I've applied this 2 weeks ago on my new car, it can go on most surfaces except glass for safety reasons (glare). It will go on poly carb binical speedo and screens. They advise that it's great on touch screens particularly because of keeping finger prints off. Also, they recommend that you don't spray directly onto the interior panels. Spray directly into a pad then spread it around the panels, I used a medium size Gyeon pad that doesn't absorb the ceramic coating keeping the product on the surface and not in the sponge- highly recommend you do the same. They really could do with making these statements on the bottle. I've done a fair amount of research into this before I made the leap to spend £47. So far so good. Apparently the liquid inside the bottle is more fluid then water meaning that it won't fill microscopic hole and pores keeping the finish similar to its original finish. It does slightly darken the surface. The whole idea of this product is to make cleaning a lot easier, reducing stains, rejecting dust, its would keep spilled liquids like cans of drink on the surface of the seats for instance so that you can clean up before it soaks in. I like it. I understand it and feel its worth. I had to find out what surfaces it can be used on by watching a lot of Yvan and Nicks channel. It will go on Alcantra as its a form of microfiber, probably not seat belts for safety reasons I'd use common sense. Analine leather and white headliner found in common cars probably not due to a slight colour deviation and could easily alter the appearance. I am with you on the fact they should print this information on the bottle. I've not scanned the QR code yet.

Good to see a uk KZfaqr locking at diy details products, I love all the products that I have, have just coated the wife's car with the 5 year coating, its mint

Ideas for testing: - Look at the finish (kind of subjective, I hate glossy finishes for interior) - Test durability in 2 ways: - Chemical resistance with an interior detail, stepping up to surfex for a torture test - Friction resistance by setting up something to continually rub over a test piece of leather (like the wiper test you did for glass coating). - Price like you normally do - Instructions, quality of the bottle/sprayer etc. like you normally do - Ease of application like you normally do - Ease of cleaning by getting a coated surface dirty - Stain resistance by letting some coffee dry on some plastic perhaps - Fabric water repellency by tipping a cup of water on some carpet (don't spray it / atomise it, pouring represents a "spillage" better)

Very detailed review as always John👍 💪

I saw your TW Inside Job with Graphene interior cleaner. I love that one because it helps with dust accumulation 👍. Good to see Lola👍

Great on satnav, great on all fabric. Plus the spray nozzle is doesn’t need cutting down it’s ready to go. Headlining if they get damp they can let go never good to have a sagging headliner.

It is the same trigger that came with mine, just went out to check my bottle and mine leaks too. I've just put the original cap back on. Thanks Jon, you are a legend 🙌

"Yesss, I'm filming grrrr! 😤" "Love you 🥰" Classic 🤣🤣🤣

Yes you can use it on cloth seats, carpets, convertible tops and navigation screens. DIY details KZfaq channel has videos on all of this.

All I use on my interior is APC to clean it all, then use window cleaner on all panels and the dash, and it keeps it all matte. I use GTechniq Leather Protect on all the seats and leather door cards. Cheap and easy.

At last a DIY product :) Cheers

Gutted you uploaded this today while I was out buying something for our leather car seats. I ended up buying the AutoGlym kit from Halfords for just under £30 which includes the cleaner,a balm,cloth and applicator. Hoping you rate the AutoGlym 😂

Good vid mate, is touch on also something to be concerned about when turning it into a liquid via snow foam?

John i got the feeling that when you spilt this on the worktop you thought to yourself why havent i used interior dressing on the worktop before

Spray them on taped off sections of some fabric and see how well they resist water, juice, foods and do your dirt test.

i wouldn’t put it on windows I saw video how Ivan explained it how to apply it personally bought it applied it in interior except carpets and windows and i sprayed it on applicator 4 months later i don’t know what to think about it i assume that is protecting my interior i will say that my interior been easier to clean love your videos keep up the good work DIY been good to me

I'd love to see this vs Adams UV Interior coating, Gyeon Leather Shield, and carpro Leather v2, and maybe some of the trim ceramic coatings. I decided to go with Gyeon Leather Shield on the leather, CarPro Dlux (already have) on the trim, and 303 fabric guard (already have).

I wouldn't call it a dressing at all Jon, so much more than say 303👈 I'm on my 2nd bottle and I even use it on my Alcantera inserts and leather, it's a GREAT product 👍👍

Hey John another product you could try is ez car care, finito Interior detailer I've been using it for a year and it gives you that oem finish and it's cheap as chips , I would love too know what you think of it 👍

i have it applied already 6-7month ago, once in the 2 weeks i give the car a quick clean with rinseless and its really good, probebly for what i noticed the steeringwheel is getting dirty quicker and not so fast to clean as in the first months but still good, the rest of the car wipe with a damp cloth and dry with a clean cloth and its good to go, and that after 40k km in 6-7months. So it makes youre interior easy to maintain and a nice oem look, but yeah other products can do that as well, but for how long? but the best of this product is when you use it on youre toch screens it works fantastic less fingerprints and so easy to clean and without streaks

DIYDetail here in the states is one of the fastest growing car detail brands because their stuff just works, easy to use, and aren’t crazy expensive.

Film a review on all DIY Detail products please.

As for assessing the effectiveness of these interior products, you could set up a decent salvage dashboard to test on, which could be left outside for uv testing. Bit like your bonnet you have already!!

Somethkng to include in your test (maybe too difficult though) - if the product causes any build-up or film on the winscreen.

❤19:36 wifey "GO AWAY!" 🤣👏❤

Here in Australia the DIY ceramic interior cost's $114 which is around 55 quid. So it's expensive. But l like their products and I've used their rinseless, ceramic gloss, waterspot remover and they all work well. I won't buy the interior stuff until it's much cheaper though. Damn shipping cost's. My staple is 303. Great video!

