Ditch Temu! 14 Cheap Tools On Amazon
Рет қаралды 266,627
Күн бұрынAfter making my video on cheap tools from Temu, AliExpress and Wish, people had expressed concerns giving their sensitive info to these services. So I looked for some products that are there but now also sold on amazon. I started with 10 purchased products but Going Make sent me a bunch of items for free and honestly there are a lot of nice ones so I included them (full transparency)
1. Qiguch66 pocket hole clamp - $11.30 - amzn.to/3Tlp3iV
2. Fnicel - Precision pocket rule - $9.99 - amzn.to/4bXLFNT
3. Daydor bench dog clamp - $29.99 for 2 - amzn.to/3T3Wbu9
4. Vonzen Hand Jack - $7.99 - amzn.to/3P583uD
5. Goingmake corner clamps - $29.99 for 2 - amzn.to/49JBXgC
6. Zhonna Manual wire stripper - $26.88 - amzn.to/3P9cftC
7. Going make - concealed hinge jig - $49.98 - amzn.to/3IrwYFd
8. Jaocdoen Countersink Bit With Limiter - $7.49 - amzn.to/3wPz4vS
9. GOINGMAKE Shelf Pin Jig - $32.85 - amzn.to/4a1C86t
10. Yakamoz Self Centering Doweling Jig - $12.99 - amzn.to/4a2da6S
11. JCFANTS 3D Carpenter Square - $13.99 - amzn.to/3PbKzUZ
12. Going Make 3D Carpenter Square - 24.99 - amzn.to/3uZeHvJ
13. Going Make Thing Rip Jig - 28.88 - amzn.to/3P8x9sN
14. Going Make T-Square
12in - $25.98 - amzn.to/49HDqDX
24in - $49.99 - amzn.to/3TnryBs
32in - $59.98 - amzn.to/3V8YJdm
We are a new channel and would eternally appreciate if you like our content to like and subscribe so we can continue to make great content for you! You can subscribe at / bitnerbuiltwoodworking
FIND ALL MY TOOLS HERE! My amazon Influencer store! #Commissions Earned
www.amazon.com/shop/bitnerbui...
As an Amazon Influencer, I earn from qualifying purchases
Contact us for business inquiries at: Justin@bitnerbuilt.com
Like us on Facebook at / bitnerbuilt
Now On Threads @Bitnerbuilt
@markmiller-summer473 2 ай бұрын
Justin, my first visit to BBW. Very impressed with your calm, easy to follow descriptions. Your commentary and critiques provided guidance that was easily digested. I’ll be back…
@BitnerBuilt 2 ай бұрын
oh that's great to hear thanks mark!
@lendevonuk5479 2 ай бұрын
Justin, my only surprise is that you don’t have 100k viewers already! Your presentation is second to none, concise, clearly spoken and always good content! The video quality is as good, if not better, than I have seen any where else on KZfaq! I for one hope you will continue to for many years to come! Keep up the good work! Len (Devon 🇬🇧)
@BitnerBuilt 2 ай бұрын
Wow thank you Devon! Very kind of you! ✌️🇬🇧
@mr.b.4048 2 ай бұрын
Liked and subscribed. Found your presentation relaxed and refreshing to watch. For some reason no comments box, so jumped on here. 👍
@rcrogers6 2 ай бұрын
Yo
@mr.listener8580 2 ай бұрын
Ditto! Just watched and subscribed. Love that you don’t go on and on about yourself and other repetitive stuff. YOU PREPARE. AND companies like woodPECKERS charge ridiculous amounts for their products. I couldn’t comprehend why it should cost so much, now I know it doesn’t have to, and I can afford some gadgets that would be helpful without feeling ripped off and angry. Thank you very much. Woodworking is expensive enough.
@BitnerBuilt 2 ай бұрын
Thanks! Yea I personally “can” afford all the big expensive stuff but honestly you feel that you have to treat them carefully since you spent so much, there are lots of good reasonable options out there!
@KnotboredWoodworking 2 ай бұрын
Video quality is brighter and clear than previous videos.
@BitnerBuilt 2 ай бұрын
Ah cool good to know thanks!
