DIY BUDGET AUTOMOTIVE PAINT GUN for SMALL COMPRESSORS

Рет қаралды 28,327

Жыл бұрын

In this episode, we take a look and demo a diy budget automotive paint gun for small compressors. I'll go over some of the many benefits of painting your car with a lvlp paint gun and why these guns are perfect for hobbyists and anyone painting their car at home without a paint booth.
CHECK OUT MY OTHER HOW TO VIDEOS
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
paint gun and clear review playlist
• paint gun reviews
how to color sand and buff like glass
• Beginners guide to wet...
Autobody repair made easy
• Auto body repair made ...
how to prepare primer for paint
• How to prepare a car p...
using body filler to repair a dent
• Using body filler to r...
How to repair body damage on your car
• How to repair body dam...
My amazon affiliate store : Tools and materials categorized to help you find what your looking for
CLICK HERE
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
www.amazon.com/shop/garagenoise
In this video
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
aerpro a610/black
amzn.to/477SCcG
R500 lvlp paint gun for small compressors
amzn.to/3ggFQmL
upol clearcoat
amzn.to/3XhGtgj
upol 2k primer
amzn.to/3OzRRQZ
low cost disposable cup system 1.0
amzn.to/3PfhKWs
astro sun light
amzn.to/3YbFFtT
premium tack cloths
amzn.to/3FK35zw
prep solvent
amzn.to/3FCoRl7
raven latex gloves
amzn.to/3BsiGBb
3m paint mask
amzn.to/3UP7NQP
70% isopropyl alcohol
amzn.to/3uCCy0F
If you find this video helpful be sure to let me know in the comments. I welcome your feedback and questions
SUPPORT THE CHANNEL
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
LIKE AND SHARE VIDEOS
SUBSCRIBE!
COMMENT!
AFFILIATE LINKS!
www.amazon.com/shop/garagenoise
Business Inquiries: okpaintworx@gmail.com
Follow us on Instagram and get the scoop on upcoming projects!
/ garagenoise247
Follow us on Tik tok
vm.tiktok.com/ZMeV1et9D/
video equipment I use
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
Rode wireless go
amzn.to/3xpJDAW
Dji osmo action
amzn.to/3cCjdUD
Disclaimer:
Due to factors beyond the control of Garage Noise, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. Garage Noise assumes no liability for any property or personal damage that may arise from doing a repair on your vehicle after watching any of my repair video's. Due to factors beyond the control of Garage Noise, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Again Any injury, damage or loss that may result from improper use of tools, equipment, or the information contained in this video is the sole responsibility of the user and not Garage Noise.

Пікірлер: 121

@GarageNoise 10 ай бұрын

Great news! This gun ins now availible for purchase on Amazon amzn.to/3LwTZZh 1.3 tip and needle set and it comes with the series 1 pps adpter and some disposable cups!

@ranararon 11 ай бұрын

Great video and will keep watching all. Thanks

@sajidmahmood3668 11 ай бұрын

Great skill great job well done keep flowing these videos we love watching you paint

@GarageNoise 11 ай бұрын

Thanks brother! Appreciate the support!

@The_R-n-I_Guy 11 ай бұрын

Every painter I've ever met or seen on video has different techniques and tips for painting. The best thing to do is to pay attention to all information. And test your own different ways to paint. It might take awhile but eventually you'll find the way that works best for you and your situation. Buy some cheap leftover paint and test it on a junk fender or something. Just make sure that you prep the test panel as if it was a show car you're painting. Because prep is 90% of the paint job

@GarageNoise 11 ай бұрын

Absolutely right! 💯 appreciate your support brother!

@TavosMr 11 ай бұрын

Thanks to take the time to do this videos. 👍👍👍

@GarageNoise 11 ай бұрын

Glad you like them!

@knauerkustom 7 ай бұрын

thanks for the video! Seems I found my new gun for spraying guitars. sounds perfect for my task.

@GarageNoise 7 ай бұрын

👍

@jamesmarques7245 11 ай бұрын

Gun sprays really well. I like that it's a high volume low pressure, spray gun. I bought one for primer.

@joeminton105 6 ай бұрын

It's a lvlp. Not hvlp

@RevengeCustomPaintCo 11 ай бұрын

I just bought an R500. Can’t wait to try it out!!

@GarageNoise 11 ай бұрын

👍

@garrettguitar 4 ай бұрын

Great tutorial!

