I appreciate you keeping the wrench goof in the vid. It helps show us average joes can do it no prob.
@Georgia4Low2 жыл бұрын
Your welcome! Average Joe here!
@paulbeseth60583 жыл бұрын
Thanks for the great video! Replacing my rear shocks was probably the easiest project on my 2009 JK so far after watching this video. Now on to the front shocks.
@Georgia4Low3 жыл бұрын
Awesome! Glad I could help and thanks for watching
@CuHead13 жыл бұрын
I installed RS9000XL on a 2010 Ram 3500 DRW. I have a 3500# camper in the bed. I set the shocks to 9. Works great. I also use a Hellwig Big Wig Rear Sway Bar. Those two things really calmed down the ride.
@Georgia4Low3 жыл бұрын
That’s great to hear!! Thanks for watching
@cello4ever854 жыл бұрын
nice install, we love our rancho xl shocks, I fiddle with the settings on our 2003 Sahara all the time, we have a 4.5" long arm lift, we keep them at #5 setting most of the time😁
@Georgia4Low4 жыл бұрын
Thanks for watching, I've been running mine on 4-5 setting and down to 2 for offroad. I like them alot.
@1j007zm3 жыл бұрын
Thank you sir!, great video, now I'm going outside to install my new Rancho rs5000x shocks on my 07 wrangler
@Georgia4Low3 жыл бұрын
Awesome. It’s an easy task for sure. Thanks for watching
@roncassar7310Ай бұрын
Thanks for sharing and I like the additional recommendation for the shocks.
@Georgia4LowАй бұрын
Thanks for watching
@erikdanebrown23052 жыл бұрын
Thank you for the information . Great video just changed out all four shocks on a 2007 wrangler. Would never have attempted without your help and I only watched this video perfect!!!!!
@Georgia4Low2 жыл бұрын
Thank you, so glad the video helped.
@phrogusmc4 жыл бұрын
Ordered these for our '15 JKUR a few days ago. Good video, and 5 was where I was thinking of setting them to start. They're going on a mall crawler to replace a set of basic RC shocks that feel worn out at 30k miles.
@Georgia4Low4 жыл бұрын
Setting 4-5 makes for a great on road ride and 1-2 works well for most of my offroad stuff. Thanks for watching
@jayba43452 жыл бұрын
That was way easier than I thought it would be. I would have taken it in. I can totally do that.
@Georgia4Low2 жыл бұрын
Yes I have faith in you to do it yourself and save some money. Thanks for watching
@johncallahan47783 жыл бұрын
I enjoy you channel as anew jeep owner
@Georgia4Low3 жыл бұрын
Thank you for the support. I’m still pretty new at this myself.
@lonniegreenough21522 жыл бұрын
I found leavin the bands on helps with the install of a lot of shocks , I'm throwing on some KYB's for now . Great video ✌️✌️
@Georgia4Low2 жыл бұрын
Thanks for watching. Yes leaving the bands on until install does help.
@rick4649 Жыл бұрын
I’m installing Rancho shocks on my 2017 JK. This vid was a great help. Thanks for sharing your info.
@Georgia4Low Жыл бұрын
Thanks for the support and for watching
@antlese3 жыл бұрын
Fantastic demonstration man. Will be buying these shocks for my JK soon. Thanks!
@Georgia4Low3 жыл бұрын
Thank You!!! I think you’ll be very happy with them.
@danaross64092 жыл бұрын
Simple & easy explanation of task. Thank you.
@Georgia4Low2 жыл бұрын
Thanks for the support and for watching
@rodk3403 жыл бұрын
Getting ready to replace my second set of Rancho rs9000xl shocks on my 2003 3500 silverado. Watched your other video on how to apply waterproof grease to the adjusting knob. I'll do that before install on all 4 shocks. Thanks for the video as it sure helped me. I carry a 2004 Lance 1161 and these adjustable shocks are great for that. I see Rancho now offers in cab adjusting for these shocks.
@Georgia4Low3 жыл бұрын
In cab adjustments would be pretty cool. Have you seen this adjustment tool? kzfaq.info/get/bejne/i7Gcf5ppp8Cxc4E.html thanks for watching
@rodk3403 жыл бұрын
@@Georgia4Low just ordered 2 red tools 👍
@Georgia4Low3 жыл бұрын
@@rodk340 awesome, they work great!!!
@wallyworld16333 жыл бұрын
Great Video. Great Job. Ill tackle this mother this weekend!
