DIY Farmhouse Table Made Easy!

Рет қаралды 13,544

Күн бұрын

In this video I will take you through the process of building a kitchen table- DIY style. I will share some tips that I use when building these for clients. Hope you find this video helpful!
Here are some links to the tools I used in this video:
Kreg Pocket Hole Jig: amzn.to/3HLNvTn
Kreg Screws: amzn.to/3xNxo36
Makita Drills: amzn.to/3NbEG6k
Irwin Quick Grip Clamps: amzn.to/3Okji04
Miter Saw: amzn.to/3HOU5Z1
Bostitch Air Compressor: amzn.to/3tZz0p5
Finish Nail Gun: amzn.to/3yfi6Fy
Finish Nails: amzn.to/3QGisMG
Circular Saw: amzn.to/3OBGiar
Speed Square: amzn.to/3u2oflZ
Tape Measure: amzn.to/3tYPjTc
Hand Sander: amzn.to/3Ngrih5
Sandpaper: amzn.to/3OmYipq
DISCLAIMER:
Videos produced by 508Homes are provided for informational purposes only. All material provided within this video is for informational, educational, & entertainment purposes only. Some of these projects, materials, and techniques may not be appropriate for all ages or skill levels. Please use all safety precautions while following any instructions or concepts provided by this video. Viewers must be aware that by doing projects on their homes they are doing it at their own risk and 508Homes cannot be held liable if they cause any damage to their homes. It is the sole responsibility of the viewer to educate themselves on their local codes and regulations before undertaking any sort of project. Always have safety in mind and have fun!
This video and description contains affiliate links, which means that if you click on one of the product links and make a purchase, I will receive a small commission at no extra cost to you. This helps support this channel and allows me to continue to make videos like this. Thank you for your support!

Пікірлер: 39

@jocktheglide Жыл бұрын

awesome a video about a farmhouse table where basic tools were used vs other videos having 1000s of dollars of tools used.

@508homes Жыл бұрын

Thanks for the feedback! Just trying to show people how they can do it without an entire workshop.

@stevebright3514 3 жыл бұрын

Very easy to follow and nice use of the 4X4s!

@508homes 3 жыл бұрын

Thanks for the like and nice comment!

@mikedisimile2478 3 жыл бұрын

Great job explaining everything thank you 👍

@508homes 3 жыл бұрын

No problem! Hope this helps anyone who wants to make their own

@fixitFlip 3 жыл бұрын

Awesome job!

@508homes 3 жыл бұрын

Thanks Flip! Love your channel.

@rodneyfruhling5128 Жыл бұрын

Awesome job man

@508homes Жыл бұрын

Thanks Rodney!

@KeyFobRob 3 жыл бұрын

Thanks!

@508homes 3 жыл бұрын

Thanks for watching and subscribing!

@frankmarra7380 Жыл бұрын

Nice job, but the end pieces are for expansion and contraction and is supposed to be able to move and they 😊 won’t using pocket hole joinery

@508homes Жыл бұрын

Thanks for the feedback frank! What joinery method would you say is the best for this situation?

@jasonmccormick9779 3 күн бұрын

How did you attach the top to the base? Screws from underneath? Nice looking table.

@508homes 3 күн бұрын

Yes I screwed up from the bottom to hide the screws. I used 2” screws so they wouldn’t poke through the top. Thanks!

@scottrobertson9788 Жыл бұрын

Nice one, came out looking great! Lovely work! I especially like the look of that stringer, with the extra length on each side. Have you had any issues with the breadboard ends? I would’ve thought the boards running lengthwise down the table would’ve put some pressure on the ends, when it gets hotter or colder. Inspiring to watch, thanks for posting!

@508homes Жыл бұрын

Thanks Scott! The table as a whole has lasted outside for multiple years and seasons now. It is under a covering but open to temp changes and still looks as great as it did the first day I made it!

@MikesLeTour83 3 жыл бұрын

Nice table! Are you building benches or chairs for it too? Please post a photo after you put the finish on it.

@508homes 3 жыл бұрын

The customer already had a set of chairs they are using. I stained the table to match those chairs. I will post a video soon of the finished product. Thanks for watching!

@MikesLeTour83 3 жыл бұрын

508Homes - Thanks for replying. I look forward to more of your videos!

@1967onebob 2 ай бұрын

The table will probably crack because of how you screwed the end pieces. Your end pieces will prevent expansion.

@508homes 2 ай бұрын

Thanks for the input. 3+ years going strong and no problems!

@alvarobarrientos-cg7cq Жыл бұрын

Great video, I really enjoyed watching the build. Are the plans for sale?

@508homes Жыл бұрын

Thanks Alvaro! I haven’t looked into selling plans at this point but maybe I will at some point soon.

@gerrywidmer 3 жыл бұрын

Been looking for this easy table..it's great! my only question is what is the overall dimensions and the length of your cross braces? Thanks!

@508homes 3 жыл бұрын

Thanks Gerry! I believe these measure 12' from outer point to outer point. I usually mark halfway up on my vertical leg piece, cut one cross brace and hold it up to make sure it does not overlap the halfway point. Once I like the length of my one "test" piece, I cut the rest of them to the same length.

@gerrywidmer 3 жыл бұрын

@@508homes perfect. Thank you! Keep up the great content.

@508homes 3 жыл бұрын

@@gerrywidmer thanks!

@kraftevol Жыл бұрын

The link above for the miter saw was a Bosch but in the vid it’s a Kobalt. What model was the latter? Was it bad that you changed it?

@508homes Жыл бұрын

I must have provided the wrong link I’m sorry. Same specs 10” miter sliding bevel. Love the kobalt but have heard great things about the Bosch as well.

@412scott 3 жыл бұрын

How is the table holding up? Any cracks?

@508homes 3 жыл бұрын

Still looks brand new! Check out my other farmhouse table build on my channel to see the finish job! Staining the table the correct way and sealing it can really impact its lifetime.