Discovering The First MAJOR ISSUE On The Supercharged 1UZ Drift Truck...

Рет қаралды 50,643

6 ай бұрын

Today we take Drift Truck V2 to a local drift event and discover its first issue! Unfortunately, its a relatively major one: something in the harness is causing the ECU to short out...
SUPPORT ME HERE! ► / gingium
OTHER VIDS!!
Quick Builds► • Quick Builds
Drift Truck ► • Drift Truck
Rally Miata ► • Project Rally Miata
Eclipse ► • 1G Eclipse
LS Volvo ► • Volvo Sleeper
BE MY FRIEND!!!!
Follow me on Twitter ► / _gingium_
Follow me on Instagram ► / gingium
MY RECORDING EQUIPMENT!!
Camera ► amzn.to/3lVq7J9
Lens ► amzn.to/3yhf168
Microphone ► amzn.to/3q4pv5x
Tripod ► amzn.to/3pOGiZR
Carry Bag ► amzn.to/3rV50uz
SD Card ► amzn.to/3lQdv68
MY FABRICATION/MECHANIC EQUIPMENT!!
Welders & Supplies ► www.usaweld.com/?Click=67190 (code: GINGIUM)
CNC Plasma Table ► store.langmuirsystems.com?aff=23 (code: GINGIUM)
Tube Bender ► www.roguefab.com/ (code: gingium25)

Пікірлер: 131

@_Gingium_ 6 ай бұрын

I know blowing this fuse SEEMS like a small issues. But uh, spoiler alert, it’s still happening ☠️

@mateorendon7000 6 ай бұрын

Why not just run a dedicated ignition power. This will bypass the harness and isolate the issue.

@dilloncrossland8422 6 ай бұрын

@@mateorendon7000I second this

@tylertyler3416 6 ай бұрын

do an amp test while its running could have too many things on one circut

@802Garage 6 ай бұрын

Well def no surprise the new ECU uses more power than the factory ECU, but if you're blowing larger fuses too, maybe something is shorted. Womp womp.

@user-wm9pj2xj7z 6 ай бұрын

Don’t feel bad about it my shops electrical guy spent over 40 hours testing for issues and eventually found a aftermarket fuse tucked up behind the gas tank little electrical issues can be hard to find

@DingDongDrift 6 ай бұрын

Drift truck deserves a PDM and completely new chassis harness

@_Gingium_ 6 ай бұрын

I think you’re right…

@DingDongDrift 6 ай бұрын

@@_Gingium_ I'm your guy

@13geeky 6 ай бұрын

Oh fuck.

@ProModsPerformance 6 ай бұрын

By someone who knows what they’re doing as well.

@harryfp1494 6 ай бұрын

@@ProModsPerformancelike by your mom ?

@UncleTriangle 6 ай бұрын

On my 1UZ swapped IS300, I've had an issue with air fuel sensors with an internal short that was causing my ecu fuse to blow. On a Toyota Tundra 2UZ, I had a cam sensor wire that was intermittently shorting out to the block, due to a skinned wire. The wire had been damaged during a previous water pump replacement in which the sensor wires pinched between the pump and left bank timing cover backing plate. Although that problem was caught, the skinned wire was overlooked. I found the fault on both vehicles by randomly unplugging connectors until it stopped blowing fuses. From there, both were easy fixes, by just replacing those previously mentioned parts.

@_Gingium_ 6 ай бұрын

That’s very interesting. I’ll have to look into both solutions!

@paulvollmer4215 6 ай бұрын

Can't wait to see this thing fully ripping. And even more excited to see the wide body build and paint job. Love seeing you improve every video! You're my favorite creator on KZfaq right now.

@_Gingium_ 6 ай бұрын

Thank you so much! I really appreciate the support

@Sr-ps5eo 6 ай бұрын

So happy the drift truck build is getting better viewership, it’s been a while since I’ve been this invested in a fab-heavy build.

