How To Build Your First Fabrication Project

Рет қаралды 670,259

4 жыл бұрын

Today on Dirt Lifestyle, we are building your first fabrication project! I'm going to go into more detail on this project for those of you that are brand new to metal fabrication.
This video is for someone that has been practicing welding and is ready to start their first project. It's likely that your early projects will be bumpers, fenders or sliders. In this video I'm going to build some steel fenders for my car trailer but these basic principles can be carried to just about anything.
Don't get discouraged! Fabrication is fun and it doesn't need to look incredible! I just needs to be functional!
Thanks for watching 👊
AMAZON ITEMS!!! www.amazon.com/shop/dirtlifes...
(Amazon Affiliate Links)
BARNES 4WD COUPON CODE: "dirtlifestyle" 10% off
NORTH RIDGE 4X4 CODE: "dirtlifestyle" up to 20% off www.northridge4x4.com
EMPIRE ABRASIVE CODE: "dirtlifestyle" 10% off lddy.no/qf79
YANKUM ROPES CODE: "dirtlifestyle" bit.ly/yankumDL
ONX MAPS: webmap.onxmaps.com/account-pu...
MIDLAND RADIOS: bit.ly/2IjmlZD
STEP 22:
EVOLUTION POWER TOOLS CODE: "dirtlifestyle" store.evolutionpowertools.com/
JOOLCA HOT WATER HEATER: bit.ly/37qLgEp
Shirts & Hats on our website!!
www.thedirtlifestyle.com
Support us on Patreon! / dirtlifestyle
Follow me on social media!!
Instagram: / dirtlifestylenate
Facebook: / dirtlifestylenate
DISCLAIMER:
Due to factors out of the control of Dirt Lifestyle, we cannot guarantee against improper use or unauthorized modifications of this information. Dirt Lifestyle assumes no liability or responsibility for property damages or injury incurred as a result of any information contained in this video. Use this information at your own risk. Dirt Lifestyle recommends safe practices when working on vehicles and/or with tools seen in this video. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Dirt Lifestyle. Be safe!
This video and description contains affiliate links, which means that if you click on one of the product links, I'll receive a small commission.
#fabrication #welding #howtoweld

Пікірлер: 499

@contemporaryprimitiveman3469 4 жыл бұрын

My first fab project was a welding table. My third was a bigger welding table.

@rodigopizarro9414 3 жыл бұрын

😂😂😂 I know how that one went. “Yay I got my first table” * makes something on table “I need a bigger table”

@dilly_dallys 3 жыл бұрын

Lol

@toddbuh 3 жыл бұрын

what was number 2 ?

@dram340 3 жыл бұрын

@@rodigopizarro9414 how big was the first one and 2nd one

@jenniferwhite6089 3 жыл бұрын

wow that brought back members when i small they say i was 3 when i welded the hud on the old cockshutt tractor we had

@joemundy5064 4 жыл бұрын

Spent 45 years as a heavy duty truck tech and I learn something or see something of interest every time I watch one of your videos. Keep up the great job.

@snicklefritzd3612 4 жыл бұрын

Your welding play list should be called "sewing with FIRE!"

@DirtLifestyle 4 жыл бұрын

Lol I love it

@stickypaddle6432 4 жыл бұрын

stole it from that old tony fella

@willmorton6800 4 жыл бұрын

I'm just living vicariously through you. I don't have the tools or the money to buy the tools... Nor do I have a garage in which to do projects like this or to store said tools, if I could even afford them. LOL

@practacticaloutdoorsandthi6962 4 жыл бұрын

Starting out with not much to work with is ruff, that's how I started! I appreciate you showing it can be done working off the floor while you have a bench right there.

@jackmioff000 3 жыл бұрын

"Fill the void thats left over" okay drugs and women never did that but you taught me how

@scottsyellowrubicon1 4 жыл бұрын

Nice video. I’ve been welding for years but I’m finally about to buy my first plasma cutter. I’ve used one a few times years ago at a place I used to work for, but I am really looking forward to getting proficient at it. Keep the fabrication videos coming!...love em 👍🏻

@vanblindguy4600 4 жыл бұрын

On those large gaps I like to use a 10 penny nail . It's pointed so it fits right up into the hinge point too. Throw in some center supports and you got some drive over fenders.

@jaymond80 3 жыл бұрын

Coming from a wood working background and just about to buy my first welding machine so I can fix stuff on the farm. I can’t say how much I appreciate the “small stuff” explanations. Experienced folks take for granted stuff they know and it’s really helpful for us noobs. Thanks!

@sftwr314r8 4 жыл бұрын

I was a fabricator professionally for 15 years, but haven't done it since 2008. A few days ago, bought a welder and getting back into it!