@gregorypeterson9 11 ай бұрын

Man!! this is awesome can't wait to try mine.

@GarageNoise 11 ай бұрын

Have fun!

@mmmmm1185 14 күн бұрын

Beautiful!!

@joeciechanowski4650 9 ай бұрын

super video. as for the gun, picked one up on amazon prime days (oct 10 and 11). had a few amazon bucks on my amazon credit card, and got the complete package for $46 shipped. as they say, it's all in the timing - 😄😄😄

@GarageNoise 9 ай бұрын

👍

@craigmyers5569 11 ай бұрын

I just bought a R500 gun at your recommendation. I was wondering if you could make a video on your air compressor setup for garage painting. Looking for tips to build mine correctly

@octanegarage3729 11 ай бұрын

Looks great 👍

@GarageNoise 11 ай бұрын

Thanks 👍

@kevinborshell6105 7 ай бұрын

Just got a gun like that great video just wondering tip sizes you used thanks

@r.markwood1763 9 ай бұрын

Great videos. I may not have found my answers yet as I am still reveiwing them. What is the smallest compressor that you suggest for LVLP painting, as budge is an issue? I will not be doing whole car sprays, but will be doing bumper covers and smaller accessory body parts...maybe a hood and trunk lid. Also, what is the disposable cup system you are using that use the special fitting to the gun? Almost all videos I have watched refer to this, but I am unable to understand the name of the system and have not yet found it in any notes attached to the vids. Thanks much, you are doing a great job in these, giving me the confidence to give this a try!

@user-wu4be5ve4h 11 ай бұрын

I am learning so much from your channel! Can you link or provide the regulator you use on your paint gun? Maybe a video on regulators? Also I would be interested in learning about different paint and the paint gun and tips you recommend for application. Lots of great content here for base and clear, is base and clear more durable than enamel? When would you use enamel paint over base and clear? What tip do you use with enamel? I restore tractors, Commercial mowers, Implements etc. Can I squirt these with base and clear? Is it more durable than enamel? Or just stay with enamel? I know base and clear cost more but getting colors matched is easier with Base and clear as no one really has scan tools for enamel near me. Thanks in advance!

@dj39st 11 ай бұрын

How do you chose when to blend one panel with the neighboring panel? And when is it ok to paint a panel alone ?

@Jopakilo 9 ай бұрын

Thank you for the review and demonstration. I have confusion between 1k clear and 2k clear 1k clear is clear + reducer and 2k is clear + reducer +hardener If I buy and use the 1k clear product, one day if I want to use 2k clear. Is it just add hardener to be 2k clear? Any difference if I buy 2k clear set from retailer? Thanks in advance

@FE428Power 11 ай бұрын

Ty for on the go adjustments.

@GarageNoise 11 ай бұрын

Keeping it real! Appreciate the comment and support!

@mohammedsabeel50 5 ай бұрын

@GarageNoise whats the smallest compressor you recommend for this lvlp gun i currently have 50 litre hyundai compressor

@belos65 11 ай бұрын

Okay! Thanks! But I have to remove all the orange peel with P600 sandpaper, before I put on new Clearcoat? Thanks! From Tommy

@impalaman4546 11 ай бұрын

Looking nice

@GarageNoise 11 ай бұрын

👊

@billsheehy1660 11 ай бұрын

Looking good

@GarageNoise 11 ай бұрын

Thanks 👍

@B.Washington 11 ай бұрын

NICE!!!! What compressor are you using?

@gerardotrevizo9243 9 ай бұрын

What compressor can I use for this gun to work good

@Green_gtw 11 ай бұрын

Great informative video. Thanks 😊. Question- at 5:30 you mentioned how to adjust the spray pattern to hit the tight spots. I just didn't understand what way to move with fluid and pressure when we narrowing pattern down. We have to decrease then pressure (to 10-12) and reduce the fluid by one turn down also keep gun little further away. Did i get that right????? Thank you 😊

@GarageNoise 11 ай бұрын

So when you narrow the fan pattern that will increase the air pressure. So you want to turn down the air pressure and the fluid volume.

@normd5776 9 ай бұрын

Hi Chris, thanks for all the great information. I do have a question. I have an A610 gun and plan on shooting a metallic, for these LVLP gun, is there a nozzle size you would recommend for metallic paints?

@GarageNoise 9 ай бұрын

I use 1.3 and have no problem with oem metallics. If your use a custom paint with larger flake you might need a 1.4 or larger. Appreciate your comment and support!

