DIY 8-10 Gallon Off Road Shower for Under $200! - Stay clean out on the trails and campsites.

Рет қаралды 313,642

2 жыл бұрын

DIY your own shower for off-road and camping adventures. It doesn't take much and you could save a couple hundred dollars making this instead of buying. But there's nothing wrong with buying at all ;)
========PARTS LIST=======
Bulkhead Fitting, 1/4" NPT Female to 1/2" NPT Male
$10
www.amazon.com/gp/product/B08...
Bulkhead Fitting Drain/Flush Port Kit, 3/4” male GHT
$11
www.amazon.com/gp/product/B07...
Outer Mount Metal Valve Stem, 1”
$9
www.amazon.com/gp/product/B01...
Stainless Steel Rain Barrel Spigot
$17
www.amazon.com/gp/product/B07...
2 Hole U-Tube Strap Clamp, 100mm
$21
www.amazon.com/gp/product/B08...
ABS Pipe, 10’
$37
www.homedepot.com/p/Plastic-S...
4 in. ABS 90-Degree Hub Elbow
$13 (x4)
www.homedepot.com/p/NIBCO-4-i...
4 in. ABS Cap
$13 (x2)
www.homedepot.com/p/Charlotte...
4 oz. Medium Black ABS Cement
$5
www.homedepot.com/p/Oatey-4-o...
=======EXTRAS=======
Pressure Relief Valve, 1/4” Male NPT
(Potentially Overkill and might not really be needed)
$11
www.amazon.com/gp/product/B00...
Back Mount Pressure Gauge, 1/4” NPT
$12
www.amazon.com/gp/product/B09...
Portable Air Compressor
$37
www.amazon.com/gp/product/B08...
Instagram: @spaseyota
spaseyota?...
------------------------------
Track: It Doesn't Matter Anyway - SOMM [Audio Library Release]
Music provided by Audio Library Plus
Watch: • It Doesn't Matter Anyw...
Free Download / Stream: alplus.io/i-d-matter-anyway
------------------------------
#offroad #DIY #shower #camp #gear #make #water #storage #roof #rack #mount #build #overland #explore

Пікірлер: 272

@LordMekanicus Жыл бұрын

May I suggest rebuilding thus rig in sc40 pvc? Cellular core ABS turns brittle under UV, also the joints like to pop loose with vibration. Not to mention that ABS is toxic, and even though this is a shower and not drinking water, you may want to think about it.

@TrevorDyck 10 ай бұрын

This comment should be pinned.

@MrSatchelpack 4 ай бұрын

He should also use real schedule 40 pvc that's rated for pressure and not the non rated stuff in a big box store.

@jesusblessthesecommentsamen 3 ай бұрын

I don’t think he cares after having a warm shower

@dr.froghopper6711 10 күн бұрын

I understand showers, I really do. But if you’re going cross country in the desert, it’s only prudent to make every water reservoir safe for potable water. You can still shower with it but using pressure rated schedule 40 pvc pipe will keep the water drinkable.

@swerveproductions6062 6 ай бұрын

It may be a little more expensive but I suggest solid core pvc pipe with pressure fittings and 711 pvc glue. ABS cans may say rated for 180psi but left unpainted and in the sun it becomes very brittle. Exposed ABS longevity is very short. Also recommend brass female adapters due to cracking threads on the plastic female ends. Just ideas

@dsteck5888 2 жыл бұрын

Very clean and efficient use of space

@deeppatel2469 Жыл бұрын

Love the idea with the U bend. One issue that I ran into was, when the water begins to run out, outlet would spurt. I had to add a wedge towards the front of the tank so the water wouldn't level out below the outlet.

@mattsjoelfernandes9132 7 ай бұрын

This is exactly why KZfaq wins. Content like this is amazing. Thank you. 🎉

@JAWBoneProductions1 Жыл бұрын

This is the coolest DIY shower I've seen. I'm thinking about doing something like this for the top of my ambulance

@wellnessotr 11 ай бұрын

I love the bigger shower 🚿and the valves. I want to do it on another one to build for my shower. I used a threaded bar with fuel line tubing over it to secure it to my rack bars with nylocks.

