DIY BOSCH DRYER belt replacement (CLASSIXX7 MODEL)

Рет қаралды 11,426

2 жыл бұрын

DIY BOSCH DRYER belt replacement
CLASSIXX7 MODEL
You can save 750 USD If you can still fix your dryer by simply replacing the defective parts.
In this video I have successfully fixed my dryer by buying the replacement belt below:
www.ebay.co.uk/itm/363088018347
Please be reminded that this task is not easy, even with electronics background I still had some difficulties due to excessive bending reaching those locks, screws and tools(maturing is catching up -lolz)
I recommend you to have someone to assist you on this task, ensuring all the safety procedures at all times. But it was worth repairing instead of buying a brand new one. With this fixture I estimated to use the dryer for another 1 to 3 years more.
#batoti

Пікірлер: 22

@WittyDutch 2 жыл бұрын

Thanks. Left thread on the blower fan. Glad I saw that. I just unscrewed the back side, loosened the drain tubes and was able to lift the tumbler that way.

@Batoti_world 2 жыл бұрын

Thanks for sharing your experience. This will make more easier next time we need to go over the same fixture. Cheers

@allaroundallaround4685 2 жыл бұрын

Well done!

@billyhickman7113 Жыл бұрын

I actually found when I’d unscrewed the face plates, I was about to sufficiently move the drum out of the way to slip the belt round

@billyhickman7113 Жыл бұрын

But my, that is not a job for the faint hearted. You basically have to take apart and rebuild the dryer

@Batoti_world Жыл бұрын

Excellent, I hope It is working properly now.

@jekkolokoy 2 жыл бұрын

grabe talaga ang sipag. busy mind

@Batoti_world 2 жыл бұрын

Hahaha. Mana lng sayo

@maryellis3661 Жыл бұрын

how did you know it needed replaced

@Batoti_world Жыл бұрын

Thanks for your comment. Most mechanical units nowadays are using belts as such like cars and other appliances. Most belts life span is between 3 to 5 years depending on how often you use the unit. I anticipated that the issue was the belt since the electronics and motor seems to be Ok. I had to open to verify, found out that the belt are totally worn out and I had to replace it.

@jigzadventure6333 2 жыл бұрын

Si ate talaga nagtry..hahaha pero success. Nadale ng magic..

@Batoti_world 2 жыл бұрын

Magic touch yan bro.

@jigzadventure6333 2 жыл бұрын

Ayun pla ang magic dun..hahaha

@Batoti_world 2 жыл бұрын

Haha. Tyagaan lng hehe

@mattb5667 Жыл бұрын

I need that white pulley wheel need to find what part number it is 🤔🤔

@philipmwale Жыл бұрын

I also need help on the belt,I have a Bosch dryer which has a damaged belt…how can I order the belt,am in Zambia

@Batoti_world Жыл бұрын

Check your model if this one is compatible. www.ebay.co.uk/itm/363088018347

@MrsUnique437 8 ай бұрын

The video was to fast

@markorfila3832 Жыл бұрын

The front should come off not the back !

@johl83 5 ай бұрын

So you can fix this by just removing the back panel? I have mine fully open right now and struggling to make space to slip this belt in. Please let me know if it's possible just by removing the back?

@Batoti_world 5 ай бұрын

@johl83 you can make space and slip the belt from the front drum.