@Georgia4Low3 жыл бұрын
Thank you, it’s super easy really.
@patriciatotaro34822 жыл бұрын
Thank you for this video. Rancho provides No instruction for the Rs9000 shocks. Other gas shocks I have installed were shipped with a strap keeping them compressed, These shocks were compressed without a strap. Thinking I got bad shocks I called Rancho and found out the following: INPORTANT: These shocks are shipped compressed. THE SHOCKS NEED TO BE RELEASED. When installing the FRONT shocks, mount the the lower mount first. Then Install the boot and the top lower bushing, pushing the metal bushing washer all the way down to the nut on the upper stud, and make sure the larger bushing lip on the bushing is facing the shock tower. Then using a 11/32 or 8mm wrench on the top of the threaded upper mounting stud, turn the stud counter clockwise 3/4 of a turn or so until it un-compresses completely and guide the upper stud through the shock tower mounting hole while the shock expands. REAR Shocks: Install the top first then twist the shock body counter clockwise to un-compress the shock and guide it into the lower mount. Please add this to your video or at least in your comments.
@Georgia4Low2 жыл бұрын
Those are good install tips. I needed to install the front rubber boots so I just released them and let them extend. Thanks for watching
@christophertuggle16613 жыл бұрын
Thanks Arthur! I am putting these on my 2015 JKUR soon! Happy New Year and safe Jeepin
@Georgia4Low3 жыл бұрын
Thanks for watching and Happy New Year!!!
@picklejuice783 жыл бұрын
just got mine last week now to find time to get them on
Thank You for the video sir. Appreciate it greatly. 😀👍
@Georgia4Low3 жыл бұрын
Thank you for watching sir!!!
@freshh91 Жыл бұрын
Easy breezy bro thanks for the vid.
@Georgia4Low Жыл бұрын
thanks for the support
@nealsedgwick2 жыл бұрын
Thanks for the video...very informative.
@Georgia4Low2 жыл бұрын
Glad to help. Thanks for watching
@justinwaltman94224 ай бұрын
Thanks for the video! Do you still prefer the Rancho since this video?
@Georgia4Low4 ай бұрын
Yes I do! but have since upgraded to the Rancho RS7MT series, never really used the adjustable shocks that much.
@DoughertyFarmsCT3 жыл бұрын
Thanks for the walkthrough 👍👍
@Georgia4Low3 жыл бұрын
You’re welcome.
@williamjonsson71426 ай бұрын
Can’t believe I payed a mechanic a couple hundred to do this never again lmao
@Georgia4Low6 ай бұрын
Yeah it’s pretty easy. Thanks for watching
@markbisdak3 жыл бұрын
Would u recommend this over fox?? I have a 19 jl i mostly use it as a daily driver but of course some light off roading.
@Georgia4Low3 жыл бұрын
I think for the money these are perfect and perform great. If budget is not an issue then you have plenty of other options. These RS9000XL are kind of like the high end of the middle of the road shocks. Hope that makes sense.
@chodson65 Жыл бұрын
Excellent video..
@Georgia4Low Жыл бұрын
Thanks for the support
@danielvolker17394 жыл бұрын
What did you end up settling the adjustment at for on-road riding? Also, how do they ride compared to the Bilsteins? Thanks!
@Georgia4Low4 жыл бұрын
Currently have only done mild forest Service Roads and setting on number 4 worked great. I normally been running them on 4-5 for pavement use. So far I like them over the Bilsteins as they were way to stiff and harsh for on and off-road. Jeep has been down for a few weeks due to axle leaks and I’ve been ordering gear sets and lockers, soon to go in the shop. After that I’m headed for some more technical stuff and get some info out there. Thanks for watching
@pierrebecnel89654 жыл бұрын
Great instruction. BTW. Bought mine at O’Reilyo’s. Same price as Quadratec. .
@Georgia4Low4 жыл бұрын
Thank you again for the support. Didn’t even think about O Reilly’s
@tjeffers992 жыл бұрын
Appreciate the great video.
@Georgia4Low2 жыл бұрын
Thank you for watching
@thomaswhite5928 Жыл бұрын
Great video.
@Georgia4Low Жыл бұрын
Thanks for watching, please share the video
@daltonlazarus27863 жыл бұрын
Awesome vid! Thank you!
@Georgia4Low3 жыл бұрын
Thank you and thanks for watching
@blakescorsone49584 жыл бұрын
Hey man, how are you liking the Rancho shocks still?? I’m trying to decide between ranchos and the fox, but your videos making me lean towards ranchos... how do you like them after what looks like a couple months???
