r/ihadastroke ??

@@JoeyLovesTrains r/nothisfirstlanguage ??

@@amosimo8527 r/subsifellfor

John Chrysostom when doing big projects like these, there is bound to be roadblocks or something not going just right. There is no getting around it, no matter how good at electronics you are. If he managed to do this whole thing with nothing left to truoubleshoot, I would be beyond amazed.

@John Chrysostom Every innovation projects are facing for bugs & issues. But with the patients, corrections some of them are achieving the goals successfully. Thats what I wanted to tell him & how thankful I am for this.

TL ??

What is the name of this program? 5:28 Tell me please

@@TheSCUBIDUBI the name of the PROGRAM is SOLID WORKS

1

@@theperfectionist4702 yeah, does he have blurry vision?

Most useful commentary

I've completed it and posted some pictures of it in the made section in the thingiverse link provided in the summary. kzfaq.info/get/bejne/prGedcJyvuDTeoU.html Many of the parts and components used were different than the recommended components. This was mostly due to error but I had to make them work. Unfortunately, this meant that I had to redesign many of the existing files. Thankfully all the cad files were provided and easily modified with Fusion 360. I got a 10 watt fast wireless charger instead of the recommended 5 watt. This will charge wireless devices twice as fast but it was larger than the recommended. The charger actually needs 9 volts instead of 5 volts to use it's full potential. I used a mini step down converter (purchased 10 by mistake) to drop the voltage from the battery down to 9 volts and soldered the power cables to the wireless charger. This way, I don't need to turn on the usb charger switch to turn on the wireless charger. I also got RGBW (additional White Light) instead of RGB and the controller was larger. These upgrades required the top compartment, and outer shell to require modification. The inset for the wireless charger circuitry had to be pushed more toward the center of the device and some of the dividers needed to be removed in the top compartment cover. The outer shell was changed too. I pushed the target circle for the charging back to it's new location, holes were relocated to match the new outputs of the lights and RGBW controller hole was changed to be more clean. I made a new switch cover and completely closed the hole that is usually on the top. I had to modify the IO plate a decent amount. All the text had to be enlarged and they had to be put in a bit deeper. I also had to enlarge the hole and add some cutouts for my outlet plug as my plug had side tabs, which meant that I needed no glue. I also had to lower the LED hole for the inverter my 4 mm. I literally printed about 11 or so IO face plates till it got it correct. The usb 3.0 charger I got was much smaller than the one recommended so I made a adaptor tray with a thermostat slot for the new circuitry to sit on. The CC/CV buck converter was also different and had no screw holes so I used some high power 3M double sticky tape to hold it down. I had a spot welder so no copper strips were needed. I had some nickel strips which I used. Fortunately my inverter already had heatsinks. I used some pretty good cells that tested out to be great on my iCharger 1010b+. On my first test, the capacity came out to be 17,226 mAh @ 11.1 Volts or 191.2086 Watt hours. Does it seem low? 191.21 Watt hours is about 52,000 mAh at 3.7 volts if I were to show the capacity like most scumbag sellers do. Only thing left is to properly print the badge.

He said 20 amp fuse but the screen said five amp fuse

@@PlateInStock He said 20 amp, the schematic says 20 amp and he used a yellow fuse which is 20 amp. Use a 20 A fuse.

as a noob and only knows how to solder and has a 3d printer, it would be nice if you make a separate video tutorial step by step guide on how to assemble this. i can only copy cat/ monkey see monkey doo things honestly

saaame

was thinking the exact same thing when i saw this.

I'm in.. +1

@@NightForce hell yes

Lets make this guy have a happy retirement

exacly what I need. I dont need cosmetics. I need raw performance. Sell me one? ;-; Kickstart it? It could be really really really awesome kickstarter campign....

