DIY - 15000mAh Power Bank - With Salvaged Batteries (gets charged with 3A)

Рет қаралды 684,637

5 жыл бұрын

Hello and welcome back! In this episode I will show you how to make a 15000mAh power bank, which is very small for its capacity and it can be charged 3 times faster than regular power banks.
Instead of XL6009 I suggest you use the MT3608 boost converter, it's much stable when the cells get low on power.
If you are a nice lad and want to donate to me on PayPal, here you go: melcumlk@gmail.com
My Patreon campaign: / sorindiy
My Facebook page: / sorindiy
My Instagram: / sorin.diy
Power Bank schematic: i.imgur.com/FK5mMaU.jpg
These are the components you need:
TP4056 charging module: s.click.aliexpress.com/e/_9hTxou
MT3608 boost converter: s.click.aliexpress.com/e/_DdF...
Battery Indicator: goo.gl/n7tmXQ
Small battery indicator: goo.gl/w1Ygs2
10 ohm Resistors: s.click.aliexpress.com/e/_Dmm...
microUSB/USB port: s.click.aliexpress.com/e/_DkM...
Switch 2 Positions, 4 Poles (12 pins): s.click.aliexpress.com/e/_A4onvZ
Plastic case: s.click.aliexpress.com/e/_Ddg...
If you enjoy my videos, hit the Subscribe button!

Пікірлер: 843

@Sorin_DIY 2 жыл бұрын

UPDATE: Instead of XL6009 I suggest you use the MT3608 boost converter, it's much stable when the cells get low on power.

@jhonyg100 Жыл бұрын

Xl6009 latest model instead of MT3608 how is possible?

@dellalioussama1124 Жыл бұрын

i have a question , how many cells i can solder to one module ? tp4056

@settingshadow Жыл бұрын

@@dellalioussama1124 2 cells max

@mitezuss Жыл бұрын

3 more secure

@mitezuss Жыл бұрын

R value? (link dead)

@DaveHojo 3 жыл бұрын

The project is amazing in general but the wizardry of getting all of that in the enclosure was the real brilliance!

@ProgrammerSheep 4 жыл бұрын

Thank you for not putting crappy background music.

@nunyabiz2016 3 жыл бұрын

Yes and the narration is outstanding. This is a great video. You got skills mane

@kalleklp7291 5 жыл бұрын

Finally, someone comes around and shows HOW a decent power bank is made DIY. You made a superior product, so in my opinion, it doesn't matter if it's just a little bulkier.

@computerjantje 5 жыл бұрын

Thank you for another real nice video. Also your english is very good and easy to understand.

@DrZipZwan 5 жыл бұрын

agreed

@FrumentzSefridus 5 жыл бұрын

i just wanted to say the same.. lol

@shiblupicklu9524 5 жыл бұрын

Lol. Same cmnt i was going to

@VijayKumar-hv7qm 4 жыл бұрын

Get all the parts of power bank

@anthoxel 4 жыл бұрын

this man know what he is doing, keep the work! for me as a newbie, this is explained very clear to me.

@NotGonnaSayFO 5 жыл бұрын

I just love the way you do things! Its not factory looking, but makes it more real for those of us messing in the garage!

@gabrielflorit4470 5 жыл бұрын

A really well made video. I liked A LOT the fact that you used fuses on each 2 cells group instead of just connecting them straight in parallel. This is the kind of DIY videos I like. Keep up the good work!

@kacpreusz9911 5 жыл бұрын

My phone stopped overheating after watching this video! Great job, Sorin! Greetings from Poland.

@notyourtipicaltechguy6438 4 жыл бұрын

My compliments on the ways you think about the safety components of a build like this!

@rattehalliravishankar1801 3 жыл бұрын

this is the excellent diy powerbank I have ever seen in youtube. This is very eazy to build and your video is perfect to build the powerbank. Hatsoff to your idea and design.

@nowoneknowsme 5 жыл бұрын

There is no way someone can make a better video on how to make a powerbank. I really like that you pointed out the difficulties someone may encounter with such a project. let's all hope that the other channels out there will do the same in the future.

@wadebrewer7212 5 жыл бұрын

I do like the idea of cell balancing in this way. Pretty unique, and honestly, simple. I feel a little stupid for not thinking of it on my own.

