Dissolved Styrofoam or Plastic Coating of Products

Рет қаралды 360,976

2 жыл бұрын

Dissolved Styrofoam or Plastic Coating of Products | Disolve Styrofoam for plastic coating of your proyects
Hello.
Previously, almost every homemade product I had to cover with several coats of varnish. This is especially necessary for products that are installed outdoors. But varnishes do not always perform their protective functions. For example, sometimes there are varnishes that do not dry completely and can still stick for a very long time. Sometimes it happens that the individual parts of the product are glued together, and then come off from each other with paint. It also happens that the product is glued to the surface on which it stands.
To avoid the problems described above, I cover my products with dissolved styrofoam. Thanks to the thin layer of plastic that remains after applying the solution, my products get excellent protection from rain, wind and other vagaries of nature.
In this video you will see how to dissolve the styrofoam for use as a protective layer for products.
Dissolved styrofoam is very firmly adhered to the surface of the product and is the best substitute for varnish.
Thank you all for watching and for your comments.
Many thanks to everyone who subscribed to our Patreon:
bit.ly/37f37MB
Your support is very important to our channel.
_________________
DIY Amazing Tea House using Lipka:
• DIY Tea House using Ca...
White Lipka - Super Clay for Modeling:
• White Lipka - Super Cl...
Gray Lipka - Super Modeling Clay:
• Gray Lipka - Super Cla...
Paper Clay Recipe:
• Paper Clay Recipe | Ho...
The Best Paper Clay Recipe:
• The Best Paper Clay Re...
Thank you for watching!
~~~~~~~~~~~~~~
→ Subscribe to new videos from the "Cheerful Craft" channel here:
kzfaq.info...
→ Our Social Media:
TWITTER - / serhii80215080
FACEBOOK - / cheerfulcraft
BLOGSPOT - cheerfulcraft.blogspot.com
VK - CheerfulCrafts
"Cheerful Craft" is an interesting, entertaining and educational video from talented authors.
We are interested in your opinion about our videos, so please leave comments, ask questions, and put your likes and recommend our videos on social networks!

Пікірлер: 636

@CheerfulCraft 2 жыл бұрын

Thank you for your wonderful comments, likes, and reposts! Become a channel sponsor and get access to full versions of master classes: KZfaq: kzfaq.info/love/fE-tUg247LKQX3aWjlhqLAjoin Patreon: www.patreon.com/CheerfulCraft

@mehmetalicilingir1026 5 ай бұрын

Benzin olurmu

@debracarter7290 2 жыл бұрын

This is brilliant and not only that, watching that styrofoam dissolve is very satisfying!

@lotuselanplus2s 2 жыл бұрын

Lol, did this 45 years ago, the concrete on the garage floor used to powder and my Dad and i mixed up a whole lot of Styrofoam and lacquer thinners, ended up with about 2 gallons of the mix, still on the floor today and still holding up.

@TheStigma Жыл бұрын

That's pretty cool. So it ages and keeps well, at least indoors away from UV? Decent spill resistance I imagine? I'm kind of playing with the idea of coating the garage walls (and tablers, shelves ect.) with a layer of this over very cheap paint - with the idea being that I could just hose the whole area down if needed. Thinner can be gotten in bulk pretty cheap, and styroffoam is basically sourced for free if you know where to look. Good water-repelling outdoor paint or polyurethane on the other hand is pretty expensive where I live, literally on the order of 10x the price of cheap indoor wall paint. I will definitely do some smaller scale tests on this and see how well it resists some common "garage spills". The thing I really love about DIY solutions like this is you can just make a dollar's worth more if you need small repairs or expansions, and understanding what the product is really made of is important.

@lotuselanplus2s Жыл бұрын

@@TheStigma if you spill gas or thiner on it it will soften again, easy to repair and will reharden when the solvent evaporates.

@TheStigma Жыл бұрын

@@lotuselanplus2s Thanks. I don't suppose you know how it compares to polyurethane?

@XofHope Жыл бұрын

@@TheStigma I'd love to know that too.