@louiechidwick6034 Жыл бұрын

Hi mate, greetings from the UK. This is a brilliant idea, I'm well impressed and will be making one of these for my mini bus conversion. On a side note, can you consider making a video with a basic 'mock-up' of one of these to see how much pressure it will take before it splits or blows one of the end caps off, it would be interesting to see where the weak point is and lets face it, everybody loves a KZfaq video where something gets blown up!! All the best mate.

@motobroski9881 Жыл бұрын

was looking to add a shower to a 2 & 1/4 door f150 but was not satisfied with the straight line since the cab is so small this is a really good idea I was a plumber for 4 years I'm pretty sure there is a solid u joint that would bring the 2 longest pieces closer together allowing for more roof rack space definitely will be using your idea tho genius

@extraincomesuz 11 ай бұрын

Thank you! I live in Malaysia but don't have a hot water heater plumbed to my shower. Most days it's ok but during monsoon season the stainless steel holding tank makes chilly showers. However, it's sunny most mornings, even during monsoon season, so I think this pipe set up facing the morning sun would make a nice warm shower around noon time. Yaay!.

@ianmburke 2 жыл бұрын

A feature to consider but I don't know if necessary, would be some form of baffles in the tube. If the tank was half full it would be about 30lbs able to slosh from front to back and side to side (imagine the body roll if off camber) and it is so high over the center of gravity... just my thoughts- otherwise amazing work and super awesome idea 💡

@wormfighter1 2 жыл бұрын

Ya at 1/2 full it will create a water hammer that could easily blow out the ends of the pvc. Imagine a 30 pound ball slamming forward under a hard breaking situation.

@wyattb995 Жыл бұрын

Good point, wonder how much flow and slosh reduction there is with just adding a few extra bends and turns in the run. Or if slapping a butterfly valve in the center of each long run would do the job well enough.

@robpivato4227 Жыл бұрын

The shape of the lay out could be the answer in a different project... If its an oval or a ring... than the water never crashes at the ends!!! PS video guy.. Thank you so much; excellent work! I'm gonna aim for 55 psi unless someone has reason not to. THANK YOU!!!

@RoguePrimate1 Жыл бұрын

Simple, add some sponges.

@geographyinaction7814 Жыл бұрын

Would placing the 'U' at the front relieve the pressure? I am thinking that might work.

@BMBautista Жыл бұрын

Great use of space! Well Done!!

@gtr9005 10 ай бұрын

Nice thinking. Great idea to build a affordable shower. 👏👏👏

@GX470PracticalMaintenance 2 жыл бұрын

Thank you for the video and especially the parts list. Very Helpful.

@ianmburke 2 жыл бұрын

A good stepper drill bit would be a great tool to add to your diy collection too! Great work 💪

@spaseyota 2 жыл бұрын

Ohhh duh haha I actually have some and could have totally used them on this

@toddsevenz-coleman9891 11 ай бұрын

Nice design. Consider connecting both sides of the shafts with T joints. 4 would add a little weight but could add a couple gallons of capacity, increase rigidity and decrease water movement when 1/2 full. Thanks for sharing!

@sannyassi73 9 ай бұрын

Very nice. One thing I'd do different is attaching it in such a way that I could adjust the how level the system is when parked on an incline with maybe up to 10 degrees of adjustability- more parking options if you need a shower. I plan on using a system very similar to this when I get to my box truck build.

@chrisnoyes9397 10 ай бұрын

I did this for a truck and ran into the online suggestion panel saying that ABS pipe can leach BPA's into your water if exposed to direct sunlight. It's not meant for direct sunlight exposure. It was recommended to paint CPVC or PVC.

@NECTaco Жыл бұрын

Very clean.. I can dig it

@timothythegreat6294 10 ай бұрын

absolute masterpiece ! 🎉🎉🎉love it . best looking one out there marines/soilders could learn something here

@jacVincent1 2 жыл бұрын

Nice job, certainly one of the better on KZfaq. Worth mentioning that 4” pipe gives you 200mL (0.05 US gal) per inch of pipe. I estimate you to have 8ft of pipe on your roof so your looking at 20 litres(5 gal). Not really enough for a real shower. I managed to squeeze 20ft of 4” pipe on my roof and it is only really enough to have 2 or 3 quick showers and maybe to rinse the dishes for a few days.