@tenchicks 5 жыл бұрын

Best powerbank build i have seen so far way to implement protection to make sure there is no rish of explosion or anything

@princedmedia 4 жыл бұрын

Good explanation and easy to understand language at a moderate pace. Very useful video. Thank you Sorin. One of the best video tutorial with near to exact and real values. Best of luck on your journey of spreading knowledge.

@alinalexandru2859 5 жыл бұрын

Bravo omule greu mai gasesti oamenii pricepuți ca tine mai ales in romania

@michals8351 4 жыл бұрын

Very good job 👍 I like that you're measuring and comparing overall parameter stability.

@GrimReaper-kr6je 5 жыл бұрын

Excelent execution on the explaination, I've understood it much better and much deeper, now i can move on to my future power generator projects that is completely pended for a very long time,my big problem is batteries, because they have limitations,excelent job man and thank you

@vmaxzile 5 жыл бұрын

Really cool thanks for sharing, I will try one when I get through a few chapters in my Electronics for dummies book. 😁

@GENERALWA5TE 5 жыл бұрын

Yey, it's been a while since your last video. Great video as well Sorin ⭐⭐⭐⭐⭐

@casabombn 4 жыл бұрын

I love the circuit simplicity. Thank you very much 😊

@hajarsazrultravel6942 5 жыл бұрын

i must say brother u r one of the world most organised and standard and clear human..... and for me honestly u r one them from today "MY PERSONAL UNKNOW FAVOURITR's' .........tq

@muhammadsalau7014 5 жыл бұрын

I thumbed you up because you are a great DIY-beginner friendly Engineer.

@PBatADA 4 жыл бұрын

Schematic at 5:04 . Thanks Sorin!

@af1023 3 жыл бұрын

Excellent work Sorin! Thank you for sharing

@adrianharris9091 4 жыл бұрын

Clever design and a brilliant instructional video. Concise and informative. Thank you.

@onkarshikhare31 5 жыл бұрын

Bro your projects are awesome I love watching ur videos they are clean diy .keep it up

@Randellallen65 5 жыл бұрын

I love watching your videos. Thanks for the good quality content...

@sorinancuta2257 5 жыл бұрын

felicitari,mai rar oameni care sa fie interesati de asa ceva,mai ales in Romania!

@NarutoUzumaki-zt5vr 2 жыл бұрын

New subscriber here, most of your videos are clear and amazingly explained sir. Thanks, I'm learning a lot from you.

@dooder126 2 жыл бұрын

Wow, very impressive work. I think I might give this a go, seems like a fun project!

@ToolDroidGaming 3 жыл бұрын

Happy 76k subscriber🥳🎉 You deserved more subscribers

@sketchylife8062 5 жыл бұрын

finally, diy build with datasheet keep it up

@ninkovich 5 жыл бұрын

Yeah dude most informative channel way better then the other ones

@noor0346 4 жыл бұрын

Power Bank with full electronics research and precautions, Great 👍

@therealjordanvo 4 жыл бұрын

I made this power bank! Confirmed working and a great way to create a DIY USB 2.0 Power bank. I think I need to get a better boost converter but it otherwise charges my phone and works as a powerbank.

@bosmanragga51 4 жыл бұрын

These are the guys who make stuff we buy from the shops

@pedrotomcat8232 5 жыл бұрын

Remember, safety is number one priority 🤣

@cryptout 4 жыл бұрын

best diy powerbank yet!

@arnoldlewandowski413 5 жыл бұрын

Perfect !!! That's what I was looking for for a long time.. I liked, subscribed and I will share your channel ! Kind regards :)

@quantumraider8148 5 жыл бұрын

Sir Sorin your videos were very interesting and creative. Thank you for making these videos. I hope you make a video on how to salvage a lcd of a defective laptop. I would like to see your version of it coz the other videos arent that good like yours. Thanks in advance.

@cggnow 5 жыл бұрын

You might like the one by DIY Perks here: kzfaq.info/get/bejne/ecyZpbR0np_cgJc.html

@electronicshelpcare 5 жыл бұрын

your work is so clean and clear. and you are a genius, really I like your work so much.