@kostasbeverly9713 Жыл бұрын

Καλημέρα Επειδή δεν ξέρω αγγλικά καλά τι διαλυτικό είναι αυτό και που μπορώ να το προμηθευτώ είναι διαλυτικό νίτρου διαλυτικό πολυουρεθάνης White Spirit κι αν είναι καλό το υλικό για πάτωμα....

@rutedesouza6956 2 жыл бұрын

Gratidão 😍ganhou mais uma inscrita, amei suas dicas e trabalhos 😍

@sometimessnarky1642 2 жыл бұрын

I now know how I'm going to recycle/upcycle my styrofoam! Thank you!

@travissmith7471 2 жыл бұрын

Great idea... Thanks for the health warnings... Thanks for sharing...

@pinecrone8991 2 жыл бұрын

This just what i needed. Thank you.

@vandanascimento6262 2 жыл бұрын

Amei a dica!!!! 🤗🤗🤗🤗

@isaurasabinademoura9090 2 жыл бұрын

Amei esta dica!!! Brasil MG!!!

@gohawks3571 Жыл бұрын

Ongosh, this is amazing! Idk how I missed this, but thank you! I have been wanting to make crafts for outside (like a basket for dog toys), but I didn't know how to deal with the weather....

@lucerorodriguez5021 2 жыл бұрын

Gracias 😊, me encanta tu trabajo y lo que haces por los demás no había encontrado algo así, con las masas que me han encantado y ahora éste para protegerlas más, Dios te bendiga🙏🙏😀😘

@CheerfulCraft 2 жыл бұрын

Hola. Muchas gracias por las amables palabras. Espero que este video te sea de utilidad.

@wendyzilli9735 2 жыл бұрын

Fantastic!! What a great idea!! Thanks for sharing!! ❤️

@CheerfulCraft 2 жыл бұрын

Hello. Thank you for your comment and kind words. I'm glad you liked this idea of covering homemade products.

@Robbyrocklegend 2 жыл бұрын

What a great idea.Thank you.💝💝💝

@user-ik8xk3kc8y 2 жыл бұрын

Супер! Молодцы! Спасибо!

2 жыл бұрын

You are the best!!! Thank you! Ever

@samutracio 2 жыл бұрын

This is amazing. Thanks!!!

@alinsamal1107 2 жыл бұрын

Большое спасибо за идею 👍

@carlosteixeira9548 2 жыл бұрын

Muito bom. Desconhecia essa fórmula. Muitas compras online vem com isopor que sempre é descartado. Agora podemos reciclar com vantagens.

@CheerfulCraft 2 жыл бұрын

Olá. Obrigado por seu comentário.

@Igrejavirtual7 2 жыл бұрын

Magnifico...👏👏👏

@stephenm103 2 жыл бұрын

Be certain that any plastics u brush this on (as well as the paints applied) are NOT solvent based. Lest your project be “melted” or otherwise ruined

@ATinyPillow 2 жыл бұрын

Why would anyone put this on something made of plastic in the first place? Plastics are already waterproof which is the purpose of applying the styrofoam (plastic) coating. \ (0.o) / .

@stephenm103 2 жыл бұрын

@@ATinyPillow because people dont know any better ? Because they like the look? Because they might perceive it as adding a layer of protection to their paint job? Lotsa reasons people might choose to do so.. OTHER than waterproofing

@ATinyPillow 2 жыл бұрын

@@stephenm103 : Stephen, watch the video again. The whole point of applying the styrofoam/plastic coating was to waterproof the item, he even showed pieces that were coated withstanding being totally immersed in water. .

@stephenm103 2 жыл бұрын

@@ATinyPillow sure. In this case thats this artists purpose. But people apply clear sealers to their work for lotsa reasons OTHER than just waterproofing. Right? They want a consistent uniform sheen to the work - for example.. or - they want to protect an otherwise fragile finish. Waterproofing is one pf many. THE POINT IS - dont apply this coating to anything that is susceptible to solvents.