@rmora1 2 ай бұрын
At what resolution are you watching, because the 480p and below is a bit grainy and lagging, that could be because of youtube's transcoding though!
@rayj217 2 ай бұрын
Video quality and sound is great. I did enjoy your comments on the tools that you were showing. For the most part they were decent quality and helpful in the shop. Not all tools have to be expensive, good job showing us the tools of the trade.
@BitnerBuilt 2 ай бұрын
Oh great thanks so much!
@billinfallon2634 2 ай бұрын
Another awesome blog... Thx! The picture is really crisp! 🎉 Audio is also great... Have a great day... Waiting for the next one 😊
@BitnerBuilt 2 ай бұрын
Awesome thanks!
@karenalefounder4083 2 ай бұрын
Video quality great. Very clear, colours awesome and sharp. 5hanks for showing the tools and giving a honest review.
@BitnerBuilt 2 ай бұрын
Oh cool thank you!
@thomasalison6188 2 ай бұрын
Video quality is excellent! I bought the Going make concealed hinge jig recently, haven't used it yet, but I was very pleased with the quality of it. Thanks for the excellent tool reviews!
@BitnerBuilt 2 ай бұрын
Thanks and good to hear the same on the quality of the jig!
@JaCk-bj6hs 2 ай бұрын
Video looked good to me. Your reviews are excellent and as a result you are my go to source for guidance on tools I think I need. Thanks
@BitnerBuilt 2 ай бұрын
Oh wow thank you so much! Always try and give some good honest feedback
@ernievan7745 2 ай бұрын
Great reviews, straight forward, no nonsense ,not holding back to good , bad, or "ugly " and in-between. (from the uk)
@BitnerBuilt 2 ай бұрын
Thanks!
@terrereed218 Ай бұрын
Video was/is fantastic. I love the way you explain quality, price, and functionality. Glad I found your videos
@BitnerBuilt Ай бұрын
Oh wow, thanks so much!
@leenoble7472 2 ай бұрын
I think the video quality is great. Thanks for buying and checking out these affordable tools.
@BitnerBuilt 2 ай бұрын
Thanks very much!
@jakehodges9247 2 ай бұрын
Video quality is excellent. Content even better! I am ordering several items that you reviewed. Very helpful, thanks 👍
@BitnerBuilt 2 ай бұрын
Oh thanks very much!
@user-dk8nc6hc5s 2 ай бұрын
Thanks for the tool review, certainly very helpful. Your new camera equipment quality looks really great.
@BitnerBuilt 2 ай бұрын
Oh thanks so much!
@Koyote9mm 2 ай бұрын
Lighting is awesome, audio is great, really nice video and enjoyed the content. Thanks Justin!
@BitnerBuilt 2 ай бұрын
Oh sweet thank you very much!
@nothankyou5524 2 ай бұрын
Nicely done. Very nicely done. Helping an SIL with some work. Going to purchase some of these and leave them with them. The balance I'll purchase over time, so as to not overwhelm him and/or her. Thank you very much. Would love to see more if you have time. The quality of the video is top shelf. Thank you for that as well.
@BitnerBuilt 2 ай бұрын
Thanks very much!
@charlesstokes2184 2 ай бұрын
Your video quality was already amazing but yes it is even better now. Thank you for everything you do!
@BitnerBuilt 2 ай бұрын
Thanks so much!
@RYwoodview 2 ай бұрын
Excellent picture, good reviews. Thank you, Justin!
@BitnerBuilt 2 ай бұрын
Awesome thanks!
@franklinkarrass5830 2 ай бұрын
Thanks for sharing this information. I’ll be looking for other videos of yours👍
@BitnerBuilt 2 ай бұрын
Thanks so much!
@cohall46 2 ай бұрын
Very enjoyable video and I learned several things from it. I like your delivery and pacing. Thanks for sharing.
@BitnerBuilt 2 ай бұрын
Glad you enjoyed it!
@tomvetterani9653 2 ай бұрын
Justin - video quality is very good. Combined with great lighting, it sets a great contrast in your shop. BTW - I like the Going Make brand of tools. A lot of bang for the buck!
