For all the naysayers, I tried it and it works. In my experience, the oven thermometer was not accurate because the entire thing needs to be inside the oven. I used a meat thermometer and poked it through the side. My parts are cured so thank you!

I know this is old and a lot of the comments are sarcasm about how dangerous it is but it does work. I used a method like this to bake open my headlights. However, instead of putting the hole for the heat gun in the top, I put it on the side and made it big enough to where the heat gun nozzle doesn't make contact with the box. The heat gun pointed up diagonally, away from the headlights. I also didn't line it with foil but it still worked without a problem and I didn't leave it unattended.

I will try to use the principle whit a plywood box ,thanks so much you gave me great ideas. It could be any length any shape to accommodate the part

Thanks .you just saved me a small fortune. Brilliant.

Wtf this is the best channel ever! Keep uploading

I learned how to do this in boy scouts. Had a couple coals in the bottom. Baked a whole cake in 15 mins.

Very clever, and creative. Thanks 👍

Thanks for sharing this, what a great idea, I used it today

It's a great idea. How long should I keep the pieces of fairings inside and at what heat, to have a nice banking and hardening of the coats, especially the protective transparent?

Doing wheel Drums? Just prop a heat gun. 1. lay drums on top of eachother, separated by some type of thin spacer (i use 2 wood shims). you simply want the hollow space between drums. 2. point the heat gun through the middle axle hole on top. might need to prop the handle with something. No need to cover any holes or gaps. No need to cover it. Drums easily reach 200F. Temp adjustable gun could help, as well.

SMART!!! THANK YOU....

This is a amazing idea. The box heated up to 200degrees in like 3 minutes

Easy Bake would be proud

could I use a propane grill

That's cool, because it's hot!

i thick if you had a window shileld you could make one that would last longer thanks for the ideal i wont get in trouble for useing my mom' stove

Is the glue that you applied is used also for sealing the box or it just to hold the aluminum?if it just to hold the foil,can i use thumbtacks instead?Thanks.

Nice!

Ty! some Metal housing with isolation Would raise it to 200 C np, need to try :D

Holy shit I think the was the first video of yours I ever saw

How long did it take for it to reach highest stagnant temperature

I'm gonna try so this better not be a prank lol

Isn't there a risk to damage the heat-gun,especially when the heat-gun is directed-down inside the box?

Bless you sir as you are a gift from baby jesus him self

Can i bake a lasagna in this?

can you please send me the name of the temperature indicator /measure becease I intends to buy it

Aren't you worried about cardboard catching fire? For instance at the point where cardboard connects with heatgun?

Does this work if the temperature on the back of the can says 600° F

What’s the divider for 8:14 ?

How long does it retain heat?

Is your house still standing or have U burnt it to the ground yet?

Maybe I’ll make this and also heat up firebricks with my firepit and put them in

Won't reach 600F for my needs

I can see no flaws here, nothing could possibly go wrong. I'd suggest emptying out a pillow into plastic bags, spread about an inch thick and tape them to the box for insulation.

Warnock add ruined it

WTF !

Darwinism at work!!

How to burn your house down in one easy step.