@belos65 11 ай бұрын

Hello! Thanks! For a very good Video. I have repainted my Bumper, from my Volvo. But when I had applied the first layer of clear coat, my compressor broke. It has been several days now. So the layer of Clear coat that I put on has hardened well now. But there were a few drops in a couple of places. And there was orange peel all over Bumper. Is it possible to sand off the orange peel on the Bumper even if there is only one layer of clear coat? Thanks! From Tommy

@GarageNoise 11 ай бұрын

Absolutely sand it dow with 600 without sanding through the clear and then you can apply your clear again.

@simplepictures499 11 ай бұрын

Is it okey to lower the pressure below tehnical data sheet, my aeropro r500 manual calls for 2-3.5 bar(2bar is 30psi) working pressure. Is it okey to go as low as 15-20psi?

@GarageNoise 11 ай бұрын

It is as long as you lower the fluid with it. Those recommendations are for optimal atomization of the paint or clear.

@johnsmith-qz4bv Ай бұрын

Great video …. Have heard. Or used this spray gun .. NASEDAL LVLP R500.? I think it would be the same right and that all R500 needle a caps should work ..?..

@GarageNoise Ай бұрын

Yes they should.

@johnsmith-qz4bv Ай бұрын

@@GarageNoise ty

@xpacmaner23 13 күн бұрын

how many litre that small air compressor? 2 gallons?

@toycoma98 11 ай бұрын

How is the first stage of trigger? I had the aeropro black and red but returned it because the airhorn wasn't machined right, trigger was gritty due to bushing not oring like the old r500, and the first stage of trigger was very short. I love the new design and it uses the same needle sets, but the older version is better in my opinion.

@GarageNoise 11 ай бұрын

Personal I haven't had a problem with any of my triggers. Some viewers have had some issues with some bad machining in the air cap , I guess it's to be expected from a inexpensive Chinese product. I haven't noticed any difference in the way they spray. I have the easwood version and the the R500 and now 2 versions of the new R500. Appreciate your comment and support!

@guillaumel3640 11 ай бұрын

Chris @garagenoise, what is the adapter for this gun and the A610? I want to use these types of cups. The PPS 2.0 is awesome but way more expensive for the same thing

@GarageNoise 11 ай бұрын

The series 1 adapted for thi gun. Is the spectrum #57505 from harbour freight. That's what I use.

@guillaumel3640 11 ай бұрын

@@GarageNoise thank you very much Chris much appreciated :-)

@Techie_ASMR 11 ай бұрын

so new to this.. so what do you after the clear coat? should you cut and polish? and then wax?

@GarageNoise 11 ай бұрын

Only if it's got imperfections that you want to clean up like dust or peel. I guess it depends on how you want it to look. Ideally if you can put down a nice clean finish you don't need to cut and polish.

@Techie_ASMR 11 ай бұрын

@@GarageNoise thank you very much.. that helps a lot. i really wanted to ask because your clear coat was perfect, keep up the good work. you help a lot of us with these videos. thanks again and have a great day!!

@jameswilliams8252 11 ай бұрын

Great job what size compresser are you using what cfm is it

@GarageNoise 11 ай бұрын

It's an ingersoll rand producing 16.5 CFM

@zacharyvaughn8135 4 ай бұрын

What air pressure would you start out with with a 1.5 tip on this gun using epoxy primer ?

@GarageNoise 4 ай бұрын

About 25 for primer

@jamespolucha8790 2 ай бұрын

I’ve never painted before but I’m trying and my base coat is spraying like colored water very thin and transparent,I tried the put a heavier coat and it just ran, I’ve sanded it all off 2 times just can’t get it right, what am I doing wrong, my gun is all wide open and air pressure is around 20 psi now I’ve tried changing the settings and nothing same thing happens, base coat is mixed 1:1, should I go 2:1 ?

@GarageNoise 2 ай бұрын

20 is ok maybe a little low try 24 psi and 2 turns out on the fluid volume. I suspect you paints not being atomized enough. Put the fist coat on light let it flash for 10 minutes and add another coat. If you not getting enough paint out of the gun gradually bump up the fluid volume. Let me know the results

@lsx_espi 11 ай бұрын

How long are your flash times between coats? Do you have let everything air dry?

@GarageNoise 11 ай бұрын

You don't have to let everything air dry, but I perfer too, unless it extremely cold. Allow 10 to 15 minutes between coats. In this heat 10 minutes from the time you start spraying. Appreciate your comment and support!