@BitnerBuilt 2 ай бұрын
Oh, thanks very much. Good to hear! Yeah, I wasn’t familiar with them before and I was hesitant about showing that many tools of theirs in this video because they were provided but honestly you can’t go wrong with milled aluminum stuff. I like their tools as well and some good creative additions to their designs others dont have
@larryhoffman8813 2 ай бұрын
Everything is very good…video, sound, lighting and content. Thanks so much!
@BitnerBuilt 2 ай бұрын
Oh awesome thanks so much!
@brianwaites4572 Ай бұрын
Brilliant channel and top notch quality! Look forward to more of your stuff. Cheers 🇬🇧
@BitnerBuilt Ай бұрын
Thanks Brian!
@phile6609 2 ай бұрын
Fantastic video quality. As a beginner woodworker, the inexpensive tools will be purchased for "learning." It's always good when someone else does the footwork for ya. I will be going to Going Makes for some of these. Thanks
@BitnerBuilt 2 ай бұрын
Thanks! Yea definitely quality for the money
@rcrogers6 2 ай бұрын
Excellent lighting and video quality. Sound is natural. Good job on reviews.
@BitnerBuilt 2 ай бұрын
Much appreciated!
@Gizmoimages 2 ай бұрын
Excellent sound and video quality. Also good information. I'm a fan!!!
@BitnerBuilt 2 ай бұрын
Awesome, thanks so much
@rauljr9869 2 ай бұрын
Great presentation, very informative & detailed to the pros & cons of each item! Excellent, well done!
@BitnerBuilt 2 ай бұрын
Thank you kindly!
@user-dq6kx7ex9b 2 ай бұрын
Great picture quality! I appreciate the reviews also.
@BitnerBuilt 2 ай бұрын
Thank you!
@dtork47 2 ай бұрын
Great video quality,very helpful and informative as always. I am tempted on some of those options? Thanks and stay safe.
@BitnerBuilt 2 ай бұрын
Thanks!
@NWGR 2 ай бұрын
Video quality is great, no worries there! I like those goingmake corner clamps and the concealed hinge jig. Adding those to the arsenal.
@BitnerBuilt 2 ай бұрын
Thanks! Yea they are some nice kit!
@larsmortensen 2 ай бұрын
As always a pleasure watching you. The quality of this video is very good, I enjoy watching it on a 100” projector screen, feels almost as being there in your shop 😅
@BitnerBuilt 2 ай бұрын
lol oh wow think I need to loose a few pounds before being on the big screen 😂
@chadfahringer7483 2 ай бұрын
Thanks for the tool review. The video quality was great!
@BitnerBuilt 2 ай бұрын
Oh awesome thank you!
@IlanDavid 2 ай бұрын
This is the first video I watched from your channel. when youtube fed me your video, I immediately noticed how bright and smooth the video is. 60fps is great. content was excellent and I like your soft mellow style. good job!
@BitnerBuilt 2 ай бұрын
Oh awesome great to hear! Thanks so much!
@mikegander305 Ай бұрын
Simple solutions to 2 of the tools. First one, the dowel centring jig. Scrap the bearings, they are only complicating the tool, simple friction pegs. Secondly, the 3d square, much like the overlooked scribe on a sliding combination square, the peg could simply thread into a dead space on the tool. Hope this helps. 👍🏼
@BitnerBuilt Ай бұрын
Thanks Mike yea I said the same to them on the square, needs a home (but one out of the way!)
@porkchop3094 2 ай бұрын
First time watching, great picture quality and fantastic tool review.
@BitnerBuilt 2 ай бұрын
Oh awesome thanks so much!
@Dalewolf777 2 ай бұрын
Nice video. Great content! Thanks for the in-depth reviews.
@BitnerBuilt 2 ай бұрын
Thanks very much!
@timothyweeks9023 2 ай бұрын
Excellent quality and loved your comments
@BitnerBuilt 2 ай бұрын
Oh thanks very much!
@paddyharte4677 2 ай бұрын
Excellent quality video . Great video review . Thanks
@BitnerBuilt 2 ай бұрын
Awesome thank you!