@yuGtahT 5 ай бұрын

Track guy: "I like that" All of us who've been watching this build for the last 5 years: "yeah, we do too"

@abro0371 6 ай бұрын

Everything about the truck is sick. It’ll look sweet with a fresh paint job if that’s the plan. Also that dude sending you off into the track was cool asf.

@VanLifeKen 6 ай бұрын

That thing is sexy mid-slide. All the hard work youve put into this thing is finally paying off. Even the track workers cant take their eyes off her! Mad props and respect, Caleb. Long time i been watching u and it never gets old like alot of other 'tubers. Youre a cool dude and u deserve all the fruits of your labor ⚡✌🏾

@kiraleaf 6 ай бұрын

I can't wait for the paint and final assembly of this beast. I know for sure that a 10-minute 'building of' Drift Truck v2.0 is gonna be lit!🔥(Please don't actually set this one on fire! lol .. all of the safety improvements should help it survive)

@GTSW1FT 6 ай бұрын

Why hasn't he looked at installing a fire-suppression system? It would save the car if it did get a little 🔥

@abdulrahmansiraj1018 6 ай бұрын

I saw this s14 where they wrapped clear pool noodle around the roll cage of the interior and placed the lights inside it. You should try that on the drift truck's interior. It'll definitely match the outside underglow.

@GTSW1FT 6 ай бұрын

Gotta have some padding around the cage

@JustKyzuuh 6 ай бұрын

You're getting better for sure, I would 100% recommend removing the handbrake or just not ever using it. You seem to be relying on it way too much and it will likely harm your progression

@LovelieMaki 6 ай бұрын

bro makes a smokescreen that makes him look like a Pro FD driver HAHAHAHA, I love it!

@danielhughes9556 6 ай бұрын

Im not huge into the drift scene. Infact, im not a fan at all. But i love the fact that youve paid your dues, and actually are using the vehicle as intended. Personally i love the fabrication end of your channel, but regardless, its still cool to watch. You do you though! Thanks for another video

@nathans5773 6 ай бұрын

Gotta roll that sound deadening. Those little bubbles are spots where it isn’t fully contacting the metal and therefore it isn’t dampening the vibration as much as it could. At least, that’s the theory.

@macneg 4 ай бұрын

You’ve gotten so much better at drifting since the first vid drifting the truck it’s noticeable. Great work!

@acks1yeah 6 ай бұрын

5:41 maaan this is sick!

@06dpa 6 ай бұрын

That shot at 9:35 is making the build look so small! Despite that, it still has the bigger bed and drifts better.

@glebpetropavlovskiy8175 6 ай бұрын

Is that ricer that dropped his miata on teinz doing SCANDINAVIAN FLICKS NOW? Holy fuck Caleb, came a long way 🔥🔥🔥

@longtongs9556 6 ай бұрын

Man, love all the content, your builds are inspiring to see on the track, keep up the good work!

@mazdaholic323 6 ай бұрын

Its crazy looking at the smoke your truck produces compared to the others on track. Love this truck!

@NobiZero 6 ай бұрын

That happy laugh during your second run is the kind of stuff that I come back for. Even though it didn’t end the way you wanted, it makes me smile to see all of your hard work pay off.

@SidewaySensation 2 ай бұрын

Can I just say. your drifting skills has improved so so mach. Would love to see you on a FD track. Good job man. Loving it!!!

@1993Revhead 6 ай бұрын

How has this guy caleb not got 1,000,000 subs yet?

@GTSW1FT 6 ай бұрын

The damn algorithm

@Cobra_427 6 ай бұрын

I don't know if it'd look good on a truck like this, but I think this truck has potential to pull off a wood bed floor, it'd be different for sure, no one's putting a wood bed floor on their Mazda, though steel would obviously be stronger for actually using the bed

@_Gingium_ 6 ай бұрын

It could be cool but I don’t think it’ll work for our situation

@06dpa 6 ай бұрын

@@_Gingium_ Could always use some wood decals!

@thepoolsheriff_TX 6 ай бұрын

Yes sir that was smooth damn ..clean bro

@c0wb0yTV 6 ай бұрын

looks like youre having fun that's awesome!

