brick a weed burner . I also did the grill charcoal & hair dryer . It's a way to start & helps justify the money spent to get better stuff . Wife's can be encouraging or hindering in getting into something different

@IronsInTheFire-Official 8 ай бұрын

This is awesome :D I reckon one could stretch fuel consumption just a little by turning down or off the hair dryer in between heats. Maybe hit the switch right before pulling the piece from the fire, etc. Lovely video John!

@craigcarolmiller536 8 ай бұрын

I was just going to add the same comment! 😁

@pettere8429 8 ай бұрын

Get a good, foot operated switch perhaps...

@Vic1943_ 8 ай бұрын

The Vikings did it the same way great idea Mr John thanks for posting blessings to you and your family

@colterreicherter6189 8 ай бұрын

Good lord, that is exactly how I started. And with a few more bricks and proper charcoal, you can actually forge weld in such a set up. Don't ask me how I know... I am a bit beyond that now, but it brings back a lot of good memories.

@metalhero117 14 күн бұрын

I'm pretty much broke, but have always wanted to try out blacksmithing. It looks like an excellent hobby that I could spend the rest of my life learning and enjoying. Between this video and this comment here I now have some hope that I'll get to try it out some day

@FallenAnvilForge 8 ай бұрын

Pretty much a bushcraft forge, little unwieldy but completely doable. Morning John.

@tdyblacksmithkeithcoleman3365 8 ай бұрын

I'm glad to say, I haven't been at that level of need in a few years. I recommend a cheap shop vac ($20) instead of a hair dryer. If a sledge is all you have, I would still mount it on a stump. Watching you kneel, hurt my knees😅. Love the content!

@richardsurber8226 8 ай бұрын

You are the courageous blacksmith. Thanks John

@r3ngokuking 8 ай бұрын

My first forge was an old brake rotor in a box of dirt, anvil was a salvaged piece of I-beam with a chunk of old heavy truck leaf spring welded to the top. It wasn't glamorous, but it worked, and it got me started. There's all kinds of videos out there about how to get started for cheap, but I love going back a few years and being nostalgic about where I came from. Just proves, where there's a will, there's a way.

@abitoffblacksmithing9985 8 ай бұрын

Iam currently building my 3rd forge started with the old BBQ bottom an old tube from a satellite dish and my wife's hair dryer ( she had to get a new one) lol!! Then built a propane forge from scratch ,gave that one to a new smithy i ran into. Now im building my final one I think? Lol!! My anvil still is a120 lb block of aneald 4140 and an old railroad spike hammer for a horn i have ground down and mounted on a shaft and mounted in my stump next to my anvil. Once I moved some hot steel under my hammer I was hooked...

@danbreyfogle8486 8 ай бұрын

One of my early woodworking shops was heated with a small cast iron (farm store brand) stove and pallet wood. And like your simple forge, I spent more time stoking the stove than woodworking. Pallet wood burns pretty fast, hot, but fast.

@FarmsteadForge 8 ай бұрын

Great job thinking outside of the box. I'm shocked how hot you could get it with just wood. Thanks!

@-ink-7622 8 ай бұрын

Its nice to see you showing this, I used to do this when i first started blacksmithing! Tho i used a small 5kg anvil, a cast iron pot as a forge and a fireplace bellows for air. Used to go out into the woods to do forging with everything fitting inside my backpack, except the charcoal i used! Dont have a youtube channel for my blacksmithing, Winter Heart Forge here by the way! Keep up the good work!

@jasoncooley1907 8 ай бұрын

Awesome showing what one can do with very little. Thinking outside the box is a great thing. Thank you for sharing your knowledge.

@racheledwards4833 7 ай бұрын

I enjoyed this video so much, not that I feel it's the dream set up, but that it can be done. It's amazing! And when it comes down to it, that's what it's all about, making something from nothing, to be able to make what we need from what we have. I love it!! Thank you so much.

@Dannysoutherner 8 ай бұрын

I love the improvise, adapt, overcome methods. I like having a nice anvil now - my forge is a paint can lined with refractory cement - still have my railroad track from a state sale - and I love seeing people make something from nothing like this. Our hobby is like that, makes the brain stay flexible.

@AtholIronworks 8 ай бұрын

I love this! Doing without and making it happen anyways is a real positive message for folks to see !

@mikevansickle2735 8 ай бұрын

That's a pretty cool example of how a simple improvised set of tools can still create useful things! Thanks for bringing us along and taking the time to break it down to Ye Olden School!

@BlackBearForge 8 ай бұрын

Glad you liked it!

@ImaLurkin 8 ай бұрын

That was an awesome demonstration of the absolute basics. Thanks!

