DIY 3.5" Intake Install for YOUR G35 / 350z!
Рет қаралды 11,539
Күн бұрынDIY 3.5" Intake Install for YOUR G35 / 350z! in this video we create our own 3.5 inch intake that is worth the diy work! you save money, full cold air intake, and no tune needed for the 3.5 inch intake unlike the others in the market! this is insane!
My car is a 2004 Infiniti G35 Coupe 6MT Brembo Package Desert Platinum and has Muffler Delete exhaust
Follow my instagram at @thejoevazquez
SUBSCRIBE FOR MORE G35 VIDEOS! kzfaq.info?sub_...
WATCH THE PREVIOUS G35 VIDEO! • EVERY G35 Owner Do Thi...
Mod List:
Motordyne 5/16 plenum spacer
Motordyne mrev2 lower plenum
BC Racing True Rear Coilovers
Spec D Led Headlights
Nismo Z tube with JWT Pop charger intake
CZP 3.5" Aluminum Driveshaft w/ Foam Noise Dampening
Dasaita 10.2 inch Large Screen Double Din Android
Oil catch can
Custom Cutout exhaust
06-07 Updated Tailights
Hotchkis Adjustable Stabilizer Sway Bars
Roof wrapped in aAvery gloss black wrap
Idler pulley delete
19" Forged Rays wheels
Reverse camera installation
Installing The LARGEST G35/350z Air Intake! The turbo killer
BUDGET INFINITI G35 INTAKE!!
G35 Cold Air Intake Install
DIY R35 GTR Coil Packs Install on a G35 / 350z!!
G35 3.5" ADMINTUNING Intake + EPS Breather Kit Install (2022)
Check out my podcast! Chip & Joe Show: / @chipandjoeshow5205
g35 meet,joe vazquez g35,infiniti,350z,infiniti g35 review,g35 build,nissan,g37,g35 review,370z,vq35,infinity g35,joe vazquez,static garage,g35 exhaust,car vlogger,top g35 mods,g35 coupe,g35,g35 muffler delete,infiniti g35,g35 short shifter,g35 mods,g35 coilovers,infiniti g35 coupe,g35 headlights
Infiniti G Joe Vazquez g35 coupe mods g35 mods g35 muffler delete infiniti g35 infiniti g35 coupe 2004 infiniti g35 coupe g35 headlights g35 tail lights infiniti g35 muffler delete G35 Coupe Tricks - Key FOB and Interior Tricks Small Upgrade EVERY G35 Owner NEEDS!! G35 How to Program Key Fob!! Top 3 G35 Mods EVERY Owner NEEDS! How to program a Infiniti G35 remote key fob 2003 - 2006 HOW TO PROGRAM G35 KEYLESS REMOTE * G35-Top PERFORMANCE MODS* Installing My Spec D Headlights On My G35!! How to program Infiniti Keyless Entry Remote Keyfob Replacement Programming 3 Things to Help Maintain Your G35!
Small Upgrade EVERY G35 Owner NEEDS!!
BEST First Mod EVERY G35 / 350z Should Do NOW!!
The MOST Useful Thing EVERY G35 / 350z Owner NEEDS!!
Android Stereo Install | Infiniti G35
Watch This BEFORE Buying 75mm Throttle Body for your G35 / 350z!!
One of the MOST Overlooked Parts on YOUR G35 / 350z!!
Top 3 G35 Mods EVERY Owner NEEDS!
Looking for G35 content? How to make your G35 sedan or coupe faster? What mods to buy and how to install them onto your VQ? Whether you have a Infiniti G35 coupe or sedan, THIS is the channel for YOU! The content goes from the G35 getting a muffler delete to a custom exhaust! To installing performance parts and top mods from Motordyne, Z1 Motorsports, Concept Z and showing you how to replace ball joints and control arm bushings as well as common problems with g35's like oil consumption.
My name is Joe Vazquez and I am a G35 Enthusiast. I want to be able to learn and show everything about g35's! I want to make it simple to repair and work on your own g35 whether you have one or ready for when you buy one! You will get tips, tricks, how to, reviews, gadgets and more in this channel to help make your g35 the very best for you!
My car is a 2004 G35 Coupe 6MT Brembo Package Desert Platinum and has Muffler Delete exhaust
Infiniti G Joe Vazquez G35 cars, sports cars, motorsports
VQ35 INFINITI NISSAN CAR VLOGGER 350Z
This video is for entertainment purposes only. This channel Joe Vazquez assumes no liability for any repairs or modifications performed by the viewer as a result of the information contained in this video.