@alep_sn9550 6 ай бұрын

On my angle kit setup I just torque the jam nuts to the appropriate torque for a 3/4 jam nut (like 110ft-lb iirc) and then tack welded them.

@BruddaCherokee 6 ай бұрын

Can’t wait to take some pictures of the truck at Lanier 🤙🏼 good luck guys!

@802Garage 6 ай бұрын

Yeah I'd say it makes some freakin' smoke!!! Your driving skill is wild already dude.

@BoostedCajun 6 ай бұрын

This needs to go to the LZ Compound and get some fine tuning done to it. I’d love to see you collaborate with Adam LZ on this.

@jurgenbebja8615 5 ай бұрын

yep. been saying that for a while now but idk.. wish this would become a thing

@kermittf9896 6 ай бұрын

Go Caleb! - you throw into the apex with the aggression of a Summernats ( Oz) burnout . ❤🤘 superb in car footage. 👍

@mal3762 6 ай бұрын

with the wiring issues, might be smart to add either a fire supression system or some fine ass fire extinguisher close to reach

@mastercricket7626 6 ай бұрын

Rad bro and cant wait to see DTV2 and Molly upgrades and ripping together maybe😮😅 .. much love and respect brotha keep up the sick work , peace and love bro keep it rad stay safe and build on l8z fam

@tuckerjones957 6 ай бұрын

Obsessed with this build. Should look into a day at Midpond in Alabama now that you’re down here in the south!

@spedracer55 6 ай бұрын

Omg im soo in love with how the truck looks

@mochabear88 6 ай бұрын

Cool stuff

@rookiefloridasportsman7787 6 ай бұрын

Nice seeing the former ginger having fun on a track

@richardlapoint1845 6 ай бұрын

Dude that tire smoke was nasty 👌

@deanwells86 6 ай бұрын

Caleb, you should look into learning how to safety wire your bolts for the steering system. That way, even if they loose their initial torque value, they won’t be able to work themselves loose.

@Ricer_roni 6 ай бұрын

Hopefully I get to see this thing rip in person again soon!

@mikecrystalrobert7898 6 ай бұрын

Man that truck is sick makes lots of wheel speed which equals maximum 💨💨💨💨💨

@mj10188 6 ай бұрын

that boy whippin it tho!

@lathamdewolfe5390 6 ай бұрын

Hit those body kit bolts with a black sharpie and it will improve the look of it a lot I think

@Texburrito03 6 ай бұрын

Sorry to hear it, but glad it's an easy fix

@ThatOneHoosier 5 ай бұрын

would be badass to see you drifting with the truck with another big drifter like Adam LZ

@markstorer7204 6 ай бұрын

If that angle kit has to be re torqued every 5 or so laps I'd be safety wiring those suckers (as per most motorsport applications) so they can't move or come undone ..... its a potential safety issue Caleb....

@carsonmeyer2808 6 ай бұрын

Maybe red lock tight them

@BassManBobBassCovers 6 ай бұрын

My first thought was ECU, but not fuse. At least you know now!

@yungkidnf 6 ай бұрын

Reminds me of a Taylor Ray video

@keithparker7412 6 ай бұрын

Sucks about the fuse, but this thing is rippin! It seems like you’re really having to row that e-brake to get it to work, idk how far they normally go so maybe that’s on purpose lol

@lazlomiskolczi5217 6 ай бұрын

As you have a 240 front suspension basically you can with a wisefab as well

@NotFamous_A90 6 ай бұрын

LMK next time you plan on coming out to C&O. I'll gladly make a small drive (im 30mins away) and snap some photos for you!

@BennisMaximus 6 ай бұрын

That is one mean clouds machine!

@IxsnipeddxI 6 ай бұрын

yeah your headlight beam was way to high. From the last event when you street tuned... them people flashing you their highbeams i was like yup way to bright lol huge fan on lights

@ciskeee6714 6 ай бұрын

you probably not gonna read this but for your widebody you can try to bring the ligths out with the fenders, just like those boxed japanse boso cars. Maybe

@Raio_Verusia 6 ай бұрын

Hit that Friday event a few times, milk it... Not to profit, but to profit in skill. You'll learn the truck, we get to see your progress, and you can run it, break it, fix it, repeat way easier that way.

