Zanussi Tumble Dryer Belt Change - Easily Fit a Dryer Belt Yourself!

Рет қаралды 188,650

Күн бұрын

Zanussi Tumble Dryer Belt Change - Easily Fit a Dryer Belt Yourself!
Is your Zanussi tumble dryer’s drum not spinning? To fix it, watch on for our guide on how to fit a Zanussi tumble dryer belt!
If your Zanussi tumble dryer belt is broken or faulty, you will know because the drum won’t be spinning like it should. Fortunately, when this happens, you can actually change a Zanussi tumble dryer belt at home to fix the problem without replacing the whole appliance or calling a repair professional! In this video, we provide a full step-by-step guide on how to replace a Zanussi dryer belt to get your dryer spinning and working properly once more.
You can buy a new Zanussi tumble dryer belt here:
www.espares.co.uk/search/ma33...
For any other Zanussi tumble dryer spares or accessories you need, visit the eSpares website:
www.espares.co.uk/browse/at10...
To make sure you buy the right belt for your particular make and model of dryer, you will need to know your appliance’s model number. Learn how to find it here:
• How to Find The Model ...
Learn how to maintain and refurbish a condenser dryer with the link below.
• How to Refurbish a Tum...
While you’re here, don’t forget to subscribe to stay updated on all things eSpares, including future appliance repair guides, appliance maintenance advice and much more.
Want to skip straight to the information you need? Here's what we talk about in each part of our video:
0:00 Introducing the video
0:15 Why the belt may need replacing
0:22 Suggested video: How to Replace a Belt Tension Pulley on a Zanussi Tumble Dryer
0:28 How to remove the top and side panels
2:17 How to remove the plastic and metal heater cover
4:09 How to remove the heater
5:07 How to remove the fan cover and fan
6:26 How to release tension on the belt
6:49 How to remove the belt
7:09 How to remove the drum and back of the tumble dryer
8:38 How to fit the new belt to the drum
8:58 Reattaching the drum and back of the tumble dryer
9:32 Reconnecting the heater
10:09 Reattaching the heater covers
11:03 Reattaching the side panel
11:23 How to fit the new belt to the motor
12:18 Reattaching the fan and fan cover
13:43 Reattaching the side and top panel
14:25 Suggested video: How to Maintain and Refurbish a Condenser Dryer
Thanks for watching!

Пікірлер: 161

@brianfennell475 4 жыл бұрын

This video is excellent. My belt snapped today and an hour later it's fixed thanks to this. Clear,concise instructions. Why anyone would thumbs down this video is beyond me.

@eSpares 4 жыл бұрын

Hi Brian, thank you for your post and glad we could help as that is all that matters.

@garybraim9962 5 жыл бұрын

What a great presentation, well spoken, planned and delivered, exactly what I wanted, thank you very much.

@user-lu2vd2bk4w 5 жыл бұрын

Thanks, video was a great help, your machine is clean compared to my fluffed covered machine took 30mins just to clean the thing.

@richardrtb1 5 жыл бұрын

Brilliant video, never done anything like this before but got a belt for £5 and followed this video step by step and now have my 6 year old tumble dryer purring again. Thank you so much

@eSpares 5 жыл бұрын

Hi Richard, glad to hear your appliance is working again and you saved yourself some money. These are the comments we love to hear about.

@fionaomahoney623 15 күн бұрын

My dryer was slightly different so I went through the front to get the belt on which was a simpler job for me. Then I had to remove the two covers of the front and back fans, and remove the motor, leaving all the wires all connected, and then I could put it through the belt so that I could get it onto the pulley system. Delighted with myself, fixed my dryer for 16euro ! So this video definitely helped me understand what needed to be done, but just a few slight differences.

@eSpares 14 күн бұрын

Hi Fiona, this is amazing news! Thanks for sharing your own fixing experience with us. We are so glad our video helped you have the confidence to fix your tumble dryer yourself!

