DIY Cheap Garden Sprayer Fluid Transfer Pump Speedy's Garage

No video

DIY Cheap Garden Sprayer Fluid Transfer Pump Speedy's Garage

Рет қаралды 60,495

Күн бұрын

Join the Channel for the full HOW TO content! / @speedysgarage
Pump Sprayer: amzn.to/3nQfz21
Vinyl Tubing: amzn.to/3KBV0zi (1/4 ID)
Ball Valve: amzn.to/413Jfqx (5/16")
Hose Cutter: amzn.to/3Ke333V
Heat Gun: amzn.to/3ZIA3ac
Stuff I use:
Fuel Drain Line: amzn.to/3h0u4wX
Fuel Pump Relay Bypass: amzn.to/3Hii7h7
Fuel Hat Lock Ring Tool: amzn.to/3UzGCJD
Thin Profile Wrench Set: amzn.to/3P72ElR
Hose Clamp Pliers: amzn.to/3UgSpwX
Weather Pack Pin Tool Set: amzn.to/3uAnxwm
Torx Bit Set: amzn.to/3zOcG50
Pry Tool Set: amzn.to/3t1KGqH
Inch Pound Torque Wrench: amzn.to/3hgaSeC
3/8 Drive Torque Wrench: amzn.to/3t1CmXQ
Nut Driver Set: amzn.to/3NEE8HQ
Race Ramps: amzn.to/2Sicrdt
Race Ramp Low Profile Extension: amzn.to/2MhlDLa
Tire Rack: amzn.to/38X0foa
Cordless Ratchet: amzn.to/3uxBwkV
Cordless 1/2" Impact: amzn.to/2MlxMyL
Cordless 3/8" Impact: amzn.to/2sPLm6K
Ratchet Set: amzn.to/2QbKsJK
Wrench Set: amzn.to/374jt9R
Impact Socket Set: amzn.to/3o06wYh
Impact Socket Set: amzn.to/3xSpiW5
Lug Nut Set: amzn.to/3o1maCu
The provided links to the items recommended may be associate links. The great news about this is you pay the same price for the items you'd buy anyway, but the channel gets a small commission to help fund it.
I had an upcoming maintenance project and decided to build a diy cheap fluid transfer pump from a garden sprayer.
Don't forget to checkout my website
www.speedysgara...
Like us on FaceBook if you do that kinda thing / speedysgarage
Follow on Instagram
/ speedys_garage

Пікірлер: 55

@MSmith-jf5wo 26 күн бұрын

We always heated the 80/90 gear oil in hot water, before using it to change lubricant. (Ya HAVE to in Cold Weather, ya know?). Lol...

@thisisyourcaptainspeaking2259 2 ай бұрын

Next we need the vacuum version for fluid extraction.

@iFixJunk 2 ай бұрын

That's what I thought he was going to somehow make out of this.

@Blakehx Ай бұрын

@@thisisyourcaptainspeaking2259 ya that’s what I was coming here to say!

@TR4zest Ай бұрын

Hot (just off boiling) is a safe way to make a tube or hose malleable.

@akbychoice Ай бұрын

You can also heat up plastic pipe, slide it into a spring that is just big enough to put the plastic pipe in, bend it keeps the shape round. Personally I just used a piece of copper pipe and use a silicone vacuum plug cap on the end of it when I’m not using it.

@jamman012 2 ай бұрын

I use a gear oil marine pump for filling a boat motor lower unit. I just wanted to say that works great for me.

@jimpie231 25 күн бұрын

Nice video! But, I bought a Black & Decker “Jack Rabbit” pump 25 years go. It’s a hand rotary tubing pump. I have used it for gear oil, trans oil, PS fluid, brake fluid, etc. It fits down the tubing of a dip stick for oil or trans fluid. When I overfilled something I could correct it easily. I always rinsed the inner part of the tubing with alcohol.

@davestewart9146 Жыл бұрын

When you’re done using it just loosen the pump handle, open the ball valve and use a little shop air to push most of the fluid back into the pump sprayer, great idea Sir 👍😁

@jeffwinkelman6574 Жыл бұрын

Sand works great inside the tube to not collapse pvc tubing when heating and bending. Just for future reference.

@SpeedysGarage Жыл бұрын

Great idea!

@barrymurray8264 Ай бұрын

Nice thought process. Good products. Cannot see this not be a good tool, well done.

@patrickpk6299 22 күн бұрын

bigger pumps have larger tubing, so just start with a bigger pump @16:40 I'm gonna make one thx

@Blakehx Ай бұрын

Nice project, thanks!