@nickgerner2920 2 ай бұрын
Thanks for the tool overview. I'm glad you included some duds. It's useful info when browsing junk, but also makes it clear that you're being thoughtful. Suggestion: on your amazon page have a list of your video stuff: mic, camera, tripod, lights, etc. Thanks as always.
@BitnerBuilt 2 ай бұрын
Thanks! Yea I’m not a rubber stamp guy, even good tool companies have some duds!
@pazmaniaoh6341 2 ай бұрын
Camera looks good, sound is great too. Keep up the great work, and thank you for the effort!
@BitnerBuilt 2 ай бұрын
Oh awesome thanks!
@playpadel5926 Ай бұрын
Excellent video - concise but very informative. Added to my subscriptions list.
@BitnerBuilt Ай бұрын
Awesome thanks so much!
@brucefaria6464 2 ай бұрын
I am a 1st time viewer and am very impressed with the content. Thank you Justin
@BitnerBuilt 2 ай бұрын
oh thanks so much Bruce! appreciate it!
@qmoonwalker3847 2 ай бұрын
Great tool review! Video and sound quality is great!
@BitnerBuilt 2 ай бұрын
Glad you think so!
@norm5785 2 ай бұрын
Nice video quality. I have the three piece ruler set, i agree they very good/useful tools for the shop. I also have the lifts, they are ok. Thank you for sharing. Everyone stay safe, warm, happy and healthy. From Henrico County Virginia.
@BitnerBuilt 2 ай бұрын
Oh awesome thanks very much!
@EricHonaker 2 ай бұрын
Not the first good review I've heard of GoingMake over the past few months. Definitely going to have to check them out. Thanks for the reviews. I like your no-nonsense, practical approach to these sorts of videos. I don't feel like I'm being sold something, just told about it.
@BitnerBuilt 2 ай бұрын
Thanks! I appreciate that. Yeah I’m always conflicted when company send me stuff to then promote it but honestly you can’t go wrong with mild aluminum for tools with durability and precision and a reduced price so I really have nothing but good things to say about that company honestly
@MrLeram12 24 күн бұрын
Loved the video. Only one tool caught my attention...the corner clamp. Many times I could have used the ledge feature.
@BitnerBuilt 24 күн бұрын
Yea the extra hand that gives you is 👍
@toyplayer2668 2 ай бұрын
Video quality great, comments, very useful. Only just been offered your site, and considering signing up. now looking at your back video's, which should clinch the deal. Brian in the UK
@BitnerBuilt 2 ай бұрын
Thanks Brian! ✌️
@cww922 2 ай бұрын
Enjoyed your video, quality of video (resolution) is sharp, well light, sound quality is excellent.
@BitnerBuilt 2 ай бұрын
Glad to hear it! Thank you!
@chriswindberg5010 2 ай бұрын
Video seems sharper, also, great content on this one. Will probably pick up a few of the items to try for myself!
@BitnerBuilt 2 ай бұрын
Oh cool, thanks so much!
@danieldibiaso9342 2 ай бұрын
Video quality. Rey good and thanks for the info on going make tools.
@BitnerBuilt 2 ай бұрын
Awesome thank you!
@jimrosson6702 2 ай бұрын
Great video Justin I have purchased one goingmakes tee square and it’s a great tool and going to buy the thin Rip jig next they are some great tools glad to hear your opinion on them. As a new woodworker can afford them other Red tools. The video quality looks great and the sound was great too.
@BitnerBuilt 2 ай бұрын
Thanks Jim, glad to hear you like it as well, honestly putting them next to my reds (I have a few) there’s no difference
@donaldenderle6036 Ай бұрын
My 1st viewing & you are explaining things very well !
@BitnerBuilt Ай бұрын
Oh thanks so much!
@MultiKENB Ай бұрын
Great vid fantastic picture quality😊
@BitnerBuilt Ай бұрын
Awesome thank you!
@billj5645 2 ай бұрын
video, lighting and sound were very good. the selection of cheap tools is also very good, several were interesting to me.