@tonyjackson4876 5 жыл бұрын

Brilliant video, fully explains the replacement procedure. We bought the replacement belt from ESpares, excellent service, very reliable, will definitely recommend your company.

@eSpares 5 жыл бұрын

Hi Tony, thanks for the kind compliments. We hope this video helped you.

@tonyjackson4876 5 жыл бұрын

@@eSpares excellent video, concise and extremely helpful. Keep up the good work!

@mikewinters291 4 жыл бұрын

Thanks Mat for a very comprehensive dismantle replacement belt and then rebuild tutorial. Saved me a lot of money!

@eSpares 4 жыл бұрын

Hi Mike, thanks for letting us know and it's made our day that you saved money as well.

@kjduf1 4 жыл бұрын

Massive thank you, clear and concise instructions to what is a bit of a protracted job!

@eSpares 4 жыл бұрын

Hi kev, thank you for your post and glad you found the video useful.

@leamingtonwoman2420 5 жыл бұрын

Brilliant video! We followed it step by step and did it with no problems. So pleased, thank you Matt and espares

@eSpares 5 жыл бұрын

Hi Leamington Woman, thank you for your post and glad we could help.

@dashcamdad9497 4 жыл бұрын

Awesome thanks, very clear and made replacing the belt on mine very simple. Cost £11 and about an hour for a DIY job rather than an expensive call-out repair. 👍

@eSpares 4 жыл бұрын

Hi Dashcam Dad, glad the video helped and nice job on the repair and bonus you saved some money.

@graemesutherland2867 6 жыл бұрын

Spot on mate! Nice instructions, made life much easier!

@eSpares 6 жыл бұрын

Thanks for the comments Graeme, remember to 'like’ the video if you enjoyed it or it helped.👍

@RobSchmooz 7 жыл бұрын

Thanks for the video. The dryer was slightly different to mine( but basically the same). Saved me from buying a new one :o) £11 for a belt as opposed to £200 for a new drier. Thanks again.

@eSpares 7 жыл бұрын

Thanks for the comments Rob, glad we helped.

@quintellian1788 5 жыл бұрын

Excellent: helped me with that uncertain 10% change your own tumble dryer belt- job done!

@eSpares 5 жыл бұрын

Hi Quintellian, thank you for your post and glad the video helped and well done on fixing it.

@jimgoodwin6294 5 жыл бұрын

Great video. I found on mine that the metal heater cover was very firmly stuck home. I had a look at what was left of the chassis and removed the two screws left at the top which attach the rear to the top rails. With these two screws removed there was just enough give to pull the drum back off its seal and guide wheels and refit the belt. I didn't have to remove the heater. Again thank you - without video's like this life would be way harder - as it is I have earned loads of brownie points........

@eSpares 5 жыл бұрын

Hi Jim, thanks for the great feedback and helpful tips. eSpares loves helping customers save money and fix their appliances. Well done for the fix!

@moxy909 6 жыл бұрын

Cheers, great tutorial, as with other comments, it was the belt on mine that required replacing. Thanks again.

@eSpares 6 жыл бұрын

Thanks for the comments. 😊

@julieevans3260 4 жыл бұрын

I have a working tumble drier! Thank you for the clear instructions 😁

@eSpares 4 жыл бұрын

Hi Julie, glad to hear your appliance is working again and you saved yourself some money. These are the comments we love to hear about.

@peterhutchings5091 4 жыл бұрын

great video, clear dialogue and just the job for replacing the belt, job done

@eSpares 4 жыл бұрын

Glad to hear this helped Peter. Thanks for tuning in!

@victoriaratcliffe3086 7 жыл бұрын

We last changed the belt on ours about 4 years ago and it was murder! This video is nice and clear, anyone could follow it. Thank you. Very well done!

