No video
DIY electronic enclosures made from PVC pipe for IoT devices
Рет қаралды 3,509
Күн бұрынI was always looking for better cases for my DIY IoT devices like sensors and actuators.
PVC pipes are easy to get and cheap. With a bit of heat and a few tools you can really get creative and make almost professional looking enclosures.
@mydiytutor 2 жыл бұрын
Very cool casing made with PVC pipes.
@pamelatragas7638 2 жыл бұрын
Great pipe project!
@veronikahoffmann4266 2 жыл бұрын
Very cool! But does the magnet not interfere with the electronics?
@edsteve 2 жыл бұрын
Magnetic fields are static. So as long the magnet stands still and doesn't move around the electronics there should be no interference. And after years of using this sensor. I can't recall any problems so far :)
@bgradediy5267 2 жыл бұрын
edsteve is correct about the intereference. May i ask how you found that video? Did you look for pipe enclosures? :)
@veronikahoffmann4266 2 жыл бұрын
@@bgradediy5267 No, I came over from Reddit. :)
hs9 Tech
Рет қаралды 2,4 М.
Handmade Creative Channel
Рет қаралды 1 МЛН
Sergio Outdoors
Рет қаралды 37 МЛН
You DON'T NEED an Expensive Mold to Make PLASTIC PARTS | Vacuum Casting | Serious Engineering - Ep21
Star Rapid
Рет қаралды 335 М.
GreatScott!
Рет қаралды 792 М.
Gaus DIY
Рет қаралды 2,4 МЛН
Circuit Desolator
Рет қаралды 4,6 М.