@BlackBearForge 8 ай бұрын

Glad you enjoyed it!

@olddawgdreaming5715 8 ай бұрын

Where there's a will there's a way. Thanks for sharing with us John. That was show that it can be done.Stay safe around there. Fred.

@stephena1196 8 күн бұрын

This reminds me of something similar I did years ago on a camping weekend on a sheep farm. (The farmer had moved the sheep to a different field). There were different things you could try, one was forging a nail. The blacksmith used a hair drier and metal tube as you did, but used anthracite and a pit forge (hole dug in the ground) about the same size as your fire. It was really exciting, I was very pleased with my nail and showed it to lots of people there. I still have it. This reads like I was a child at the time, actually I was in my 40s.

@AmericaPatriot 8 ай бұрын

Great video, my forge is like a combination of this and the $500 set up. I have the 66lb anvil and a charcoal forge made from an old tin firepit, a hairdryer, small trailer wheel, break rotor and some other junk welded together. I love using charcoal.

@billssmithy7352 8 ай бұрын

My first forge was a Box-O-Dirt forge. A frame salvaged 2x4s, filled with dirt, a fence post for the pipe, and "Goodwill" hair dryer which lasted 2 years. I already had a ball peen hammer.

@quintonrowan9886 8 ай бұрын

So nice to see the different ideas of how to get started. The bouncy house blowers may be a bit much for air supply but before building my gas forge I built a coal forge and used an old air mattress blower for my air. I ordered a simple rheostat on Amazon for about $7 to control the speed. It actually worked great. Blacksmithing is such a satisfying activity even if you don’t want to make a living at it and we need more people who have these timeless skills. John thanks for teaching such a valuable skill. I hope you never stop!

@WYO_Cowboy_Joe 8 ай бұрын

Actually, an old sewing machine foot pedal can be an ideal set up for controling the flow of air and it frees up a hand.

@columjevens4612 8 ай бұрын

Brilliant , should be very valuable for starting off or someone doing a particular project needing some bending . Thanks👍

@lukiatiyah-singer5100 8 ай бұрын

Thanks for bringing back fond memories. It's almost exactly the same setup I came up with in my parents' garden when I was 11.

@z0mb13h0rd3 8 ай бұрын

John, I love this video for the fact it removes the barrier of entry for many people. $500 is still a tidy sum of money for many, and flea markets/garage sales/Craigslist, you can find most of this cheap, if not free on the latter. Thanks a million, -John

@williamlott7612 8 ай бұрын

I started out with a charcoal forge but built it from two cultivator disks connected by 2” pipe. I plugged bottom of the pipe, welded a pipe tee in the 2” pipe for an air connection, and welded a piece of plate drilled with air holes over the pipe connection in the top disk. I used this setup until I build my first gas forge and it works well. It does use a lot of fuel. Darlington, South Carolina

@billf9526 8 ай бұрын

Goes to show a true craftsman can use anything and create something. Thank you for sharing this!

@totheleftrightla 8 ай бұрын

I love the straight forward common sense knowledge way of going about things.

@OGfrenchy1986 8 ай бұрын

Great video! Definitely an easy way to get into the Hobby. That is how I started as well with a little dugout hole in my backyard!

@andresaofelipe 8 ай бұрын

I have forge welded in a setup like that one. If you put some thought into the brick configuration you can achieve some surprisingly hot flames

@russmitchellmovement 8 ай бұрын

That's absolutely brilliant, and in my garbage clay soil I bet the sledge would stay even more nicely.

@kuriakos 8 ай бұрын

Kind of comforting to know how to do an improvised forge in case you end up in a jam!

@RandoGringo 8 ай бұрын

Just sent this video to my best friend that wants to get into blacksmithing on a budget. Thanks man!!

@moreybandel5560 8 ай бұрын

This is a good idea! I remember when I was getting interested in blacksmithing, I did something similar to this... I made a forge out of an old brake rotor and set that into a 30gal 80/90 drum... I used exhaust pipe for the pipe. And, an old hair drier for the blower. I made my first S hooks doing this! Good info! Great video!

@user-br3ou2cs9o 8 ай бұрын

Simple, low-cost and functional ideas. Thanks BBF. 👍🏻😎 🏠🔥🚒 Well Chief.. there's was this blacksmithing guy I watched on KZfaq.. Well yes Chief.. admittedly I didn't take time to watch the rest of the video until AFTER I became "that guy" which he mentions towards the end of the video... 😄😄

@raydall3734 8 ай бұрын

my first forge was similar. I have clay soil. Built a mound of dirt up 4 feet tall and 3 feet in dialmeter. Used a very large hammer strapped to a tree stump. Burned charcoal. Worked great.