@Georgia4Low4 жыл бұрын
They have been performing well, only light trail use at this time. Jeep is in shop getting gears and lockers. I like being able to tune the ride and the price is perfect. I got plans to really do more technical trails very soon. Big improvement over the Bilsteins I had.
@deifor4 жыл бұрын
@@Georgia4Low did you get the lockers?
@deifor4 жыл бұрын
I guess he should like them since they are at least half the price of the Fox
@Georgia4Low4 жыл бұрын
Yes Yukon Grizzly Lockers front and rear.
@Georgia4Low4 жыл бұрын
For the money they are performing well for sure. Good street and off-road manners. Thanks
@AngelHernandez-yb3lf3 жыл бұрын
Great video 👌🏽👌🏽‼️
@Georgia4Low3 жыл бұрын
Thank You!!
@ryanbutt51823 жыл бұрын
Thank you for the video.
@Georgia4Low3 жыл бұрын
You’re Welcome and Thank You for watching
@moneyfilters87064 жыл бұрын
How hard was it to install passenger side shock.. it seems like at the top there is barely any clearance for the wrench..😳
@Georgia4Low4 жыл бұрын
Easy since I don’t have factory fender liners. I’ve seen where some people trim the factory liner to make it easier. This is a very simple job for anyone. Thanks for watching
@kylewilson89423 жыл бұрын
@@Georgia4Low my 2012 wrangler was a nightmare, on passenger side. Removed everything I could and there is still 0 clearance for anything ended up busting the rigid plastic under the fuse box and still can barely get anything onto the nut. Any suggestions?
@Georgia4Low3 жыл бұрын
@@kylewilson8942 sorry wish I was able to see the issue. I didn’t have nearly any issue as my stock fenders and liners were removed. Mine was pretty straight forward.
@michaelmccormack63582 жыл бұрын
I trimmed the plastic just about the shock well to access the nut easier. Also, when putting the new shock on, I put the bushing and washer on top of the well, pushed the shock bolt through then held the nut above it with my fingers. I twisted the shock and held the nut in place to get it started. Worked like a charm.
@ericzeigler86693 жыл бұрын
Did your Rancho shocks come with a white plastic piece that keeps the shock in the compressed position? I think I was supposed to cut the plastic after installing the top of the shock. It would have saved my left nut trying to push the shock up to get the bottom in the frame mount. Any comments?
@Georgia4Low3 жыл бұрын
Yeah mine did but I did the same as you. Thanks for watching.
@shawnpendleton17462 жыл бұрын
I have a 2016 JKU...is it necessary to replace the springs as well, or just the shocks? I am just trying to get a better ride on everyday driving and improve performance on regular jeep trails, no rock climbing or anything. Currently all is stock on the jeep.
@Georgia4Low2 жыл бұрын
The springs last for a very long time in most cases. Springs will “sag” causing the Jeep to become lower. Shocks wear out a lot quicker than springs.
@user-nz6oc2oh5y3 жыл бұрын
I had the rancho 9000xl shocks installed on my 2006 f150 and they will not adjust more than 1/4 turn. Removing the adj knob it turns fine. Greased the threads, it turns fine. Installing it back on with the screws tightening a bit at a time they adj less and less and when the screws are tight, 1/4 turn is the most i can adj them.
@Georgia4Low3 жыл бұрын
Did you find rust/corrosion inside? The plunger that the knob pushes against is stuck likely.
@user-nz6oc2oh5y3 жыл бұрын
@@Georgia4Low no, shocks are brand new.
@Georgia4Low3 жыл бұрын
@@user-nz6oc2oh5y the adjustment knob can be very tight/stiff to adjust by hand. Have you seen the adjustment tool? Anyways they carry life time warranty.
@user-nz6oc2oh5y3 жыл бұрын
@@Georgia4Low i have ordered one. How would i know if the shocks are defective, brand new out of the box, or if the adj.knob is just stiff. It turns fine off the shock. Wait for adj tool i ordered and fing out perhaps. Most people seem to say it turns like butter. Others, very stiff.
@Georgia4Low3 жыл бұрын
@@user-nz6oc2oh5y wait til the tool arrives. Mine have been stiff since new and kind of hurt my fingers to turn them. The tool is amazing. Let me know
@therusticaztec56653 жыл бұрын
Awesome video brah! Thanks. I'm going to replace mine. Can you tell me what size shocks i need if i have a 2 inch lift?? Please advise.