@JoeVazquez Жыл бұрын
thank you guys for watching! go ahead and check out the G35 shirt i made!! www.goagainst.co preorders end on 8/8/22!
@jayjom8656 3 ай бұрын
I just did my cold air intake and this video helped me out big time keep them coming thank you so much
@jerrywilliams6820 Жыл бұрын
This was a great idea for a cold air intake in 3.5 inch very well done. I’m in the process of making a custom 4 inch carbon fiber intake for my DE but it will be bolted on to my Holley hi ram intake manifold with a 90mm throttle body. It cost quite a bit the route I’m going but it will push the DE over 300 wheel without cams and other supporting mods exhaust pulleys ported lower injectors etc. really great idea you come up with on that 3.5 inch intake
@alansalinas5711 Жыл бұрын
Keep up the great content! Just got myself a 04 coupe and I’ve loved watching your videos! Helps me learn since I’m not too mechanically inclined. Great honest videos!
@JoeVazquez Жыл бұрын
Everyone starts somewhere! It’s how far do you want to learn about cars and a just do it mentality, the rest comes with time!
@joseayala1069 Жыл бұрын
Great content bro been watching for min,can’t wait to build my 07 coupe. Look up to u nd one of buddy’s as far as build quality goes
@jaycoop85 Жыл бұрын
Love the videos! I'm modding my 06 350z RevUp on a budget and you've helped a lot.
@JoeVazquez Жыл бұрын
No problem man! You got it 💪
@eman_vq8036 Жыл бұрын
Heck yea Joe with another vid 🤙🏽🤙🏽 can’t wait to see your tune !!
@JoeVazquez Жыл бұрын
The tune is long overdue haha
@theg35channel Жыл бұрын
So awesome to see you grow as you inspired my channel and now I’m only 44 subscribers away from 1K seeing you build your own stuff for your car now it’s so amazing nothing but love bro!
@JoeVazquez Жыл бұрын
Bro congratulations! The first 1k subscribers is the toughest part I promise you! I’m happy you found inspiration the same way I did when I first started, fall in the love with the craft of making videos and trying to help the community and you’ll see the results for yourself! There will be obstacles along the way but that’s the fun in it! Hope this all helps, best of luck brotha ❤️
@theg35channel Жыл бұрын
@@JoeVazquez Appreciate it
@michaelrod482 Жыл бұрын
Cold air intakes are great especially injen until u get caught driving in the rain 🌧
@omegabku1480 Жыл бұрын
Thankful I found you brother 🤝
@slickvq Жыл бұрын
Dope videos bro. Should also definitely get the middle plenum and lower intake runners ported as well 🔥
@JoeVazquez Жыл бұрын
I was thinking about doing that aswell!
@otsu3801 Жыл бұрын
cam here from the video of u racing the 2020 civic, glad to find some g35 content
@JoeVazquez Жыл бұрын
Thank you bro!!
@GoodVibes-qg4ko Жыл бұрын
Can you make a video showing what the fuel trims should be for short term and long term with the intake you installed? Curious if it affects running lean or rich.
@everything4053 Жыл бұрын
Late but where did you get that adapter that connects to the mass air flow housing, would appreciate the reply and good vids man keep it up👌
@TheGamingProject805 Жыл бұрын
Mad proud of you joe-Tommy
@JoeVazquez Жыл бұрын
Thanks qt! ❤️
@tainocolon5572 Жыл бұрын
Hi Joe quick question, (I feel like saying Ask Joe a question lol) the 3.5 custom maf pipe you made. Is there a way to provide dimensions if possible. I was about to purchase the Injen intake and seen this video. I appreciate all your work you do for the VQ platform.
@josebolanos1148 Жыл бұрын
Keep it up bro!
@JoeVazquez Жыл бұрын
You’re the man! 💪🥳
@vq.krisss Жыл бұрын
bro I'm going crazy for what to buy to start the 3.5 intake with! what is the pipe or tube you use from the throttle body onto the intake?
@hyoomahn Жыл бұрын
Awesome. What did you do for the pcv on the intake?