@BitnerBuilt 2 ай бұрын
Oh that’s good to hear and thanks for the video feedback!
@kasader 2 ай бұрын
This is a great video. The picture quality is far better than most and everything is easy to see due to the positioning of the camera. I found the content was very interesting, even though I wouldn’t use many of the tools reviewed. But I did watch it to the end because the presentation was done so well and its an interesting topic - things to look out for when buying such tools And thank you for not using music or trying to be a comedian. 10 out of 10 for this one. It’s only the second one that I have subscribed to though I’ve watched hundreds.
@BitnerBuilt 2 ай бұрын
Wow thanks so much for the kind feedback!
@circe42 2 ай бұрын
Thank you for another excellent video
@BitnerBuilt 2 ай бұрын
Glad you enjoyed it
@normanpiper4534 2 ай бұрын
Really great video, first time I’ve seen this in the UK.
@BitnerBuilt 2 ай бұрын
Oh awesome thank you! Always appreciate my views from over the pond so I do all my build videos in metric and imperial 😃✌️🇬🇧
@andrewbrown8148 2 ай бұрын
Great video review (with really good video picture quality)~! ;-) I've been a frequent-flyer buyer from "big red" and I'll definitely be picking up some of the GoingMake products. I'm also a fan of the big blue label, but I like that European hinge jig. Since I don't own one yet, I'll be going for the one you showed. Thanks for this one~!
@BitnerBuilt 2 ай бұрын
Oh awesome thank you! Yes that hinge jig is very nice, that company is making a good converted effort to make durable cheaper items but also innovate on the designs so I think they will be a player going forward
@Bernardgrubb 2 ай бұрын
I think the video quality is great. I watch on a 55" computer monitor and you look fine. lol. Another great video, love that cup hinge jig and ordered it. Keep up the great work. Thanks for all your research and information. All the best...
@BitnerBuilt 2 ай бұрын
Awesome good to know! Yeah, that really is a nice one, when I took it out of the box I was like yes! The built-in clamp is going to keep me from being lazy lol
@CourtneyDulany 2 ай бұрын
Video quality is very good; the tool selection was excellent.
@BitnerBuilt 2 ай бұрын
Awesome thank you!
@anaphylaxis2548 2 ай бұрын
The picture quality and sound are great! Thanks for the info. New subscriber here.
@BitnerBuilt 2 ай бұрын
Oh awesome thanks so much!
@batmanpaul1 Ай бұрын
First time I’ve seen one of your videos, great video
@BitnerBuilt Ай бұрын
Oh awesome thanks!
@workshop4898 2 ай бұрын
great video. I appreciate the detailed reviews on the bargain tools. The video quality was great.
@BitnerBuilt 2 ай бұрын
Thank you!
@ronkerouac309 2 ай бұрын
Looks great lighting clarity video
@BitnerBuilt 2 ай бұрын
Awesome thank you!
@Daniel-bw7ve 2 ай бұрын
I really like the new camera setup. Makes for a more professional content. I like your not bashing the not so well priced but well known products. Pretty even handed were your assessments. Thank you for your video.
@BitnerBuilt 2 ай бұрын
Thanks so much!
@joesalinasjr5225 2 ай бұрын
Very nice video work! Would like if you can make more close up videos of the tools.
@BitnerBuilt 2 ай бұрын
Will do. Thanks!
@ianbreeze-uh7wj 2 ай бұрын
You video quality is top notch and so are your videos keep up the good work.
@BitnerBuilt 2 ай бұрын
Awesome thank you!
@jerrygable877 2 ай бұрын
Video quality is excellent!
@BitnerBuilt 2 ай бұрын
Oh thanks so much!
@chrandersson8332 2 ай бұрын
Looking good!!
@BitnerBuilt 2 ай бұрын
Awesome thanks!
@sjgrabowski 2 ай бұрын
Good job…video quality was excellent.
@BitnerBuilt 2 ай бұрын
Thanks!
@janetcoursey6756 5 күн бұрын
Video looks awesome
@BitnerBuilt 5 күн бұрын
Thanks!
