Dismantling a $200 junkyard Barra engine - Project NOMANG Ep15

Dismantling a $200 junkyard Barra engine - Project NOMANG Ep15 | fullBOOST

Рет қаралды 43,027

2 жыл бұрын

It’s been close to two years since we launched project NOMANG, a Ford Barra powered Holden Commodore street car. Well as you might be aware a lot has changed in the world since then and living in Melbourne Australia has certainly been challenging in terms of moving forward with our build timeline. We did intend on showing more track based episodes, but rather than have the car sit in the corner patiently waiting to race, we’ve decided it’s overhaul time so in the coming episodes we will cover a new engine, transmission, turbocharger and fuel system upgrades.
If you’d like to be notified every time we upload a video, subscribe and then click the bell icon 🔔 next to the subscription button. Get your track gear! 👉 shop.fullboost.com.au
Pro Flow Fab & Dyno | www.proflowfab.com
www.fullBOOST.com.au
Follow us on social media @
KZfaq
/ fullboostcomau
Instagram
/ fullboostcomau
Facebook
/ fullboostcomau
COPYRIGHT WARNING:
The above video is copyrighted © to Fullboost
You do not have permission to download it and re-upload it anywhere in any form. You can click the share button on KZfaq for that, or copy/paste the URL to social media.
#fullBOOST #FordBarra #projectcar #holdencommodore #nomang #proflowfab

Пікірлер: 158

@fullboost 2 жыл бұрын

It’s been close to two years since we launched project NOMANG, a Ford Barra powered Holden Commodore street car...so we’ve decided it’s overhaul time! If you’d like to be notified every time we upload a video, subscribe and then click the bell icon 🔔 next to the subscription button. *Get your track gear! 👉 **shop.fullboost.com.au*

@daledenton9246 2 жыл бұрын

Use fuckers better help me out in the comment section. 😂

@tturi2 2 жыл бұрын

should see what a dry sump is worth for power, don't wanna starve your $15,000 engine of oil

@jmoore9806 2 жыл бұрын

What's no mang mean ?

@onedayiwillmakesomecontent 2 жыл бұрын

@@jmoore9806 the commodore v6 is referred to as a mang-mang. That is the sound it makes when horsepower heroes go limiter bashing! 🙂

@jmoore9806 2 жыл бұрын

@@onedayiwillmakesomecontent you saying l67 make a mang noise on the limiter?

@benni727 2 жыл бұрын

$1800 left to make the 1000 hp barra

@paulburgermonster238 2 жыл бұрын

3.8L bottom end to pay proper homage to the origin of the VS.

@christophermclean5620 2 жыл бұрын

“Never late in a free point ate”

@jasonmcmillan4373 2 жыл бұрын

I'd love to see someone build a 3.3 Barra short stroke engine. There used to be two Falcon sixes back in the old OHV days, a 3.3 & a 4.1. A 3.3 version in these would rev like hell, and would have less chance of turning its tires to instant smoke every damn time off the line.

@panagiotis1519 2 жыл бұрын

Bloody oath maaaaate!

@lrrr9734 2 жыл бұрын

"So you don't even know if it turns over" "No, I don't care" This guy is my spirit animal

@PiazzaWoodWorks 2 жыл бұрын

This guy is a good fit for your channel! Very knowledgeable guy and seems humble

@anthonycavalliotis8736 8 ай бұрын

Good Mechanic's are hard to find.

@andrewntoth1 2 жыл бұрын

There's plenty of extreme builds out there , I want to see a quality street build with emphasis on torque through the rev range 👍

@daviousmaximus6446 2 жыл бұрын

You guys doing stages of build gives us punters much better info for limited dollar builds of our own. I like the idea of a stock crank to start with.

@bluespig1 2 жыл бұрын

Love the obsession with these motors, especially the way they dispatch of LS powered cars after light work.

@MrZillaman73 Жыл бұрын

FULLBOOST the best BOOK MECHANICS ON THE PLANET

@WILDSTYLEVOLATILE 2 жыл бұрын

Build it once, build it right, do the crank boys

@alexsivkarovski7899 2 жыл бұрын

surely a crackle tune giving the fact your going stage 1 :)

@Wotm16 2 жыл бұрын

Yeah it works like that bro

@WeLoveCommodores 2 жыл бұрын

Great to see another NO MANG Ep !!! The engines probably already built so just patiently waiting for the next ep on the dyno !!!