@joshuvajohnvarghese2372 3 жыл бұрын

Same as you ❤️

@nounouberbez 5 жыл бұрын

Excellent 💯 Même en anglais on comprend très bien merci beaucoup 👍

@TopicsInControlSystems 5 жыл бұрын

Nice video. Very good engineering work.Keep it up ;)

@electronic7979 5 жыл бұрын

Excellent project

@belalsmart7138 3 жыл бұрын

Really you are the best , we missed you since a long time , waiting your new video's.

@quantumraider8148 5 жыл бұрын

@Antovin33 5 жыл бұрын

Thx! Now i can build my own powerbank with faster charging

@dilipdeep4741 5 жыл бұрын

Wow, you have made a good power bank

@Bianchi77 Жыл бұрын

Nice video shot, keep it up, thank you for sharing it:)

@renqing.l5306 5 жыл бұрын

自己做一個比買一個成品貴。非常感謝你的電池倉DIY視頻。

@tomgoffnett5624 4 жыл бұрын

Nicely done. Thank you for sharing your knowledge.

@droquesteni 5 жыл бұрын

Thanks sir for all the work and sharing! God bless you and family! Cheers|!

@lahmyaj 5 жыл бұрын

Nice video mate. Subscribed 👍🏻

@nicolasmaureira440 5 жыл бұрын

Nice effect resistor, thanks

@OlympusHeavyCavalry 5 жыл бұрын

Nice job bud, Cheers and keep up the good work :-)

@KaganRustem 3 жыл бұрын

Great project! I'm going to give something like this a go!

@netrapatil2169 5 жыл бұрын

sorin...ur videos motivate me.love all videos watch again and again

@sinhnguyen4815 4 жыл бұрын

I love it. Go Sorin! You have to use the hell out of it to improve it.

@renzenryuken5542 5 жыл бұрын

Now, this is what i'm talkin about. I'm about want to make by my own using tutorial in YT, but non of them tell if the PowerBank itself have protection....And lastly, i found this, GG

@valdomirosilva4127 5 жыл бұрын

Congratulations on the great video

@saidalkhudry6502 5 жыл бұрын

Nice, next video i hope you make a mini powerhouse for camper. Thanks

@taunteratwill1787 5 жыл бұрын

As usual great work! :-)

@davos7454 5 жыл бұрын

Foarte tare! Tine-o tot asa!

@bebevlad3674 5 жыл бұрын

Bravo Sorin!👏

@HighwayDamage 5 жыл бұрын

... just ordered the parts :) thanks for the shematics, i didnt know i could actualy connect all the negatives together :D

@Sorin_DIY 5 жыл бұрын

hi. I suggest you use this step up converter: goo.gl/8HEsQ2 it's much stable, when the cells get low on power, than the one I've used in the video. and don't forget the 12 pins switch.

@CCG0D 4 жыл бұрын

@@Sorin_DIY can you help explain the wires in the 12 switch? I still have trouble understanding it. Thanks in advance!

@polishedspectre4116 5 жыл бұрын

Omg Sorin your awesome as usual

@LaxmanSingh-id7wq 3 жыл бұрын

U are the best Well explained Best maker Love from India ❤️

@jaromircihlar8218 5 жыл бұрын

Cool project! Many thanks.

@yet_another_communist 5 жыл бұрын

This diy power bank is very good, with some updates can get better, I'll do one, for sure (if I can get money because the situation of Brazil is a bit difficult here).

@sayanpaul8837 5 жыл бұрын

Thanks for this ... I will try to make one .

@raykinsella78 5 жыл бұрын

Great video, your a legend!

@muhammadsalau7014 4 жыл бұрын

Now, do you think that these beautiful ideas can also be applied to other batteries? Kindly build an 8S20P or 4S10P powerall using Headway Lifepo4 40152s 3.2v 15ah Cylindrical Battery Cells pls.

@akirahkhie8843 2 ай бұрын

Good day..can i ask..if its ok my old powerbank 3pcs battery use your 1.5amps fuses and 10 ohms resistor? Im just a beginner and i want to make like your powerbank too

@torianblair3362 5 жыл бұрын

More geniuses helping out the minorities 🙏thank you friend I will share at my school my teacher is going to be surprised Monday morning😂😂😂😎✌

@paulrautenbach 5 жыл бұрын

Good build. I like it.