@coltinkerstin5774 Жыл бұрын

Me and my GF can both shower and wash long hair off 4.5gal in my shower I made. Just don’t run the water unless you need to be.

@Twizter68 10 ай бұрын

Nice setup. I would add some rubber pads where it toucheds the rack to prevent shock and wear damage.

@BrentYoshida 2 жыл бұрын

Brilliant work man!

@_moes_garage_ 10 ай бұрын

dang that is so cool! thanks for uploading this!

@pwyoungiii Ай бұрын

This was amazing man!!!

@KyHarvey71 10 ай бұрын

great build, I like the idea of shooting the pipes down the middle. Mine goes around the outside. You may want to consider a way to vent the pipe as you fill it or you wont be able to fill it all the way. On my build, I use my spare tire to pressurize the shower. Only needs a quick burst to get pressurized water without messing with a compressor.

@mikebartoli4755 8 ай бұрын

Is your build online? I would like to see that set-up.

@l.d.8310 7 ай бұрын

That's wicked!...looks kewl too

@geographyinaction7814 Жыл бұрын

Love this project, great job. Buy yourself a Step-Bit, they are amazing for drilling holes of various sizes!

@geographyinaction7814 Жыл бұрын

I am sorry, I noticed someone else mentioned the bit and you say you have some.

@randall3785 10 ай бұрын

I’d like to see the how you secured the cases to the roof rig. That whole setup looks pretty neat. Good job

@capsisking 2 ай бұрын

I came for this too

@romans883 2 жыл бұрын

NICE SET UP ! I think pressure release valve is overkill excellent project !

@spaseyota 2 жыл бұрын

I agree. I only figured that out after using it. Thank you!

@sonofthunder. Жыл бұрын

made a long straight one,on my duramax crew cab long bed on the lumber rack,shrader front n back and hose bib,i think i have a articulated shower arm w water saving head,that actually sprays really well without using it up so fast,for my bee apiary mostly remote, to rinse off when im sweaty hot,i did use a threaded end cap with dope, and Teflon tape, may add a pet cock valve to bleed air as i fill up,love it

@ofermorag 2 жыл бұрын

Nicely done!

@WhiteDoberman 8 ай бұрын

It's awesome. Great post. Next time you should be cementing both sides/ends not just one. Hope that helps!

@bluezhawg2104 10 ай бұрын

I built a similar one and used a 45 degree on the fill end so I get max capacity.

@aacc2622 2 жыл бұрын

This is Brilliant!

@berniezander 11 ай бұрын

Nice build!

@cliffmorgan31 10 ай бұрын

All very nice and well thought out and built… I would want a top opening where a funnel and bucket of water could fill it. I would thing the U end might be a good place to put the top access accessory. Thinking able to ad water conveniently in a remote area with a stream or lake source. Nice job and good video.

@cliffmorgan31 10 ай бұрын

Also could be used for pressure relief when filling with a hose…

@TheCyberRebel 5 ай бұрын

Brilliant, thanks for shearing

@kameshwb4270 8 ай бұрын

Super, To make sure you are filling fully to the top. Instead of end caps you may use "Elbow" facing up and closing the ends with your hardware.

@Randoverse Жыл бұрын

When using that glue make sure to use a wire brush where your gluing and apply on both sides not just the pipe to make sure your getting a proper seal. Good setup though. :)

@luischav3z 2 жыл бұрын

that is a nice setup

@livingworkingoutsidebox 7 ай бұрын

I keep re-watching this because its a great option on a small scale as well as on a larger scale for an outdoor shower on a larger camper for family use. 👍💪🌊

@abovewongart Жыл бұрын

Thats so sick!!!!

@VCV_Travel 10 ай бұрын

Great idea!

@mejiaparralife Жыл бұрын

Great Job!! Thanks for share!

@mplconsulting Жыл бұрын

Really cute Dog! I love him!