@pheonixfps9248 2 жыл бұрын

I would say with evidence that the crank is flexing as it is with the standard caps, check the crank for straightness, do the caps, do a 360 thrust bearing upgrade too, if the crank is FUBAR, do the crank, and future proof it, and this would help with harmonics a little bit too. Cnc the head, stage 1 equivalent, double springs, atomic chain setup and guide bolt, billet pump gears. You want to set this up to have long lasting trust in it, IMHO. Good luck guys.

@jasonswift7098 2 жыл бұрын

What are you on about? the crank was not flexing or warped.

@pheonixfps9248 2 жыл бұрын

@@jasonswift7098 you clearly don't know much about what was happening.

@jasonswift7098 2 жыл бұрын

@@pheonixfps9248 yes i do, put up the time stamp where you reckon you see the crank all wobbly and twisted.

@young11984 2 жыл бұрын

Cant wait for the ZF build

@RivalGamingRvlG 2 жыл бұрын

Factory crank is pretty good as is, rod and piston is more of an affordable upgrade for most so to see it done and what its capable of without spending a million dollars would be awesome, would reach out to alot more people too

@manitoublack 2 жыл бұрын

Always head porting :D (oil pump) Glad to see this project back on.

@ACCELGarage 2 жыл бұрын

While a forged crank is good insurance, you will always be tempted to push it that little bit more, and a little bit more, and then where does it end? Personally, I would stick with a stock crank and limit the power output via the turbocharger.

@shakstar 2 жыл бұрын

You wouldn't know anyone with a hub dyno !!!!! 🤪🤪🤪🤪🤪🤪

@ACCELGarage 2 жыл бұрын

@@shakstar 😂

@jesus_built_my_hotrod 2 жыл бұрын

Awesome. Love nomang, cant wait to watch this build.

@AlienLivesMatter 2 жыл бұрын

Throw that crank back in backwards to counter the taper wear on bearings haha lol Seriously ditch the stock crank and forget about having to pull it apart again unless you explode it at the track or pushing on the dyno. A crank driven centrifugal turbocharger in the style of an EMS freight train would be very unicorn 🦄

@jacksun_jack 2 жыл бұрын

NOMANG is seriously so cool, I love these videos

@adamsutherland751 2 жыл бұрын

Thanks for another episode on this build boys ive been watching since the beginning and am waiting for the next episode. As for engine specs you boys could work that out but i do think that block needs a powder coat👍👍👍

@yowie0889 2 жыл бұрын

If you remove the rust it's not a proper Ford.

@axejuric6279 2 жыл бұрын

My 2c... Stock (checked) crank, quality rods and pistons, girdle, quality oil pump. Done right will handle 1000+. Mild cams to keep it nice on the street and stick with a mid frame turbo. With big boost should be great at the track but still responsive enough with the ZF on the street. Pretty much my plan for my BF, I'm a fair bit heavier though! Looking fwd to seeing the results 👍

@Doc_in_the_carpet_truck 2 жыл бұрын

Al Gore gots the rhythms love this build George is a mad man so wanna see the nomang transbrake launching at Calder once we are open again🍻👍

@adamskinner5987 2 жыл бұрын

Standard crank and girdle , better pistons and rods , billet oil pump , fg xr6 turbo cams , good size injectors , 6boost exhaust manifold and maybe a plazma man plenum

@ChristopherHallett 2 жыл бұрын

Go a different way to everybody else - instead of throwing 35-40 psi of boost at it, run high static compression and less boost pressure with the smallest turbo you can get away with for like 900 flywheel horsepower, but a super thick and fat torque curve right through the rev range.

@edbeme2474 2 жыл бұрын

.'ve watched this series from the beginning ...I hadn't realised its almost 2 years since the first episode

@justinfargas2367 2 жыл бұрын

Yeah me too bro, the ole 'rona messing with timelimes, and everything else generally.

@xbgtfella 2 жыл бұрын

Also george it would great to do a comprehensive vid on a stout built zf auto on the channel plenty out here running that kit and not wanting to mortgage the house with bills north of 10k for a result.