@eSpares 7 жыл бұрын

Thanks Victoria for the comments, remember to 'like’ the video if you enjoyed it or it helped.👍

@malimed 7 жыл бұрын

eSpares Hi , my machine doesn't work unless I reduce load and manually give few turns to the dryer, quickly shut the door and press start. Is the belt old and loose or problem with motor? Thanks

@eSpares 7 жыл бұрын

The problem is likely to be the motor capacitor is failing, for more information see our diagnosis video: kzfaq.info/get/bejne/q5xmZJeFu9vLhpc.html and kzfaq.info/get/bejne/jMpod8aC1dGbZGw.html

@malimed 7 жыл бұрын

eSpares thanks

@seldom_seen_kid 4 жыл бұрын

I managed to perform this fix without removing the rear heatsheilds or heater. Just top, sides and top support rear screws which gave enough clearence to get the belt down the front of the drum. A good tutorial video though gave me a good starter for 10. 👍🏻

@eSpares 4 жыл бұрын

Hi Ed, nice job.

@russellbaldry6670 6 жыл бұрын

Excellent this is one of the best instructional videos ive seen.

@eSpares 6 жыл бұрын

Hi Russell, thank you for your comment and we try our nest ☺

@PeteSaul 5 жыл бұрын

Thank you - this was incredibly helpful. I would never have been able to figure this out by myself!

@eSpares 5 жыл бұрын

Hi Pete Saul, thank you for your post and glad we could help.

@kristofferrydquist8384 6 ай бұрын

This tutorial is excellent; thanks for taking time to make it. The Electrolux dryer I have is almost exactly the same inside and I ordered a new belt after discovering the old one torn apart and this will help me replace it. I hope to get some more years from the dryer!

@eSpares 5 ай бұрын

Hi, it's great to hear that our video is going to help you fix your tumble dryer yourself! Thanks for your comment. Hope your dryer is working now.

@chrisemmerson3308 5 жыл бұрын

Just saved myself £50 call out. Nice and clear instructions. Took me a while, but worth it. Would be helpful to add a reminder what screws go where when putting it back together. Thanks for your video!!

@eSpares 5 жыл бұрын

Thanks Chris for the suggestions. Glad to know you sorted out the issue. Remember to like and subscribe for more helpful videos in the future.

@stephenarcher1187 6 жыл бұрын

Thanks great set of instructions, even managed to follow it with my Condenser version, which has a few more wires, and piping!!

@eSpares 6 жыл бұрын

Thanks for the feedback, remember to 'like’ the video if you enjoyed it or it helped.👍

@dange160650 6 жыл бұрын

Excellent tutorial, it made it so easy, thanks

@eSpares 6 жыл бұрын

Thanks for the comments, glad you liked it. 😊

@benmannering1086 7 жыл бұрын

class, ordered belt, viewed video to fit belt and saved a wedge! cheers espares

@eSpares 7 жыл бұрын

Thanks for the comments Ben, remember to 'like’ the video if you enjoyed it or it helped.👍

@michaelwircer2038 7 ай бұрын

You are the MAN!!! Thanks for this comprehensive explanation. Saved me a lot of money❤❤❤

@eSpares 6 ай бұрын

Hi Michael, thanks so much for your comment! We are pleased our video has helped you to be able to fix your tumble dryer yourself! Well done for repairing your appliance and saving money.

@k.g4060 2 ай бұрын

Thank you it was very helpful ❤

@eSpares 2 ай бұрын

Hi, thanks for your comment...great to hear that you found our video useful, and we hope you have been able to replace the belt on your dryer to keep it up and running!

@mbaghurst 7 жыл бұрын

Life saver. Thanks!

@eSpares 7 жыл бұрын

You are welcome Marcus.

@TomT125 5 жыл бұрын

Great vid. Was able to fix new belt thanks to this vid. Keep up the good work

@eSpares 5 жыл бұрын

Hi Tom, thank you for your post, well done for fixing it and keep watching.

