Very nice video! You covered most items and did a great job!! My only pet peeve would be to PLEASE use a torque wrench for the fuel filters ( I think they're 28 mm) and on the oil drain plug ( if memory serves 27 ft/lbs?) Also, the oil drain plug is not an exact fit for 3/8's drive extensions, they actually make exact fit square drive plug tools (SnapOn, Mac, etc) ... Should someone overtighten these components, you will have a bear of a time extracting ... using easy outs and barrel extractors, while not getting paid for your skillset. Ask me how I know... "Good and Tight" don't work in todays world any longer, not with micro precision engineering. Also don't forget to change the drain plug gasket or copper. (Can't remember on this model) Otherwise GREAT job and Thank You!!
@Sdukes00111 күн бұрын
This needs 37s
@brentlangford16 күн бұрын
Thanks man, just bought a 7x16 and this floor is exactly what I am going to do. My walls are white so this will be perfect.
@justinsmith656620 күн бұрын
lol my 2017 f350 came with 34”s now it has 35s and can still go bigger with touching the suspension yet.
@dennytuma23 күн бұрын
if half your wheel well is inside the trailer wouldn't mean LESS interior room not more
@TitoTellsTheTruth26 күн бұрын
Remove the rust before painting if you want it to last
@babaganoush102226 күн бұрын
I see. That you did the rock solid for the colors and the epoxy for the clear coat. Did you use it over the color and if so with it being essentially the step down from the rock solid did you have any bonding, or not setting up issues between the two?
@josemuller5897Ай бұрын
Aqui no Brasil as concessionárias estão usando óleo 10w40 e 15w40, estranho, pois no manual pede o 10w30.
@user-hl1bb7ii5wАй бұрын
Thank you for this video geeat contact plenty information ❤
@2greenifyАй бұрын
Go robot 👏🏻
@lamarkx2259Ай бұрын
Does it play music?
@thehoofersclubАй бұрын
Hell yeah! Looks sharp.
@idecidenotyouАй бұрын
Um.. umm.. u.mm.. um um um um... uuuummmmm... jesus dude..
@fro101Ай бұрын
Hows it holding up 1 year later?
@truckerwithleukemia2 ай бұрын
What in the world you guys don’t go through all the process what about bleeding getting the air out of the oil filter? How do you guys do that? If you guys are going to make videos you need to make it all the way through us all the steps.
@TylerCary2 ай бұрын
We pre fill the filter before installing
@23cummins68rfe2 ай бұрын
installed the kit on my 23 , with 51s , my driver side cushion or spring shifted , spring is rubbing against frame , have you noticed anything with yours ?
@tunaboost48012 ай бұрын
Did you replace your track bar? Because if you didn’t it sounds like your front axle isn’t centered. An adjustable track bar would fix that. I have one on my 5th Gen.
@23cummins68rfe2 ай бұрын
no didnt think it was necessary with these new rigs , but its in the books that i would like to, they also repositioned the cushion an fixed think they had the spring backwards over at the shop i went to
@Bigdaddyy692 ай бұрын
Amazing background and clean ass Ram 🤙🏼
@leodeboca2 ай бұрын
great!
@Swindy17942 ай бұрын
That’s a $15000 trailer… at least
@TylerCary2 ай бұрын
I got it for $13,500
@john848sbk12 ай бұрын
put the stupid tow mirrors down and that's a nice truck
@Sdukes00111 күн бұрын
Maybe he’s towing a 👻 trailer
@johngammon68752 ай бұрын
3/8's for th oil pan tighten 37ftp torq
@alanhaines49482 ай бұрын
Surprised they don't give you two clamps. Make sense to take that boot off and clean everything properly.
@xGR1MxREAPERx2 ай бұрын
What is the point of doing this? If you tow a 400lb trailer your gonna be sky high let alone towing 10,000lbs…. Do you guys buy these diesel 3/4 ton trucks to drive around town and be cool or what the fuck lol.. your rear is higher because when you load the truck it levels it out. All you highway Queen drivers out there with trucks that measure the same front and back and towing shit.. Unless you have air bags I guess but Jesus…. Buy a car if your not gonna tow and just want to look pretty and get shotty gas kilage with 35” tires and a truck that never hauls..
@TylerCary2 ай бұрын
I did it because I like it. It hauls our toy hauler fine, along with our landscaping trailer and cargo trailer. I use my wife’s raptor for around town when we are not pulling anything
@akathedude3266Ай бұрын
to each his own bud. so you troll youtube videos you don't even like, shoot down anyone that would watch this video, and why? Lets start a discussion on your pettiness shall we.
@xGR1MxREAPERxАй бұрын
@@akathedude3266 I stated it so other people don’t do it and then suffer when their $70-100k truck can’t tow a 2000 lb trailer cause the front end is aimed at the sun cause you used a leveling kit and the front is 3” higher to start with.. it’s a free country.. I’ll comment on whatever video I want. So F off 😂
@akathedude3266Ай бұрын
@@xGR1MxREAPERx i am 100% grown men are aware.