@ArsenMovsesyan 2 ай бұрын
Justin, thanks a lot for good tools review and suggestions. Helpful as usual. About video quality and equipment... Well, not so good quality, but that's not because of bad equipment, but most probably not configured well. For instance, was a little blurry then it was as usual. Play with different configs. Unfortunately don't know which equipment you purchased, so no specific suggestions.
@BitnerBuilt 2 ай бұрын
Thanks for the feedback yea I went from a iPhone which will have everything all in focus to a lens that’s going to give some depth and boca behind me, not sure if that’s the right decision but going to play with it a lot 😃
@bradrugh1429 2 ай бұрын
Great video - thanks
@BitnerBuilt 2 ай бұрын
Awesome thanks!
@edwardmacdonald5453 2 ай бұрын
Hi Justin first time viewer. very impressed with your video picture is crop and clear,I will be a regular viewer from now on as I tho enjoyed the content. Best wishes. Ed
@edwardmacdonald5453 2 ай бұрын
Sorry Crisp and clear Ed
@BitnerBuilt 2 ай бұрын
Wow thanks Ed, appreciate it!
@yanobou 2 ай бұрын
First time viewer so can say that vid quality was great. I appreciate the attention to safety issues.
@BitnerBuilt 2 ай бұрын
Oh great thank you!
@banto1 2 ай бұрын
I already have the small 3D square and the countersink that I bought direct from China. I actually use the 3D square quite a bit as it works well to scribe a perpendicular measurement to an edge that I can use to line up on the crosscut or panel sled. The countersink works well and does a nice job making a clean countersink on laminate. It does clog up a little from time to time, but worth the $37 difference from the pro tool. Never had a problem with a snapped bit. Thanks for the other reviews.
@BitnerBuilt 2 ай бұрын
Cool awesome thanks for the feedback!
@ricksevere4977 2 ай бұрын
I liked the tools and the video equipment is working really good
@BitnerBuilt 2 ай бұрын
Oh awesome thank you!
@jeffp5991 2 ай бұрын
Video looks great! And thanks for the tool review. Now I'll go spend some money that I hadn't planned on so I can save some money! 😂
@BitnerBuilt 2 ай бұрын
Haha always fun buying new tools 😅 thanks!
@ralphe5842 2 ай бұрын
Video and audio are excellent very professional
@BitnerBuilt 2 ай бұрын
Much appreciated!
@chrisc4217 2 ай бұрын
Very crisp video!
@BitnerBuilt 2 ай бұрын
Thank you very much!
@sulaimanvanderschyff6564 2 ай бұрын
Fantastic quality
@BitnerBuilt 2 ай бұрын
Much appreciated
@evertkleynhans2617 2 ай бұрын
One day, when I'm grown up, I'll be able to make videos like yours....👴👴 Great lighting, focus , sound quality, not to mention the excellent planning and narratives...👍👍👍
@BitnerBuilt 2 ай бұрын
Haha well thank you very much, very kind!
@Fitchett2012 2 ай бұрын
Thank you for the video. By chance, have you come across a shelf pin jig sized for shelf pin sleeves?
@BitnerBuilt 2 ай бұрын
Not specifically but it hasn’t been super on my mind. I’ve used them only one time and know that you have to use a 9/32 inch drill bit (at least the one I used) and I just checked the going make wouldn’t take that. I’ll keep an eye out! I just used the regular jig and then went back and re drilled but obv not the best solution
@mikelangland9858 2 ай бұрын
Very nice picture! I also liked the edit when cutting the plywood. No micro jig.... poof micro jig :) Like you said, a safe cut
@BitnerBuilt 2 ай бұрын
lol indeed!
@griromero 2 ай бұрын
good video, both image and sound, and content
@BitnerBuilt 2 ай бұрын
Many thanks!
@Realism91 Ай бұрын
I usually watch KZfaq on my phone so I've never had a complaint with video quality, it still looks good.
@BitnerBuilt Ай бұрын
✌️
@louisrucci6043 2 ай бұрын
Video and audio quality is excellent. I think you didn't go long enough. Looking forward to the sequel.
@BitnerBuilt 2 ай бұрын
Haha thanks!