@barratec3047 2 жыл бұрын

Stay with a factory crank and main cap set up , do piston and rods, use a bigger pin, use arp 2000 main cap studs , and bolts for rods . Arp 625 or equivalent head studs , keep it standard size . Do a fire ring head gasket set up , and grout fill block to Welsh plug . Do all the common mods etc oil pump, chain and the rest . 208 intake and exhaust cams. Throw in a mid sized turbo example PTE 7685 gen2 and your good for 1200rwhp max at around high 30s psi region. In a car like the commodore which would be about 350kg less heavier then the Ford's the Barra came in, I guess you would be looking at low 8s.

@zacha1408 2 жыл бұрын

Full girdle, rods, pistons, stock crank

@jeromespiteri1801 2 жыл бұрын

Quickest barra street powered commodore sounds good 🤔

@krispykruzer 2 жыл бұрын

7:47 factory crank in sync from both fellas And Nomang at the end

@scottfarrell3044 2 жыл бұрын

I suggest maybe in the name of keeping within the realms of "stage 1" and the budget checkout Atomic's crank hardening/treatment process. It would seem that the factory crank can support surprising numbers. (Rpm & tune relative) .

@conkapetanakis1002 2 жыл бұрын

Put a Boss in it 💪

@smithy2 2 жыл бұрын

Yeh buddy 🤙

@onedayiwillmakesomecontent 2 жыл бұрын

Any more shots of those twins on the bench and I would have sworn I was watching bench torque! 😄 Build it mental and chuck on a multi stage adjustable tune dial via the fan switch, and it will be a full yoo toob queen! Lol

@STREETCARCULTURE 2 жыл бұрын

Here we go!

@mikenolan3060 2 жыл бұрын

Bloody freedom day in NSW wooooo hoooooo gladys is gone!! Dan your next fella! You n gladys can give each other ripstarts in prison. Barra video wasn't too bad too.

@MrFathead 2 жыл бұрын

The stock crank can take a beating I would be surprised if you have problems with it before something else. Save the money and use the stock one. I wouldn't bother porting the heads myself but I would love to see a video of it being done haha.

@shakstar 2 жыл бұрын

Only 10mins .. what a tease. 😃😃😃😃😃😃

@EYESWIDEOPEN00 2 жыл бұрын

As per what you were discussing, stage 1 would be plenty. In that car that would be more than capable of running into the 8's and you would still retain longevity

@michellee8369 2 жыл бұрын

I would love to see a modern set of twins compression hard and early on a full built bottom end with standard cams and head fire ringed only due to the engine configuration where it generally produces and where in the range it does I think a twins combo has potential that’s it

@quincyoconnor9707 2 жыл бұрын

Twins are always inferior. Only reason it is done nowadays is for packaging on v6s and 8s. If you wanted epic response it would be cool to have a g25-660 and boost from idle but might only rev to 5k?

@ChristopherHallett 2 жыл бұрын

@@quincyoconnor9707 It'd rev to the limiter, but it'd be choked to shit at higher revs and the power curve would be very sad. Even with a G35-900 you'd be wanting one of the largest size exhaust housings so as to not strangle it.

@thewraith6360 2 жыл бұрын

6:09 is he whistling The midnight- vampires? Hell yeah LOL Def go piston and rod setup!

@proflowfab 2 жыл бұрын

Sure was 👍

@fullboost 2 жыл бұрын

Watch till the very end 👍

@kolelambert41 2 жыл бұрын

100%, rods, pistons and a girdle.

@73bigted 2 жыл бұрын

Rods, pistons and cams please you can do a full send later should be plenty for a ZF

@BJK1987AU 2 жыл бұрын

-rods -pistons -oil pump -head studs -stage 1 cams (street car) -new quality timing kit -good head gasket Leave the rest OEM.

@davo7512 2 жыл бұрын

Valve springs?

@STREETCARCULTURE 2 жыл бұрын

Hey George, I'll grab those old pistons from you!

@MafiaboysWorld 2 жыл бұрын

While we're on topic, you obviously saw that I don't need those parts off you now! 😂👍

@mark7457 2 жыл бұрын

I reckon buy the crank now. I did hear you say send it..

