Congrats. You just taught your viewers to make napalm type B

You can put your fingers into pure acetone because that’s what nail technicians use to remove acrylic nails and gel polish. I use it all the time. All it really does is dry your fingers out a little

It should solidify as the acetone evaporates, making it hard. Its really good for model making if its the right consistency

The forbidden laffy taffy

This guy is so polite, you can see him how he's moving bug while disolving styrofoam in acetone.

I did this and it works! It turns into a slime-like consistency and it is sooo soft and fun to play with. U can keep it in a container and it stays good! Just remember not to play with it for too long because it is still acetone!

This is the first video I’ve seen of him..I already love him 😂 also does he remind you of crazy Russian hacker?😂😂

Here’s another slime recipe guys • Nail Polish Remover • Paper Plate

Thank you very much for sharing that's wild I haven't seen this before cool

Everyone saying this is napalm, no, napalm is gasoline with styrofoam. The acetone is very volatile and would burn away a lot quicker than gasoline, for an incendiary device a longer burn time is favourable, and I'm sure gasoline is less expensive and easier to store.

Fun fact: In the Alien movies, they used this trick to show the Xenomorph acid effect. Very clever!

Don't use vinyl gloves with acetone, its the same as no gloves at all. It feels cold because the acetone has soaked through the gloves and into your skin. Expect to feel sick for a day or two.

"do not try this at home" me:seeing someone try it

I love these types of videos, keep making these awesome videos. I do also have some dangerous but cool ideas. One is you could try melting metal, or doing some experiments with liquid nitrogen.

So satisfying to watch! Great video as always!

If you take polystyrene foam....quite a lot of it..... and add some petrol to it the foam will dissolve into a sticky gel and that can be used as a joint filler on wood mixed with some sawdust or stone if you mix crushed kitty litter, tiling grout or plaster of Paris with it too.....it sets rock hard once the petrol has evaporated.

Good video! I cannot wait for subsequent movie film!

woow, that's amazing. love your videos!

Great video! Thank you for sharing!

i wonder if you can reconstitute the stuff, say to spray foam your attic? you would just have to aerate it and dispense it under pressure so it expands. i was also thinking of using this as an end coat butter between the joists in the old house before shoving fiberglass insulation. i figure if you can stop the small drafts and leaks this might work for prepping some of the areas? what do you guys think?

What kind of watch is that that you were wearing?

That looks just like the plasticizer that was used in Wonder Bread!

0:52 he YEETEEDD out the bug of the table

It just looks even cooler when U put big pieces in there 👍😂

if the acetone is not on the slime then can you use it as styrofoam glue?

In two years ull see people swinging in the city because this can literally be used as web fluid

If you have xylene (not a very friendly solvent), and add about 5% - 10%, it turns the "gel / slime" into "polystyrene paint" - and you can also add pigment (I used coloured silica). Lastly if you add 1% or so of glycerol (baking glycerine) it works as a plsticiser and the product when brushed on and dried remains slightly flexible. Xylene is not a safe solvent to touch (or inhale / drink etc), but like most chemicals, used carefully, can be useful. Some "mixed solvent thinners" might also convert the slime into "paint" too - as it will contain xylene / toluene etc.

Is this a safe way to reduce before recycling styrofoam if I do it outdoors? Any toxic fumes?

this would make for a fantastic magic trick!

You could also use rubbing alcohol, and gasoline or acetone to make this sticky stuff

No I'm pretty sure the acetone just boiled away mostly because it has a fairly low boiling point. I'm sure there is still some acetone in the putty but the majority probably boiled away

Very satisfying, keep up the great work!

Wow 😮 love your videos 👍🏻

I was wondering if I can put this into ABS plastic to make decorative mounds? 🤔

It is cold because acetone is a very very very fast evaporating solvent and that's a byproduct of fast evaporation. Your gloves were melting because you were putting them in acetone. What you have there is not gooo it is melted plastic and when it dries it'll become hard plastic. When it's melted in acetone like that you can mold it in any shape you'd like!

wow so interesting keep it up!

Oh my God, we made this when I was 5 on a science field trip and I got a severe migraine and blacked out. I thought it was milk with something, but it was this exact consistency.

Alternate title: How to make napalm

What can you se it for?

We did that today and we got to play with it!

I believe this is actually how filmmakers created the acid blood effects in the Alien movies

I think that it is so cool that the slime melt the glove that is soo cool!! Also where can you get the liquid that melts the foam?