@Ekrindul 2 ай бұрын
Video quality looks great.
@BitnerBuilt 2 ай бұрын
Awesome thank!
@colincrooky 2 ай бұрын
Excellent, thank you. I enjoyed your comment on the plastic hinge tool that “the holes have got bigger because I have used them”. 😂 That is where you slipped up - you used them! The tool would have lasted a lot longer if you hadn’t.
@BitnerBuilt 2 ай бұрын
😂 I know right how dare I use the tool lol. Glad you enjoyed it!
@danieldulany4879 2 ай бұрын
Good video very sharp.
@BitnerBuilt 2 ай бұрын
Thanks 👍
@r6f09 2 ай бұрын
Camera, personality & presentation are great
@BitnerBuilt 2 ай бұрын
Wow thank you very much!
@Amerzel 26 күн бұрын
Awesome video, will definitely be adding some of these to my amazon wishlist. With the self centering dowel jig, wouldn't it be more stable if you had it rotated so that the ball bearing's are held up against the wood in the same direction that the drill bit is spinning?
@BitnerBuilt 26 күн бұрын
Thanks, I tried it in both directions, but just adding a ball bearing on there means that it has easy movement any direction. Some people had made the suggestion to use a punch or a Brad drill bit so it has that small little spike, that helps prevent wandering, even in normal drilling situations
@randymartin2396 2 ай бұрын
LOOKING GOOD
@BitnerBuilt 2 ай бұрын
thanks!
@kenerickson4923 2 ай бұрын
I love my going make thin rip jig. You can even use it in T tracks.
@BitnerBuilt 2 ай бұрын
Yea the additional attachments make it versatile!
@samh9072 2 ай бұрын
Hey Justin. Thanks for the useful content. Video quality seems fine. I was happy to see you address T squares because I can’t go with the big red company prices but disappointed you cut and ran so quickly. I’m assuming since you gave them a thumbs up the construction and accuracy was spot on ?
@BitnerBuilt 2 ай бұрын
Yeah, I didn’t want to make it the going make video, you know, since those things were sent to me. Yes, definitely thumbs up, all three squares. When I did set up at the table saw came out perfectly square and flat. I always set those up using the miter slot on the table saw so you can make sure that you’re perfectly square over the long distance, before you torque down the assembly screws.
@samh9072 2 ай бұрын
@@BitnerBuiltgreat! Thanks for the response
@donniehodge2548 Ай бұрын
Good video Thanks
@BitnerBuilt Ай бұрын
Glad you enjoyed it
@bud1412 Ай бұрын
O yea, good video and sound, very professional looking.
@BitnerBuilt Ай бұрын
Much appreciated!
@johnnylinoleum 14 күн бұрын
Nice video!
@BitnerBuilt 14 күн бұрын
Thanks!
@dansmith344 2 ай бұрын
First time viewer. Video quality is very good.
@BitnerBuilt 2 ай бұрын
Thank you so much 🙂 and welcome!
@glenschumannGlensWorkshop 2 ай бұрын
Video seems fine to me. Thanks for doing this. I often wonder if any of the cheaper off brand tools are worthy.
@BitnerBuilt 2 ай бұрын
Great, thanks! Yeah, with the cheaper stuff it’s always a hit or miss as I tried to show in the video, too, I really do feel, though that a lot of the tools that are made out of mill aluminum are really great in precision and quality, and aluminum pretty cheap so it’s hard to go wrong there
@jimmywalker2693 2 ай бұрын
I am a tool nut and have over $50000.00 I my tool box plus my tool box was over $8000. And you have as great a video honestly giving great opinions. When you make you living . Then it best to use best you can get even as you showed . Price is not always the best but common sense that some people need to look at before buying
@BitnerBuilt 2 ай бұрын
Thanks jimmy well said
@HanNguyen-vb3eo 2 ай бұрын
Perhaps, you can post your home address along with this novel 😢
Flynndogg Woodwork
Рет қаралды 264 М.
Woodnote Studio
Рет қаралды 20 М.
Shop Ramblings
Рет қаралды 171 М.
Виталий Смирнов
Рет қаралды 3 МЛН