@AWanderingEye Жыл бұрын

@@stephenm103 Hi! I came here from another video where the maker created a thickened paste which was used as a glue. He then made a patch out of it and put it on a hole he made on a plastic jug. After letting it cure, he showed how it was a permanent fix to the plastic container. Personally I wouldn't drink that water, but as a fix on a jug for handwashing water, a laundry liquid detergent jug, etc. I think it was an excellent idea. Got me thinking of going around town and collecting styrofoam just t make up this glue/bonding stuff and keep the styrofoam out of the landfill...

@ClemenceMB 2 жыл бұрын

Incroyable !! J'ai regardé plusieurs de vos vidéos et je suis époustouflé par vos créations !!! Merci pour vos recettes et votre technique cela me servira énormément pour mes futurs projets de création ! Coucou de la France ^^

@CheerfulCraft 2 жыл бұрын

Bonjour. Merci pour le gentil commentaire. Je suis content que mon travail te plaise. Bonne chance dans vos projets.

@arturofigueroa1139 10 ай бұрын

Se puede utilizar como pegamento o es solo como aislante

@barbaragrace1992 2 жыл бұрын

Awesome. Thank you.

@neonboy22 2 жыл бұрын

Acetone is the solvent to use. When it evaporates it leaves no residue. I have used it and styrofoam for years. If you try to use the resulting gloop in a mould, then when it dries you will see huge amounts of small air bubbles still trapped inside - this is the milky look when it's a dense globby mess. In the video the mixture is quite runny. You can make it as solid as you like - just use less acetone. You need a vacuum pump if you want to degass it and use it as a solid moulding material. One last thing - I have found it breaks down in direct sunlight and becomes quite brittle, but as a thin coat, as used here, its probably ok.

@hillaryclinton2415 2 жыл бұрын

Water free only.. but toluene seems to work better for me

@pzzuo1387 2 жыл бұрын

I tried using lacquer thinner at first. It just melted the styrofoam into a ball of putty-like stuff and wouldn’t disperse into the thinner. I think you could use it in a mold, not sure. I’m going to try it today. It’s still white, so I suspect it’s got a lot of air in it still, but I think it will work.

@andreweliason713 2 жыл бұрын

If experimenting with acetone, please use outdoors ONLY. Not only is it bad for your health, the vapor is literally explosive in some concentrations.

@Very_horny_rapists_meiteis Жыл бұрын

Can I use the mixture for smoothening the lightly rough surfaces of car's side claddings?

@Bhaavya130 11 ай бұрын

Is this thinner epoxy thinner

@user-yw4rn3xf6i 2 жыл бұрын

Спасибо за идею.

@user-mg5or1tg1v 2 жыл бұрын

Excellent thank you! What else can be covered with this composition?

@betulkaya6307 2 жыл бұрын

Bu harika bilgi için teşekkürler.👌🙏

@walterherzer8356 2 жыл бұрын

Não sabia... muito ótimo a sua idéia...vou fazer tbm... obrigado... abraço

@CheerfulCraft 2 жыл бұрын

Olá. Obrigado pelo comentário positivo. Fico feliz que você tenha gostado da ideia de cobrir os produtos com espuma de poliestireno dissolvido.

@creativearthandmadejewelry4108 2 жыл бұрын

Thanks alot for this informative video

@recepdundar6889 2 жыл бұрын

Very good. Thank you very much.

@RavenVargas27 2 ай бұрын

Ah watching the styrofoam dissolve is so satisfying this is genius can't wait to try it thanks

@conceicaodomingues8048 2 жыл бұрын

Amei !!! Gratidão por compartilhar...

@lucioburza 2 жыл бұрын

Thank you for the idea. I believe that gasoline or acetone could be used as solvent too.

@CheerfulCraft 2 жыл бұрын

Hello. Yes, you can use different solvents.

@alaorjr9515 2 жыл бұрын

Boa dica, thanks!