@Georgia4Low3 жыл бұрын
Hey visit Rancho’s web site and when viewing these shocks it tells you which shocks are for certain height lifts, super easy. Thanks for watching
@therusticaztec56653 жыл бұрын
@@Georgia4Low Will do. Thank you friend.
@SupaMan002 ай бұрын
Does this shock need to be installed with any type of kit , or can it replace the stock shocks.
@Georgia4Low2 ай бұрын
It can replace stock shocks, just check Rancho's web site for fitment and different shock lengths
@SupaMan002 ай бұрын
@@Georgia4Low Thank you! 👏🏿🙌🏿
@vedranjerkovic29512 жыл бұрын
What size did you get? I am also trying to replace all 4. Looks like they only have ones for 4in front lift and 3.5in rear. Is that what you got?
@Georgia4Low2 жыл бұрын
Mine are 3in for the front and 3.5in in the rear.
@bigmuthafooka Жыл бұрын
Just ordered the Rancho RS5000X, do I need to have the Jeep lifted for any reason other than to have easier access?
@Georgia4Low Жыл бұрын
Not really but lifting it does allow you move access to get under and position yourself.
@wesgough1703 Жыл бұрын
I just purchased these shocks. On the rear I turned them to extend the shock but I’m having problems with the fronts. They won’t fully extend by themselves. Did you have this issue?
@Georgia4Low Жыл бұрын
I had no issues. Try pulling out on the shock shaft, I do remember I had to work each shock in and out by “hand” by pushing down on the shock shaft to compress them and let them extend by themselves a few times to get the fluid moving
@wesgough1703 Жыл бұрын
@@Georgia4Low yeah I called Rancho and they said to prime the shock. I’ve been messing with this stuff for hours trying to get it to work haha. I think they just are faulty! Good video btw, I’ve watched a couple of hours
@Georgia4Low Жыл бұрын
I may have primed the shocks 2-3 times each and everything was good. Odd that you have two defective shocks and both are fronts. Rancho or the retailer should replace them I hope. Thanks for watching
@Georgia4Low Жыл бұрын
Try this. Place the adjustment knob on lowest setting, place one end of the shock on the ground and push the other in all the way end and then release it, repeat that a few times. You likely have already done these steps I’m sure.
@simoncox31034 жыл бұрын
Did you jack the jeep up a little to relieve any pressure or can you do it all without a jack?
@Georgia4Low4 жыл бұрын
No jack was needed for the rear, I used a jack for the front just to give me a little more room under the Jeep. Thanks for watching
@elireese25654 жыл бұрын
My ranchos came with a plastic cord holding them compressed. I wanted to cut the cord to hit them with some paint but i dont know if that will make it impossible to install them?
@Georgia4Low4 жыл бұрын
I installed mine without them being compressed, makes it a little harder to install but completely doable. Thanks for watching
@markstalnaker34513 жыл бұрын
Thank
@Georgia4Low3 жыл бұрын
Thanks for watching
@triodad333 Жыл бұрын
I see you installed the boot up and the bilstein you had the boot side down??
@Georgia4Low Жыл бұрын
The Ranchos were just configured differently and needed access to the adjustment knobs.
@AlaskaErik4 жыл бұрын
I can't emphasis how important it is for you to inform your viewers at the beginning of each video what year and model Wrangler you have, especially since yours is so modified. This video is only of value to someone who has the same type as you have. From looking at your first video I learned you have a 2015 JKU. But what did it start out life as...Sport, Sahara or Rubicon? Earlier JKs have the 3.8L engine, newer ones the 3.6L. Rubicons have a different front axle and transfer case than the Sahara and Sport do. And now the JL is out. So please let viewers know exactly what kind of Jeep you have.
@Georgia4Low4 жыл бұрын
AlaskaErik thanks for watching... yes those are all great points and I left some details to be assumed. The Jeep started lift as a Sport model. Thanks again for the tips.
@erikandersen6414 жыл бұрын
Pretty much says what it is in the description. "Hope you enjoy the video on how to replace shocks on your 2007-2018 JK Jeep Wrangler."
@Georgia4Low4 жыл бұрын
@@erikandersen641 yes indeed, thanks for watching
@mars77863 жыл бұрын
Do you Like them more than the bilstine 5100 cause that's what i just ordered how long did you have the bilstine onn
@Georgia4Low3 жыл бұрын
The Bilstine shocks worked great overall and they had probably 50,000 miles based off information I got from original owner (I’m 2nd owner of the Jeep) I put 10,000 miles on the Bilstines before replacing. I thought the Bilstines were a little stiff/harness. The Rancho’s are performing great and I prefer the ride much better.
