SIMPLE Paint Gun HACK for INCREDIBLE Results!

Рет қаралды 614,132

Күн бұрын

New to Painting or a Seasoned Veteran? In this video we show you a simple trick that you might have been missing out on! When it comes to painting this is the number one paint channel for tips and trick to nail down any paint job no matter who you are. CLICK the play button to start the learning!
🟢CHECK OUT OUR ONLINE STORE🟢
www.amazon.com/shop/paintsociety
🔺SHOP ALL Exclusive Products found on our KZfaq channel for your project! 🔺
Products in this Video:
Paint Guns:
DV1 Base Gun: amzn.to/37AlEHw
DV1 Clear Gun: amzn.to/3L3mwmH
PPS 200 Micron: amzn.to/38kCIBF
PPS 125 Micron: amzn.to/3vaqAw7
PPS DV1 Adapter: amzn.to/3LaXTF1
Paint Strainers: amzn.to/3Os9emd

Пікірлер: 466

@markvest5413 Жыл бұрын

Retired 15 years ago after professionally painting for 35 years. Love these videos and truly miss being a painter. Had to retire do to cancer. You guys out there use the respirators. I started painting in the 70's so alot of shit was done differently. Peace

@lpgibbo7463 Жыл бұрын

I'm 22 years in my friend, everything from bicycles to fighter jets & vintage WW2 aircraft here in the UK. I've always used a full face mask with breathing air connected to there own separate designated compressors but I remember the older guys (when I started) telling me about half masks & vaseline(petroleum jelly?) with a bandana round the head to keep overspray out their hair! Some health & safety isn't just a pain in the arse! 😊

@boostismagic Жыл бұрын

Sorry that happened man. I hope you find some joy in simple things and enjoy part of every day...and good luck. It wasn't in your lungs was it?

@ModifiedTaco Жыл бұрын

Hope you are ok.

@jamesofallthings3684 Жыл бұрын

That's what scares me so much about it. Hope you beat it.

@emrecenkers9721 Жыл бұрын

I wish you health.

@miguelromandv7 2 жыл бұрын

We need videos showing how to paint single stage paint with small compressors and LVLP guns. Most of us are DIY guys and don't have the expensive tools

@Athiril 2 жыл бұрын

I used an ozito gun from Bunnings from the twin package and after much trial and error, I’ve gotten nice results with metallic paint of all things (wish my car wasn’t metallic paint now), I left the plastic filter in and has saved a few bits of crud from shooting into my paint

@cg7975 2 жыл бұрын

LVHP if there is such a thing - otherwise known as conventional guns

@stevezack6077 2 жыл бұрын

Eastwood has a hvlp gun that just needs a 33 gallon

@dirtboater1 2 жыл бұрын

Yes! If like many of us your using a 110V compressor, you have trouble maintaining the 6CFM that the purple HF gun wants. How many gallons your tank holds only affects how long you have to wait for the compressor to catch up!

@miguelromandv7 2 жыл бұрын

@@hobbyautobodyfun9315 that's not 100% true. The prep is important and makes a good spray job last, it doesn't make a bad spray job good. The gun makes a difference as well as technique. It's just not that cut and dry.

@skeldrif351 11 ай бұрын

Two things, I put the little filter with the little nob stick pointing up, this makes it easy to remove when cleaning the gun. Second thing I run a 50/50 mix of ascitone and lacquer thinner over the little filter every time after use this keeps it nice and clean. I've been having good results.

@yusefmessallam 3 ай бұрын

thanks for not polluting the video with like/ subscribe requests (unlike some other channels). Simple and straightforward presentation. 👍🏻

@jonathanking6546 6 ай бұрын

How funny, that little filter came with my gun, but I didn’t know where it went. I painted without it and love my finished product. I painted a semi truck with single stage paint. Thanks for the video.

@djordjeradevic3307 2 жыл бұрын

The best teacher for DIY painters. Detailed explanations, step by step guidance.

@alexshatner3907 4 ай бұрын

We all knew that, that little piece needs to be removed, we are not naive specially if we use these sprayers to spray paint.

@Ivor372 2 жыл бұрын

Just painted my car in my drive way today after watching hours of these videos, aside from good ol bugs landing in the clear went smooth

@wickedgood1984 2 жыл бұрын

Crazy how one little part can make a difference.

@immanutt4442 11 ай бұрын

that's what she said

@pablotrefheld1 3 күн бұрын

Great explanations and highly instructrive video’s. Can’t wait to try!