@goretemarques8170 2 жыл бұрын

Excelente!!!

@joseditegoescampelo5411 2 жыл бұрын

Muito legal parabéns 👏👍🌹🌷🇧🇷

@SuperCarmen57 5 ай бұрын

Thank you very much it is very useful !

@domimassou5457 2 жыл бұрын

Very interesting thank you for sharing with us

@Buzzhumma Жыл бұрын

I think you can add a bit of brake fluid to act as a plastizer so it is less brittle

@demetduzgit5496 2 жыл бұрын

WOW very interesthing.. I looking long time.. For this Thank you soo much 🌹🐾

@user-er1fc6mk2g 2 жыл бұрын

Супер! Огромное спасибо!

@user-kn6rz7ii1s 2 жыл бұрын

Спасибо! Отличная идея, главное - просто.

@N.27.27 2 жыл бұрын

Марина Вы поняли, что за жидкость (сольвент) используется? Спасибо

@skullingtonfly 2 жыл бұрын

Great idea 💡

@mariad4183 Жыл бұрын

WOW! tyfs!

@franciscarodrigues4810 2 жыл бұрын

Obrigado pó passar seus conhecimentos deus abençoe vc sempre 🙏🙏🙏

@MrNoralejandra Жыл бұрын

SOS increíble!!!!!

@andreaferrari4228 2 жыл бұрын

Hola este disolvente se pude hacer con thinner e isopor solo estos dos productos ? Gracias

@user-lx6di1cm5u 2 жыл бұрын

Спасибо!

@rhondakendrick2563 2 жыл бұрын

good job thank u 4 info

@nunyabiznes33 2 жыл бұрын

Good way to make use of scrap styrofoam

@ckm6234 Жыл бұрын

Usaste tinner verdad? Voy a probar en mis artesanías ❤️🙏 Excelente gracias por el tip"

@richardcoleman1018 2 жыл бұрын

Who would’ve thought all those pieces of styrofoam would fit in that little jar.

@user-co7in2qr5j 2 жыл бұрын

Удивительно , классно 👍

@user-ed6nd7yh4s 2 жыл бұрын

شكرا للفيديو الرائع مع الترجمه😍😍😍

@CheerfulCraft 2 жыл бұрын

أهلا. شكرا على تعليقك. إنه صعب ، لكني أبذل قصارى جهدي.

@svetlanaperevishina4119 2 жыл бұрын

Моя мама разстворяла пенопласт в ацетоне 40 лет назад🤗

@user-xt4ry4ob3q 2 жыл бұрын

Мы в Армии каблуки,подошвы сапог так приклеивали.вторая половина семидесятых.

@svetlanaperevishina4119 2 жыл бұрын

@@user-xt4ry4ob3q я о том же, клеили обувь.

@user-fy8ed1xs5f 2 жыл бұрын

Я пробовала в сольвент растворить почему то остаётся комок на дне пенопласт у меня из совсем мелких шариков плотный может пенопласт разный бывает?

@pzzuo1387 2 жыл бұрын

@@user-fy8ed1xs5f it is the thinner. Are you using Lacquer thinner? Lacquer thinner makes a lump of soft plastic at the bottom of the jar.

@rosangeladenoronha625 2 жыл бұрын

Meu irmão artesão usou essa mistura para colar tudo ! Por isso mais dissolvido vira tipo verniz mais espesso vira cola o que quiser ! .

@dacirabrandao 2 жыл бұрын

Mas o líquido é solvente?

@CheerfulCraft 2 жыл бұрын

Olá. Eu não falo português, então não entendi muito bem sua pergunta. Você pode parafrasear sua pergunta?

@zecarlospiripiri 2 жыл бұрын

@@CheerfulCraft está a perguntar qual é o liquido onde mergulham o isopor, é diluente.... éter......ou o que é?