@adananguiano20313 жыл бұрын
How do you like these over the bilstein so far? I was looking at the bilsteins but maybe the ranchos could be better
@Georgia4Low3 жыл бұрын
I like these better. The Bilsteins were very harsh riding. Plus the Rancho RS9000 can be adjusted to your ride preference. Thanks for watching
@adananguiano20313 жыл бұрын
@@Georgia4Low so ranchos are smoother for daily driving
@Georgia4Low3 жыл бұрын
@@adananguiano2031 yes
@chodson65 Жыл бұрын
Hi, I have a stock 2020 Sahara JLU. I won't be getting a lift, however I will be towing 3,000 lbs. What shock upgrade would you recommend?
@Georgia4Low Жыл бұрын
Your stock shocks may perform just fine, I’d tow with them first. 3k lbs is not a lot of towing weight, I suspect aftermarket shocks may not even be required.
@chodson65 Жыл бұрын
@@Georgia4Low Thanks, do you like the Rancho over the 5100's?
@Georgia4Low Жыл бұрын
Yes, the 5100 were way to stiff. Loving my new Rancho RS7MT shocks right now.
@chodson65 Жыл бұрын
@@Georgia4Low they look interesting. Basically set around a 7 as compared to the 9000xl. Looks like a better quality, no adjustments and the exterior is supposingly more rust resistant. The price is extremely good.
@Georgia4Low Жыл бұрын
I liked the RS9000XL shocks and thought I would use the adjustments more but once I got them set I never touched them again. One reason I went with the new Rancho RS7MT shocks
@robertfrancisco11933 жыл бұрын
how did you find dial no# 4 for your ride. i like a firmer ride on my 2 door willys.
@Georgia4Low3 жыл бұрын
Setting 4 I thought rode great. Settled on #5 which seems to be in between soft and firm.
@chadmiam2 жыл бұрын
Quick question, I was in the process of swapping out my shocks and noticed top bolt front drivers side somehow got bent, can't get the nut off. any ideas?
@Georgia4Low2 жыл бұрын
Wow! Can you get a cut off wheel or a saws-all in there to cut the shock shaft?
@chadmiam2 жыл бұрын
I tried an angle grinder and not even close. if I cut the shaft as far up as I can, will it pull thru the top? I was trying to cut it right under the bend so I could get the nut off still. wasn't sure if a saws-all would cut thru the bolt if I could even get it in to try.
@chadmiam2 жыл бұрын
@@Georgia4Low BTW how's the shocks doing I actually got the same shocks and ready to get them on as soon as I get this figured out... Thanks for the video it definitely helps and saved me over 1k to have someone else put them on
@Georgia4Low2 жыл бұрын
@@chadmiam the shocks work great and have been great. I’m replacing them with the new mono tube Rancho shocks this week. Just because…
@Georgia4Low2 жыл бұрын
@@chadmiam man that’s a tough repair. I bet a saws-all can cut off the top part of the shock shaft we’re the bushings are at just above the shock tower mount.
@antonioasuelo73992 жыл бұрын
Mean beard and mean haircut lol
@Georgia4Low2 жыл бұрын
lol Thanks for watching
@magcv922 жыл бұрын
Hey, did these rancho 9xxx performed better than your old Bilstein? Thanks in advance for your reply 🙌🏽
@Georgia4Low2 жыл бұрын
Yes they did. The Bilsteins were just way to harsh feeling. Put these on 1-3 setting it’s like OEM ride.
@larrytsai57872 жыл бұрын
Where under the Jeep did you use as jack points?
@Georgia4Low2 жыл бұрын
Main frame rail on each side is best. Thanks for watching
@queensapphire77178 ай бұрын
Don’t know why anyone would pay a mechanic to do this, simple.
@Georgia4Low8 ай бұрын
Yes it’s super simple. Thanks for watching
@janillesloan61442 жыл бұрын
I have a 2010 Jeep Wrangler Unlimited (4 door, manual) and it has developed... the death wobble. I am guessing here, but this is probably the issue, so I'll see if I can find someone to do this for me. I dont have the tools to do it myself unfortunately -_-
@Georgia4Low2 жыл бұрын
Hi, if you have death wobble it’s not being caused by your shocks. The likely cause is worn out front track bar brackets or damaged front track bar. Worn out ball joints as well. Need to have a qualified 4x4 shop inspect the front end. Thanks
@janillesloan61442 жыл бұрын
@@Georgia4Low I appreciate that bit of information a lot! This will help when I start calling around. I should be back in GA in February, if she makes it that far!