@blackoutgaming7848 2 ай бұрын
Did the 45° pipe through the bumper fit between the bumper and the crash bar without having to modify the crash bar? I know most aftermarket intakes (specifically for HR) you need to cut your crash bar to fit the intake
@vqserna9879 Жыл бұрын
Keep up the videos man👏🏽👏🏽🫡
@JoeVazquez Жыл бұрын
You got it! 🙏
@sambojoe4797 11 ай бұрын
Hello can you send me links to all the mods for the cold air intake please. I have a 2003 350GT I'm from Australia.
@davidgonzalez6155 Жыл бұрын
Donde puedo comprar la tuberia 3.5mm para nissan 350z????
@kozie3345 Жыл бұрын
can u list all the parts and cost of this I have 70 dollars to spend rn and my intake just blew off so i cant drive it till i have a new one. I have a 06 350z rev up
@GBKICKS1 Жыл бұрын
What angle is the pipes leading into the bumper ?
@damiencoffey2391 Жыл бұрын
Nice mod! I"m just too lazy to have uninstall that filter in lower bumper area and have to wash it when it gets dirty.
@JoeVazquez Жыл бұрын
Haha I feel you 😭
@gerodriguez1993 Жыл бұрын
Do a DIY for a vented hood on your stock hood throw some mesh into it and get that heat out!
@JoeVazquez Жыл бұрын
I kinda have an idea for that that’ll look a little more oem!
@fadez1 Жыл бұрын
did you have to take off the wheel well?
@nationaloutlaws4818 9 ай бұрын
Where’d you get the piping?
@luismichael256 Жыл бұрын
I want to get one and the throttle body maybe the platinum spacer after
@JoeVazquez Жыл бұрын
You will not regret it! If I could only pick one I’d most likely do plenum spacer but it’s real close between that or the 3.5 intake!
@jakeallen5760 Жыл бұрын
i know you havent posted in a month but i wanted to let you know i got my shirt and i love it, my only thing is, for the next run of shirts have the decal be a little softer, i get it youre still a smaller channel and this is your first merch so im just giving you advice. again, still love the shirt and will still support obviously
@JoeVazquez Жыл бұрын
You got it! i wanted the shirts to be very detailed and in turn by doing that the print had to be vinyl which is a bit thicker and has a different texture than what we’re all use to! I plan on improving for the next drops so I appreciate the feedback bro! ❤️
@jakeallen5760 Жыл бұрын
@@JoeVazquez like I said, I still love the shirt and the details came our perfect. I'm happy with the shirt. Much love man.
@JoeVazquez Жыл бұрын
Of course bro! One thing you will notice is it won’t crack with a couple washes in comparison to screen printed shirts! The way it looks will stay for a very long time!
@jakeallen5760 Жыл бұрын
@@JoeVazquez where are you out of? I'm trying to see if I would be able to bring my g out and get a couple pics.
@JoeVazquez Жыл бұрын
Yeah bro I’m from Ventura county California!
@gerodriguez1993 Жыл бұрын
What do you think about making it to fit in front of your grill like a VHR aftermarket intake on your G35?
@JoeVazquez Жыл бұрын
That would be awesome but unfortunately the ac lines are in the way! I was about to do that until I realized it wouldn’t be possible!
@GBKICKS1 Жыл бұрын
Wait so what was the part you mentioned you said you need in order for it to run good ? When I bought the car It came with it full intake tube and ran good the guy I purchased it from said not to mess with it cause it was sensitive and took awhile to make it work and if I mess with it may not run smooth.... I had to change my valve cover gaskets and ever since then my car doesn’t feel the same wondering if that’s ThAts my issue ! My car feels sluggish I’ve tried to clean throttle maf did the relearn still feels sluggish
@JoeVazquez Жыл бұрын
From experience, cleaning these Nissan mafs messes them up. I’d recommend getting a new maf sensor hitachi brand! And also the part is the oem maf housing!
@Gslidin Жыл бұрын
How’s the max speeding rods test pipes holding up? Would you recommend those test pipes for fbo?
@JoeVazquez Жыл бұрын
Still working great! I would if you’re not particularly picky about sound, they are pretty raspy!
@mynameiswhat960 Жыл бұрын
Make a shirt for us guys with a g35 sedan !!!
@JoeVazquez Жыл бұрын
I may have to next drop!
@mynameiswhat960 Жыл бұрын
@@JoeVazquez looking forward to it
@rhngo18 Жыл бұрын
Currently have a g35 and a 3.5 intake sounds like a good idea but i’m just not ready for the tune (want headers and a better exhaust) what’s the cost of building this intake ?
