🇵🇰 :)

Fantastic. But did not like the guy welding with no protection. Closing your eyes is not good enough long term. Btw this used to be an industry here in Norway, building buses on imported frame + engine.

Panel beater here it’s all considered a repair

Exactly

Son de otro mundo manejando esa mierda y pasando mensage por e celular .

boy it's a good thing you showed up

Yes it's called discarding and carding mechanical. With stickerings and motor chain belt 5.0 acordances.

It actually is a repair, just no restoration.

The old body was pretty stuffed to be fair, i,m glad i was Not in it, my guess; it went over a bank??

Panel beater here it’s all considered a repair

Do they make the PAZelle there?

Yes they know work work and work with cares of designers :)

Do not forget overloaded the are terrible for overloading vehicles I would not want to travell in it why did it crash steering failure or brake failure not for me I do not trust it

Exactly what i was thinking, rebuilt and ready to roll (over)... again...

@@Frankestein01nl Quite, and yes indeed, repeatedly rebuilt until the inevitable crash involving a huge explosion (and much loss of life) makes this impossible. Although even then...

yeah... perfection... for 19th century

​@nikkkk1633 if you don't think this is impressive given how it was done, you're just being an ass.

ЛиАЗ курит в сторонке , ха ха ха

Судя по качеству автобусов от ГолАЗа, при их сборке применяются примерно такие же технологии, так что то, что эти люди делают "на коленке", думаю не хуже того, что делает наш завод в Голицыно))))) Ну и ЛиАЗ не далеко ушел)))) У этих парней некоторые решения даже лучше, чем у наших заводов))))

Thanks 🙏

А волшебный, всё варящий гнутый электрод?

Так это их предупредили что снимать будут и они одели чистую одежду.

Скоро и мы так будем всё строить. Ещё б нам в Сибирь тепло почаще подвозили. И депасы за внесение изменений в конструкцию не разматывали.

​@@pnireset В Сибирь ты точно уедешь и не автобусы строить.

That means their labor is cheaper than robots and electricity

@@nicknamenick9448 Probably, or at least on this location the cost of bringing in, maintaining and securing robots is prohibitive. I've also read comments from CEO of companies from poorer countries who say they are committed to hiring more people and are opposed to replacing them with robots because the jobs they generate is a big help to their families and community.

Yes

Good job!

But your insurance premiums would put you out of business, welding without eye, hand or body protection, not boots, not even shoes for some. nah.. they work hard not because they want too.

That welder had better be very well paid for his work and risk taking...

You mean that you would exploit them and live off their hard work while paying a pittance?

That makes 2 of us. These guys don't stop.

@@Elwingish bahahah yep a whole $1.27 per day

Note: the oldest of these workers is 23.

this is not painting, this is rust or base coating

Difficult is welding to the given meaaurement

yes but that one guy if a screw doesn't come out in like two turns its time for the grinnder lol

Their country is a Nuclear Power. People tend to forget that.

@@Mercmad 🤷‍♂ and what has this to do with this comment? lol ..

Agreed, over 20 years ago when I lived in the Middle East my sons had a quad bike for the dunes, they stripped the rear sprocket, I went to an Indian bike repair shop, he’s shook his head and said it will have to come from Japan (Honda bike) it will be 2 to 3 months, seeing the disappointment on my sons face the guy said, but I can make one, it’ll be ready tomorrow, 22 years later my son 31 years old still has the quad on his woodland home and that sprocket is still on it! These people are so resourceful they deserve massive respect.

​@@Mercmadnot only a nuclear power but a responsible nuclear power. Huge respect for the Indian community here in Scotland 🏴󠁧󠁢󠁳󠁣󠁴󠁿

Yes, and we would have had a safe bus instead of one bent to shape and held together with tack welds.

@@PreservationEnthusiast absolutely there are no regulation's here at all. Im just please my family dont have to get on transport "repaired" like this.

Also here are people that are polarisering. Menings don't count, facts do! ❤

Yes definite as Korea beely bottoms

_No risk, no fun - no guts, no glory..._ "as they say" ;-)

@@MrKotBonifacy

Obviously they have never heard of "Arc-Eye" (Welder's Flash)? - An inflammation of the cornea, caused by ultraviolet radiation from the arc during welding. Nasty and even possible loss of sight if long term exposure like these guys! I had it once as a young apprentice - that was enough for me! Use your heavy goggles or proper welders helmet guys! 😮