@eugenepaddison7400 6 жыл бұрын

Good vid made life so much easier thanks

@eSpares 6 жыл бұрын

Hi Eugene, glad we could help.

@vincentricher9038 4 жыл бұрын

great vid and spot on instructions .My belt was completely destroyed and wraped around motor spindle.

@eSpares 4 жыл бұрын

Hi Vincent, glad the video helped.

@sjefschaafsma5973 10 күн бұрын

Excellent video, great help getting things done

@eSpares 9 күн бұрын

Hi, thanks for your comment. Hopefully our video is helping you to replace the belt on your tumble dryer yourself.

@jekorus 5 жыл бұрын

Thanks , drier working again 👍🏻👍🏻

@eSpares 5 жыл бұрын

Hi jekorus, glad our channel could help.

@georgegemmell5296 5 жыл бұрын

Thanks for that great tutorial,just sorted mine 😀

@eSpares 5 жыл бұрын

Hi George, thank you for the comment and glad the video helped.

@andylucyrussonthomas4920 6 жыл бұрын

So helpful and clear

@eSpares 6 жыл бұрын

Hi Andy, thank you for the comment and glad we helped.

@philippash1046 4 жыл бұрын

Good video. Excellent camera work. Watched this and another good video, before attempted repair - obvious broken belt. Other video only took off left panel, but removed the centre bearing piece - to allow the belt to go over the drum. This method avoided taking off the right panel, the fan and the heater and needed no electrical disconnections. Pulley route needed a few viewings, but route is obvious when you consider how the belt achieves tension ! Repaired our expensive AEG condenser dryer. "Brownie Points" earnt from my wife after ordering belt whilst on holiday & masses of washing to do on our return ! (Daughter report the breakdown). AEG is very like this Zanussi. AEG has a slightly different bearing cover with a lubricant applier ? (similar to a electrical carbon brush). Straightforward with average DIY skills, although admit to having two different screws left over (not the "hidden" ones mentioned) despite taking great care in placing them all in a plastic ice cream container to prevent loss ! There are a lot of screws. Bearing circlip "pinged off (as they do), but held a cloth over it to avoid loss ! Many thanks. (Subsribed !)

@eSpares 4 жыл бұрын

Hi Philip, thank you for your post and nice job on the repair, thank you for subscribing as we have many more useful videos coming out.

@Ruddney4 7 жыл бұрын

Hi, just wanted to say thanks for the video. I have the same model. I couldn't get the fan off so I kind of did it backwards. Over the fan, motor etc then the drum. Took some wigling but did it ok.

@eSpares 7 жыл бұрын

Thanks for the comments John. The fan often sticks to the shaft when the nut is removed hence showing using a screwdriver to 'Knock it of' the shaft at 6:18. Glad you manged it at the end.

@marksmith5977 4 жыл бұрын

Fitting a new belt tonight, and will now be a lot happier to do it.

@marksmith5977 4 жыл бұрын

Followed this video, made life very easy, Mrs Smith very happy to have the tumble dryer up and running.

@eSpares 4 жыл бұрын

Hi Mark, well done for fixing it.

@jeanettereid5920 6 жыл бұрын

Thanks Just did it myself. It would help if my husband hadn’t lost the one socket size I needed and had to go searching.!

@eSpares 6 жыл бұрын

Hi Jeanette, well done on completing the repair and I hope we helped.

@ianhancock5657 4 жыл бұрын

Great video. I've just repaired my ZDE47100W using this tutorial. If you have the same model as me, you can skip removing the heater, and unplugging the internal connectors. Also skip opening and removing the fan. The design seems a bit more friendly to belt replacements (fan is the other side of the motor, and heater is at the bottom. The cables have enough slack to allow the drum to uncouple, without unconnecting). Thanks again :) A*******

@eSpares 4 жыл бұрын

Hi Ian, thank you for your post and well done for fixing it and some really good information to help other people good job ☺

@rayanrahmani6429 6 жыл бұрын

Thanks you made are life easier

@eSpares 6 жыл бұрын

Thanks for the comments Rayan.😊

@rayanrahmani6429 6 жыл бұрын

eSpares your welcome btw tnx

@TheFishbeast666 4 ай бұрын

Spot on, thanks.