@Lawmanbsi. 4 жыл бұрын

By far my favorite Jeep/Fab channel. Think the narrative and editing have a good flow and keep the interest going. 👍

@TheRightLine 4 жыл бұрын

Love it. I've been welding a while, not professionally but love watching these kinds of videos. Keeps the creative juices flowing. Thank you.

@McDaniel4wd 4 жыл бұрын

Another rad video man! Thank you for breaking everything down on the fabrication segments. It’s cool to see fab from this point of view.

@marcus2491 4 жыл бұрын

Thanks man! I'm a journey man plumber and I forgot I use to lay out using a chalk line on the ground. This just helped for me on my welding fab journey!

@LuisCastillo-lv7fk 4 жыл бұрын

I am glad to see this type of videos, where people do things for themselves so that the apprentices take confidence in them .... good job JKs.. excellent content

@johndowe7003 4 жыл бұрын

the bandsaw i a game changer, id recommend that for anyone that wants to get into serious fab work , got my Milwaukee for 180 from a pawnshop, looked like it was never used so it was good for me

@jonkwilloughby 4 жыл бұрын

Thanks man. This is exactly the kinda of info and demonstrations I’m looking for. 👍😃

@emeryrowand2903 4 жыл бұрын

Building stuff should be fun and creative. Great quote! thank you for all the help and guidance through your videos.

@007flyguy1 Жыл бұрын

Thank you so much for your videos and not sounding like a Chad, You explain everything and you really get things done. I see other welders that try and act like they know it all or like they're trying to compensate for something but you go slow. You take your time and you do it right. Thank you for showing us how it's done. I really appreciate your videos

@MagaRickn 8 ай бұрын

Excellent video! I'm 72 years old, and after being without a shop for 30 years, I finally built one last year. Videos like this are very interesting. And thank God for Harbor Freight!! ;) I bought a multifunction welder, plasma cutter, etc. I also bought a portable band saw, like yours, for my Son for his birthday. Harbor Freight now has a band saw bracket where you can fasten your saw to a table, or even the wall. Keep up the good work!! And thanks for your time.

@USNERDOC 4 жыл бұрын

Nate - as a new comer I want to thank you for this video. This level video is going to make you the go-to-guy for those new to fabrication. I really like your teaching style. Combined with your awesome videography this is the kind of content that is going to set up apart from everyone else in the space. Good luck and safe travels to California!

@williamstormoen140 4 жыл бұрын

Video was well worth while to watch. These kind of jobs are definitely the meat and potatoes of Fab work. My opinion everything you showed us will translate to other more complex projects. Now the trick is to be able to make more videos that build off what we learned in this video. Great job by the way 😀👍👍

@daytonmunk3128 4 жыл бұрын

I appreciate you taking the time and sharing that this is a functional item and not a a pretty gussied up item. Don't be hard on yourself and get discouraged to even try because that is exactly what I do and its nice to have a reminder to just do something the best you can and it will work out and you will gain the confidence and experience to build other things even better.

@DirtLifestyle 4 жыл бұрын

Thanks man! I appreciate it

@johnheiss9954 4 жыл бұрын

Thanks for the great, detailed video pointing out the small stuff. So helpful for those learning 👍🏼

@rile5960 4 жыл бұрын

Your hitting home runs buddy!

@10ken1958 4 жыл бұрын

Great video Nate. It's right at my level of experience. I'm looking forward to the next one.

@danielmeecham464 3 жыл бұрын

I'm currently looking forward very much to my first welding project. So I'm very appreciative of all the little extra tips you mentioned. Great video! Thanks for sharing!

@supravid6327 4 жыл бұрын

Great quality on these vids. Pro relevant b-rolls, streamlined editing, no ranting to the camera at one angle for 7 mins.. great

@DirtLifestyle 4 жыл бұрын

Thank you!

@StrainingDingelberry 4 жыл бұрын

I’m doing my first project this weekend. Maybe not fabrication but I’m putting caps on my tj frame to fix some rust issues. First welding project.

@CFairNH 4 жыл бұрын

Another great video. You are really keeping us wanting the next one! Thanks again for the fabrication tips, they are great!! Keep up the good work!

@50thgen2gtmustang4 4 жыл бұрын

Thank you making this video we need more people like you.

@Icecream_Unicorns 4 жыл бұрын

Man i just love your tutorials, straight to the point and the cut to the screnes with the voice over keeps the interaction going. Thats just my opinion thou. But mainly enjoy learning new methods and tips as well. Keep up the awesome work man. All the way from Aussie land.

@TheBeardedJeeper 4 жыл бұрын

Love it! I can’t wait to start fabricating more. I would love to see more like this

@jerabonanno4180 4 жыл бұрын

Love the work man working on getting material to make my first bumber on my obs f250 🤙🏼🤙🏼 thanks for the knowledge on square tube that’s what I’m working with

@amdviperxd98b 4 жыл бұрын

Simple and strong design, good work. As always, your videos are awesome. Keep it up.

