DIY epoxy trailer floors

Рет қаралды 12,071

Жыл бұрын

We used a garage floor kit to finish the floors in our new enclosed trailer.
Check out our brand
Our Brand: Free2Ride.com
Our Print Shop: IHPrints.com
Instagram:
Free2Ride - / free2ride
In House Prints - / in_house_pr. .
Tyler - / tylercary
Alexa - / lifeofa.fem .

Пікірлер: 15

@brentlangford 19 күн бұрын

Thanks man, just bought a 7x16 and this floor is exactly what I am going to do. My walls are white so this will be perfect.

@babaganoush1022 29 күн бұрын

I see. That you did the rock solid for the colors and the epoxy for the clear coat. Did you use it over the color and if so with it being essentially the step down from the rock solid did you have any bonding, or not setting up issues between the two?

@soupysocksenduro Жыл бұрын

Awesome job! really like the way it turned out, I have a Similar Trailer (Stealth 16x7') Mustang. I am still deciding which way to go with it atm, but your video put another option on the table for me! I will do a review on my trailer soon!

@warrenlowe676 8 ай бұрын

Looks great! Might have wanted to sand with 60-80 grit prior to first coat on the floors though. Cheers!

@freespirittransport5139 6 ай бұрын

100% agree. Much smoother surface, and probably less paint per square foot. Throwing some sand in the mix on the ramp is a good idea as well.

@aaronbowe9997 5 ай бұрын

That black floor looks bitchin!! The stain came out rad aswell!! Well done

@TylerCary 5 ай бұрын

Thank you!

@fro101 2 ай бұрын

Hows it holding up 1 year later?

@HeyEricGardiner 6 ай бұрын

Did you caulk between any of the side wood and the floor wood? I have a small gap at the rear of the trailer and it feel like I should caulk it first.

@TylerCary 6 ай бұрын

I didn’t, there was some already. If you don’t have any I would do the floor first and then do that or silicone after. The epoxy breaks up on the caulk edges so it would be cleaner to do last in my opinion.

@jonasrueda4195 6 ай бұрын

The floor came out really sweet. How slippery is that floor when it is wet?

@TylerCary 6 ай бұрын

Not too bad, for sure use the traction stuff on the ramp areas

@DJMEDIC671 5 ай бұрын

What size trailer was this done on? Would say one box is enough for a 6x10 barn doors?

@TylerCary 5 ай бұрын

This was a 14x7.5 if you can get two you will have plenty, the wood soaks up a lot. But it should cover, if you don’t open the second box you can always bring it back.

@DJMEDIC671 5 ай бұрын

@@TylerCary thanks