@PedroOliveira-eu1sw 5 жыл бұрын

I would like to know the nomenclature (values) of the fuse and the resistors?

@DoomiNuw 5 жыл бұрын

Awesome dude, next can u make PB with more capacitiy and quick charge feature .

@sanjeevrajane2764 3 жыл бұрын

Extremely talented

@aldodu4475 4 жыл бұрын

Thank you for this great video, really great

@subhajitchakraborty951 Жыл бұрын

Thanks for uploading bro... I will definitely try this..

@subhajitchakraborty951 Жыл бұрын

Can you plz make a pwm controller for rs775 motor?

@Edmorbus 5 жыл бұрын

thanks for sharing

@stevenjoseph5736 5 жыл бұрын

Hi, I have an anker power bank with power iq 2.0, how can I modify it for power iq 3.0 or qc 3.0 for fast charging?

@neirodrigues4159 5 жыл бұрын

Excelent Project !

@aussiecrocs1 Жыл бұрын

amazing video 😄

@DiamondBackPL 5 жыл бұрын

What aout charging coding? Its possible to give full power charge to samsung phones (5V/1,7A)?

@cypresstwist 4 жыл бұрын

Fain de tot. Mă bucur că am dat peste canalul tău. Chiar acum o jumătate de oră am demontat o baterie veche de laptop și mai am vreo 3-4 prin casă. Am să scot modulele din toate și-am să le verific să văd care mai sunt bune.

@kurddata5228 4 жыл бұрын

Nice work

@MyOwntuahur 4 жыл бұрын

awesome project

@akirahkhie8843 2 ай бұрын

Good day..can i ask..if its ok my old powerbank 3pcs battery use your 1.5amps fuses and 10 ohms resistor for TP4056 module charging board..

@pleasecho2 5 жыл бұрын

I thought you couldn't connect all the negative terminals of TP4056 modules together when using a common power source?

@LatokB0m0HrocK 5 жыл бұрын

Nice video. I enjoy it so much. Why don't you create your own spot welder for your next project?

@loverforever4473 5 жыл бұрын

Good job my friend 👍🏻👍🏻👍🏻👍🏻

@_AlgisDalgis 4 жыл бұрын

I bought a few smaller boost converters, but it drops voltage above 1A. I'm thinking about connecting two of those boost converters in parallel, to double current. There is a diode before +Vout so it should be ok, right?

@Sorin_DIY 4 жыл бұрын

hi. I don't think it's better if you use 2 step up converters. I changed the step up converter with this model: goo.gl/8HEsQ2 it can deliver almost 2A at a stable 5V. or you can use a more powerful module: www.aliexpress.com/item/32885492747.html?spm=a2g0s.9042311.0.0.27424c4dSAW36f

@AD-ng4mz 5 жыл бұрын

Very nice. Thanks for sharing.

@travelstartsfromsg5702 5 жыл бұрын

Very smart solution

@sergiotequidalozoya3875 5 жыл бұрын

I wish you uploaded more videos

@Sorin_DIY 5 жыл бұрын

I'm not using NCR18650B cells in this clip, I'm using NCR18650. please watch the video carefully and don't misinform the viewers.

@WarriorRev6300 2 жыл бұрын

Nice tutorial, can you please fix my provlem that my phone is discharging when I connect to this.

@janzahradnik8089 2 жыл бұрын

This is very good power bank. The power bank have a fuse, when chip have short circuit, blow the fuse not shorted the baterry.

@UltimateNox 5 жыл бұрын

very nice work

@GustavoBica 5 жыл бұрын

Hi! I'm going to try to this but with 4 18650 5000mah 3.7v , is there anything that I need to change from the material that you used? And I also saw that in terms of safety I should use fusible wire, which type should I use? Thank you, and great video!

@Sorin_DIY 5 жыл бұрын

hi. it depends how do you want to charge them. with 2 or 4 charging modules. you can group them in 2 pairs, and charge them with 2 charging modules. you can use a smaller switch, with 3 poles instead of 4. I haven't use fusible wires recently, I don't know what to recommend you. but about those cells with 5000mAh.. I don't think that capacity is real, they are fake. the best cells I've seen are Panasonic NCR 18650B with 3400mAh. anything bigger than 4000mAh is fake.