@timpage5899 3 ай бұрын

What would you recommend for pressure with this gun for single stage?

@GarageNoise 3 ай бұрын

28-30 psi

@Scrappydootrades8256 11 ай бұрын

I bought the A610 and I already had a R500. I did a sprayout test from 6 inches away both 1.3 mm tip. For some reason the air cap on the A610 is more ovaled and only makes about a 9 inch pattern while the R500 cap makes an 11 inch pattern. I swapped the cap from the R500 onto the A610 and it fixed the pattern problem with the A610. Have you noticed anything like that with these air caps? Aeropro sent me a new cap and needle set and the same thing happened. I can only get an 11 inch pattern at 40 psi with the A610 cap.

@GarageNoise 11 ай бұрын

Really I haven't noticed anything like that but it wouldn't surprise me being it's a inexpensive gun. The company may work with you. Sound to me like the air holes in the cap may have been machined poorly.

@toycoma98 11 ай бұрын

The needle sets should be the same on both guns.

@Scrappydootrades8256 11 ай бұрын

Aero pro customer service is great. They are working with me and sending me a new gun. I was just curious if anybody else noticed this problem. It has nothing to do with the needle set. It is just the air cap. The air cap itself is not the same part at all. The difference in spray pattern is not highly noticeable and it still sprays nice. It just sprays as if the fan pattern is turned in a little.

@cjcarpenter8366 9 ай бұрын

Hey Chris, do you use the little internal plastic filter on the r500? I just had mine clog up real bad and am contemplating not replacing it. Thanks!

@GarageNoise 9 ай бұрын

Throw that away and don't use it. You don't need it strain paint and your good. I honestly wish they would stop including those with paint guns.

@cjcarpenter8366 9 ай бұрын

@GarageNoise Thank ya sir!

@chrisguzman7926 11 ай бұрын

Will this be good with an 8cfm 20 gal compressor?

@GarageNoise 11 ай бұрын

Yup, that should be good.

@unclebs4732 11 ай бұрын

Can you show us how to get a DEEEEP look with multiple coats of clear? Do you spray 3 or 4 coats of clear, sand and apply more clear? Thanks Chris.

@GarageNoise 11 ай бұрын

Yeah, I can do that. I have a jeep we'll be doing an overall paint job on maybe I'll do something custom on that with a flow coat.

@satamanschmidt3428 11 ай бұрын

You never do that all at once. You put on two coats. Let that dry completely (2 to 3 days of sitting in the sun normally works) sand it down with P1200 and then flow coat it with two more coats of clear.

@johnsmalling2982 11 ай бұрын

With all the brands and model numbers now that are similar to the R500, is one of them significantly better or worse than the others?

@GarageNoise 11 ай бұрын

No, they're the same gun with different sellers. One seller might be better than another but the guns are the same. Rong peng is the manufacturer of all these guns I'm 99% sure. What I think is, they offer different color schemes and branding for sellers. Rong peng released and updated appearance of the R500 recently and that's the aeropro a610 and now the yt160 . If you looking for the best seller it may be the Eastwood company they're R500 is marketed as the lt100 . It's also double the price for the same gun. Anyway I hope this helps.

@jonathannelson2629 11 ай бұрын

What cup system is that? And whats the adaptor required to fit them. Hate the standard cup. Thanks

@GarageNoise 11 ай бұрын

This is not the exact one but one I have used. Master Paint System MPS Disposable Paint Spray Gun Cup Liners and Lid System, 40 Pack Standard Size 20 Ounce (600ml) Kit - 40 Cup Liners, 40 Lids with Strainer, 1 Hard Cup with Retainer Ring, 10 Plugs www.amazon.com/dp/B081HFFNV2?ref_=cm_sw_r_apann_dp_BYJZ2C6TMH05VKYQA4JR The adapter is from harbour freight spectrum part #57505

@daveblack2734 11 ай бұрын

Great video. I bough the R500. Have you got any gun cleaning videos?

@user-wu4be5ve4h 11 ай бұрын

I ordered the A610 after watching your videos. Nice that these guns are inexpensive. I looking at buying a second. Would you go with the original R500 or buy another A610?

@GarageNoise 11 ай бұрын

You might try the original. They spray the same tho

@user-wu4be5ve4h 11 ай бұрын

Thank you!!! @@GarageNoise

@kenneth6731 7 ай бұрын

Is this, or an equivalent modern gun available in pressure feed?

