It's a trick. Create the system, then put it in the freezer, wait for it to generate frost, take it out and record it until it defrosts. You edit the video in reverse, where it is defrosting. This will look like it is freezing. I have already carried out all the tests with the materials you use in the video and IT DOES NOT WORK!!. IT'S A TRICK!!...

Bagus Sekali

Valeu muito obrigado!

What is the description for the compressor in order to purchase it or... Where can one purchase the compressor?

Any larger iterstive designs in mind? Great job : )

Pls what is the name of the pump/motor?

If you look at the fan closely when he's spinning it around, you can see frost on the fan. The whole thing just came out of a freezer.

These are interesting if it works, reminds me of a propane refridgerator in an rv, at low pressure and flame to burn off the gas. These low pressure systems work but to some degree they are flawed. These air pumps can push 30 psi easy so this system works in my book. The arm chair techs are like naaa man....

Super mini clima, MOBILIZE technology (:.

Bro this thing you made give me 😅😊 i want use this

Ý tưởng rất tuyệt vời máy làm lạnh đồ uống

great video, tell me, what is the pump reference and the gas used? because it is not specified. Sincerely

In spite of some people's reservations, I think this is interesting. There is nothing wrong inherently in air as a medium. Compressing air quickly will cause its temperature to rise. Releasing compessed air suddenly will absorb heat. Years ago, I inflated a car tyre to full pressure then released the pressure by rapidly removing the valve inner core. To my surprise, there was a thin layer of frost on the tyre valve! QED!

Very very Real!

Hi..What is the pump from that you use..Thank you

Super very nice but how much time it's run sir

This is not going to work. It would come closer to working if the gas was sprayed into the coil from the can. This could work if a piston compressor was used, like a car ac compressor, it could be pedal powered , or hand cranked, even use a large flywheel to spin it while you rest. Even a water wheel the Large comoressor would chill the small coil fast. But the inside of the coil must be evacuated of air before gas is added to chill a can drink. Use of peltier plates is better, use 9-12 v one side of the plate gets cold the other gets hot. Use a can of water to coolbthe hot side. With one onthe bottom and about 5-6 around the can using metal or salt water to make contact with the can , it would likely freeze it in 20 minutes! It can also be used to cool a home, connected to solar panels and heatsinks use aluminum blocks to attach the plates to. Slowly run water through them to keep cool. Under 50-60°c the cold side should be about -5°c the plates sre used to cool computers. And small 12v refrigerator heaters are using them also. But as far as gas refrigerant, butane , co2 , and propane are useable, sealing dry ice inside a compressor coil, then vent the air from the top but it would require alot to be placed inside. Before it sublimated. And propane would be easy also. Just turn a tank upside down, get the liquid inside.. but a car ac compressor is the best bet to get it to work. But car refrigerant is easy to access as well. Why not use it. But adding salt to ice snd stir it eilr running the drink through the ice, eill freeze it if not careful. Itd how ice cream was made years ago. It's a thermal reaction thr trmp drops as the salt melts the ice!

Es impresionante la eficacia del gas butano o propano con poca presión se puede alcanzar muy bajas temperaturas por eso lo usaban antes los refrigeradores pero su único defecto es lo explosivo que es lo bueno es que se mejoro con el r600a que lleva en la mezcla butano

Which type of gas use in there pipes

Холодильник в автокемпире работает от пропана или бутана по такому же принципу? Ели да, то значит стстема эта рабочая. Я так думаю)

You know whether or not this video is a trick I don't know. However many of you are comparing are EPA approved refrigerants R134 R11 etc and the list goes on. With butane does not nearly require the pressures like R 134 when we built one of these it was somewhere around 27 PSI to 30 PSI. Start thinking outside the box gentleman. It's obvious some of you are in the ac refrigerant world. But there are things that are not in your EPA approved workbooks. That information can be found in high school chemistry class. You'll be amazed at what you can make.

The compression ratio of the gas cannot be achieved with the motor pump. The pump's job seems to be something like a check valve. And the inner diameter of the capillary tube seems too wide. When the refrigerant is put between the capillary tube and the pump (check valve), it is compressed and liquefied, so at this time, it is beyond the capillary tube. The pipe will be in a state of low pressure. That is, when the refrigerant is first administered, the temperature will drop due to evaporation only for a short time. Operating the pump can be viewed as just a sound effect. For example, if you spray the spray on your hands, your hands will be cool. It's just a feeling, and you'll find the rating right away at room temperature.

What if we don't use the circulating pump, and just add butane into the copper coil?

fake video i have done maney time not working

Your chanell persian? I'm can speak persian😊

I'm going to make this to expose these fakes

The diameter of the throttling pipe is too large and the configuration is unreasonable. No vacuuming either

пропан газ

Guys someone say Is it is working or it is fake if someone made this project just plz tell

HAHA, AND HOW MUCH PRESSURE DO YOU NEED TO TURN THE GAS INTO LIQUID AGAIN? TAKE THE TABLES CHECK PRESSURE AND TEMPERATURE. THE MOST OPTIMISTIC 600A, THIS PUMP IS TOO WEAK!!! FAKE!! NO THIS IS SUPER FAKE!!

This is just a reverse video.... He kept the project in refrigerator and remove it and record the video... And reverse the video😂

Sar Ek Mujhe banaa kar de do

এই পাইপের দামকত বললেন নাতো?

مستحيل يحدث تبريد بدون ضغط عالى للغاز

Please don't waste your time trying to do this. Super fake, freezers use AC compressors for a reason, one being torque. A little $12 dc pump will lock the second it's pressurized. I could go on. They could have at least used hose clamps...

porqe no lo pones en el mercado te iria bien

Fake!

Rough Hands and Unusual Ideas Can I make this on a bigger scale?

everybody seems to be building this nowadays. i think this is rather a new invention from among tinkering diy people.

I don't know Rick, it looks fake, (No lo sé Rick, parece falso)

It's faque video

Охлаждать банку не интересно. Сделай генератор воды из атмосферы.

Complete Fake ? The Compressor does not the neceaasry pressure to compress a refrigerant , it normally requires 140 psi to cool successfully

reverse play scam

the fan shuth be on the hot npipes, you puted in the freezer then with the fan get the humed air condensed on the previously frozen pipes, ALL FAKE

Fake video 😂😂😂😂😂

ITS FAKE NOT WORKING ITS FAKE

fake

Fake

Another fake.

Fake video

It's fake. I unsubscribed your channel

It's fake

All these type vids is one guy🤣same tools same glue same type of working,

Is this real or fake?

*I created something stupid like this and froze the entire Sahara desert for weeks*

fake