@@peterhowells7309 But that's the problem with them... Deeply ingrained work habits (BAD habits), and lack of any interest or desire to improve things around even a little. Arc eye? Put a slice of potato (or cucumber) on the eye and the next morning you'll be alright (Insh Allah...). EDIT - I think it was "potato juice" drops applied to the affected eye - not sure, Uncle Google is yer friend. Safety? What, you don't trust Allah Almighty? All and everything is in his hands, so if I'm going to be killed, in the grand scheme of things, by this or that, there's nothing that could change that. When strong turbulence hits an airplane, and the stewardess shout "FASTEN YOUR SEAT BELTS!" what one should do? BUT OF COURSE shout "Allahu Akbar", and fork the belts. It's all in the hands of The Almighty, so what use of then flimsy effing pieces of Allah knows what. See, when Moguls (who were Muslims) invaded (and conquered) what is now North India, the lowest castes converted to Islam in droves - say the right formula three times in a Mosque, and presto! You used to be an untouchable, something between leper and a dog - and now you're a proper human, equal to all them nawabs and sultans! (In theory, that is.) So, what's not to like about it? (and use it). But then that magic procedure doesn't (nor can) make anyone smart, educated and all - so when Pakistan was established they didn't have enough educated clerks just to staff properly post offices. I guess things have improved there since then, but seem only so much...

@@peterhowells7309 was sat there thinking those shades they were wearing probably weren't quite enough.

Non stop makings

No pesky police harassing them.

Panel beater here it’s all considered a repair because it was damaged that includes new parts

Adres beliefing of originals is the Pakistan government licensed vehicles sticker niazi daewo skyroofs and new khans

Thanks 🙏

Discovering nothing, its been on YT for years 🤣

_"никакой Техники безопасности"_ ? - есть внимание...

I would take these workers over any western world worker, they work hard, they are completely aware of what is going on around them. And talk and work at the same time, how many times have you seen a group of workers in these talking and working at the same time, never because they feel they need to stop what they are doing while they stand and chat. This was how it was back in the 60’s and 70’s in a lot of mechanic shops, the guys would be chatting away while working. Not today, workers cannot seem to talk and work at the same time. These guys may not be dressed by western standards, but then unlike those in the west they are completely aware of their jobs and work as a team. Can say that about many western companies these days.

ага, пазики отдыхают. вместо одного пазика можно 3 таких сделать))) шо одно сарай на колесах, шо другое))) надо тока толпу бенгальцев-пакистанцев выписать и они за скромную еду наштампуют на 100 лет вперед)

так это и есть грузовик, по крайней мере шасси от него на рессорной подвеске

Can you tell me why it looks like a circus wagon? I this going to be used for royalty? Why all the fanciness for a utilitarian bus?

А наш Паз-Вектор чем отличается? На строительных саморезах и на пене держится.

What ?

когда чел заезжал в мастерскую на одной чисто раме с мотором и рулем, я подумал, а нафига что-то вообще делать? эти люди и так спокойно могут чисто на раме свесив ножки на сотни км мигрировать. а потом увидел "дворец" на крыше и понял, что им тупо будет некуда их любимые мешки с дерьмом грузить

Thanks 🙏

Looks like it was rolled

00​@@philipstanbridge6535

Just like in every other country. Even law enforcement can be seen watching their phones. 😼😸

😂😂😂😂🤣🥳

у них спецы с мерседеса стажировку проходят.

Сарай передвижной !!

세금 착복 하려고 판매부수 맞추려 잔뜩 찍어 내자마자 폐지로 수출 해버리는 찌라시 클라스.....

좌파들은 공정한 뉴스를 보도하는 신문사를 찌라시신문이라고하지. 그럼 경향이나 한겨레가 우수한 신문이냐?

Не стоит: возрастет стоимость работ. Еще, чего доброго, с новой сварочной маской начнут подводные лодки ремонтировать!

судя по тому, что сварочная маска фигурирует лишь в половине случаев сварок, они эволюционировали уже. скоро и тот огрызок маски выкинут за ненадобностью. будут на слух варить

Thanks 🙏

would have been stronger if they had used super glue and duct tape

Thanks

А где ещё 5$ то заработать? У них за прошлый год прирост населения 5 миллионов ртов. С таким темпом они скоро будут за 1-2$ в день вкалывать. Заберут у Китая все производства.

Warning; watch out for falling parts!! Lol

Thanks 🙏

Yes boxing feul tanks. Become easy then

What the plastic windows have bars that keep you from going straight through them. 😂

Because it's a poor country bro that is the real reason 😢

Its probably permitted because the frame and running gear aren't damaged, the glazing and loose sheet metal has been removed or secured, it isn't carrying passengers, and they aren't travelling in dense traffic. Its already a truck chassis with useless bent metal on top. Strapping it to another truck chassis and calling the mess "transport on a flatbed wrecker" checks all the vehicle operating condition boxes but doesn't actually do anything to change the safety profile.

In Pakistan no need of permission