@JoeVazquez Жыл бұрын
Under 200!
@kennyb1451 Жыл бұрын
Hey Joe where did you get the piping from? I would like to do this to my 06.
@JoeVazquez Жыл бұрын
It was a website called ace race parts!
@kennyb1451 Жыл бұрын
@@JoeVazquez thanks brother!
@Louie_Rodriguez Жыл бұрын
Could you drop the link to where exactly you picked up that intake man! I wanna go the same route with my 350z
@JoeVazquez Жыл бұрын
I got it from a site called ace race parts!
@Louie_Rodriguez Жыл бұрын
@@JoeVazquez Found the website❕ Thanks Joe. I assumed you bought the intake complete, I was unaware you pieced it together. I’m sure a lot of us would appreciate a follow up video of you discussing every single part you will need to make this Frankenstein intake work. Part links would help so much. I want to replicate your intake set up🔥
@JAYVsG35 Жыл бұрын
Are you still running the oem clutch and flywheel?
@JoeVazquez Жыл бұрын
Yes!
@euankay6518 Жыл бұрын
I might sound dumb, but is this safe for your engine to drive with the intake in the rain?
@JoeVazquez Жыл бұрын
There’s a product that’s like a little sock over the air filter, and what it does is repel water so if you’re worried about rain, that can help give a bit of ease. But if you go over puddles with a good bit of water, I would be careful since the sock can only do so much!
@Tommikegetitright101i Жыл бұрын
Get ISR long tube headers
@JoeVazquez Жыл бұрын
I kinda want them haha
@projectsinistermotorsports4704 Жыл бұрын
Where did you get the maf housing ?
@JoeVazquez Жыл бұрын
It’s the housing that comes with your car but you can buy one from Rockauto, or just about any auto parts store near you!
@projectsinistermotorsports4704 Жыл бұрын
The 3.5 inch maf housing?
@JoeVazquez Жыл бұрын
I made it!
@jacquesredhead8171 Жыл бұрын
What diff do you have?
@JoeVazquez Жыл бұрын
Nismo diff! 3.9 gears
@doozy4402 Жыл бұрын
How tall are u?
@JoeVazquez Жыл бұрын
2foot3inches
@SwervooShiestyYt Жыл бұрын
I don’t recommend doing this easy way to blow any engine up especially if u live in PA where its always raining and dirt all over and pot wholes you will blow your engine sucking water up and dirt up
@JoeVazquez Жыл бұрын
You obviously have to do your due diligence but here in Cali, that’s not an issue and k&n filter is washable so you can wash it every once in a while and you’re good
@SwervooShiestyYt Жыл бұрын
@@JoeVazquez yeah Pennsylvania is wack with all the rain and dirt all over and pebbles but understandable , im getting a g35 coupe 03 with 120k what do u recommend to do first can i get your insta to show u how it looks (doesnt look the best color wise buh ill change it up eventually )
@joseayala1069 Жыл бұрын
Bro I work @Injen
@JoeVazquez Жыл бұрын
That’s awesome
@junieruiz32 Жыл бұрын
Bro what are you doing you can order at 3.5 inch from Z1 Doesn’t make any sense of going 3,5.then 3 Back to 3.5 you’re losing not gaining
@JoeVazquez Жыл бұрын
Did you watch the whole video? I said I’m keeping it like that meanwhile, that way I can keep driving the car (daily) and also drive it to the dyno, THEN I’m swapping the 3 with the 3.5 maf housing so I can get tuned like that.
@tainocolon5572 Жыл бұрын
Which 3.5 @Z1 will work on a DE G35?
@junieruiz32 Жыл бұрын
@@tainocolon5572 yes I have a 3.5 on my de
@krishernandez2943 Жыл бұрын
First
@JoeVazquez Жыл бұрын
youre too quick dam it!
@krishernandez2943 Жыл бұрын
@@JoeVazquez always for the bros vids 😎
@JoeVazquez Жыл бұрын
Let’s goo 🥳
Nikita Zdradovskiy
Рет қаралды 6 МЛН
Scary Teacher 3D Gaming
Рет қаралды 51 МЛН
Z1Motorsports
Рет қаралды 12 М.
Антон Маляр
Рет қаралды 1,6 МЛН