@robertclymer69483 ай бұрын
My 2015 F-150 sport supercab 4x4 does not have this boot, so just the PTFE lube and some Blue locktite needed. So check your setup before ordering the $35 Ford kit for lube and a single clamp. FYI
@josephfrotton65223 ай бұрын
Great Video!!
@mbstxb75793 ай бұрын
Too dark can't see
@krisbramman61443 ай бұрын
I have a 2019 2500 and fit 35x12.5x20 on stock suspension.
@skip-uo8sy3 ай бұрын
Any rubbing issues?
@krisbramman61443 ай бұрын
@@skip-uo8sy no rubbing issues. My wheels are a 20x9 with a plus 20 offset
@Jasonrcsd3 ай бұрын
do you make merch too?
@TylerCary3 ай бұрын
We run a print shop
@johnc75733 ай бұрын
Hey man great video. The oil filter cap is a must and it’s a cheap part to get on Amazon. Just did my truck today and I will say that when I put the new oil filter on I did it from up top to better see what I was doing. Just had to take the pipe off from air box to turbo. Did it hand tight and then a quarter turn with filter wrench thru wheel well 😅
@125club3 ай бұрын
Getting some soon thank you for the video !!!!!
@markleblanc65904 ай бұрын
🌷 "Promo SM"
@23cummins68rfe4 ай бұрын
cant wait for the same set up on my 2500 !
@user-cw1su7vw3n4 ай бұрын
This kid doesn’t have a glue, in 3 years this thing will be a beat up. What do you think it will look like when you hit something?
@TylerCary4 ай бұрын
I think you mean “clue”
@ekphrastic_poet53624 ай бұрын
Nice breakdown for newbies. This video really helped answer many questions I had roaming around my mind. Thank you for sharing your experience.
@tluangaazl89204 ай бұрын
which is better plastisol or water base for this process?
@TylerCary4 ай бұрын
We like plastisol for this but it can be achieved with either.
@InspiredChannel695735 ай бұрын
if you take the intake hose from the air filter to the turbo off you will then be able to unscrew and lift the filter off from the top just a tip to not make a mess on that pretty truck i love ram they are great trucks and that's why i drive em
@TylerCary5 ай бұрын
I’ll have to try that
@wildmanofthewynooch70284 ай бұрын
Thanks I would rather do that. It might add an extra 20 min to but I don't have to reach in and try to blindly tread the filter. Thank you very much!
@miguelsolorio55445 ай бұрын
Hi thanks for your video Israel good explains everything but I have a question your truck make noise when you turn your steering wheel to the left mind mine make a horrible noise
@JM-sj4wjАй бұрын
That is probably you power steering pump
@DJMEDIC6715 ай бұрын
What size trailer was this done on? Would say one box is enough for a 6x10 barn doors?
@TylerCary5 ай бұрын
This was a 14x7.5 if you can get two you will have plenty, the wood soaks up a lot. But it should cover, if you don’t open the second box you can always bring it back.
@DJMEDIC6715 ай бұрын
@@TylerCary thanks
@firdous.bhatsonamarg70805 ай бұрын
Hi This is for sale
@aaronbowe99975 ай бұрын
That black floor looks bitchin!! The stain came out rad aswell!! Well done
@TylerCary5 ай бұрын
Thank you!
@wilfredolopez47685 ай бұрын
When I was pulling mines out , half stayed in my hand and the other half stayed on the bottom. Question if it comes apart is it still good ?
@mackharris65365 ай бұрын
I’m planning on buying cause I have so much stuff in my garage and I want to able to store my stuff in a trailer
@checko7035 ай бұрын
What size of tires do you have on this truck ??
@TylerCary5 ай бұрын
35” 12.5 wide 17” wheel
@checko7035 ай бұрын
Do you have to program the tpms sensors ??
@TylerCary5 ай бұрын
@@checko703 they automatically connected when i turned the truck back on
@checko7035 ай бұрын
Nice thanks i like the look on your truck i have the same one but silver and im thinking on ordering the same set up
@justaguy4real5 ай бұрын
im looking underneath and seeing those BFG AT letters. Great tires. I prefer letters out tho, just looks sportier to me. Nice truck buddy. Great video.
@pauldiaz96025 ай бұрын
Hello. I took your advice and purchased one. I’m really happy with my decision. I wanted to ask you do you use this CTS to create your separations? I haven’t done that yet. Just kind of curious how you set your jobs up
@TylerCary5 ай бұрын
I take all my art from illustrator or photoshop and separate it using sep studio nxt. After that I “print” it to a hot folder that drops it into the rip software for the douthitt. Then I release the job to the printer. If you have questions when you get it set up let me know [email protected]
@DM-tf6mk5 ай бұрын
Looks great!
@HeyEricGardiner6 ай бұрын
Did you caulk between any of the side wood and the floor wood? I have a small gap at the rear of the trailer and it feel like I should caulk it first.
@TylerCary6 ай бұрын
I didn’t, there was some already. If you don’t have any I would do the floor first and then do that or silicone after. The epoxy breaks up on the caulk edges so it would be cleaner to do last in my opinion.