@BigTyler 9 ай бұрын

When i made mine i used a piece of brake line to bend into the hook then you screwed it right to the ball valve and put a barb fitting on the other side to hook to the hose

@sors1599 7 ай бұрын

Just bought all the stuff I need according to this video.. I’ll be making my own later tonight, thanks for the video 💪🏽

@jamram9924 Жыл бұрын

The only issue I have with this type of vinyl hosing is they tend to dry much faster when flushing/cleaning with brake cleaner. I began using purple degreaser like ZEP from HD to clean that hose.

@CavanalK5 24 күн бұрын

I wonder if you could use a plastic bladder or plastic baggy inside it to make cleanup a little easier. Great video and DIY project! 👊🏼

@MrFezco 7 ай бұрын

doing this today... going to leave the original line to the wand and just cut it off and attach the ball valve. clear tubing from the ball valve to an adapter (have one that fits into the fill fitting). for other cars I'll swap out the adapter for an open ended tube. thanks!

@mjktrash Жыл бұрын

I think it will be fine as long as you don't try to pump cold (i.e., winter time outside temps) gear oil.

@jeffrowlan9877 Ай бұрын

i used a Shrader valve in 2 sprayers . the sprayers have a pressure ReLeafon them from the factory

@philliphall5198 Ай бұрын

I used a garden sprayer for light weight oil or gas

@brianjones192 Жыл бұрын

Nice. Will have to think about this. About time to change those fluids in the Ram.

@sors1599 7 ай бұрын

Same I have up coming but very much needed preventative maintenance on my Ram and BMW this will help tremendously

@lorenray9479 Ай бұрын

Hot water, maybe a bit 0 soap for fittings.

@GregariousAntithesis Ай бұрын

For the frequency we need to address gear and tranny/transfer case fluids 1 foot of clear vinyl tubing on the end of gear oil spout works just fine. Im not going to dedicate or clean a pressure bleeder to this job.

@johnr5545 Ай бұрын

Nice job god bless

@lorenzodominguez2623 Жыл бұрын

LONG LIVE THE HEMI V8 🤘

@AndrewBrill1 Жыл бұрын

Amsoil has the bag and nozzle design that works good for the job.. but this more universal tool is likely good for all sorts a things

@christopherbrown5338 6 ай бұрын

Very cool!

@deerphoria4314 5 ай бұрын

how come you just didn't use the wand that it came with so when you press down it releases and when you let go it stops?

@akbychoice Ай бұрын

@@deerphoria4314 the fluid takes forever to go through the weed sprayer small valve.

@America2gether Ай бұрын

Could you use the trigger mech instead of the valve?

@MSmith-jf5wo 26 күн бұрын

Too small of an "Orifice" in the trigger mechanism, for Very Viscous Fluids.

@302esky 9 ай бұрын

Put the hose into a bucket of hot water ..

@burtoncomensky6992 Ай бұрын

how would yo reverse it to extract gear oil from one plug ford

@akbychoice Ай бұрын

You can attach a vacuum to a container bigger than the fluid amount needing to be extracted. Just don’t do it with flammables like gasoline.

@sonofsteve566 7 ай бұрын

great minds think a like good job, But the big question was the pump strong enough to move heavy gear oil?

@SpeedysGarage 7 ай бұрын

Yes, absolutely

@kblend7225 8 ай бұрын

why not use the hose it came with

@oleskoolcabby5710 7 ай бұрын

I was thinking the same 🤷🏽‍♂️😂

@sors1599 7 ай бұрын

I’m guessing to see the fluid travel through the hose in most instances you don’t want to pump air into your project, like brake lines and stuff

@Catholic_warrior_of_Christ 5 ай бұрын

7:45 👏

@Asmoday72 11 ай бұрын

Just Curious... On the bend you did where it inserts into a trans, diff, etc., ...what is the length you determined that seemed to work the best...?

@SpeedysGarage 11 ай бұрын

About 2 inches.

@Asmoday72 11 ай бұрын

Thank you…👍

@peterd5246 8 ай бұрын

How do you clean it?

@SpeedysGarage 8 ай бұрын

Soapy water, then just hot water.

@mikepek3863 Ай бұрын

Did you use 5/16" barb ball valve deliberately or because you couldn't find a 1/4" one at that time?

@WilliamTythas Ай бұрын

I'm guessing he went with that to maintain a 1/4 inside diameter and a fit that would not require a clamp

@Catholic_warrior_of_Christ 5 ай бұрын

7:01 heat

@kjtaco04 5 ай бұрын

What kind of knife was that?

@codyg13 Жыл бұрын

What brand knife is that? That thing is sweet.

@SpeedysGarage Жыл бұрын

Benchmade Infidel. Favorite knife I've ever had.

@codyg13 Жыл бұрын

@@SpeedysGarage Thanks! I see one in the future as a self-bought birthday present! Lol!