@eSpares 4 ай бұрын

Hi, thank you for your comment. Well done for replacing the belt on your tumble dryer yourself, it's nice to know our video helped you to repair your dryer yourself!

@ubernaffa 4 жыл бұрын

You legend. Thank you.

@eSpares 4 жыл бұрын

Hi ubernaffa, we try our best ☺

@paulmoss8474 4 жыл бұрын

a great video just replaced mine, not so sure why all the back and heater element needed to be removed though?. Can easily be done without all that work but thanks it was a great help

@eSpares 4 жыл бұрын

Hi Paul, thank you for your post and glad we could help.

@stevenash7593 8 жыл бұрын

I just completed a belt change on Zanussi TD4113W. This is NOT a Condensing TD. Your video gave me helpful hints but suggested more work than necessary for this machine. Remove top. Two additional items on the sides : - the vent outlet on each side has a screw; - there was a metal clip at the front of each side panel that needed to be removed. After that only the top bar needed unscrewing from the back on each side. Then the back can be tilted (gently because there are still plastic parts screwed near the bottom) enough to withdraw the drum from the front of the machine. Put new belt around drum. The fan is not at the back of the machine so the pulley and motor are already accessible. Reassemble. Done.

@eSpares 8 жыл бұрын

Thanks for the comments and description Steve. Although you were working on a different machine the description given may help others with models similar to yours. :-)

@Leaferer 7 жыл бұрын

eSpares yes it worked for me needed to undo and redo everything you stated to change the belt thank you for spending the time to make a video I was just making sure that I did it properly

@eSpares 7 жыл бұрын

Thanks for the comments Andrew, remember to 'like’ the video if you enjoyed it or it helped. 👍

@hanadaabdelfattah4086 5 жыл бұрын

You really made things so easy. I did all the steps 2 years ago and my Zanussi dryer worked well. Now I have another problem, the belt is perfect but the drum doesn't spin. Although it makes sound like humming sound when it is on but no spinning. What could the problem be, please?

@itsallrobbish 5 жыл бұрын

Hanada Abdelfattah I need an answer to this question, too. At the moment, I put my hand in the drum, through the front door and rotate a quarter turn and it seems to work, but I’m sure it will permanently stop, soon. I think it is the carbon brushes of the motor. I have changed brushes on two washing machines and a Henry vacuum cleaner very easily, far easier than changing a drive belt!

@evaggeliakyrmanidou824 5 жыл бұрын

many many thanks my friend. I just save a lot of money. Kostas Greece.(13 euros the cost of the belt)

@eSpares 5 жыл бұрын

Hi Evaggelia, thank you for the lovely comments and helping people is why we are here.

@djdawless 4 ай бұрын

I have an old Zanussi condenser dryer that's around 20 years old which the belt recently went on, do you think I could still find a belt that will fit this? I don't have the part number as I haven't opened the dryer yet but the product number is TC - 481W, I'm just wondering if it's even worth opening if I can't get a part from 20+ years ago, I looked on Zanussi site and can't find anything. Ideally I would like to try fix it as newer appliances today break down just outside their warranty which manufacturers only give 2 or 3yrs warranty these days. The only repair my dryer has needed is this current belt breaking, I'm sure it has a lot of life left in it.

@eSpares 4 ай бұрын

Hi, it's great to hear that you are so keen to keep your tumble dryer working rather than buying a new one! We have the belt for a Zanussi TC481W on the eSpares website. Please note you will just need to checking the dryer's rating label (which contains your model & "product" number beginning "9" )...to ensure this belt is suitable for your particular version. If your label contains one of the 8 numbers beginning "9" as shown on this page in the green section, then this is the correct belt for you. www.espares.co.uk/product/es501196/tumble-dryer-poly-vee-drive-belt---1975h6

@keithstockdale8433 7 жыл бұрын

very good tutorial. very complicated machine.