@exoticreptileranch 4 жыл бұрын

Lesson #1 clean my floor so I can draw on it!. Lol. 👍😁

@davecochran7324 4 жыл бұрын

This is just what I need to get moving on my projects. Your explain in basic easy steps with good reason and best practices Thanks

@ob6565 4 жыл бұрын

Massive thanks for this video!!! I've been trying to figure out a better way to fab up my fenders for my trailer build... And this showed exactly what I need to do!!! So awesome. Cheers!!!

@DirtLifestyle 4 жыл бұрын

Great! Sounds like perfect timing 👍. Good luck with the fenders buddy

@raymiller2538 4 жыл бұрын

Great job Nate! I love the content of your videos. Keep it up!👍🤓

@JollyRogerHobbies 4 жыл бұрын

Your videos and Matt's videos are why I learned how to weld. Very fun to learn. Thanks for making great videos, and I like to learn and watch more of these types of fabrication videos.

@E-N-A-R-D-L-A-V 4 жыл бұрын

Saw Low Buck back there with the windshield re-installed. Can't wait to see that video! Gonna be honest, Low Buck is my favorite build on Bleepin' Jeep. No one there ever messes with the classics, so I was super excited when you came along and brought that ole grandpa back to life! Glad to see you contnue on with that build on your own channel. Dig your channel by the way, takes guts to go out on your own and try to build something from scratch, good luck, and know that I am rootin' for ya!

@3.0colorado21 4 жыл бұрын

Thanks for these man. You’re making good content, keep on keepin on

@moabwheeling 4 жыл бұрын

Thank you for posting this Nate and I'm learning from you . Looking forward to your next one .

@Ben-sz5po 4 жыл бұрын

Very nice! Thanks for teaching something for us beginners to start working towards.

@garywilliams7484 4 жыл бұрын

Good looking basic project. Reminds me that I need to make a new ramp for my trailer.

@joachimburg1122 4 жыл бұрын

Starting my own business fabricating odds and ends. Have taken a lot from your channel. Thank You!

@DirtLifestyle 4 жыл бұрын

I'm glad to hear it! Good luck with your new venture!

@tractorboy31 4 жыл бұрын

My first project was rebuilding my trk flatbed then i did my flatbed trl dovetail wood to angle iron then new ramp pins and tubes. Im looking to purchase a plasma cutter this year

@nwilson97 4 жыл бұрын

Great video Nate! I'm new to welding and fabrication. Something I struggle with is determining material thickness to suit a project. Could you do a future video on what goes into that decision process? Most of my projects involve Jeeps, and I'd eventually like to be able to build myself custom suspension.

@friesianfire 4 жыл бұрын

Love the tutorials Nate! Great job as always.

@bdubya63 2 жыл бұрын

This was excellent. I'm new to welding and metal work. It's very cool to see the layout and plan of a project. Thanks for posting.

@Tightsqueeze1998 4 жыл бұрын

Tacking in to the beat. . .love it, great job! Love your work!

@kevingilson7917 4 жыл бұрын

Your timing is perfect Nate , Thanks my list of projects is becoming longer now I have more inspiration very cool😃

@angusmcguckian7314 4 жыл бұрын

Love the way you explain things simply. Your Fab videoes are fab!

@louisduhon5811 3 жыл бұрын

Great video! Really enjoy your mix of entertainment and knowledge. Inspiring me to get out in the garage and build stuff for my wife's Libby.

@backyardbashing6136 4 жыл бұрын

thank you for this video. popped up while i was trying to decide how to build my first bumper for my jeep. turned out great now i want to build more stuff!

@DirtLifestyle 4 жыл бұрын

Congratulations! Welcome to the club! Fabrication is somthing that will change your life it you put the time in. I'm happy to help 👍

@johnhenderson4837 Жыл бұрын

GREAT VIDEO ESPECIALLY the layout and pie cut explanations More please Searching your videos soon as this one ends!!

@J_J2552 7 ай бұрын

This is EXACTLY what I've been looking for. THANK YOU!

@michaeldurling793 4 жыл бұрын

Nate, You pegged me to the wall again. I really appreciate you starting this series, FAB for NEWBIES, I soak this stuff up and never get tired of it. To show my sincere appreciation you now have another Patreon supporter.

@DirtLifestyle 4 жыл бұрын

Thank you very much! I'm happy to help and I appreciate your support 👊

@fredalmond9130 4 жыл бұрын

I'm going to have a lot of spare time coming up and want to get into fabrication with my everlast welder big time. This video is a great help.

@peters4067 4 жыл бұрын

Been welding and fabricating about 5 years now, still learning everyday. You’re the first person I’ve ever seen mark your centre line the same way as me 😂

@daxinventor3542 3 жыл бұрын

Good job, and thanks for showing how to simply putting it together without taking to much time. Less is more.