@zecarlospiripiri 2 жыл бұрын

@@dacirabrandao é acetona pura,não pode ter lanoina ou vaselina .....só acetona pura

@CheerfulCraft 2 жыл бұрын

Olá. Eu recomendo assistir a vídeos com legendas habilitadas. Existem legendas em português. A substância na qual eu dissolvo a espuma de poliestireno é o Solvente n. Além disso, este solvente pode ser encontrado sob os nomes "solvente-nafta", "Solventnafta n" ...

@radiaradia6302 2 жыл бұрын

شكرا لك على هذا العمل الذي استفدت منه 🌹🌹🌹🌹🌹🌹🌹🌹

@CheerfulCraft 2 жыл бұрын

أهلا. شكرا على تعليقك. أنا سعيد لأنك استمتعت بهذا الفيديو.

@alineenegopreto5998 2 жыл бұрын

SENSACIONAL muito obrigado, uso verniz marítimo em tudo (mas vou substituir pelo isopor que Vc ensinou), pq as pessoas se esquecem que mesmo os mais bonitos artesanatos, sujam com o tempo e a poeira... agora vou ajudar a natureza não precisando mais sujar com o descarte do isopor, pq todos desprezam esse material aqui na minha cidade... inscrita, Like e compartilhando. Obrigado.

@CheerfulCraft 2 жыл бұрын

Olá. Obrigado pelo ótimo comentário. Fico feliz que você tenha gostado do revestimento plástico de seus produtos. O principal é seguir as regras de segurança ao trabalhar com solvente - cuide da sua saúde. Proteja não apenas suas mãos e olhos, mas também seus pulmões. Trabalhe ao ar livre ou em uma sala bem ventilada. E melhor ainda comprar uma máscara que proteja seus pulmões.

@vesna9978 9 ай бұрын

Thanks 😊

@cassiabitarelo6546 2 жыл бұрын

Muito obrigada pela dica. Irei usá-la nas minhas peças de papel mache.

@Lifeisbeautiful77711 2 жыл бұрын

Perfect

@alanduncan9204 2 жыл бұрын

I worked in Africa 20 odd years ago at the mouth of the Congo river. The locals mixed styrofoam with petrol to fill any cracks or splits in their wooden boats. I have wondered if it would be a substitute for glass fibre epoxy ?

@2degucitas 2 жыл бұрын

I lived in Mali 9 years and the styrofoam/petrol combo was well known there as well.

@sauravbasu8805 Жыл бұрын

What were you doing there in Africa ? And where you are now ? Curious, as you must have had many varied experiences. Please elaborate a bit. - from Kolkata(formerly Calcutta), India

@alanduncan9204 Жыл бұрын

@@sauravbasu8805 I was working for Exxon at the mouth of the Congo River on a project to build a supply base for offshore rigs. After being in Singapore, Qatar, Kazakhstan and China I am now in Senegal on a LNG project offshore. So my experiences are more than varied ?

@sauravbasu8805 Жыл бұрын

@@alanduncan9204 That is really impressive. Coming in contact with so many different types of people and culture, you have got an enriched life. Yes, more than varied for sure.

@jameemaree4602 8 ай бұрын

Would this work well to encapsulate cardboard surface and edges to waterproof projects or be too heavy/thick?

@makerofthingsunique 2 жыл бұрын

Excellent , going to try this on my fairy houses

@CheerfulCraft 2 жыл бұрын

Hello. Try it. I cover my fairy houses with this solution and I like it. But do not forget to follow safety rules when working with solvent. Protect your lungs and hands and work where there is no open fire.

@diycardboardbuild9209 2 жыл бұрын

wonderful

@rubenb.molina6968 Жыл бұрын

Any idea on the fire resistance/lack-there-of this solvent/Styrofoam solution?

@denizcelik7841 2 жыл бұрын

Harika tam aradığım şeyler sizin kanalımızda teşekkür ederim

@user-ff2ug9lt7g 2 жыл бұрын

المادة السائلة هل هي بنزين السيارات ( نستخدم بنزين السيارات + الفلين لعمل لاصق قوي جداً)

@vovanxoxlov106 2 жыл бұрын

Волшебная баночка! Аппетит как у моей тёщи...

