DIY 3D Arch Backdrop for Bridal Showers, Weddings, Birthdays

Рет қаралды 25,467

Күн бұрын

www.etsy.com/listing/15114125...
www.etsy.com/shop/MakerDecor
Products - makerdecorshop.com
Digital Plans available here - www.etsy.com/shop/MakerDecor
/ makerdecor_
makerdecorations.com/
I have been working on this 3d arch backdrop for a long time. I tried a couple of different ways to find the simplest way to make this backdrop. There are so many ways to make it, this is just one of the ways I think breaks it down the best for new Makers. This DIY 3D Arch Backdrop is great for Bridal Showers, Weddings, Birthdays and more. To make this 3/8 bendable plywood is needed. hope this helps you find what is best for you and good luck!
The links below are Amazon Affiliate Links and I may receive a small fee if items are purchased through links.
LINKS TO TOOLS BELOW
makerdecorations.com/tools/
makerdecorations.com/led-link...
makerdecorations.com/led-links/
Neon LED Strip amzn.to/3oHFPbN
Power Supply amzn.to/3cVNrEV
2-pin Light Strip Connectors amzn.to/3vryzF2
Neon LED Strip Light amzn.to/3oKzI6K
2-Pin 8mm LED Strip to Wire Connector amzn.to/3oIce1U
20 Gauge 2 Conductors Red Black Wire amzn.to/3JhzJIR
22AWG Wire Cord for Single Color LED Strips amzn.to/3PPZWkd
10Ft Outdoor String Lights with 11 Clear Edison Bulbs amzn.to/3BsNpPi
Wire Stripper 10-22 AWG Wire Splicer Cable amzn.to/3St3vyD
Utility Knife Box Cutters amzn.to/3zMuttx
Gorilla Super Glue Gel amzn.to/3zptqye
Solderless LED Tape Light Connector amzn.to/3zhuJzg
RYOBI One Jigsaw amzn.to/3cX9tr5
Ryobi Airstrike Brad Nailer Kit amzn.to/3Q5kF3L
Ryobi 16 in. Corded Scroll Saw amzn.to/3OOdf3g
Panasonic LUMIX GH5 4K Mirrorless Camera amzn.to/3cPUD5D
Kreg Pocket-Hole Jig 520PRO amzn.to/3zeMT4I
Pipe and Drape System amzn.to/3PUxWfd
Faux Pampas Grass amzn.to/3Qa1h53
Balloon Blower Pump amzn.to/3BAgJ6q
Decorative Vintage Wood Garden Wagon Wheel amzn.to/3PRbTG6
Sanding Sponge amzn.to/3SfbMps
Trigger Clamp Set amzn.to/3BEzgOS
RYOBI 18V Brushless Cordless Circular Saw amzn.to/3POjCVB
Ryobi Cordless 2-Tool Combo Kit amzn.to/3OIMRaY
90 Degree Corner Clamp amzn.to/3bltIy4
12 Pieces 20"x 20" Artificial Boxwood grass amzn.to/3zGFueT
Steel Spring Clamp amzn.to/3oFT9h7
Mattress Bag for balloon garland amzn.to/3NyT8ad

Пікірлер: 80

@Nas_Tee Жыл бұрын

You deserve so many more subscribers 🙌🏾 you’re only the one sharing these DIY events props. Thank you for the great content and for helping us save 💰 on these expensive props 🙏🏾

@MakerDecor Жыл бұрын

Thank you so much for your kind words. I am so blessed to have the people who watch what I do already. I never thought I would have a KZfaq channel. But I am very excited to see this channel grow! Thank you very much for taking the time to watch my videos and comment.

@atdjmackee Жыл бұрын

Gotta admit I'm one of those intimidated by lumber yards. This came out awesome and I'm gonna need to get over it so I can add this to my inventory. Looking forward to the plans.

@MakerDecor Жыл бұрын

Yeah I was too, but now I prefer it just because of the pricing for sure. Thank you for the support! And good luck!!

@dolcerentals7167 Жыл бұрын

Crazy thing is i been looking for bending plywood and i called my local lumberyard here in Orlando and they have it, also the wife wants me to build one like this, thanks for the video

@MakerDecor Жыл бұрын

Thats awesome you were able to find it. I wasn't sure if to build it this way, because I worried people wouldn't be able to purchase bendable plywood. It really is the best way to build this! Good luck!

@DS-hq9ob Жыл бұрын

Honestly, your channel is A+

@MakerDecor Жыл бұрын

Thank you, appreciate that as it is a lot of work for me to put together a video

@lisagooden1628 Жыл бұрын

Thank you so much for the effort in making plans simple for the new wood crafters

@MakerDecor Жыл бұрын

Your welcome and thank you for the support!!