I want to see how the Interior Ceramic stacks up against your typical water-repelent spray you can buy for carpet/upholstery/shoes. The claim is obviously going to be durability but I'd like to see it tested.

Be interesting to see a response from Ivan on this - spraying seems an odd choice due to the high chance of overspray - lots of space left on the bottle for better instructions/more detail

I like use the clean and protect style products in well maintained cars such as autofinesse sprits, i have just ordered some P&S swift so fingers crossed thats good!

Big fan of the Rinseless wash, and didn’t get any streaking with quick beads. Plus any question you have or suggestions with sticking in the video of cybertruck interior video they did with this the otherday as the do answer any questions which is good for the brand and not something every manufacturer does. I’m tempted to try out a paint ceramic as it has a 1 hr cure time. If Gyeon could get their coatings like this I would have probably used theirs by now as big fan of what I have used but without garage access and British weather finding the weather to prep, decon, polish, PW and ceramic and then still have 12 hrs of dry weather here isn’t easy

I wonder if it would help protect high wear areas like the sills trim and boot tim as well as arm rests, seat adjusters and other touch points?

get a junkyard dash and leave in sun for a week? like a junkyard test hood

Have you used/tested Cockpit Premium?

PRO GRD, pro grade?

You need a marker pen .... And chocolate coffee etc on a test panel of material such as leather or plastic ....❤

I don't believe that's the correct trigger. DyI's triggers are black on all the items I have ordered.

DIY is definitely quality product.

38:37 Tolco Gold don't leak?

For me if such a product actually works I’d like stain resistance on fabrics, carpet, and leathers/vinyls. Perhaps stubborn areas of seatbelts and headliners. Things that are easy to stain and hard to clean. But dashboards, door cards, steering wheels etc I’ve never had any issues cleaning.

Enjoyed the review mate. Won't be buying that. No way is it worth that price tag.

For me interior ceramics need to be for fabrics, seats mats door cards, that’s where I see the benefits repelling dirt, water from soaking in, does a dash need it

Be intresting to see it on thre walls

How much 👀👀👀👀

If the bottle is not airtight will it affect shelf life - £47 is a lot - I'm a sucker for new stuff but its too much for me.

Hi John, I have contacted DIY Detail regarding these Spray nozzles as the grey ones are not for these bottles.

I believe Yvan also says you can use it on literally all interior surfaces.

The TW interior ceramic is good still attracts bit dust though

Assuming that the DIY Detail product came from in2detailing, they recently seem to have changed the sprayers they ship with those products, they used to be black as in the DIY detail youtube videos, but this time my ceramic gloss order came with the grey one like yours too. That said, the old ones needed trimming as well! which I agree is a pain Got to the end of the video: the sprayers they used to ship definitely were air tight! I hope that this is an error from the distributer rather than an update made by DIY Detail themselves

If this product actually left a long lasting sheen I'd be interested, the fact it doesn't means I'm not. Just being a one and done UV protection is it's only real selling point as far as I can tell.

You actually push down and screw on. Don't cut the straw.

No need to trim the DIY straw Jon. I did that at first until Yvan said as it is will still work

About the cost of Touch-less for the USA

The straws are longer so they get all of the product from the bottom of the bottle I think that's what yvan said

Just don't see the need for it personally Jon. I have some interior dressings/detailers which I like for quickly wiping over the dash & door cards with the more dirty lower sections getting a scrub pad & some APC. These 2 basic products do everything I require for interior cleaning.

As ever, your video is always fuly concise and informative but, I will be totally honest, £47 for a bottle of interior cleaner/sealer, yeah never going to happen - My 12 year old Edition 35 GTi still looks new inside using the £4-7 per bottle products.

I don't see the need for interior coatings at all.

£50 quid ?! you must be mad. No matter how goood this is, its too expensive for my blood, as DIY driveway pro-sumer. I'd say the best value for money is the carpro perl. dilute down and can do multiple jobs around the trim interior and exterior in 1 bottle, and is dilutable in water. If its a dedicated dressing TW inside job would be the best value imho

Price explosion. Way to pricey

The video DIY Detail released shows them spraying directly into towels/applicators. No idea why it says spray to surface in the instructions, seems wasteful at best, dangerous for health at worst...

I watched a video on this Jon when it came out and someone used it in a car and i asked a question about durability or something like that and the main man from DIY relied : READ THE COMMENTS BELOW ! Think i hit a nerve .

You are not using the sprayer that came with it

Tested this out on half my interior and after a month my conclusion is its a waste of time and money. It didnt seem to make any difference in terms of ease of cleaning plastic and leather and it does add a very slight sheen to the surface. I cleaned and rinsed with a damp cloth before drying and applying. Unfortunately i wont be using it again.

DIY detail stuff isn’t for me!

I like their products but I think their instructions are terrible. I've watched a bunch of their videos and the instructions in the videos contradict what's on their bottles. You shouldn't have to watch a video to learn how to use a detailing product. The instructions on the label should be sufficient. For example, their panel prep. Yvan in the videos will tell you that you must spray on one towel and wipe off with a clean separate towel. Never spray directly onto the panel. The instructions on the bottle tell you to spray on the panel and wipe off. Also just got to the instruction part of the video. Again, this label contradicts how they instruct you to use it in their videos. They instruction you to spray onto an applicator and wipe off. The black sprayer is the one that came with the product.

DIY detail is mediocre

Hi, how about if you interviewed Yvan Lacroix from@diydetailofficial and ask him questions. Something different.

@diydetailofficial

Like how you always tell the truth and call out BS 🫡

I wouldn't call it a dressing at all Jon, so much more than say 303👈 I'm on my 2nd bottle and I even use it on my Alcantera inserts and leather, it's a GREAT product 👍👍