@janillesloan6144 Жыл бұрын
@@Georgia4Low Turns out it was my steering stabilizer. Repair was completed (Savannah, GA) for around $198 (labor included!).
@spoorksnfoons53302 жыл бұрын
What kind of shocks did you buy for your Jeep?
@Georgia4Low2 жыл бұрын
Rancho Shocks
@kratosofwar61653 жыл бұрын
I bought the rs5000x for my wrangler and they do not fit at the shock mount, the seals are too thick, but on the website it says they do fit my jeep, I also tried some from duralast from autozone and same thing happen, can anyone recommend me some shocks will actually fit? Other wise I'm stuck with out a shock, my old one broke as I was taking it off.
@Georgia4Low3 жыл бұрын
I would contact Rancho directly and make sure one the shocks are correct. They have a great warranty etc. go that route before buying more shocks
@kratosofwar61653 жыл бұрын
@@Georgia4Low alright, I got mine from somewhere else but I'll return them and contact them.
@Georgia4Low3 жыл бұрын
@@kratosofwar6165 what year Jeep Wrangler?
@kratosofwar61653 жыл бұрын
@@Georgia4Low an 07
@Georgia4Low3 жыл бұрын
@@kratosofwar6165 Rancho web site shows RS5000 for your year. I’d send the one you got back and or call Rancho for help to confirm needed part numbers etc.
@Flerflandia4 жыл бұрын
How hard is replacing control arms?
@Georgia4Low4 жыл бұрын
Not hard at all. I did mine one at a time and using the stock control arm as a “base” setting for length. After replacing all four up front I had the front properly aligned. The job is easier with an air impact for loosing the hardware. If not you’ll need 1/2 drive sockets and a breaker bar. Thanks for watching
@workerbee23524 жыл бұрын
I want to upgrade the shocks myself like this but i dont havethe time or tools
@Georgia4Low4 жыл бұрын
If I wasn't filming I could have changed the shock in less than 1.5hr. Start building your tool box with what you need as it can save you some money down the road doing these repairs yourself.
@spoorksnfoons53302 жыл бұрын
My shocks on the rear are f***ed bounces to much in the back..
@Georgia4Low2 жыл бұрын
Sounds like time for new shocks. Thanks for watching
@philandrew36033 жыл бұрын
Best of luck everyone as soon as you get to the passenger FRONT.... Reasons to hate engineers for $500, Alex..... UGH
@Georgia4Low3 жыл бұрын
Yeah gotta love auto engineers. Thanks for watching
@Andrew-iq5ud2 жыл бұрын
Im having this problem right now its absolutely infuriating. How did you guys get the nut on? I cant even reach it. Absolutely ridiculous
@krod21625 ай бұрын
The wind noise doesn't bother me in the slightest. But people who say um all the time is just totally annoying to me. I'm sorry, maybe it's just me.
@Georgia4Low5 ай бұрын
Thanks for watching
@n8ibz12 жыл бұрын
Show the hard side, this side is cake
@Georgia4Low2 жыл бұрын
Humm,, I didn’t have really any issues on either side. Just be patient.
@wrenchingandwheeling15893 жыл бұрын
Same lame bar pin design in the rear. 😡 I can hear the snapped bolts years from now. Lol
@Georgia4Low3 жыл бұрын
Yeah for folks up north I bet it’s a pain in the butt. Thanks for watching
@robertware86438 ай бұрын
I wasn’t in the mood either
@Georgia4Low8 ай бұрын
Well, get in the mood and get your shocks replaced.
@robertware86438 ай бұрын
I’m going to put them in on Saturday. I already had it planned.
@Georgia4Low8 ай бұрын
@robertware8643 nice. Good luck with the repair.
@robertware86438 ай бұрын
Well, I got them all in all four the lift on my jeep made it so much easier to get the job done. I didn’t have to use a jack.
@Georgia4Low8 ай бұрын
@robertware8643 awesome job!
@bigxbudxbudda2 жыл бұрын
What a downgrade.... bilstein to rancho 🤮🤮🤮
@Georgia4Low2 жыл бұрын
To be honest the Bilsteins rode to harsh. I’ll be installing the all new Rancho series shock soon as well. Been happy with them. Thanks for watching