@chetgingerich2551 2 жыл бұрын

It is so satisfying to see the transformation. It’s addicting. I want to paint another project. But then I’m reminded of my pickup sitting in my garage, I need to sand out many runs, and cut n buff.

@edwardmylnychuk5774 Жыл бұрын

as someone that used to paint his own vehicles when we had acrylic enamel and not this clear coat stuff, i will be looking for that type of paint when the time comes. when i did my own vehicles people were amazed at the quality of the paint job and would ask me to do theirs which i did not. my ex son in law was a body man and he commented all the time on how my paint jobs were better than most of the shops he worked in but like i told him i take my time because its my vehicle and i dont want it looking like crap in 6 months like in some of his work that he did on his vehicles. like you, i used to put more than one or tow coats of paint on so it looked good and it lasted.

@pyromedichd1 Жыл бұрын

I'm not a painter much beyond some machine tools or spray cans but I learned more in this 11 minute video than from any other previous source. If I ever start doing much painting I'll come back here.

@daveblake3382 2 жыл бұрын

When the gravity guns became popular in the early 90's I threw those internal plastic strainers away, I used a quality strainer, didnt see the need for anything restrictive in the gun

@burntkorn Жыл бұрын

Wow! I’m just now learning about painting, Glad I found this tip…I would have used that stupid little filter religiously and probably never figured out why my painting sucked. Thanks!

@wazid0122 2 жыл бұрын

I use the strainer inside the gun with no issues just clean it out when you cleaning the gun an still use the paper strainers also

@OvunixClashRoyale 2 жыл бұрын

I havent had too much experience personally with painting at all YET (off and on for the past 2 years, mostly rattlecan and rattle can clearcoat with some really good results), and I finally bought some guns off eastwood and they had the filter in them.. well I have been using the filter and obviously since I don't have much experience I don't expect a perfect finish, but it doesn't come close to Brians (probably gun settings honestly since I am getting used to HVLP) After I finish painting, I let the filter soak in laquer thinner with all my other parts for about 10 minutes or less, and clean everything thoroughly. I also use the paper strainers, however I am going to give it a try and take out the filter from the gun and only use the paper strainers. I have a clearcoat job in the morning and I am excited to see if this changes anything and pumped to see how nice it hopefully will be.

@stevec5657 2 жыл бұрын

I remember those little s.o.b.'s helping me mess up panels when I was 1st learning how to paint. As soon as I ditched 'em, totally different experience! I don't think I've ever come across a video that talked about those gun filters, so thanks for pointing them out.

@G.I.JeffsWorkbench Күн бұрын

Great tip. Thanks for sharing it.

@blowduke Жыл бұрын

I could watch you paint all day ..

@godfamilycountry4211 2 жыл бұрын

Appreciate your tips. Enjoy all your lessons. Thanks so much for taking the time out of your busy schedule to produce these videos. Thx for educating us.

@TonyBrown-lf5nj Жыл бұрын

Old school works good job .i spray metal iron door units black, ive sprayed now 44 years and with current spray tech advancements makes ya love spraying even the more . Nice Red .

@sakarit123 9 ай бұрын

I think that little tip on the filter is supposed to point up, so you can grab it while removing the filter.

@gadsdonflag4289 2 жыл бұрын

I use that same gun and it works surprisingly well for the cost. I simply run lacquer thinner through the gun when I'm done painting and that cleans it out very well. Every 5 or 6 paint jobs I take the gun completely apart, soak the innards in lacquer thinner and then reassemble. I've been doing this for several years now with no problems......

@Vusseyv Жыл бұрын

You’re really good at this, not only your professionalism, but your presentation skills. Top content.

@CarlosGomezosorio-ct7vx 4 ай бұрын

Está muy bueno muy profesional te felicito

@michaellamoureux8105 Жыл бұрын

Im loving the tips your offering me, I never even knew what the dials on a paintgun were for until I started watching you my friend,Im getting towards painting my dodge hemi in my makeshift paint booth in my backyard,,,ie a carport ,but after your tips im getting damn good,thanks a great deal,

@RecoveryRoomRestorations 2 жыл бұрын

always learning something from you!! Thanks once again!

@Honda90996 2 жыл бұрын

Always great information! I’ve learned so much! Thanks!

@fredf4562 Жыл бұрын

Thanks Brain I was about to start a project and was about to ask you if I should use the little filter ! I saw this and there was my answer ! Great videos and you do an amazing job teaching!

@christopherklosowski8213 9 ай бұрын

Great videos , even though i have been painting for many years , with all the new technology out i have had to adapt to the new procedures and new paints . Your videos are a great way to get caught up with the new methods , thanks for taking the time to do these videos, they are greatly appreciated .