@spaseyota Жыл бұрын

Haha thanks! He’s our youngest and our most obnoxious but we love him too ❤️

@mplconsulting Жыл бұрын

@@spaseyota You’re welcome. Which kind of dog breed does the cutie have and how old is the dog now? Thanks in advance!

@purebloodedpatriot9352 2 жыл бұрын

Very clean. Great job.

@USARAY1947 11 ай бұрын

Have you considered putting some rubber cushioning under the pipe where it contacts the crossbars to to prevent pipe damage from vibration and bumps?

@kcribari 2 ай бұрын

Great video man thank you. Can I ask what you're using to pressurize the unit?

@felipe4181 7 ай бұрын

How smart guy! Well done! I was wondering what could be the behaviour of the system when it is over 40 degrees Celcious?

@Nirvana_lx 2 жыл бұрын

nice design and great job! BTW, what is the gear on the rear of the roof? (between the two lamps?)

@ChrisLaw84 18 күн бұрын

I subscribed before i watched the video, thumb nail hit the spot lol

@Mondo888 10 ай бұрын

Thanks great video

@TJHardy1441 2 жыл бұрын

Hey man great job. If you see this would you mind saying what the rough dimensions of this is? Trying to fit one up for a Tacoma.

@youmebornfree Ай бұрын

Now the thing I see that I would do different than what everyone is doing is I would make a smaller diameter tube and make it square and depending on the size of your rv/truck/etc you can add rows for what ever volume you need. This distributes the weight evenly and it also is more surface area for the water to heat up. You could also make it hinged so it could be angled toward the sun. I have seen a similar design from a friend and it would get super hot like too hot but that was in Texas. If I knew I would be dealing with that I might make a cold water mix. You could also just make a separate pvc pipe pump that has a valve for filling but also a valve that connects to the water so you could pressurize it first then release it. Then you could judge the size you need for the length of shower you want. I also have a 12v outlet in the back of my Element and I have a airpump for my tires that I could set to 30 psi and just push a button when its starts to fade.

@felipelozano7810 2 жыл бұрын

Hey, congrats on your built, not only the shower but the car setup in general, can you please share the brand of your light bars and brackets? They look amazing. Thanks

@spaseyota 2 жыл бұрын

They’re just cheapo 9” bars off amazon.

@GAdirtroad 2 жыл бұрын

Can you please provide information on your roof rack system? It is very clean and looks great! I love the storage boxes.

@colbybeam 2 жыл бұрын

Looking and pausing the video, it looks like the boxes are plano

@TheLawrence1999 10 ай бұрын

I really love this idea, I was wanting to build something similar on my rig but Im glad I didnt til now cause I wouldnt of had this much thought into it like the pressure gauge and pump valves I wouldve relied on gravity which probly wouldve never worked. How long does the shower last on full fill up, just curious. Im also looking at having it for water storage to use for cooking as well or would you not recommend the plastic being potable?

@othoapproto9603 11 ай бұрын

Wonderful idea, design, fabrication, and video. I'm going to guess 20 gal @ 8.34lb per gal = 166lb + the unit @ 10lb +/- 176lb, wow that's a lot on the roof.

@joerockme7485 Жыл бұрын

Great job very cool, I have the same roof rack. I will make one thank ……But will it last? 👍😎

@georgenicoloiu2052 11 ай бұрын

Very useful video. Could you please tell me what are those boxex on the roof? I guess are for extra storage, but where did you get it from? Thanks.

@MrHotJohnson Жыл бұрын

Very nice setup, but why will the shower be in the front instead of the back

@p_a_rivers_projects Жыл бұрын

I follow your instagram. This is a sweet mod! I was wondering why people only do a straight pipes. I feel like a longer one with bends would hold much more water

@markhomesteader3813 Жыл бұрын

Great build! What's the name of those cargo boxes and roof rack?? Gotta get one!!! Thanks!!

@elgoogsucks9005 Жыл бұрын

Thanks for sharing

@jardoo 2 жыл бұрын

what are the lengths of the PVC pipes and measurements you cut them to? i want to build the exact same one. thanks.