It would be interesting if you made a composit with coffee grounds mixed in.

Good way to reuse certain plastics.

Styrofoam mix in to gasoline can dissolve quickly. We used to it as adhesive glue for crafting materials.

What are the thermal properties of the left over goo? Could it be used to create a effective moldable cold pack for injuries?

The way you just picked up that bug 💀. I COULD NEVER -

That is what you get for giving me goosebumps

When the Playdoh box says 2 Years and up but you eat it in under 5 minutes H A C K E R M A N

I have a chemist question, when mixing acetone and Styrofoam together it makes a slime. Will it eventually dry up? PLEASE ANSWER

This is so cool!

Wow this is looking like magic

Hello! This is amazing, I am a part of a college club where we are trying to recycle Styrofoam using a similar method. Would love to be guided by you and get in touch!

Cool video man

Check out all the burns on his arm, dude is legit

would it be possible to reshape it into something useful afterwards? For example could i reform it into a plate or a cup? I am thinking of trying this so i can turn styrofoam trash into something useful.

Don't use the molten polystyrene lava in the fork with it because it can make the for And forks it's also made out of polystyrene

I tried at home before 2008 before 10 years. I was playing with it while i was young boy

You can also use gasoline like my mom also do this as a improvised rubberd cement

I love napalm xD

I do this to dispose of styrofoam. Styrofoam takes up soooo much landfill space!

So... What's the ratio of acetone to Styrofoam (oz/ml acetone to lbs/kg Styrofoam)?

That.s really cool

Can someone tell me how to make a liquidy napalm

Essa massa que vc fez qual a finalidade poderia traduzir em português

can the slime be hardened and later re-used?

what is the chemical equaction and what are the products in this experiment?

How do you safely dispose of the styrofoam blob?

Im gonna try this at home

This guy: thats crazy

Kids, don't do that please. This Slime not just normal Slime, but it is Napalm B. Napalm in generall is higly flamable and was used in wars to kill.

Would like to see what it's like in it's dried out state, how much shrinkage there is, workability etc..

totally trying this at home.

I got a nail polish containing acetone (Dimethyl Ketone) but it didn't melt styrofoam cups. Why do you think so?

Accetone is very expensive. is there any other liquid with which i can dissolve it ?

0:52 did anyone see him kill the bug?lol

I need to know how effective at adhesion this is?

I lovw your videos

Hey ! Someone dissolved the styrofoam with acetone and made a glue from it. Pls confirm it.. thanks

Uhm, hey. What kind of acetone are you using? Like is it a 100% percent acetone?. Just asking for some research purposes. I hope you answer ASAP☹️ THANK YOUU

I did use this method to make the slime but it won’t last long, it gets harden

0:52 rip bug

if i were to do this at home . Is the main danger it catching fire? Does it catch fire on its own or does it require it to come in contact with a flame? I do not smoke and do not have open flames in my home. I am aware that styrofoam is flammable. How about fumes? I have never worked with acetone before but i am aware that it has an odor. I work with chemicals such as Sodium Hydroxide which I use to make soap, Phosphoric Acid which I use to remove rust, make fertilizers, and wash dishes, and HCl which i mix with aluminum foil in order to produce hydrogen gas so i can fill up balloons. I am aware that the sodium hydroxide reacts with water and create nasty burns if i were to touch it. I am aware that the hydrogen that is created when i mix aluminum and HCl is combustible if it were to come into contact with a flame.

This video is gud, gud job, Yayayayaya!!!

Interesting concept. As a plastic modeller, I can see this as something that can be sculpted into a terrain or building and letting it dry. Is this stuff still flammable after it's dried? I'd imagine it's the presence of acetone that makes this basically napalm?

I like how even though you are wearing a lab coat, basic scientific phenomenons seem to completely baffle you

do you have to wait it out cos rn its not working

C O O L B E A N S 👌🏻

What did u pit in the bowl?

Dissolve Styrofoam can reuse in concrete mix?

What is difference between thermocol and Styrofoam.

I have a lot of polystyrene from Samsung. Now I know what to do with it, have some fun, and trash it without taking up disposal space!

Does it solidify after?

Say BOOM.

Can you touch it without gloves?

It's interesting how it dissolves so fast but still it doesn't dissolve completely to form a clear solution. Perhaps the longest chains are left undissolved?

Or how to make polymer

Ok werere done, LET'S DO SOME MORE

Yeah it melts to the glove

I think I would wear a respirator