Рет қаралды 13,826
Parts Links (not sponsored):
6 lug rotors - www.summitracing.com/parts/cl...
CPP Spindle Disc Brake Kit - www.summitracing.com/parts/cl...
CPP 2" Drop Spindles - www.summitracing.com/parts/cl...
Moog Upper Ball Joint - www.summitracing.com/parts/mo...
Moog Lower Ball Joint - www.summitracing.com/parts/mo...
In this video we go over the entire braking system for the new 1965 Chevy C10 Shop truck. We started out with a CPP Master cylinder and brake booster to replace the oem single cylinder setup. Then we replaced all the ball joints with some new Moog units. Jason was able to score an $8.00 pitman arm from the clearance bin at Summit and it happened to be a direct replacement. We were then able to get the CPP 2" drop spindles installed to mount our drilled and slotted rotors. Daniel cut, flared, and bent the new brake lines and installed the parking brake and it stops on a dime now! There were bolt-in spring spacers in the rear that we removed to get the truck to sit level and even lower. We're in love with the way it looks now and next up is some interior work and a new 5spd transmission! Thanks for watching and stay tuned for the next episode!
LINKS TO OUR NEW TOOLS AND EQUIPMENT: linktr.ee/BuildBreakRepeatCha... (Amazon Affiliate Links, if you buy something using our links it will help the channel!)
CHECK OUT OUR INSTAGRAM! build.break.rep...
-----------MERCH------------
MERCHANDISE CUSTOM DESIGNED BY YOURS TRULY
teespring.com/stores/build-br...
--------------TOOLS------------
Eastwood Dimple Dies:
www.eastwood.com/eastwood-pun...
Texas Metalworks 40x80 Welding Table
texasmetalworks.com/product/f...
RogueFab Tubing Notcher
www.roguefab.com/product/vers...
Pro-tools Tubing Bender
pro-tools.com/collections/tub...
Optrel Crystal 2.0 Welding Mask
usa.optrel.com/en/eye_protect...
Optrel Grinding Mask
usa.optrel.com/en/products/au...
---------MUSIC --------
Music - Background and Montage Music Is From Epidemic Sounds
www.epidemicsound.com/
Intro Song - Jimmi by Andrew Applepie
• Andrew Applepie - Jimmi
Timestamps:
0:00 - Intro
0:23 - Parts
1:42 - Master Cylinder
3:00 - Disc Brake Install
11:17 - Admiring the Results