@coltonmanietta6201 4 жыл бұрын

Got a car hauler that is the same setup... looks like I’m gonna start another project haha

@j.wilson641 4 жыл бұрын

Very cool! Perfect video for me where I’m at.

@adansoto7931 4 жыл бұрын

Good video can’t wait for more like this! Thanks

@oliverkauper6015 4 жыл бұрын

This is the perfect video for me because I'm just starting to use my everlast welder to make some projects.

@DirtLifestyle 4 жыл бұрын

Great! I'm happy to help 👍

@JohnTCampbell1986 4 жыл бұрын

Definitely wanna see more stuff like this (and grind/paint/finishing when you're not tired after filming). Finished college last year and only got a small amount of experience so the more knowledge and ideas I can get the better imho.

@katoasian 4 жыл бұрын

Awesome!! vid!! thank you! love these videos. The production this is on point. Sometimes we forget that this one man team. Thanks nate

@DirtLifestyle 4 жыл бұрын

Thank you very much!

@Captaindan7141 2 жыл бұрын

That welding rod gap fill technique is awesome, thank you! I always tried cutting a tiny piece of metal and try to hold it in place to weld haha. This is way better.

@joselozano0528 4 жыл бұрын

Now that's a fender. I do landscaping & these stock fender are always messing up.

@jamesmac7040 4 жыл бұрын

This was an awesome video. Well put together and great narration. Great level of detail and skipping things that can be found on channels elsewhere. Awesome.

@michaeldurling793 3 жыл бұрын

Yeah Buddy, ok Nate this is just what I needed, I am that guy. I got a multi process welder and now I am trying to learn how to use it. Looks easy but not so much, I'm sticking metal together but it aint pretty seems like I spend more time grinding than welding. Focusing on flux core wire cuz I don't want to waste money on gas till my skills improve some. Trying to fabricate some type of rack for the jeep so I can haul my wife's kayak fairly light yet removable.

@pthrelkeld090 3 жыл бұрын

I learned a lot from this video, straight forward, easy to follow and understand. Subscribed!

@darrenmills1235 4 жыл бұрын

Just bought my first MIG.... great video... I'll be watching more , easy to follow.... Thank you

@rgrote3 4 жыл бұрын

Your a good teacher Nate, thank you!👍

@cjjohnson3939 4 жыл бұрын

Man, you are putting out all the right motivational vids! This makes me wanna get my shit together and fix my welder and get to it 👍 Well done Nate, keep them coming and have fun @ KOH!

@tomzeedee 4 жыл бұрын

Thank you for making this vid...you explain the small details that other fabrication videos leave out..subscribed

@DirtLifestyle 4 жыл бұрын

Thanks buddy 👍

@georgeeads8689 4 жыл бұрын

Great video Nate. Basics are the key to success.

@jonsimpson5952 4 жыл бұрын

I am working on my first fabrication project for my 95 YJ. Sorry for this kinda cheesy comment, but....this is exactly what I was looking for...this is the best KZfaq video I have ever watched!!! No joke. 👍👍👍👍👍

@DirtLifestyle 4 жыл бұрын

Thank you! I'm glad to see my videos are helpful 👍

@brandonwallet885 4 жыл бұрын

I didn't really learn anything new, but i did get motivated to actually get out and start/finish my trailer.

@smackerindignity 4 жыл бұрын

Good job, on both the build and the editing. I liked how the weld hits went with the beat of the music @ 11:11+

@carlzrx 4 жыл бұрын

This was a really informative vid,thank you.

@chintanvyas12395 4 жыл бұрын

What u said at the end really proves how much experienced ur because in fabrication not everything goes perfectly perfect at all.

@paulezk 4 жыл бұрын

Great info, thanks Nate!

@markbraden6743 4 жыл бұрын

Great video. I’m a beginner and your advice and tips were great and easy to follow. 👍

@KaiganH 4 жыл бұрын

Your editing is great. Solid how to video. Subscribed, keep up the great work.

@VidVillain 4 жыл бұрын

You are very easy to learn from your videos are so educational. Thank you

@keithfriesen3420 4 жыл бұрын

Great beginner stuff Nate, thanks for the sweet content.

@stacyreid5077 4 жыл бұрын

I need to build some fenders myself on a trailer. Thank you for the great tips

@mountainlessmtb9940 4 жыл бұрын

Where were these videos when I was learning 😂great job ! I already have a jeep problem now I have a binge watching your videos problem🤘

@Kevin.L_ 4 жыл бұрын

I like the fabrication videos. Definitely pick up some stuff I can use. Thanks.

@davidgregorovic3973 3 жыл бұрын

I'm hooked, I've welded a little thru the year's but im in the process of picking a welder so i can start building stuff.. Great video, i can't wait till i can finish my garage!!!!