@CheerfulCraft 2 жыл бұрын

Не рекомендую это кушать ) Здоровье на этом и закончится. Лучше использовать по назначению - покрывать этой жидкостью поделки и т.д.

@sarahmariakuipers3967 2 жыл бұрын

Thankyou

@billydarmetko1950 Жыл бұрын

What is in the cellulose thinner and solvent mixture

@pintaparty2498 2 жыл бұрын

Interesting! When dissolving the styrofoam, does it create harmful fumes? Thank you!

@CheerfulCraft 2 жыл бұрын

Hello. The solvent has harmful fumes. That is why it is recommended to work with this substance outdoors or in a well-ventilated room.

@pintaparty2498 2 жыл бұрын

Noted! Thank u!

@mercedesrodriguez4904 2 жыл бұрын

Muy bueno. Yo recuerdo que lo hacía en cuba con gasolina y si queda igual que un barniz. Es muy efectivo y duradero, además de económico. Gracias por compartir. Ese líquido disolvente donde se consigue, por favor. 👍👍👍😘😘😘💝💝

@CheerfulCraft 2 жыл бұрын

Hola. Gracias por un buen comentario. Compro el solvente en la tienda del departamento donde se venden pinturas comunes.

@tere3146 2 жыл бұрын

Hola mercedes, Buen tip Solo gasolina? No dísel ? Graciassss

@mercedesrodriguez4904 2 жыл бұрын

@@tere3146 jjjjj si era solo gasolina, bueno no se de que país eres, pero mija Cuba es la mata de los inventos de toda una vida, pues la necesidad obliga a estar buscando siempre la forma de resolver las necesidades. Gracias por escribirme me encantan tus videos Que Dios te bendiga🙏🙏🙏🥰🥰🥰🥰🥰🥰

@lacocinadealis4120 2 жыл бұрын

Hola, te pregunto q clase de disolvente es? Muchas geacias

@CheerfulCraft 2 жыл бұрын

Hola. No sé cómo se llama en español. Este es un solvente de celulosa común que se puede comprar en la tienda en el departamento de pinturas, barnices, etc. Simplemente pregunte en la tienda por un solvente que pueda disolver la espuma de poliestireno.

@HorstramWieljentic Жыл бұрын

Complimenti per l'ottimo spiegazione. Sei dirmi se posso applicare questa vernice anche sulle statue in gesso per impermeabilizzarle?

@CheerfulCraft Жыл бұрын

Ciao. Grazie per il tuo commento. Consiglio di testare questa roba su qualcosa che non è troppo male da danneggiare. In questo modo puoi determinare con certezza se la schiuma disciolta fornirà una sufficiente protezione dall'acqua per le tue statue.

@lacocinadealis4120 2 жыл бұрын

Súper 👍

@Cookiejug1 Жыл бұрын

Where do you get Cellulose Thinner Solvent in the USA?

@user-wl8cq6il5h 2 жыл бұрын

Все гениальное так просто .давно искала чем заменить лак.Супер мастер класс.А со временем он не пожелтеет?

@CheerfulCraft 2 жыл бұрын

Здравствуйте. Это покрытие не должно пожелтеть.

@habtamusium8646 3 ай бұрын

how to store it with out dry in container ? is there any preservative help keep long time

@petergarayt9634 Жыл бұрын

When I lived in Ghana in the late 90's they were coating their furniture with styrofoam dissolved in gasoline.

@helgamal Жыл бұрын

Скажите пожалуйста, таким пластиком можно заливать силиконовые молды?

@nilynily2954 4 күн бұрын

Can i use also sentetik tiner? And can you seal it over acrilic water baded colors?

@evastosic516 2 жыл бұрын

You are a genius there is millions of other applications for this to be used

@CheerfulCraft 2 жыл бұрын

Hello. To be honest, I did not understand your comment.