@GarageNoise 7 ай бұрын

I'm not positive but I think so. Google the company Rong Peng that is the manufacturer, I think they have a siphon feed version.

@thomasweatherford5125 11 ай бұрын

What’s a good size air compressor for some garage paint jobs?

@GarageNoise 11 ай бұрын

Ideally a compressor that produces 15cfms. The smallest I would recommend is a 30 that produces 5cfms. Might still have some air fluctuations tho.

@thomasweatherford5125 11 ай бұрын

@@GarageNoise - thank you. I need to upgrade my little pancake compressor that works well for nail guns and (eventually) airing up tires lol. Definitely need something bigger. 👍🏽

@jreyes619 11 ай бұрын

How does this compare to the r802?

@GarageNoise 11 ай бұрын

R802 is a great gun. It sprays well and produces a great finish. It does use more air than the R500 so not great for small compressors but if your not concerned with air consumption it's just as good as the R500

@robhudson86 10 ай бұрын

Any tips for using this gun to spray a metallic single stage? I’ve been told it’s tricky but no one seems to give any tips haha

@GarageNoise 10 ай бұрын

It's not tricky, the main difference is single stage. Single stage you want to spray like clear coat. The #1 tip I can give you is to put a light to medium coat on first this introduces the paint to the surface and gives you a good sticky base to apply a wet second coat. If you try to put the first coat on wet it can run easily. Hope this helps!

@nashcodm2831 11 ай бұрын

How does sealer mix primer with hardner?

@GarageNoise 11 ай бұрын

Is your question how to mix the sealer?

@jeffdickson125 11 ай бұрын

@@GarageNoise I think he's asking how the UPOL can be both a primer and a sealer all in one product

@mikemikeyee 11 ай бұрын

What’s an “undersized” compressor to you?

@GarageNoise 11 ай бұрын

There's a big jump from a compressor that runs off 120v to one that uses 240v So, somwhere around 30 gallon I consider undersized for painting that doesn't mean they won't get some jobs done tho.

@nantisaja1310 9 ай бұрын

compare with aeropro a610 please

@GarageNoise 9 ай бұрын

Same gun different color.

@volkanazman1767 2 ай бұрын

Size of compressor what litre pls ?

@GarageNoise 2 ай бұрын

80 gal 15 cfm compressor. Check out this weekends video I'll be spraying with a small compressor. It's very interesting!

@corneliusdevenney1848 2 ай бұрын

There add says 9 to 11 cfm?

@GarageNoise 2 ай бұрын

Yes it does, I really think they have no clue what it actually is. I don't either for sure some sellers say less and some say more my guess is it's between 5-7 cfm but I can tell you this consumes less cfm the any gun I've used by comparison. With one exception, the orig R500 I believe uses a bit less air.

@corneliusdevenney1848 2 ай бұрын

@@GarageNoise thank you I ordered it and it should be here today we will see if I can figure it out I have see a bunch of your videos and think I can do this a am going to try and paint a golf cart thank you for all of the grate information

@Chooyong 10 ай бұрын

Is this under brand YuanTie?

@GarageNoise 10 ай бұрын

Yes

@Chooyong 10 ай бұрын

@@GarageNoise thank you, i just bought 1, now i have 1 piece aeropro r500 and 1 yuantie yt160.

@wild8757 11 ай бұрын

The link you put for that gun is not for the same gun you’re using in the video

@GarageNoise 11 ай бұрын

I thought I mentioned it in the video, this paint gun in this color is not yet available. The gun in the link is the same gun different color sold by a different brand.

@wild8757 11 ай бұрын

OK cool , I grabbed a aeropro A610 because it comes with several needles, going to try it out tomorrow. Thanks

@The_R-n-I_Guy 11 ай бұрын

Gotta get an R500 gun

@GarageNoise 11 ай бұрын

👍

@bigears4014 5 ай бұрын

I'd hate to be doing something big

@satamanschmidt3428 11 ай бұрын

I know you like this gun but the fan seems smaller than the one on my SATA MiniJet. I realize the limitations you have without a proper booth but the fan pattern on a spray can of USC 2K clearcoat is bigger than what you use. You really need a spray booth badly.

@GarageNoise 11 ай бұрын

Oh, I'm sure the fan pattern is smaller for sure. I believe it's around 10in .

@lupenilangi9991 7 ай бұрын

Sure that will be a easy and cheap solution no doubt...