@vernetobierre6987 2 жыл бұрын

I agree, it looks good.

@bensweazy2913 Жыл бұрын

Great tip....I was having problems getting enough paint volume, but after watching this, I removed that little filter and it made a substantial difference in the results....thanks!

@jarm6862 2 жыл бұрын

I love it... you do it simple and easy to learn

@skipperandy2199 Жыл бұрын

Thank you great video, will apply your techniques when I paint my boat.

@herberthooverjr4406 Жыл бұрын

Great job Brian,keep up the tutorial of painting vehicles love it

@Greasiest_weasel 2 ай бұрын

I sprayed some 50 ish micron glow pigment in some clear right through that little filter. It has the consistency of fine sand. The inline filter is more like a debris screen cause it ain't filtering much.

@mikewilshire6444 Жыл бұрын

I'm doing the door bottoms and whole box on my 2009 pu. I've watched several of your videos and can't believe how many tricks there are. Today is the day. I feel that I can pass as a painter but not a body man. Whatever the result I thank you for the professional tips and well presented videos. It's just paint.

@renecenteno5921 2 жыл бұрын

Great video Brian, thanks for explaining how to use that pps system. When I tried using that it didn’t go well, leaked horribly and it was probably user error like you have said in a previous video.

@keenabog 10 ай бұрын

Brilliant, clear speaking and knowledgeable

@peterolley7159 Жыл бұрын

Brilliant video it was very satisfying watching that clear coat go on and your a brilliant teacher Thankyou

@williamconrad5055 Жыл бұрын

Very well done! You made this video easy to understand and was entertaining to watch the whole video, thank you!

@wingman8447 Жыл бұрын

Amazing stuff as usual. Thank you

@miranderm1 11 ай бұрын

another awesome one Dude !

@jc-pj3nh 9 ай бұрын

Great technique video showing how gun is held and and back and forth motion and the double spray coverage with the clear coat vs the paint coat application. Thanks!

@tajungkang3602 2 жыл бұрын

Thank you very much brian,been looking for this guide,been thinking if i should remove it or not,because it restricting my paint after multiple use,keep up for more tips and guide, all the best👍

@alexbetancourt6378 Жыл бұрын

Damn, nice tips and paint job!

@1970sajee 2 жыл бұрын

super finishing Great

@halfbreed8878 Жыл бұрын

Thank you.. Great job

@zubairtoffar4224 2 жыл бұрын

Brian taking guides and learning from your experience is something only results can answer Biggest fan over here all in South Africa wishing you a blessed life and more knowledge, please help me and send me one of your old favourites of spray guns that is not in the usage stages .. Thank you

@keithfork8663 2 жыл бұрын

Great demonstration.

@victorwilks88 2 жыл бұрын

Thanks Brian 😊 you the best 👌

@PedroGonzalez-yr7nw 8 ай бұрын

I learned a lot from the shop video s...thanks...it's awesome... Working

@kurtvara4918 Жыл бұрын

Awesome Video, thanks.

@kuntz144 Жыл бұрын

Thanks again for another great video 📸

@mikebrown4429 Жыл бұрын

i bought my first paint gun yesterday from harbor freight and was looking at that filter thing wondering what that was for . now i know , thanx

@camman61 Жыл бұрын

looks great !

@gregsantos9731 2 жыл бұрын

Wow beautiful!

@marioscicluna6057 2 жыл бұрын

Greetings from Malta in Europe. I never sprayed anything before but your videos gave me enough knowledge to spray my dad's car exactly a year ago which came out great and saved us a lot of money. Now I have the confidence to spray my classic car. Any video on how to setup a home garage "spray booth" with filters so that i don't have trouble with neighbours? Thanks again and congrats on your baby!

@saltycardcollector9372 Жыл бұрын

I actually like using the filters in the gun. But I put them into the hopper and not the gun. It catches all the stuff in the filter from the hopper and all you do is take it out and use a air hose to get all the stuff out the filter. Run some acetone into the gun and filter and it’s good to go for the next day

@DVDAVL2007 Жыл бұрын

Just STUNNING💯👌

@PaintSociety Жыл бұрын

Thank you! 😊

@chriscunningham7972 Жыл бұрын

Thanks for the info

@steveplowman4005 2 жыл бұрын

Great video for a beginner; Goodbye filter! I think I will try the PPS cups. Cheers Steve

@angelmorales220 2 жыл бұрын

Nice job keep up the good work.