@pajamamamadiy8868 9 ай бұрын

Wow!! You are a woodworking master!!❤❤❤

@Failureisnotanoptionever Жыл бұрын

I love this design. Just excellent!

@MakerDecor Жыл бұрын

Thank you very much, it was a challenge to get it just right

@alexandrafurcea2910 9 ай бұрын

i've been waiting for so long for a tutorial for 3d arch! now i can ask my man to do it! thank you. you're work and creativity is amazing!

@giftedhands9492 Жыл бұрын

Thank you for sharing! I absolutely love it even the mistakes in the process 🙌🏾 awesome work!

@MakerDecor 11 ай бұрын

Thank you, definitely wanted to show the process of how most of my builds go lol.

@kberry2735 5 ай бұрын

I would like to say thank you 😊

@MakerDecor 5 ай бұрын

Your welcome and thank you for the support!

@WinterGirl1969 Жыл бұрын

I really enjoy your channel, very informative and bubbly personality. Keep them coming Thank you for this content ❤

@MakerDecor Жыл бұрын

Thank you, I appreciate you watching our videos and glad they have helped you!!

@iybarra5 Жыл бұрын

Wow! You are very talented.

@MakerDecor Жыл бұрын

Thank you for watching and commenting!

@davelaidlow2191 Жыл бұрын

You're Awesome bro, keep up the Good work. Blessings from Toronto Canada 🙏 🇨🇦

@MakerDecor Жыл бұрын

Hey, thank you so much for taking the time to watch our videos!

@salinas2290 Жыл бұрын

Can't wait to try

@MakerDecor Жыл бұрын

Awesome, thank you for the support and good luck!!

@ginas6312 5 ай бұрын

Thanks for sharing your valuable knowledge!!!

@MakerDecor 5 ай бұрын

Your welcome, Thank you for taking the time to comment!

@cindypagan3402 Жыл бұрын

I love you’re work

@MakerDecor 11 ай бұрын

Thank you so much!

@richnballoonz6261 Жыл бұрын

Once again another great build ✨would luv to try this one 😅

@MakerDecor Жыл бұрын

Thank you, It wasn't that hard once I figured out which one worked the easiest. lol

@nyrnyyr5722 5 ай бұрын

You’re a legend Ben !

@MakerDecor 5 ай бұрын

Appreciate the support!!

@OLYMPIALIZA Жыл бұрын

Amazinggg Lots of admiration from Africa

@MakerDecor Жыл бұрын

Wow, thank you very much for taking the time to watch our videos and comment!! Appreciate it

@yasamasifuen8354 Ай бұрын

Wow that was amazing!!

@MakerDecor Ай бұрын

Thank you glad to help!

@luluvn1875 Жыл бұрын

Your awesome thank you for sharing

@MakerDecor Жыл бұрын

Your very welcome and thank you for taking the time to watch our videos and comment!!

@blessingsjumpingcastles7781 Жыл бұрын

Absolutely Amazing

@MakerDecor Жыл бұрын

Thank you!

@blessingsjumpingcastles7781 Жыл бұрын

@@MakerDecor how do I get those in Namibia

@MakerDecor Жыл бұрын

@@blessingsjumpingcastles7781 Hi, I am not sure. But in the U.S it is called bendable plywood 3/8 thick. Carpenters use them for cabinets, doorways and other things that require a rounded design. Hope this helps and good luck

@ZozSing 4 ай бұрын

Looks amazing!! How did you hang the flowers on the side?

@pauley_bee 11 ай бұрын

I love the final look, so beautiful! Just subscribed to your channel. Where do you get your flowers from?

@MakerDecor 11 ай бұрын

Thank you very much! We got the flowers from a discount flower shop. I hope to make a video on it soon!

@alizaki3607 5 ай бұрын

So beautiful! What’s the measure?

@MrJortiz215 9 ай бұрын

Quick question. Do you cover the back or do you leave the back open?

@AlexNavarro-dy7kr Ай бұрын

Hello, very good job, I always watch your videos and learn. I would just like to know how the plywood you use is made so that it bends easily. first of all, Thanks

@MakerDecor Ай бұрын

Hi, thank you. This plywood is specially made to bend easily. But you have to purchase from a lumber store. It is usually where the wood workers buy their wood as it is a special type called bendable plywood. Good luck

@kleenchick3102 11 ай бұрын

How many inches did you cut the stripes into?

@KolorPopDesignz 7 ай бұрын

Awesome video. My city does not carry bendable plywood. Any alternatives?

@MakerDecor 7 ай бұрын

Hi, I am sorry I do not have any easy recommendations for other options. There are, but it takes many more steps and can be complicated to make it look clean and all together as one piece. So for now, bendable plywood is a must for this design. Sorry

@dhivyasrinivasan4132 9 ай бұрын

Hi, do you have any barn making plan? Can i buy your barn backdrop plan?

