Video tutorial on how to remove the stock Alpine cassette player from a BMW E23 body style. This particular video was done on a 1984 BMW 733i, but it also applies to other models such as the E21, E24, and E28.
Website: 4diyers.com
Facebook: / 4diyers
Google Plus: plus.google.co...
Twitter: / 4diyers
Instagram: / 4diyers
Tumblr: / 4diyers
Pintrest: / 4diyers
Tools/Supplies Needed:
-standard/flat screwdriver
Procedure:
-first start by removing the small plastic trim that boarders the face of the stereo
-it is held on with four clips in total
-there are two clips on the bottom and two clips on the top
-this trim needs to be spread, be very gentle so it doesn't break
-on each side of the stereo there is anti theft latches which need to be pushed down while pulling the stereo straight out
-if the stereo is stuck, DO NOT pull on the face because it will come apart
-use a standard screw driver along the sides to assist it out carefully not bending the metal frame
-once it's out, you now need to disconnect the wiring on the back side
Thank you to all those who watch my videos and support my content. Don't forget to subscribe to my channel for future tutorial videos and like my video if you found it helpful. New videos are always being uploaded every week!
© 4DIYers 2013
All Rights Reserved
No part of this video or any of its contents may be reproduced, copied, modified or adapted, without the prior written consent of the author.