@evastosic516 2 жыл бұрын

@@CheerfulCraft outside such as coating a wood fence

@JustUsInBaja 2 жыл бұрын

@@CheerfulCraft She believes the dissolved Styrofoam could be used for many other applications.

@ademirso3432 2 жыл бұрын

Muito bom

@mucksforbucks6343 2 жыл бұрын

Hi How long will this product Last say to store it? Than ks I've been trying to find that information out.

@isabellemoraillon3291 2 жыл бұрын

Bonjour, merci merci pour le tuto de cette belle maison, j'ai presque terminé ! par contre étant débutante, je me pose la question sur le solvant, y a t'il une différence avec "diluant" ? car je ne voudrais pas faire de bêtise regrettable !

@Janescheekychickens 2 жыл бұрын

Hi, is the brush re usable after using this styrofoam sealant? Or does it go hard?

@CheerfulCraft 2 жыл бұрын

Hello. I usually leave the brush to just dry. Then, when there is a need to lubricate another product with plastic, I immerse the brush in dissolved styrofoam for a few minutes. There it softens and again becomes suitable for application of the solution.

@Janescheekychickens 2 жыл бұрын

@@CheerfulCraft awesome. Thankyou for the reply. I think I'll be giving it a try. And thankyou for sharing this info👌❤️

@ilameddin 2 жыл бұрын

Hocam bu solüsyonu yürüyüş yollarının adım taşlarını vernik benzeri veya taş cilası benzeri kaplaması yerine kullanabilirmiyiz? Teşekkürler.

@CheerfulCraft 2 жыл бұрын

Merhaba. Bence bu çözümü dediğin gibi kullanabilirsin. Ancak adımları kapatmak için çözünmüş köpük kullanmadım, bu yüzden %100 emin olamam. Denemeye karar verirseniz, lütfen sonucu yazın. Ayrıca güvenlik kurallarına uymayı da unutmayın. Akciğerlerinizi ve vücudun diğer kısımlarını koruyun ve açık alevin olmadığı yerlerde çalışın.

@maraleepaulus6605 Ай бұрын

Is this a clear coat to seal things?

@rethamoore4282 2 жыл бұрын

So I have a question. If you used it to paint over glass ball ornaments would it make them harder to break ? Please do a video on that. Thank you for sharing.

@CheerfulCraft 2 жыл бұрын

Hello. It would be interesting to know, but I don't think this coating increases the strength of items. So I think that glass balls will break with the coating as well as without the coating.

@rethamoore4282 2 жыл бұрын

@@CheerfulCraft thank you . I just wondered if you had tried it out . I'm sure you are right tho. That glass they use for ornaments is sooo thin, I wish we could make it unbreakable. Lol. Thank you for answering my question. I look forward to your teaching me more neat things. 😀👍❤

@CheerfulCraft 2 жыл бұрын

Thanks for your comments. Good luck.

@Coyote.T.B. 9 ай бұрын

Se podría aplicar en una pared de una ducha?

@magnoliaperezsanchez576 Жыл бұрын

OMG thanks

@carmelitadasgarcasdeolivei7985 2 жыл бұрын

Que interessante 🎂🤔

@laurenpiantino8312 2 жыл бұрын

Many thanks to Joe Farrelly, and many Thanks to Cheerful Craft for showing us how to do it. What a splendid video! :)

@CheerfulCraft 2 жыл бұрын

Hello. Thank you very much for the nice comment. I will be glad if the information from this video will be useful to you! Good luck.

@laurenpiantino8312 2 жыл бұрын

@@CheerfulCraft It most certainly will be useful to me, and many other subbers I don't doubt; we have all benefited from your many tips and tricks with arts and craft, and you give it with an abundance of charm and personality, it's a pleasure to watch your videos. I can't thank you enough for all the tips I've picked up from you. :)

@karimamontasir17 2 жыл бұрын

ربي يوفقك واتمنى لك كل خير شكرا👍👍👍👍👍👍👍

@CheerfulCraft 2 жыл бұрын

أهلا. شكرا جزيلا على التعليق الجميل لك!