@larrykay6606 6 ай бұрын

Makes molds of the side skirts before they get destroyed!

@elishmittywerminghanjensen1264 6 ай бұрын

Bring the drift truck back to Shawano WI 🤘

@MrKwiatekp 6 ай бұрын

Maybe invest into Wisefab angle kit?

@ibby5923 5 ай бұрын

ginge what type of livery style do you prefer ; old school dtm/racecar or hot boi flames ?

@BenHut69 6 ай бұрын

Dude this truck is so fuckin coooooollllll. I got an LS in my car already but I need a 1UZ. This thing sounds nasty

@jetink600 6 ай бұрын

Fender flares and spacers for the rear

@rhettsalsbury9394 6 ай бұрын

Question, ever gonna do a build with a VK56?

@STR8SICCC 5 ай бұрын

*So what did you do to quiet up the exhaust?*

@Iamdesignproducts 6 ай бұрын

This thing RIPPPPPPPS 😮

@georgedreisch2662 6 ай бұрын

Thinkin’ a faster steering rack and pinion would help, especially in the transitions.

@justjoshing4164 6 ай бұрын

Hey gingium soooo what does the truck weigh?

@parkerbanken1831 6 ай бұрын

I think I need a new diff since it whines crazy but I wanna hit a drift event or something with you soon I mean obviously I’m not gonna be with you drifting but yknow we can hit up Lanier with Johnny and Kurt

@rookiefloridasportsman7787 6 ай бұрын

I have a good habit of checking every fuse even if they are completely unrelated because I have a bad habit of buying other people’s project cars.

@Justin-up4li 6 ай бұрын

Is the factory ECU fuse big enough for the modem ECU? Might be the problem

@SullySadface 6 ай бұрын

"Lemme out, lemme out!"

@jasonmoneypain8470 6 ай бұрын

Why is the pull on the hand brake so long?

@ih8twin 6 ай бұрын

🔥🔥🔥🔥🔥

@ballparkappollo5141 6 ай бұрын

keep working on that flick and you’re gonna be styling and another driving technique to play with us left foot braking to extend your line rather than the handbrake good shit though

@icestormgaming9357 6 ай бұрын

damn things a smoke grenade lmao!

@MemelordJord 6 ай бұрын

Gingium

@roachwerks3043 5 ай бұрын

how much horsepower does this make? guestimates?

@cingkole7893 6 ай бұрын

this truck deserves to be in SEMA next year

@yvngbvby3267 6 ай бұрын

Cant wait till you are 100% comfortable with all the new changes because this thing is mean and gonna be nasty to drive!

@quinton7854 6 ай бұрын

people liking it since its not too often you see a 1uz mini out there sliding like its a car

@thenotoriouslex7028 6 ай бұрын

that truck needs to go to SEMA

@leftcoastdrifter 6 ай бұрын

Drift Truck!!!

@bulgarianicedtea7897 6 ай бұрын

Where’s the turbo FIT videos? Coming soon I hope

@stilllmkp 6 ай бұрын

should have put a 1nz fe motor in it

@StanleyKubick1 6 ай бұрын

3 or 4 drift videos in a row ain't it

@Mitzkal 6 ай бұрын

"You can definitely hear the supercharger more"... NOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO!!! Please don't!!! The engine sounds so good, don't ruin it with a ******* meower!!!

@rhorn79 6 ай бұрын

Its the Honda key chain

@Boss-vk3do 6 ай бұрын

Fix the damn e brake holy shit thats so bad, you shouldn’t have to pull it to the floor

@CalVlogz 6 ай бұрын

Would you ever consider putting a wider rear axel on this ol’ girl? If I remember correctly you narrowed an 8.8 for it but would it be worth the wider track width and wide body thicc ness?