@philipgauthier3570 11 ай бұрын

Nicely done. Question, what antenna is that on the back. Cell phone booster or something else. Can you forward me a link? Thanks for the video!

@erichummel489 2 жыл бұрын

You built a P trap. You cannot fully drain the tank if it’s not perfectly level. You need to use “T”’s at the front so both legs are joined at both ends. Then parking slightly nose down will let it fully drain.

@spaseyota 2 жыл бұрын

V2 coming up! Haha solid feedback

@JB007Rules2 2 жыл бұрын

I saw the same.... YOu put the water valve literally at the top portion of the end cap.... Won't work, needs to be as low as possible or like Eric said above, a P-trap or even 9 degree elbow at the end with a cap on the end and the valve on the bottom side so the water goes down into it.

@gLocksmith. 10 ай бұрын

I was thinking you could add a low point where the water will sit even at the lowest level, the. plumb a tube from your spigot into that low point, and when the pressure increases the only way for it to escape is to push every last drop of water before it will begin to spurt. Another improvement already mentioned are interior baffles to combat sloshing

@jdubbery 2 жыл бұрын

Liked and subscribed. Great video and build. How's it been holding up? Would you make any changes?

@moreclips805 Жыл бұрын

Mine cracked in under a year from going off road. Really hated to, but upgraded to an aluminum Roadshower by yakima

@outdoortrials 7 ай бұрын

Plumber here. I like the idea however some for thought in the future. ABS plastics are mainly designed for sewage waste disposal. PVC would be a far saver plastic to use. The glue used for PVC plastic piping is not going to contaminate your water if you use any of it for drinking (or cooking). Also You can paint the PVC if you would rather it be black. ABS plastic after being exposed to heat (such as sunlight) can leak chemicals from the plastics into the water. This is the reason behind using it for waste rather than for potable water. Also some areas are doing away with ABS due to it failing in long term use more so than PVC. With this said. I really like your build and the execution of making it. Looks really good.

@cmatties1 5 ай бұрын

Hello! I am building one of these for my tacoma and was wondering if you could help point me in the right direction as I would like to build this as correctly as possible. I am using a 6" by 5' schedule 40 PVS pipe with no turns. It will just have 2 end caps. I was going to use a different pvc cement that he used and use a primer. Any recommendations would be helpful. I was planning on using the same hose barrel, valve stem and bulkheads but use WaterWeld (JB Weld) on the inside of each fitting that needs a hole drilled instead of just using the pvc cement to seal it. I also am leaning towards not using any of the rubber washers since it may create uneven surfaces if tightened too tight (still thinking on this). I think the JB weld will be strong enough to hold the pressure regardless but I figure more flat and even the surface the better. Any other changes you could provide would be very helpful. If you don't think some of my changes are good, please let me know. Any other plumbers or anyone who knows what they are doing are more than welcome to help out as well

@cmatties1 5 ай бұрын

I'm also worried about when the tank is half full and water rushing to the front when I brake. Not sure how to put something inside to slow that water.

@outdoortrials 5 ай бұрын

@@cmatties1 honestly the rubber gaskets as long you clean the burs off should be good. As for the sloshing. What are you mounting it in or on? You will habe around 50 pounds of water (rough estimate)

@outdoortrials 5 ай бұрын

@@cmatties1 schedule 40 PVC should be good. I would make sure you add something like 3 mil tape to protect the pipe from what ever you use to mount it

@cmatties1 5 ай бұрын

@@outdoortrials I am going to mount it on my bed rack right next to my roof top tent. There is room for it there. I am thinking of using a conduit carrier kit mount. I can just bolt that to my bed rack. I did see a video where someone added a couple floor drain covers on the inside to stop the water in 2 places. Do you know if a 6" SDR 35 drain gate will fit the inside of a 6" Schedule 40? Are you referring to 3m adhesive tape? or are you thinking of something different?

@KFAKTA 9 ай бұрын

Hey, love the water tank Idea, also love the storage boxes you got on there care to share a link to where you got them?

@spaseyota 9 ай бұрын

amzn.to/46rND5o

@mbperfection Жыл бұрын

great job ! how many gallons does your set up hold?