@tomingram4108 9 ай бұрын

Great video I still use the small filter even though I use the paper filter as well but I DioGuardi the in gun filter after every paint job and have never had any problems

@MrDuLukes 2 жыл бұрын

Hey Brian, great video as always. As far as I understand, these are single use filters. I've worked with Sata RPS cups, they send the cups and 2 types of filters: 125 µm for usual basecoat and clear and 200 µm for sealer, clear or basecoat with big metallics (rather special bascoats, will say so in datasheet). In those cups you can/need to apply the filter you need yourself everytime. Don't know about availability in the US though, I believe it's a German company. But anyway, to me it looks like the filter mesh is a lot broader, so it might be like 200µm filters....? Have a good day.

@AlexRoza 2 жыл бұрын

I love to watch ur videos , I buy some stuffs just to practice, and give to my brother, just for hobby for me.

@toycoma98 2 жыл бұрын

I like to blow the inner chambers with air before i use them because sometimes paper towels and shop rags can leave lint inside. The 3m plugs actually fits in the adapter so you can leave it there when not in use, keeps lint and dirt from getting inside the chamber. Check fan patern on paper on the wall to purge out any lint or dirt thats left before painting.

@anthonycollazo891 Жыл бұрын

Love the videos thanks for the Links in the description

@mandymoo7406 2 жыл бұрын

Good video as always,great clear how to's

@danfarris135 2 жыл бұрын

I filter the paint before putting it in the cup old school style.

@gerardvandenengel9217 2 жыл бұрын

love it,goot explenation.keep up.

@Badassracecarcpt 2 жыл бұрын

Beautiful

@jimknowles5483 2 жыл бұрын

Thanks!!

@SmooveBee1 6 ай бұрын

Gorgeous!!

@alirazmjou2149 2 жыл бұрын

Thank you so much for this video سپاسگزارم

@Frankie0100010 Жыл бұрын

Watching this guy work gives me the patience and thoroughness I sorely lack in my life.

@jimfeaster4837 2 жыл бұрын

Great input appreciate it

@allenhess6583 Жыл бұрын

Thanks I learned a lot with just that video. Easy to understand very well explained. Greetings from Maine

@Oldschoolcustomrides Жыл бұрын

Nice...good advice.

@hulk412 2 жыл бұрын

great video man thanks you.

@tthams73 Жыл бұрын

100% correct!!

@juliopr9079 2 жыл бұрын

Great Video! 👍 Thanks for your time! Can you try to make a video spraying clear coat with the DV1 Basecoat gun?

@GarageNoise 2 жыл бұрын

Nice work brother!

@jamesgrant3911 Жыл бұрын

great job

@kahoycrafts 2 жыл бұрын

Nice job, you're an excellent teacher! 👍 I recently sprayed some homemade cabinet doors with my Spectrum HLVP conversion gun and got pretty good results using Sherwin Williams Infinity diluted 1:4. Do you have any tips for woodworkers, or for those painting objects other than cars?

@jimhalcrow7874 2 жыл бұрын

I love all these videos 💪

@nooraldeenjumhour2847 Жыл бұрын

Thank you brain I learned many things from your videos 🌹❤️❤️

@jimfeaster4837 2 жыл бұрын

Nice clean job...

@saltcitycyclesllc 2 жыл бұрын

Brian, great videos, I'm new to painting. Started rehabilitating classic motorcycles a couple years ago and every paint job Iv done has been rattle cans, using 2k clear on the tanks to avoid gas damage, "learned that the hard way" but want to take the next step and use mixes and guns. Where do I start? Other than all your videos! Thanks for any help

@steventimme5268 Жыл бұрын

Hi Brian. Really enjoy your videos. Learning a lot. Maybe you can do another video showing the difference between filter/no filter using the same HF gun. I would assume cleaning the filter after each use would mitigate the issue you were having, but it would be nice to know for sure.

@mike479 2 жыл бұрын

I ran into this issue on the weekend spraying primer using a borrowed gun. Stupid filter clogged up and sprayed like box liner. Took the filter out, nice and smooth!

@statusquoreject Жыл бұрын

Clicked for that gorgeous white S2000 and stayed for the valuable info

@junereycustoms1470 7 ай бұрын

Thank u sir for sharing

@lesskinner8588 2 жыл бұрын

The pot neck strainers also restrict paint flow too much. I just cone filter the paint (basecoat, 2K solid or clear) as I put it in the pot, and also pop the lid cap. When spraying this allows that little better airflow through the lid, and it doesn't leak if you're careful with tilting gun for under edges etc only with paint flow happening.