It's not ugly though lol

@@BlowitAllUp It's not beautiful, it's ASTRONOMICALLY BEAUTIFUL

You should honestly see his first version. This is like 10 000x times better :D

@hXcFreethinker nice to know, I hope he makes a version that does not require soldering the batteries

@@elixier33 have you tried it

Goal Zero calls this type of thing, a Generator, because this turns battery output, to AC line voltage, to normal Outlets. I have a "Yeti 400". It is a battery/powerbank/inverter, and this charges up via outlet, or solar panels, by Goal Zero.

A power station generates electricity. This doesnt.

@@TigerManGaming i think he meant station as in a larger capacity system. You are right though, power stations are technical names for transformer stations and generator stations

Im wondering now wht i watched

Hahahaha hasaucha solti ley. Same here bro.

same lol

It's hypnotic... I can't do that... I can't do that... I could maybe do that.. but I'd burn the house down.. I can't do that..

@@goldcd Indeed, its' unreal reality!!! )

I wanna order it

He missed the fact that 18650s are bad for sparking or exploding it's what people use in vapes and when it was wired wrong it blew up part of there face. I wouldn't recommend using an old one by any means

@@Im_the_Trashman_ god.. That's scary

@@Im_the_Trashman_ name brand 18650s are perfectly safe if you don't short circuit them and don't exceed their discharge current. They are certainly safer than the Li-ion batteries inside your mobile devices.

nah... it has rgb.

Hello Friend! kzfaq.info/get/bejne/iLl6ja2J382-gaM.html

Not very often do these DIY projects actually take into consideration the level of safety and understanding this guy has

Did you make it?

I feel the same exact way lol

@@thomastownsend8510 I feel the same ja ja ja ja ja :) :) :)

feel like I could make one if I want the biggest problem is the getting my hands on a good 3d printer

@@twisteddarkdays8150 I wanna a make one too but who said you need a 3d printer just make it from plastic sheets and hot glue lol

i could make it, but i feel like its gonna blow up if i did

Hey bro are you interested to sale it

Sell the Power Bank itself!

friend, you are amazing!

100% Copy will be sold in China in like 4 Weeks! no BS..

Better get a WW Design-patent ASAP! just sayin..

Behave he brought it all of eBay 😂😂

Especially

well he did miss a bit .... but stopped the video in editing to mention it ;)

Lmao😂

what are you talking about he said nothing like that

@@DragonsREpic Go back and look (not listen) at the Shipping to Hogwarts for $3.62. Its part of the checkout screen. Pretty funny

ive worked on electronic project since i was kid and this looks hard AF!

how you understood this if you didn't try? do you think other people was born with this knowledge and skills?

Me too

because your brain is telling you. TRY IT :D

Me too! You lost me at hello! LOL!!

Agreed

same here if you every decide to sell them let me know i will buy for sure.

I want one!

я бы еще подсветку настроил в тон индикации зарядной платы

Why would you mind building things like this, without owning a 3d printer?

Akhilk 99999 just go to a local library that has one

@@floofyboii6034 3D printers are still not a thing in my country

They aren't too expensive. I picked up my Ender 3 for $170. I've printed RC model planes with 40 inch wingspans in parts on it and flown them. It's so worth it.

@@kevinrdunnphs "Aren't too expensive" "Only for $170..." Inb4 I get roasted for being cheap, yes I get it's an investment for a highly specialized machine. I was just making a joke 🙏

thought so too, like solder on the relais and every dc-dc and inverter boad cables to the marked pins on the pcb would hae been much easier and probably also not as cluttered

Way to much wiring mess and he also used unnecessarily thick wires i mean like too thick they didn't need to be that thick because active cooling and short wiring

Hmmm. PCB my first question. Second: Why diode? Use P-Channel power MOSFET. Third: Why Relay on output? Use P-Channel power MOSFETs.

@@kralyn3d but you could also have Used through hole components and relais dont fail often.

@@kralyn3d JLPCB is extremely inexpensive, and could always just use through hole instead of surface mount