@peterfoster1035 2 жыл бұрын

Sonic cheek the block . That would be the limiter for starters

@davydoo81 2 жыл бұрын

3.8 Nitto de-stroker, GT47 and let it eeeeeeeat!

@TheSkyline333 2 жыл бұрын

4.2L stroker. Full send for NOMANG

@jasonmcmillan4373 2 жыл бұрын

@Nick-dw3sv 2 жыл бұрын

The best option for this engine is to send it to me in the states and I'll slide it into my fox body 😃

@mex1848 2 жыл бұрын

Keen to see where you spend the $1800 on the engine

@hollowsesh90 2 жыл бұрын

Twin topmount turbo's because its cool and just isn't done anymore. Maybe two oem xr6 turbos top mounted? Or similar equivalent

@knight2425 2 жыл бұрын

In my opinion if you pulled the engine that far down you might as well do the crank, at least the engines is done if you push more boost later

@malsmith2012 2 жыл бұрын

Loving the series fella's. What's Franks opinion on the crankshaft?

@JamesMcMahonAU 2 жыл бұрын

Full send.

@xbgtfella 2 жыл бұрын

Dont know if its been suggested but would a front crank torrington bearing conversion be overkill on this build. What would be the cost to do this conversion. Looking at doing similar build at xmas time.

@mg74xbgt 2 жыл бұрын

Doing the torrington bearing on the crank to stop float ?????

@7071t6 2 жыл бұрын

It come down to what you want to achieve in drags, if you want to go down the 1/4 with a VR with a barra then make sure its going to do at least 9's or hi 8's so around 1,000 to 1,500 at the rear wheels that way the engine and other mods are made to do the job, if not then have it doing 10's is like every other barra out there even a Holden with a barra?

@bradhansen4312 2 жыл бұрын

Instead of upgrading later, start correctly, I totally agree!

@ChristopherHallett 2 жыл бұрын

The fuck? 1500 at the wheels would put a VR into the low 8s easily, traction permitting.

@anthonystefano1441 2 жыл бұрын

Hey fullboost curious how something like this goes on the street? I’ve never been in a swapped barra lighter car. I’ve got a fg xr6t Ute with 350rw & tbh feels pretty boring. I’ve had 200kw silvias that were a lot more fun. I’m guessing this being fairly light would make it more lively? Cheers for the content 👍

@yowie0889 2 жыл бұрын

Needs to be a spoon engine with three t66 turbo's with NOS and a Motec System Exhaust.

@ChristopherHallett 2 жыл бұрын

But what about the danger to manifold?!?

@yowie0889 2 жыл бұрын

@@ChristopherHallett You can set up a laptop warning for that. The sensor is attached to the passenger floor pan.

@mikelumba 2 жыл бұрын

Rods piston and dial in the 12

@GMKOOP Жыл бұрын

"EX-taxi" be alot better than that "other" taxi 😜

@TorqHub 2 жыл бұрын

These build plans needed more buzz words like "Fully built", "blueprinted and balanced", "ported and polished", "lumpy cams", "billet", "big single". Somewhat disappointed.

@fullboost 2 жыл бұрын

We already have a set of ghost cams for it 🤔👍

@TorqHub 2 жыл бұрын

@@fullboost Oof. They're kinda the same as 3/4 race cams, right?

@ChristopherHallett 2 жыл бұрын

@@TorqHub "3/4 race cams"? Is that like a stage 6 street/track grind?

@G42J3T 2 жыл бұрын

Unless you guys are shooting for 1200+hp the standard crank will be fine, your "stage 1" engine should be 1000hp capable and I'm guussing more than enough for the zf and the goals for the car. Keen as to see the next video. Good luck lads Also... You need to build it for under 8k to shut the haters up

@fullboost 2 жыл бұрын

@@Cheato That doesn't mean every std crank would make that. 👍

@Cheato 2 жыл бұрын

@@fullboost true

@wobblysauce 2 жыл бұрын

More so with unknown kms/hrs on it.

@BoogalooShrymp 2 жыл бұрын

Bruh, there was no need to barra swap it. The mang would be good for a megawatt with just a pod filter and big bore exhaust. Mang the world!

@rob45x 2 жыл бұрын

Rods, pistons, cams and ported head and your done.

@rodneynicholls6537 2 жыл бұрын

valve springs and oil pump gears?

@stephangiannoulidis509 2 жыл бұрын

Rod and pistons all day

@mortis13 2 жыл бұрын

Does the ZF break before the crank?