@rosaizucar5428 5 ай бұрын

Great Video! May I ask how long it took you to build the final one?

@MakerDecor 5 ай бұрын

Hi, I think less than two day project. The first day was making it and sanding. The next day was clean up and paint I believe. They weren't full days. If you have a brad nail gun and the rip cut jig for the saw. It comes together pretty quick, plus I was filming the whole time. lol

@marcelimarilag 2 ай бұрын

how many people does this need to lift for transport? and will it fit on the back of a regular flat bed truck?

@MakerDecor 2 ай бұрын

Hi, the plans for this one is 7ft tall. I have a 8ft bed truck. It fits easily as it is 4ft wide in the plans. I moved it myself, but two people always make the job 10 x easier. I just leaned the back against the tailgate and tipped it over slowly. Then just lifted the legs back and pushed it in on the back. To unload it I did the same, Just slid it out and tiped it upright. Then I just put one arm in the center of the bottom arch and pushed up. I was able to move it around this way. But if you have two people it is so much easier just carrying a side each. The only trouble I had moving it myself was going through a door way, lol. It was a little tricky but I did it lol. Good luck on your build!

@julissahernandez1750 Жыл бұрын

Hello! I love your channel. Would you ever consider making the entrance to Jurassic park build?

@MakerDecor 11 ай бұрын

We will see. I am so behind on projects but my daughter is have a Jurassic park party in like two weeks. So I might look it up and see whatsup, lol.

@user-vl8bl4mz3q 8 ай бұрын

Bonjour j'ai acheté votre plan mais par contre je sais pas le bois c'est combien de millimètres s'il vous plaît

@chrisdrivescali 6 ай бұрын

🎉

@ChingonaElevations Жыл бұрын

If i need it to make it wider and only 3 "layers" how do i change the plans i would by from you? Or do u sell custom plans too?

@MakerDecor 11 ай бұрын

Hi, sorry I do not sell custom plans. But changing the layers to only 3 is an easy change you can make while building. Good luck!

@MaximusTheChosenOne Жыл бұрын

I wasn't even aware they sold bendable plywood. It is actually pretty easy to make your own with a mitre saw, but buying it is def a game changer for me, that will save at least a couple hours on a build!

@MakerDecor Жыл бұрын

Yeah, I tried to stay away from it because I wasn't sure the availability for others at lumber yards. But if you have access to it, yes it is a time saver and works great. It does need to be sanded pretty good to get a clean finish, but made this project go by so much easier. Thanks for watching!

@kylieb4836 2 ай бұрын

I’m with you Maximus - I’ve always used the table saw to make repeated cuts - I’ve just priced this online and the price is affordable compared to time spent and allowing for wastage (I’ve made a few errors with this method…lol). Many thanks @MakerDecor

@lisagooden1628 Жыл бұрын

How much did the final product weigh?

@MakerDecor Жыл бұрын

hmmm, not sure but I was able to move it around myself lifting the top up and walking around with it. But it wasn't light, I recommend two people to move it and not damage it. Plus if you see at the end of the video, there are wood pieces in the back. They will be a good lifting point to help with transport. Hope this helps and good luck!

@alizaki3607 5 ай бұрын

Hi Which Wood do you used?

@MakerDecor 5 ай бұрын

bendable plywood

@Patron77770 11 ай бұрын

How thick is the bendable plywood ?

@MakerDecor 11 ай бұрын

3/8 thick

@KolorPopDesignz 7 ай бұрын

Also, the 1st one looked fine. What was wrong with it?

@MakerDecor 7 ай бұрын

Yes, but I could see some issues that people would have with the design. As I try to make my plans geared toward beginners. I can see this not working out and then people not happy with the result. So I decided to do the easier way with bendable plywood.

@sarahclemmons2171 Жыл бұрын

I have no idea how y’all are only at 30K I seriously thought y’all were at least a million + subscribers! Excited to watch this channel really get the attention it deserves and grow more and more! (Also, this build was 🤌 just like all the other videos I’ve seen from this channel!)

@MakerDecor Жыл бұрын

Awww thank you so much. I do not know what I would do if I had that many subscribers, lol. I appreciate your comment and definitely try to put the best content out I can. I am really excited as well to see where we go! Thank you very much!!

@sarahclemmons2171 Жыл бұрын

@@MakerDecor I bet if you started making shorts of your videos, editing together some of the highlights etc and then linking them to the full video you would start to see even more of an increase! It’s all about the short videos these days 🤣

@MakerDecor Жыл бұрын

@@sarahclemmons2171 I know your right, for sure short content is where its at right now. I have started to make some of those on my Instagram. But I need to get on that more and be more intentional with my content. I appreciate the feedback and will look into it more for sure!!