@bradchugg8915 8 ай бұрын

Thanks John. I have had the desire to forge metal as home on the farm in Northern Alberta dad had a forge set up on a stand that he used charcoal in. I remember the hand crank blower and how we go to crank it. I have purchased a cheaper anvil from Princess auto and you have rekindle my desire to beat on hot metal. Thanks.

@avisdaniels6194 7 ай бұрын

Thank you for proving that this type of setup will work for simple purposes for those that can't afford the best blacksmithing tools but still want to get into it!

@larrybreuer4495 8 ай бұрын

Keep It Simple! Brilliant!!! 👍👍❤️

@TheBrushcutter 8 ай бұрын

If you need more airflow, moving the hair dryer back so there is an air gap around it allows more air to be pulled into and forced through the tubing. I think I used nuts off 5/16th(8mm) bolts on mine. But that is dependent on the size of the hair dryer and tubing. Love this video, it very well demonstrates that we aren't limited only by our imagination but also the motivation to actually get down to doing. And burn bans. Like me right now. In Louisiana, outdoor forge and statewide burn ban. But I'm good with that until the temperatures drop below 90. In fact I'd prefer they were below 60, or even 50. Lol

@farsalor2627 8 ай бұрын

Just outstanding!

@walte99 8 ай бұрын

Great video! I made a forge from an old kiln that was missing the electrical parts, so I have not needed coal and I can't confirm, butI believe that Tractor Supply stores may sell coal for farriers. I'm thinking that would produce a much hotter fire and shorter heat times.

@jeaves8131 8 ай бұрын

Thanks for the inspiration John 😊 I’ve always wanted to try blacksmithing and I feel like this is finally a push to get started!

@Jason-jd1jv 8 ай бұрын

That was an absolutely beautiful frankenforge setup. I've seen other people do these sort of videos but most of them made S hooks or something small with them. I can't remember seeing anyone make a functional tool with one of these setups. My first forge was a wok that I sat in a brake rotor on top of a tube type diner table leg with a piece of copper tubing ran up the inside of it attached to a shop vac with a dimmer switch attached to it so I could control the air. It was an ugly setup but it worked as well as the shop forge I have now, just not as efficient.

@maniacalmank6261 8 ай бұрын

Been on a binge of your channel lately. I have always thought smithing was incredible and way outside the boundaries of my skill. But your videos I caught within the last 2 months that I finally bought material to make my own forge, however I opted for the gas burner for my forge, shout out to the @KyleRoyerKnives channel for that idea. Thank you so much for sharing your knowledge the way you do.

@BlackBearForge 8 ай бұрын

Glad you enjoy it!

@kathyskaggs4154 8 ай бұрын

This is exactly how i got started forging! On a campfire actually… and it took a lot of wood and great coals for the heat.

@WordsOfWarning 8 ай бұрын

Thank you so much for presenting these "dirt cheap" option scenarios. This kind of video helped me get over the intimidation factor and start learning.

@BlackBearForge 8 ай бұрын

Glad it was helpful!

@nicholas_obert 8 ай бұрын

My first forge was made out of a diy sheet steel barbecue and a hair dryer. It could get so hot it was able to melt steel.

@milosalisbury1593 14 күн бұрын

Good man! I love how simple youve made this to show us that there are so very few limits to starting this skill!

@williamhowells2059 8 ай бұрын

This is a great idea for when i run out of propane, thank you.

@ultimatepiro 8 ай бұрын

I'm almost ready to start, just some weeks and I got everything I need.. the story will tell my beginnings were humble and minimalist. Every time you said, "in a hole in the ground", I couldn't avoid finishing the phrase with "there lived a hobbit"😂.. TY my friend

@stevemoore5053 8 ай бұрын

Not making light of your video, but as simple as it is , it is a brilliant idea ! 👏

@JacksonDunnoKnows 8 ай бұрын

My very first forge was similar. I used an old cheap standing fire pit, drilled a hole in it for a pipe. Built a "trench" out of bricks and used a mattress pump. Put some steel or more brick under the pipe so the cast iron dont melt and bottom out the fire pit. Worked great for a year.

@lukyguy1240 8 ай бұрын

I've been doing exactly this for 2 or 3 years now. It's pretty cool. I got a book that says most of Europe moved on to smithing upright in the 1300s, but I'm just fine being behind the times! They still do it this way in Southeast Asia.