@eSpares 7 жыл бұрын

Thanks for the comments Keith, remember to 'like’ the video if you enjoyed it or it helped.👍

@itsallrobbish 5 жыл бұрын

Very good. This is similar to the AEG version. I’ve found, so far, that the capacitor, to the left of the motor and the pulley wheel for the belt seem to fail before the belt goes. At £9 for the capacitor and £7 for the pulley wheel, they are cheap to fix.

@eSpares 5 жыл бұрын

Hi robert, they would be similar as they are both owned by Electrolux so made in the same factories but well done for sorting it.

@itsallrobbish 5 жыл бұрын

Thanks!

@thestalicho 5 жыл бұрын

On my ZDC47201W there is an Earth, Carbon-brush, on the front L/H of the drum which you have not mentioned. I assume this is for Static discharge. What is the part number Please.

@eSpares 5 жыл бұрын

Hello, part number ES625583 is the correct earth carbon brush for your model. Please follow the link below: www.espares.co.uk/product/es625583/tumble-dryer-earth-carbon-brush

@damothekiing 22 күн бұрын

thanks has the same pulley system as my electrolux

@eSpares 22 күн бұрын

Hi, thanks for your comment. Hopefully our video will help you to replace the belt on your Electrolux tumble dryer!

@jasonkerley5371 7 жыл бұрын

My dryer belt seems to be slipping! it hasn't broken but is stopping the drum from turning sometimes, the belt looks fine and has no fraying. will I replace the belt or could it be something else like the tensioner spring has loosened?

@eSpares 7 жыл бұрын

Hi Jason, a very common fault on old dryers is the drum may not start when full but will run when empty. This can be due to a failing motor capacitor. For more information see our 'Diagnosing dryer motor problems' video: kzfaq.info/get/bejne/q5xmZJeFu9vLhpc.html

@itsallrobbish 5 жыл бұрын

I replaced the capacitor on mine......sorted! Jason, do you hear a slight hum when the drum doesn’t turn? It’s almost certainly the capacitor that is the culprit. Just follow the start of this video, taking the side panel off. Be careful of the capacitor, it’ll hold a high charge. It’s the silver thing to the left of the motor. It’s dead easy to replace. It only cost me £9

@stevenstark2268 5 жыл бұрын

Any idea how to access the fan on a Zanussi Lindo 300. Your video shows the fan being accessed from the right hand side at the back of the machine but on the Lindo 300 the fan is on the left at the front of the machine and there seems to no room to access it? Thanks

@eSpares 5 жыл бұрын

Hi Steven, have you got the product number so we can have a look at it.

@stevenstark2268 5 жыл бұрын

When I enter my PNC number into Zanussi's website it shows as being model number: T8DBG48WC but around the internet generally it seems to be referred to as ZDC8202PZ

@eSpares 5 жыл бұрын

Hi steven, there are 2 fans on your model with a front and rear fan just like in the video at 5.22 you will need to get the cover off to access the fan and is usually held in by screws or clips.

@stevenstark2268 5 жыл бұрын

Thanks for the quick response. The tension wheel and spindle that I have to get the belt on are near the front fan though which is the one I don’t seem to have the room to access. Does removing the rear fan help with this at all? Obviously the motor housing is in between both of the fans as well.

@eSpares 5 жыл бұрын

Hi steven, it is usually easier to get the belt on by removing the rear fan as this does seem the best option, the front fan should come off but if too difficult we have removed the drum but that's a lot more work.

@MrShiftyWizard 7 жыл бұрын

my zanussi zde57140w is similar but belt keeps coming off the jockey wheel. the wheel has over 10mm sideways play on the shaft, is that right? the one in the video seems to have much less.

