DIY Built-In Dresser for Walk-in Closet!

Рет қаралды 32,344

Күн бұрын

We recently replaced my daughters dresser with a storage unit for her toys. That meant we needed some drawers to house her clothes. We have always wanted to build a built-in dresser for her walk in closet and now it was go time. I decided to build a 5 drawer dresser with two smaller drawers at the top and three larger drawers below. This setup provides a ton of storage and while plywood is extremely high right now, I was still able to build this unit for a little over $400 which saved me thousands if we were to have it custom made.
Plans: rogueengineer.com/diy-built-i...
DAP WeldWood Wood Glue: bit.ly/3AcjhXW
DAP Premium Wood Filler: bit.ly/39UBC0V
DAP Alex Flex: bit.ly/3yoeBNg
Note: DAP recommends using a putty knife for wood filler application and a finishing tool for caulking tooling/smoothing.
Learn more about Ryobi HP Tools: www.ryobitools.com/products/o...
-------------------------------------------------
SUPPORT ROGUE ENGINEER
Buy a shirt: bit.ly/rogueSHOP
Shop on Amazon: bit.ly/rogueAMZN
Shop at HomeDepot: bit.ly/rogueHD
-------------------------------------------------
BE SOCIAL
/ rogueengineer
/ rogue_engineer
/ rogue_engineer

Пікірлер: 13

@tremolo34 2 жыл бұрын

I really like your builds, dude. I plan to do your master closet built-ins for our new build. Eventually do your hibachi build and some other outdoor space stuff. It’ll make the wife happy!

@sapelesteve 2 жыл бұрын

Fantastic job you guys! That dresser turned out great! Nothing beats DIY.... 👍👍😉😉

@PratyushTewari 2 жыл бұрын

Thank you for making this great process video.

@carterscustomrods Жыл бұрын

Nicely done!

@g.efaber482 2 жыл бұрын

Great build! Thanks so much for sharing.

@rogueengineer 2 жыл бұрын

Thank you!

@aprilshowers2277 Жыл бұрын

good gift

@josephpauwels4331 2 жыл бұрын

Wood glue doesn't really stick to Pre finished plywood. you should really sand that off.

@JMC8415 2 жыл бұрын

Why are you applying wood glue to finished wood?

@EricGrayEricLeePhotos 2 жыл бұрын

I thought you had to scape a prefinished surface where the wood glue will be in order to get proper adhesion?

@carterscustomrods Жыл бұрын

Traditionally, yes. But since he is using PH the glue is more of an assist, and it will penetrate the finished face a bit through the screws entering. But if it were me, I'd have definitely scuffed them a great deal. But I'm also not a fan of screws. I use PH jigs, but instead of screws I prefer ⅜" dowels. Plus, if I'm not painting it (which is the only time I buy prefinished plywood) it looks beautiful if you can use a dark walnut dowel as your joint, and make it exposed. But it would be moot for this dresser build.

@mr.eastcoastgrow6132 Жыл бұрын

Im a contractor new to woodworking. I need to build a big 70 inch wide 40 foot tall closet built in and im lost trying to figure out where to start and how to make it easier. Im so screwed