I really appreciate this video. I'm replacing my screen right now and your video is a big help. One thing, though, for anyone about to attempt this replacement: WEAR GLOVES! My screen was delaminated more than the one in the video and that adhesive gets EVERYWHERE and it's really hard to get off. It would've been nice if you showed, or even said, how you dealt with the adhesive, instead of just saying, "I cleaned it up." I'm using a paper towel and just kinda wiping the worst of it off. It's not working very well, so if anyone has a better idea... *update* I ended up using a microfiber cloth, which left less fuzz behind than the paper towel. And when it came to putting it all back together... First of all, I did it on my desk rather than on a car seat, which makes the whole process much easier. Then I got my Wi-Fi antennas plugged back in, set all of my stand-offs in place, and carefully lowered the cover (with the circuit board) onto the front part. I held onto the black port on the back to keep the circuit board and the metal frame together while I lowered it. Lastly, I very carefully slid each screw into its hole and once they were all in place and I was sure everything was lined up, I tightened them one by one. Great success!

Thank you so much for this! Just finished replacing my screen on my 2018 Compass. This saved me $600 since the dealership wanted to replace the entire radio.

Dude your instructions were spot on! Just changed out my daughter's screen and thanks to your video it was a breeze! God Bless!!

Thank you so much!! I just replaced my screen and your video was super helpful! Lifesaver

Looks like this is a common issue with the LCD's on the jeeps. I have a 2018 compass having this exact issue. I just ordered the screen off of Amazon. Thanks for sharing this.

I just saved $1,500 thanks to you!!! 🙏🙏🙏

I have this problem also on my 2018 Compass. The good thing is that Jeep is replacing this for me under my 6 year warranty. Getting it replaced on Tuesday. Horray.

THANK YOU THIS HELPED ME SO MUCH!!!!!!!!!!!

My compliments for your clear and detailed video! I would appreciate another video showing how to disable the Uconnect data channel towards Stellantis the hardware way: I mean how to disconnect the UMTS antenna.

This video is amazing thank you so much. I was ready to do it myself until you got to the motherboard and those parts came off 😂

Is the glue from the lcd because it melted or is that always on there and not something to worry about? Would appriciate it.

Thanks, man! Worked perfectly and just as you described. One problem: my new screen picture is not centered anymore. Any idea how to fix that?😢

Dont happen to have video how to replace 7 inch screen, the connects are different and cant get screen touch to display but can hear clicking when touch screen buttons. Replaced with new factory replacement part for screen

hey. Thank you for your video. Can i ask if this screen works also for Jeep compass 2017. The manual said that the screen is Uconnect 8.4/8,4 NAV but i don't know what kind of screen must order.

Do the tuning/power knob and volume knob still work? I'm wanting to replace my screen so I've been researching and I've read some stuff about how the tuning/power knob and the volume knob no longer worked.

I've got this issue, I'm going to carry out the repair myself following this video however I am concerned that the new screen I fit will end up doing the same thing at some point. Have these screens been adapted to prevent the issue happening again?

It looks like the 7-inch screen sold on Amazon is a little bit different from the one in the video. On Amazon the screen doesn´t have the screws fitting in the back. Are you sure that the product is the correct one?

What a great video. I have a 2018 Compass. What is the part number for the screen?

more 300.000 jeep compass 2018 on detorit have the problem the display screen dont show all screen complet

I have a 2017 Compass Trailhawk with an 8.4” screen. It’s given me issues for years and I have finally had it. The lcd acts like there is a loose connection or solder. When I hit a bump it’s fine but instantly has lines. I have sat on replacing it since it worked but had lines. Now I want to replace it and have had a hell of a time finding the right part. Must 2017’s had the smaller 7” screen and the dealership says $1400 for a new unit plus labor. I think not! Hopefully this video helps. I’m waiting on a new lcd now! Fingers crossed b/c I have had it!

Hi, I have a 2018 Jeep Compass; my screen has had lines running through it since the summer. After the car cooled off, it would be fine; touch is still responsive. Now it is winter where I live, and when I turn my car on the screen has lines on it, and while the touch screen is still responsive you can't see anything until about 30 minutes of the car being on, everything works normally again even the backup camera. Would this be a screen issue or a wire issue? I read somewhere online that it could be a a wire but I have no idea what wires to order just incase. I don't want to open it up and not be able to fix the issue Thanks in advance

great video man thank you for the info I was going to take the car to have it done but I know I can do it now.

Thanks for the video. Does the Display has to be original or it doenst metter?

Great job! Where did you get the new replacement from? I have the same screen but I can’t find a new replacement. Help!

Thanks, great video. Where can you get new screens?

Great instructions. Just installed a new touchscreen and everything works. The only problem is the GPS. It shows as if I was in the middle of the ocean. Do I need to reset it or something?

I'm having a problem where half of the screen is blacked out from time to time. The touch still works and sometimes the screen works fine, do i need to just replace it?

Did you have to purchase both screens? Which screen is for the Uconnect?

love your video I have a Jeep Compass Latitude 2018. the radio screen turn white white lines of different colors then black do you think is same screen the one i need to change and do you know the part number is 7'' screen. Thank you very much

Hello, I have a question, my Jeep screen started to turn half black until it stopped, so could that be it?

Mine that i ordered didnt have stand off screw points on the replacement screen

Hello. I installed the new screen and it worked, that same day later on it did not turn on. The following day it turned on and now we are back to not turning on. Do you know if perhaps its a faulty screen or is there something I need to reset?

Thanks for the video. Where can I buy a screen?

Where did you buy this lcd with replace in my Jeep?

Thanks it worked but screen is a half inch to the right what's displayed on the screen

Question... My Uconnect screen still registers my touch and still works but there is no picture. Is that just the LCD panel that needs to be replaced or something else

You could use a little di-electric grease at the base of the stands offs thatll essentially keep them "glued" in place and you wint need to worry about them consistently falling over

Question. Im having the same problem with the screen, would like to replace it, but not sure if mine is a 7” or 8” how do I find that out? Don’t want to buy the wrong screen. Thanks

I did the same but my camera is not working. How I can fix that?

Where did you get the LCD from?

✅ No need to remove all the boards and cables. It is enough to unscrew the five screws on the back side and remove the frame from the display. That's it! you can already change it easily.

Replaced the screen but ghost touching still happening. Not sure what to do.

Mudei o meu em 5 minutos era só virar ao contrário sem ter que tirar isso tudo

🤣🤣🤣