@threeriversforge1997 8 ай бұрын

Exactly. I like to remind people that the Sutton Hoo Hoard, Mastermyr Find, and every other "amazing" work from our ancestors was made using tools as simple as that. The sledge anvil is probably the biggest anvil you'd find in ancient Europe outside of stone anvils, and being hardened steel means it's an order of magnitude better. If those guys back then could forge great wonders with what we would consider rudimentary tools, there's nothing stopping people from doing the same today. It's all about patience and perseverance.

@steveculver6670 8 ай бұрын

I built something like this about 6 years ago. I made mine about 3 feet long, and used split firewood. I built a fireplace great out of 1inch round stock. Made 45 and 90 degree bends by hand

@terrycarwile6499 8 ай бұрын

Good educational content, once a smith understands the fundamentals, the road to improvement is open. Very good outline of the basic process, sir.

@SamuelMcCunemusic 8 ай бұрын

Exactly how i started, now i have built several forges and purchased a 100# anvil. Great way to get started though thanks for sharing John!

@user26344 8 ай бұрын

Always love to see these “you can do it too” videos. Great video and great commentary

@Drungra 8 ай бұрын

Did this exact thing in my parents backyard when I was 16 with a big chunk of 1/2 inch angle iron as my anvil and a small short handled sledge as my hammer. Warmed up my steel in a Walmart fire pit and used a leave blower with some maple to just barely get enough heat to make some rings out of an old chuck of steel pipe. It was brutal, but I had a lot of fun doing it with my mate

@justincase5228 8 ай бұрын

Thank you. I lost my job last summer and haven't found employment since then. I'm not on government subsistence so I don't have the money for expensive tooling. And yet, even so I'm building and renovating something at my place almost every day. I plan to forge and smelt and weld and construct in all sorts of projects. I'm not letting poverty keep me from building my dreams.

@BlackBearForge 8 ай бұрын

Best of luck. Blacksmithing can help pay the bills once you're comfortable making simple items.

@grampsizzakilla7981 8 ай бұрын

Fascinating how much can be achieved with a simple set-up. The skill of the craftsman shines brightly even when the tools are as crude as it gets.

@HugoNordic 3 ай бұрын

This approach is so similar to the way i approach practical things. I am glad to see others having the same approach 🎉

@glebtcheslavski1085 8 ай бұрын

John, thank you for this video! I was also using a heir dryer but then switched to leaf blower as the air source. 🙂

@BlackBearForge 8 ай бұрын

Did it work well?

@A4amad3us 7 ай бұрын

I’m a 17 year old looking to get into blacksmithing for myself, and may god bless you, honestly !!

@SammyGDude Ай бұрын

Wow. This is really one of the blacksmithing videos of all time. That is hands down one of the methods ive ever seen.

@acrussell1959 8 ай бұрын

Oddly enough the "Dirt Box Forge" which is kind of what you are showing is my primary forge (or a variation of that). I'm retired and do some blacksmithing just for fun. I can't afford to spend serious money on this. I have a 2 by 4 wooden frame, clay brick and plumbing fittings for the forge. The blower is an old electric motor, some scrap plywood I found, and fencing material glued and screwed together. I was given a junk Peter Wright anvil and I found a bent-up sprung leg vise that I've bent back into alignment. The vise mounting hardware and return spring are all made from rebar I had sitting around. Still I can easily reach welding heat and do some reasonable work. All together I have roughly $200 in the whole set-up. Will I ever be a professional blacksmith? .....No. However, enjoyment in the shop, in retirement, has been achieved. A young man could take this much further with very little money. With a little imagination, you can have many, many hours of enjoyment.

@fredcrews7401 8 ай бұрын

This. Absolutely this. I have low level followed you for a while now but never paid that much attention because I thought I could never afford an anvil, let alone anything else. This is just brilliant. Thank you so much

@phillean 8 ай бұрын

A great video to encourage people to get started.

@LemmyAuditYou 8 ай бұрын

Thanks for sharing such a simple way to get started in forging.

@peltiereric6497 8 ай бұрын

This is almost identical to how I started years ago except I used a leaf blower and the forge was built on an old yard wagon/ trailer that I could move around and many of my anvils were actually tree stumps from my recently logged property, I just shaped the stump with a chainsaw close to what I wanted and then could hammer out hot sheet steel from the forge to the desired shape for a welding project

@TheHookBoy 7 ай бұрын

Anyone complaining about anything you’ve done in this video just wants to complain. Well, except for my one complaint: in a short video you proved any excuse I could dream up about not being able to start learning at home is just a silly excuse. Thank you for posting this inspirational video and backhanding the hell out of me.

@BlackBearForge 7 ай бұрын

There are those that just love to complain. Glad you enjoyed it.