@arbralouve 11 ай бұрын

You use 2 + schader valves but they look different to me. What's the difference between them... One look more like a tyre valve, how did you seal it from the inside? Thanks for the nice vid!!

@jeredlinden8360 Жыл бұрын

Great build! How many gallons does is hold?

@user-bp6ov4vd2f 6 ай бұрын

Hello. Thank you for sharing the DIY technique. What brand of rooftop storage case do you have?

@spaseyota 6 ай бұрын

www.amazon.com/dp/B07B7ZB484/ref=cm_sw_r_as_gl_api_gl_i_JAK30V6HQ1YYMRP6RJJ7?linkCode=ml2&tag=spaseyota-20

@arisistible1 Ай бұрын

That’s awesome, the thought and engineering that went into this. You do know they make battery operated shower hoes that pumps water out of any water jug right? It’s less than $50.

@lesnik4625 Жыл бұрын

A good idea. Containers on the trunk of which company?

@dnewman20 Жыл бұрын

Great work! Did you mention in the video how many gallons of water does your contraption hold?

@spaseyota Жыл бұрын

Roughly 7 gallons

@new2guitar1 9 ай бұрын

Nice work. Very helpful. Can you tell me, what rooftop storage boxes are those on your vehicle ? Thanks

@spaseyota 9 ай бұрын

amzn.to/48DqLC4

@chrispaulick Жыл бұрын

I would have made some treaded fittings so you could clean it out from time to time. No one ever thinks about that.

@javarenas 11 ай бұрын

amazing! idk if i missed it but what's the capacity? Like 5 or 6 gallons? More? Looks pretty big tbh! lol I wouldn't be surprised if you said 10.

@osamaabdelgader8348 Ай бұрын

May I know the name of those U clams that go on the rack please. Very nice setup !!!

@Nipon069 5 ай бұрын

Hi , great job , building myself the similar shower system , what is the brand of your casing ? Thanks !!

@Jason-jo3tu 10 ай бұрын

What light bar are you running. Im definitely a fan

@nativeknowledge3381 Жыл бұрын

Hey Caleb, How's your solar shower holding up? I'm building one very simlar to yours. Could you tell me where I can purchase or order the exact connectors you used to connect your adjustable pressure valve to your ABS ? I bought the same one from amazon and the connecting nuts and gasket(s) didn't come with it. Thanks for your great video, hope to hear from you soon. 🤪

@nickremington9873 Жыл бұрын

Home depot

@AJKam1kaz3 Жыл бұрын

Unless I missed it in the comment section, how long (minutes) is continuous use of the shower until you run out of water?

@Mauromoustakos 5 ай бұрын

But how do you raise the water up the roof of the car when you are out camping? Manually? Its a possible way, but is there something I'm missing? Many thanks for the video.

@JawnJohn Жыл бұрын

how’s this holding up? any changes you would make? I’m planning on making this for my 4Runner with a Prinsu rack as well

@halcollins4293 10 ай бұрын

How much water is left in the system when you “run out”? How do you dry the system to prevent crud growing inside the pipes?

@erikthompson1459 Жыл бұрын

That cement is enough to hold pressure. No epoxy or loctite on the fittings??

@jinalswetalvinay 11 ай бұрын

I have made similar construction using 4 inch pipe but with my design the issue is that only pressurised air comes out but not the water ..

@williamcorbin4275 10 ай бұрын

I realy like you hot water shower set up nice... By the way what kind of dog is that the all black one?

@photog1529 11 ай бұрын

If you attach a garden hose to fill, how are you venting out the air when filling?

@SpanishFly801 2 жыл бұрын

You have any weather issues with those Plano cases? Water leaking in?

@superbmediacontentcreator 10 ай бұрын

Just be aware that water is 8.34 lbs per gallon so this is like 90 lbs very, very high on your vehicle. I would also look into a pressure blowoff valve if the water is left and overheats.

@deonharris5977 4 ай бұрын

Exactly what i had planned, was going to use white pipe and paint it black, But using the black pipe is a no brainer. its just that i have not seen any here in South Africa, What is the black pipe called and what is it used for Thanks