@eSpares 7 жыл бұрын

It sounds excessive so try replacing the jockey wheel as it is the most likely cause of the problem.

@MrShiftyWizard 7 жыл бұрын

thanks but the jockey wheel looks to be in good condition, just the shaft it sits on seems too long. That shaft is firmly connected into the motor housing. There is a circlip on the end of the shaft, I could take this off and put some washers (?) onto the shaft to hold the jockey wheel in line with the motor shaft driving the belt below, but I don't know if this could cause other problems.

@eSpares 7 жыл бұрын

Your machine did not always have this problem so something has changed almost certainly due to wear. It is most likely the pulley or the belt itself that will cure your problem, washers should not be necessary as the pulley should be 'self centering' hence the raised centre.

@MrShiftyWizard 7 жыл бұрын

Thanks, this was helpful info about the self centering pulley, it didn't look like anything had fallen off the pulley shaft as the circlip was in place. I've ordered a new belt and hopefully that will sort it, if not then I'll try a new jockey wheel. maybe the spring tensioning the motor against the belt needs replacing too to hold the belt tighter. Thanks.

@eSpares 7 жыл бұрын

Never needed to replace the spring, this should not be critical for belt tension so is unlikely to change in tension much. Good luck and please post when you have identified the problem.

@andrewdoyle6747 5 жыл бұрын

Thanks for the help looks like I have a hour our so work ahead of me..😭

@eSpares 5 жыл бұрын

Hi Andrew, you are welcome any time we can be of help let us know.

@MrsArcticRainbow 5 жыл бұрын

Is this the correct info for model Zanussi Autosense ZTE 135 please ?

@eSpares 5 жыл бұрын

Hi Michelle, your model is a similar design so the dismantle procedure would also be similar as the motor should be on the same side as the one we use.

@MrsArcticRainbow 5 жыл бұрын

@@eSpares Thank you very much for taking the time to reply! :)

@eSpares 5 жыл бұрын

Hi Michelle, anytime we can help please get in touch.

@toxytronic7364 4 жыл бұрын

Thanks for the video.I have one simple question: How easy is it to move the drum by hand?The problem I have is,that the motor starts running but turns off after 5 seconds as the drum won't turn.The shaft of the motor doesn't get a grip on the belt.Looks like the belt is too slippery or worn but trying to turn the drum myself by hand is not easy.Even after loosening the motor I have the feeling the drum is quite hard to move.But without being able to compare it to a similar tumble dryer I can only make assumptions. Anyway: Thanks for sharing your video - must have taken some time to record and edit it.

@eSpares 4 жыл бұрын

Hi Toxy Tronic, thank you for your post, the drum should be free but it does sound like the belt may have stretched but check the bearing on the back and the drum supports on the front and yes it takes a lot of time and effort to put the videos together nut it's worth it if it helps.

@toxytronic7364 4 жыл бұрын

Hi @@eSpares,thanks for your reply - much appreciated.The belt itself looks fine to me and is very tight around the drum.Almost thought too tight.But I will check the bearings as you suggested. Either the belt or drum will be the culprit.....

@welshcpl2004 7 жыл бұрын

great vid replaced belt today but when i turn it on it spins once then get red light any ideas

@eSpares 7 жыл бұрын

Check you have connected all the plugs especially the heater.

@welshcpl2004 7 жыл бұрын

done that runthe diagnostic thingy get 7 red 1 green

@welshcpl2004 7 жыл бұрын

on the vid attatched to the motor u have a black wheel that tensions the belt what is that called as mine has worn

@eSpares 7 жыл бұрын

The tension pulley is shown in this video: kzfaq.info/get/bejne/nq-lfMedppawcZs.html and the pulleys are here: www.espares.co.uk/search/ma332pt1966/tumble-dryers/pulleys/zanussi

@welshcpl2004 7 жыл бұрын

just ordered 1 ty for ur help