@motorhead3153 2 жыл бұрын

Not a fan of barra or ls motors, however I do enjoy watching them strip and rebuild the motor

@kurtmacgregor3127 2 жыл бұрын

Boys your gonna push my 1000hp for 2k build out of budget, temping me with new cranks, naughty naughty

@quincyoconnor9707 2 жыл бұрын

Lpg and turbo motors have stellite valve seats for the extra heat. Na heads have shit themselves very quickly without them.

@kaseyeveringham2867 2 жыл бұрын

Nitto 3.8L Destroke! ;)

@BigPermGarage 2 жыл бұрын

I'm that U.S. fan....😂

@bvward 2 жыл бұрын

Hmm... Thought I was.

@Matthew-jd2lr 2 жыл бұрын

Look into the spool kits not bad

@MafiaboysWorld 2 жыл бұрын

Spool is awesome, got them in my 1JZ. 👍

@MrBrandonfulton 2 жыл бұрын

Would you know where I can find some rocker/followers? Bought a barra imported into America and some water got into the head and ruined 10 of my followers. I have found lifters, springs, and valves. But cant seem to find new or used followers.

@Magpies_corey 2 жыл бұрын

3.8 litre de-stroke 🙏🏼

@jdogncars4819 2 жыл бұрын

Full boost build

@W0rp3D 2 жыл бұрын

Your decision depends on how far you want to send it, don't they reliably handle over 1000 rwhp on the standard crank?

@stephen865 2 жыл бұрын

kzfaq.info/get/bejne/aM57o7WF1624ZWg.html stock crank

@SuperRandykid 2 жыл бұрын

Depends on the castings, definitely would wanna get the crank tested if your going to throw money at decent rod/piston combos There's been stock Nanna driven barras with broken cranks, and there's been guys with 1500hp who have had no issues

@g1annzz 2 жыл бұрын

I’d suggest just go all out and spend the WHOLE $2K!

@samoneill8685 2 жыл бұрын

What music were you talking about? I couldn’t catch what George said

@fullboost 2 жыл бұрын

The Midnight - Vampires

@samoneill8685 2 жыл бұрын

@@fullboost that the one he said he was obsessed with that he was whistling? Thanks bud

@xxBIGxCHIEFxx 2 жыл бұрын

Put a crank in it.

@anthonypllu3864 2 жыл бұрын

pft dont need all that forged stuff, just ghost cam, cracke pop tune and some 20w-50 and she be right to go

@ChristopherHallett 2 жыл бұрын

20W-50? In what, the radiator? Chuck some 85-140 diff oil in the motor, it won't burn any then and the oil pressure will be fucking incredible!

@paulcoote3094 2 жыл бұрын

Guess we need to know the budget??

@smithy2 2 жыл бұрын

Fast is just a case of money, how fast do you want to go?

@vongdong10 2 жыл бұрын

America has the 5.3, Australia has the 4.0

@MafiaboysWorld 2 жыл бұрын

Another episode of showing off the mighty RB40. Also, check out and share my Barra memes from my IG, cause as we all know... *NOTHING BEATS A 2K BARRA!* 😁👍

@ChristopherHallett 2 жыл бұрын

What the hell is an RB40? This is a 3JZ-GTE.

@MafiaboysWorld 2 жыл бұрын

@@ChristopherHallett Go look at the Motive comparison of a Barra block, an RB block and a JZ block and look which ones are identical in bore spacing.

@ChristopherHallett 2 жыл бұрын

@@MafiaboysWorld Bro, everybody knows the Nissan RB26 is just an exact rip-off of the BMW M88!

@bluebird8004 2 жыл бұрын

Well of course we're gonna say "full build that shit"....but it's not our money is it. But please......build the crap out of that thing if possible 🤞 Another great vid guys👍

@ilsando3550 2 жыл бұрын

Get some Tonebox or Lucy in Disguise background music next

@Manuqtix.Manuqtix 2 жыл бұрын

My suggestion -Forged Rods and pistons -Fast street cams -gas flow head with 1mm oversized valves -arp head gasket and studs -independent throttles -banana branch -200 shot nitrous NO TURBOS KEEP ATMOSPHERIC.

@benni727 2 жыл бұрын

green top send it