@jerusalemhefiziba6588 2 жыл бұрын

Fantástico!! Amei!! Maravilhoso!! Deus abençoe vc e sua família!! Grata por compartilhar!! 😱😱😱😱😍😍😍😍😍😍😍😍😍😍😍😍😍😍👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👂👂👂

@CheerfulCraft 2 жыл бұрын

Olá. Muito obrigado pelo bom comentário. Boa sorte.

@RaymondLohengrin 2 жыл бұрын

Very good video and useful . I used this method when I built my first model RC airplanes, It seals balsa wood really well (I was ten years old!) I was a bit confused by the title of this video. May be it should say “Disolve Styrofoam for plastic coating of your proyects "

@melstar8579 2 жыл бұрын

I had to re-read the title a couple of times, which is what I clicked on it. I think it's missing the 'f' is supposed to say For , not Or.

@alessandroandrenacci2372 Жыл бұрын

Raymond, for balsa glueing, now i find abroad ( even in non-modellistic shops ) the following glue : "UHU - Hart" that has the same smell and appearance of that glue used when i was a boy ( now i am ... a bit older 😆 ); it was selled in anonymous little bottles only in modellistic shops, with clear appearance as water ( but much more dense ), i always heard it was made with celluloid dissolved in acethone ... UHU - Hart is just the same, you can buy also from internet in 125 ml or 33 ml tube ... At that time i used to diluite the "anonymous" version with acethone to give a better resistance and a finish to the silk-paper around the wings ... I'm much interested in this glue made from styrofoam in acethone, i just only fear about burning styrofoam, i heard of very tossic fumes from an odd combustion ... My best greatings from Italy ...

@antoniogirao 2 жыл бұрын

Interessante o seu video. Qual a quantidade de mistura de diluente e de isopor ? Obrigado

@CheerfulCraft 2 жыл бұрын

Olá. Não há um número exato de ingredientes, portanto, faça com que a densidade da solução seja adequada para você.

@antoniogirao 2 жыл бұрын

@@CheerfulCraft Obrigado pela resposta

@sahikadalklc1659 2 жыл бұрын

Müthiş bir bilgi,straforlarin dönüşümü beni çok etkiledi.Teşekkürler.

@daltro3396 6 ай бұрын

Qualquer solvente? Ou só funciona com slvente específico? Algumas casas de material de construção vendem solventes em garrafas pets.

@tere3146 2 жыл бұрын

Good! Very good tutorial , Thank you for sharing, Please I need ( we all ) 😉 Need to know what kind ( brand ) Of solvent you used in this video I used thinner and didn’t work I got a white gum in the bottom, And the rest was very, very liquid Thank you so much

@CheerfulCraft 2 жыл бұрын

Hello. I use a solvent called "SOLVENT n" or "Organic solvent". Also, many people use regular gasoline for this purpose.

@richardcoleman1018 2 жыл бұрын

I believe lacquer thinner will work.

@CheerfulCraft 2 жыл бұрын

If you are talking about a solvent for nail polish, it is definitely not suitable. Other solvents should be tested.

@jacobgeorge4742 Жыл бұрын

Good idea. But can I use xylene as solvent.

@eliasvictor8667 Жыл бұрын

Hello, I really like this idea, but I’ve been unable to get the styrofoam to the consistency shown to be able to apply with a brush. Instead what I get is more of a play-doh like clump. I’ve tried with both pure acetone and Klean Strip Lacquer Thinner. Any ideas as to what I’m doing wrong? Thank you.

@CheerfulCraft Жыл бұрын

Hello. You're doing everything right. The main problem is the solvent. I recommend you to go to a store that sells solvents and ask the sellers which solvent is best for dissolving Styrofoam. Then buy the smallest amount of solvent and try dissolving the Styrofoam in it.